Medienos apdirbimo staklės pirkti naudotą (234)

Sąlyga: naujas, Gamybos metai: 2025, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine tilts via handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta switch Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to one side to approx. 25° for sharp angles, and tilted flat to the left up to 30° Godpfx Absi Dfidjmjuk Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Woodworking Machines / Spindle Moulder Minimax twf55 es Item No.: 5502261 Robust steel and cast iron construction Anodized aluminum sliding table Large-scale milling unit made of cast iron, tiltable up to -45° to the rear Four milling speeds from 3,500 to 10,000 rpm Right- and left-hand rotation as standard Height and tilt display accurate to 1/10 mm Quick and easy speed change via eccentric clamping Solid and precise cast iron table, stress-free and annealed for long-lasting precision Powerful 5.0 kW industrial motor Curved milling protection hood included Made in Italy Dimensions and Weights Length (product): approx. 1200 mm Width/Depth (product): approx. 2000 mm Weight (net): approx. 510 kg Extraction Connection Extraction port diameter: 2 x 120 mm Work Table Work table length: 1200 mm Work table width: 530 mm Table height: 900 mm Sliding table length: 1200 mm Sliding table width: 360 mm Sliding table height: 142 mm Installation Information Required length: 2800 mm Required width/depth: 2910 mm Explanation required space: The dimensions take into account maximum travel or usable lengths. Machine body length: 1200 mm Machine body width/depth: 846 mm Working area length: 1600 mm Working area width/depth: 2300 mm Explanation working area: Please add the specified measurements to the required space to determine the recommended free installation area for the machine. Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Drive motor power: 5.0 kW Spindle Spindle tilting: 0 to -45° Usable spindle length: 125 mm Spindle speed(s): 3500/6000/8000/10000 rpm Spindle speed display: LED on the machine front Spindle shaft diameter: 30 mm Max. Milling Tool Diameter Max. tool diameter: 240 mm Max. lowerable tool diameter: 230 mm Max. profile milling diameter: 240 mm Max. tenoning cutter diameter: 320 mm Gedpfxsi Dphts Abmsuk EQUIPMENT Equipment Aluminum sliding table: ✔ Spindle fence: Heavy‑duty professional version with hold-down, safety guard, and aluminum fence cheeks Telescopic mitre fence: with two flip stops Extension table: ✔ Curved milling guard: ✔ Eccentric clamp: ✔ Sliding table handle: ✔ Spindle height adjustment: manual Spindle tilt adjustment: manual Control: manual height and tilt adjustment of the milling unit Control element position: on the machine body Location: In stock at 54634 Bitburg - Available immediately -

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner Gsdpfxoqlck Ne Abmeuk 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Planer-thicknesser with TERSA quick-change cutter knife system. With TERSA quick-change system for changing planer knives in seconds. The TERSA cutterhead system enables particularly quiet operation. Helically serrated steel infeed roller ensures consistent and uniform material feed. Robust surfacing tables made from ribbed, stress-free cast iron; milled and permanently flat, making them resistant and durable. Large, swiveling fence for precise jointing, adjustable 90°/45°, with quick clamping. Surfacing table opens to the rear. High-performance motor. Sturdy steel/cast iron construction. Long-hole drilling unit retrofittable. Equipment Details: Gjdpfx Aodqy Uqebmeuk TERSA cutterhead No more adjustment and screwing required Planer knife change in seconds Self-locking Particularly quiet operation Perfect planing results Surface Planer: Standard equipped with TERSA quick-change cutter knife system Large-dimensioned surfacing tables The surfacing and thicknessing tables made of cast iron guarantee maximum running smoothness and vibration-free operation. Thickness Planer: With powerful thickness feed, workpieces up to 200 mm in height can be planed. The helically serrated infeed roller guarantees consistent feed. Changing over from surface planer to thickness planer is done in seconds and with a single hand movement. Drive: Stably designed chain drive Drive wheels made of steel Solid cast iron bearing support Planing Unit: Heavy-duty kickback protection devices prevent workpiece kickback. 3-knife TERSA cutterhead ensures an optimum planing finish. Special Features: Large fence, adjustable 90°/45° for precise jointing with quick clamping Scope of delivery: Large fence, adjustable 90°/45° for precise jointing with quick clamping TERSA cutterhead Model: minimax fs 30g TERSA Item No.: 5503036 Technical Data ---Technical Data Surfacing--- Total table length: 1200 mm Infeed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. depth of cut: 3 mm ---Technical Data Thicknessing--- Thicknessing table dimensions: 450 x 300 mm Min./max. working height: 3/200 mm Feed speed: 6 m/min Cutterhead diameter/knives: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction port diameter: 2 x 120 mm Weight: 140 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, IE3 motor standard Maximum air volume flow up to 10,000 m³/h at the fan Approx. 73 m² filter area Pre-separator standard 71 dB(A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 Gujdpfx Asdqzhhobmjk H3 residual dust content reliably maintained at 0.1 mg/m³ (wood dust) Models with type-tested rotary valve (FSA) Certified backdraft damper Integrated automatic extinguishing system 350+ P Inlet diameter: 355 mm Rated motor power: 15.0 kW / 3Ph Voltage: 400 V / 50 Hz Max. air flow: 10,000 m³/h Nominal air flow*: 7,127 m³/h Negative pressure at nominal volume: 3,347 Pa Filter area: 73 m² Chip collection volume (net / gross): 3 x 165 L / 3 x 241 L Sound pressure level: 72 dB(A) Dimensions (L x W x H) in mm: 3,112 x 1,058 x 2,361 Weight: 1,074 kg

