Metalo apdirbimo staklės ir įrankių staklės pirkti naudotą (150)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, Control: Mazatrol M Plus Travel paths: X - 1660 mm / Y - 760 mm / Z - 660 mm Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle taper: SK 40 Tool changer: 24 positions Spindle speed: 7,000 rpm Table effective area: 2,000 x 760 mm Table load capacity: 1,000 kg Rapid traverse (X, Y axes): 24,000 mm/min Rapid traverse (Z axis): 20,000 mm/min Feed rate: 1 – 5,000 mm/min Machine weight: approx. 8,700 kg Gedpfx Aevrxd Hobmeuk Including chip conveyor and coolant system. The machine can be inspected under power.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Table clamping surface: 600 x 300 mm Coordinate travel: X 350 / Y 250 mm Guedow Hyfyopfx Abmjk Adjustment range W-axis (motorized): 200 mm Servo-controlled EDM axis Z: 340 mm Drilling with electrodes from Ø 0.2 to 4 mm Max. workpiece weight: 300 kg Connected load: 3.5 kVA Machine weight: 700 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1979, Drilling capacity: 32 mm Spindle taper: MK 3 Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Column diameter: 115 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 0.9 and 1.3 kW, pole-changeable Power supply: 380 