Sąlyga: naujas, Gamybos metai: 2025, Rehnen Shelf Trolley Varioflex Flexible Paint Drying Trolley Robust tubular frame construction 17 shelves Extendable and lockable from 200 to 2000 mm 4 polyamide swivel castors Load capacity: 400 kg Support tubes galvanized Optional: Additional rack Length: 200–2000 mm Depth: 870–1180 mm Height: 1980 mm Support tube length: 650 mm Fully extended up to: 1150 mm Clear spacing between tubes: 60 mm Load capacity: 400 kg Available immediately Gedpfxsbumtij Abmouk The trolley can also be shipped within Germany for €75 net.

Sąlyga: naujas, Gamybos metai: 2025, Al-Ko clean air dust extractor Gsdpfx Abjbuvbremeuk Ex-demo unit (zero operating hours – as new) Technical Specifications Power Unit 250 P Inlet diameter: 250 mm Rated motor power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air flow rate: 4,900 m³/h Rated air flow rate: 3,524 m³/h Negative pressure: 2,451 Pa Filter area: 22.4 m² Chip collection capacity: 2 x 250 L Dimensions (L / W / H) in mm: 2,305 x 994 x 2,351 Weight: 758 kg Location: ex stock 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Powered thickness table lift with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal threaded spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thickness table Standard noise and chip protection curtain at workpiece infeed and outfeed Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSA models with Tersa cutterhead Cutter change in seconds When the machine starts, the cutters are tensioned automatically by centrifugal force—self-locking The knife protrusion adjusts automatically without the use of setting gauges Work Table The work table is mounted on four large trapezoidal threaded spindles, which ensure maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting device, the table position remains perfect even without locking Helically geared steel infeed rollers for constant and even wood feed Second, rubberized feed roller at the outfeed Heavy-duty anti-kickback fingers prevent kickback of workpieces A 4-knife cutterhead ensures optimal planing results Dimensions and Weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Dust Extraction Connection Extraction port diameter, thickness 150 mm Drive Power Main motor 7.5 kW Installation Information Required space length 1170 mm Required space width/depth 1003 mm Required space height 1197 mm Installation note: Dimensions account for maximum stroke or usable lengths. Machine body length 1170 mm Machine body width/depth 705 mm Length 1000 mm Width 2000 mm Note on working area: Please add the specified dimensions to the required space in order to obtain the recommended free installation area for the machine. Thickness Thickness table length 520 mm Thickness table width 1000 mm Minimum working height 3.5 mm Maximum working height 250 mm Minimum working length 210 mm Gjdped Hx E Iofx Abmouk Maximum depth of cut 8 mm Electrical Data Connection voltage 400 V Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs. Speed 4500 rpm Maximum planing width 520 mm Feed Feed speed 5/8/12/18 m/min

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The robust Junior R1 offers all the features required of a modern edge sanding machine. A solid cast iron sanding unit with a powerful motor ensures maximum sanding performance. The height-adjustable worktable, spring-loaded for easy adjustment, allows for optimal belt utilization and safe operation. Optional equipment includes belt oscillation, infinitely variable unit tilting, veneer sanding attachment, and an additional table for sanding work at the deflection roller. The machine is supplied with a set of sanding belts; also included are an angle and mitre guide. Gsdpfx Absd R Ev Djmsuk Technical specifications: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. • Table size: 750 × 350 mm • Required space: 1000 × 800 mm • Weight: from 180 kg • Extraction port Ø: 100 mm Location: Ex stock 54634 Bitburg - free loaded - Can be shipped for an additional fee.

Sąlyga: naujas, Gamybos metai: 2025, Display unit – being sold at a special price Gujdpfxocdy I Te Abmek For sale at a special price Technical Data 300-P Inlet diameter: 300 mm Motor power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. air volume flow: 6,000 m³/h Rated air volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter surface area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special feature: Unit is equipped with a silencer – therefore extremely quiet – can be sold with or without the silencer Location: Available from stock 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, for machining smaller parts, especially solid wood Simple and safe operation Combination sanding unit with sanding pad for calibrating solid wood Control panel on the front side Standard with ribbed steel roller diameter 120 mm and hard sanding pad with graphite lining on a replaceable insert Motorised height adjustment of the worktable Electronically controlled sanding belt oscillation Manual star/delta motor startup Mechanical measurement of table position Ammeter for indicating the current draw of the sanding unit Two feed belt speeds Electromagnetic brake Combination unit for calibration and sanding Ribbed steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite overlay Universal design for calibration and sanding work on solid wood Gujdpecnw U Rofx Abmjk Model: BBS 630 C Article number: 5343065 Technical Data Working width: 630 mm Diameter of working roller: 120 mm Sanding belt width: 650 mm Sanding belt length: 1600 mm Sanding belt speed: 18 m/s Min./max. workpiece height: 3/160 mm Feed speed: 4.5 / 9 m/min Motor power: 5 kW / 400 V Feed motor: 0.43 kW Height adjustment motor: 0.18 kW Compressed air consumption: 20 l/min Operating pressure: 5.5 bar Operating pressure for belt blower: 8 bar Extraction pipe diameter: 150 mm Extraction capacity: 3,000 m³/h Dimensions (mm): 600 x 1010 x 1500 mm Weight: 770 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, FS 41 Classic Tersa – Surface & Thickness Planer with TERSA Quick-Change Knife System Features: - Equipped with TERSA cutterhead for fast, tool-free knife changes within seconds - TERSA knife system ensures particularly quiet operation - Helically grooved steel infeed roller for consistent and uniform material feed - Extra-long, one-piece surfacing tables allow for easy straightening of workpieces - Large, robust fence remains in position when opening surface tables - Surface tables open to the rear for ergonomic access - High machine weight ensures maximum precision and vibration-free operation - Powerful industrial-grade motor - Heavy-duty steel and cast iron construction Model: FS 41 Classic Tersa Article No.: 5503414 Technical Data --- Surfacing (Jointer) Specifications --- Total table length: 1800 mm Infeed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. depth of cut: 4 mm --- Thicknessing Specifications --- Thickness table dimensions: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min. Cutterhead diameter/knives: 72 mm / 3 pcs. Cutterhead speed: 5200 rpm Motor: 400V/50Hz/S6 40% power cycle, 5.0 kW (6.6 HP) Extraction port diameter: 2 x 120 mm Weight: 270 kg TERSA Cutterhead - No adjustment or screwing required - Knife changes in seconds - Self-locking mechanism - Exceptionally quiet operation Cutter Block - Heavy-duty anti-kickback devices prevent material kickback - Tersa 3-knife cutterhead delivers optimal planing results Material Feed - Helically grooved steel feed rollers for constant and uniform wood feed without marking the material - 13 teeth simultaneously engage the workpiece for powerful feed - Wear-free compared to rubber feed rollers Guodpfxscnxays Abmok Dust Extraction Connection - Both surfacing and thicknessing extraction ports are aligned in the same direction - Hose connection is accessible from one side only - No hose routing required around the machine

Sąlyga: naujas, Gamybos metai: 2025, Maximum equipment for professionals. Multi-function combination machine with TERSA cutterblock, mitre cutting device, and tilting spindle moulder. Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is maintained even when the scoring saw blade is installed. Scoring unit with a separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from outside. High-precision sliding table made from anodised aluminium, running on hardened and milled steel guide rails. Large outrigger (1200 x 650 mm) with support roller and extendable aluminium telescopic stop, adjustable up to 3300 mm. Saw unit tiltable from 90° to -45°. Tilting spindle moulder from 90° to -45° towards the back into the fence. Four spindle speeds. Spindle moulder with forward and reverse rotation. Quick conversion to thickness planer thanks to parallel opening surfacing tables. Two-speed feed on the thicknessing table. Helical steel infeed roller for consistent timber feed. Three independent industrial motors. With separate saw rip fence and separate jointing fence. With lockable main switch. Equipment details: Format fence Immediate control Outrigger Outrigger with angle-adjustable telescopic crosscut stop, with degree scale. Sliding table with ball-contact system Made from anodised aluminium. Guides made of hardened and ground F550S steel, 15% harder than conventional steel. Rails are riveted, not glued. Smooth-running, quiet and reliable. 10-year HOLZKRAFT warranty on wear of the hardened guideways. Cast iron dual trunnion saw unit Height adjustment via dovetail guide. Extremely robust and torsion-resistant for precise cuts. Located close to the saw blade, supported on both sides. Height and tilt adjustment up to 45°. Scoring unit as standard with separate scoring motor 0.55 kW. Dual trunnion spindle moulder unit Large dimensioned, tilting dual trunnion spindle moulder unit made of cast iron. Spindle fence Heavy-duty professional design. The high-quality cast iron spindle fence comes as standard with fine adjustment. 3-position for fast repeat settings. Fine adjustment via rack-and-pinion, numeric display, and aluminium fence faces. Planer units Helical steel infeed rollers for constant and even timber feed. Massive anti-kickback devices prevent workpiece kickback. 4-knife Tersa cutterblock ensures optimal planing finish. Table lips provide quieter operation. Tersa planing cutterblock No more setting and screwing. Cutter change in seconds. Self-locking. Particularly quiet. Thicknessing table The thicknessing table is mounted on four large-dimensioned spindles, ensuring maximum stability under all working conditions. A special lifting mechanism maintains the position of the table safely even without locking. Rip fence With fine adjustment and quick clamping. Stable round bar guide made of ground steel. Gjdpfecnxa Sex Abmouk Repositionable aluminium scale. No dimensional gap as guide rods are overlapping. Separate surfacing fence Large professional version (1800 x 150 mm). Tiltable 0–45°. With quick adjustment. Stable round bar guide made of ground steel. Simultaneous opening. Type: No. 5500557

Sąlyga: naujas, Gamybos metai: 2024, Axle: 920 mm X-axis: 3000 mm Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Guodpfecnz H Hex Abmek Minimum dimensions: Plate: x = 300 mm y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade operates in the X-direction. Maximum cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 Volt Required extraction capacity: 2300 m³/h Location: Ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Panel Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tilting saw blade and anodised aluminium sliding table Gsdpfjxw N N Hsx Abmsuk Article Number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Net weight approx.: 690 kg Extraction connection Extraction port diameter: 120 mm Saw blade guard extraction port diameter: 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (motor rating): 7.0 kW Rated duty type, main drive motor: S6 Duty cycle, main drive motor: 40% Sliding Table and Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. crosscut width left of saw blade: 3200 mm Edging length: 3200 mm Saw blade tilting range: 90 - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Explanation max. cutting height: Independent of scorer Saw blade diameter: 400 mm Explanation saw blade diameter: Independent of scorer Saw blade speed: 3500/5000 rpm Scoring Unit Scoring saw blade diameter: 120 mm Scoring saw blade speed: 9200 rpm EQUIPMENT Equipment Scoring unit with separate scoring motor Anodised aluminium sliding table Handle for sliding table On/off switch on sliding table for main and scoring saw motors Edging frame Material roller on edging frame Rip fence with round bar guide Stops: Two professional flip stops Edging shoe Eccentric clamp Table width extension Table length extension Overhead blade guard Motorised height adjustment and tilting of the saw unit, digital tilt display Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Compact wide belt sanding machine with combination sanding unit With special action equipment - Top condition - Special Action Equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning via push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine height adjustment of the working table Clear control panel on the front Robust, tube-reinforced monoblock steel machine body, robot-welded, work units mounted high up for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Conveyor belt feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers in front of and behind each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite backing Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical Data Length (product) approx. 1388mm Height (product) approx. 1668mm Width/depth (product) approx. 1545mm Extraction connection Extraction nozzle diameter 140mm Electrical data Supply voltage 400V, AC Phase(s) 3Ph Supply frequency 50Hz Feed motor power 0.33 / 0.55kW Height adjustment motor power 0.25kW Drive motor power 7.5kW Sanding unit Sanding belt length 1525mm Sanding width max. 950mm Sanding belt width 970mm Feed unit Guedpfxjxac E He Abmjk Feed speed 4.5 / 9m/min Workpiece Workpiece height min. 4mm Workpiece height max. 170mm Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, LAMELLA – CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration comprising: - Stable, torsion-resistant steel frame in welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcase joints - Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick coated support plates - Continuous pressing surface with a height of 95 mm on the bottom vertical press beam - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance lead nuts with grease reservoirs - Pressing is carried out electromotorically via 2 separate worm gear motors (2 x 0.75 kW) Guedpew Td A Isfx Abmsk - The pressing force of the press beams is infinitely electronically adjustable via 2 potentiometers and controlled by frequency inverters, thus the pressing force regulation is absolutely wear-free - Pressing force for horizontal press beam min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for the vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Easiest operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Completely overhauled by Ganner, parts warranty 6 months Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2016, LAMELLA - CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: - Sturdy, torsion-resistant steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation system (Ganner system) for tightly pressed carcase joints - Counter-pressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Pressing is performed electromotively via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is steplessly electronically adjustable via 2 potentiometers and controlled by frequency converters, making the press force regulation completely wear-free - Pressing force for horizontal press beam min. 500 daN (kg), stepless up to max. 2200 daN (kg) Pressing force for vertical press beam min. 300 daN (kg), stepless up to max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second Extremely easy operation - Working height/loading height: 300 mm - Working dimensions: length min. 150 mm, max. 2500 mm; height min. 150 mm, max. 1400 mm; depth: 700 mm Machine no. 563.624 400V, 3-phase, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Gedpfsxvitijx Abmouk Fully overhauled by Ganner, parts warranty 6 months Location: from stock 54634 Bitburg - Immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1994, Bäuerle storio obliavimo staklės DM 630 su storio stalo prailginimu Obliavimo plotis: 630 mm Obliavimo aukštis: 260 mm Centrofix peilių velenas Z = 3 Guminis įtraukimo ir ištraukimo volas Gjdpfx Ajxgbwujbmjuk Elektrinis stalo reguliavimas su skaitmeniniu ekranu Pagrindinis variklis: 7,5 kW Pajėgos greitis: 7 + 14 m/min Nusiurbimo jungtis: 160 mm Matmenys: 1150 x 1120 x 1060 mm be stalo prailginimo Svoris: apie 1260 kg Vieta: sandėlyje, 54634 Bitburg - galima iš karto -

Sąlyga: labai geros būklės (naudotas), 12 mm rung punch Used, excellent condition Manufacturer: Schleicher Godpow Hlztofx Abmeuk 12 mm rung blade Support table on the right with stop slider Space requirement approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Location: 54634 Bitburg, free loaded, unpacked Transfer in as-inspected condition, without warranty or guarantee

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 90 t, cilindro skersmuo: 85 mm, eigos ilgis: 350 mm, cilindrų skaičius: 6, TECHNINĖS DETALĖS Elektros kaitinimo plokštės: 3.000 x 1.300 mm Kaitinimo plokščių skaičius: 2 vnt. Bendras spaudimas: 90 t Cilindro eiga: 350 mm Aukštų skaičius: 1 vnt. Aukštų atidarymas: 350 mm Spaudimo cilindrai: 6 vnt. Spaudimo cilindrų skersmuo: 85 mm Godpfx Aoxnyqpebmeuk ĮRENGINIO DETALĖS Darbo temperatūra: 90 °C Maksimali temperatūra: 120 °C Elektrotechniniai duomenys Darbo įtampa: 400 V/50 Hz Jungiamoji galia: 22 kW Šildymo galia: 22 kW Hidraulinio mazgo galios poreikis: 3 kW ĮRANGA Spaudimo stalo judėjimas su krumpliastiebio ir paralelinei kreiptuvais Elektroninis valdymo blokas su jutikliniu ekranu Skaitmeninis laikmatis presavimo trukmei nustatyti Skaitmeninis presavimo slėgio įvedimas ir kontrolė Skaitmeninė diagnostika ir gedimų rodymas Saugos grandinė su dviejų rankų valdymu Avarinė saugos virvė Apatinio spaudimo stalo apsauginė laikiklis EFC Elektroninė lygumo kontrolė Auksu anoduotos kaitinimo plokštės (Busse) Pastaba: Išmontavimą ir pakrovimą galime pasiūlyti už maždaug 1.200 € be PVM.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1994, Josting faneros paketo pjovimo staklės Tipas: EFS 2300 L – 1994 m. Pjovimo ilgis: 2300 mm Maks. įdėjimo aukštis: 80 mm FIESSLER apsauginė šviesos užuolaida Pozicijos nustatymo šviesa pjovimui Paralelinis ribotuvas, reguliuojamas motoriškai, tikslus reguliavimas rankiniu ratu Galia: 7,7 kW Svoris: 2700 kg Gedpfxjxgbwze Abmsuk Matmenys: 3610 x 1700 x 1680 mm Iš vietos: - galima iš karto -

Gamybos metai: 2014, Sąlyga: labai geros būklės (naudotas), Achse 920 mm x-Axis 3000 mm Material thickness Z 12 mm - 30 mm Feed speed 20 m/min. A-Axis 360 degrees Minimum dimensions: Plate: x = 300 mm Gujdpfx Absfmdcqemsk y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in the X direction Max. cutting depth with saw blade: 10 mm Motor 0.75 HP, 400 Volt Required extraction capacity: 2,300 m³/h Location: arriving at stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Description Technical data Scope of delivery Accessories Equipment options Ideal for demanding craftsmen and joiners The especially long one-piece planer tables ensure easy planing of workpieces Work tables are made of cast iron, making them resistant and permanently flat Rearward, simultaneously opening planing tables with spring support for fast and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose when converting, saving valuable working time Helically grooved steel infeed roller ensures constant and even wood feed Rubber outfeed roller at the thicknessing exit ensures smooth wood extraction Material feed with four selectable speeds Thicknessing table adjustment via handwheel with integrated thickness height display DIGITAL version: with electric thicknessing table height adjustment and digital display On/off switch in operator’s position Powerful industrial motor High machine weight guarantees top precision and smooth operation Prepared for slot mortising unit Quality Made in Italy Dimensions and weights Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer (Jointer) Total table length: 2250 mm Max. planing depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Godsff Hdpopfx Abmeuk Dust extraction connection Thicknesser extraction port diameter: 1 x 120 mm Drive power Main motor: 7 kW Installation information Required space length: 2250 mm Required space width/depth: 1440 mm Explanation required space: The dimensions take into account maximum traverses or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Min. working height: 3 mm Max. working height: 240 mm Min. working length: 220 mm Max. planing depth: 5 mm Electrical data Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Sąlyga: naujas, Gamybos metai: 2025, Rojek Panel Saw PF 350 Industrial Version Guedpfx Aben D Arhomok The machine design incorporates numerous technical innovations that enhance the practical usability of this unit. Its high-quality workmanship places this panel saw among the best in its class. The machine comes standard with an aluminum sliding table CV 360T, featuring highly precise and stable mounting on hardened rods. Optional equipment includes the more rigid, multi-chamber construction aluminum sliding table CV 400T, with a precision steel rod mounting. Size of the aluminum sliding table: 400 x 3200 mm. Precision and reliability are ensured by the robust cast iron chassis with substantial tilt segment guides for the sawing mechanism and an independent motor for the scoring unit. TECHNICAL DATA Saw Motor power S6 40%: 7.5 kW / 3×400 V Motor speed: 2,870 rpm Maximum blade diameter with scorer: Ø 350 mm Spindle diameter: 30 mm (1″) Saw blade spindle speed: 4,450 rpm Max. cutting height: 120 mm (83 mm at 45°) Saw blade tilting: 0° to 45° Max. cutting width: 1,300 mm Scoring unit Scoring motor power: 0.75 kW (1 kW) Scoring blade diameter: Ø 120 mm (100 mm) Spindle diameter: Ø 20 mm Speed: 8,530 rpm Machine dimensions Length: 3,355 mm Width: 3,450 mm Table height: 892 mm Max. machine height: 1,460 mm Table size: 1,185 x 500 mm Extraction port diameter: 100 + 100 mm Gross weight: 680 kg Net weight: 675 kg Aluminum Sliding Table CV360T Table size: 3,200 x 360 mm Support frame size: 1,240 x 650 mm Cutting length: 3,200 mm Power supply fuse: 16 A (25 A) Sound pressure level (without equipment): 81.8 dB(A) Sound pressure level (with equipment): 85.3 dB(A) Location: In stock at 54634 Bitburg - Available immediately -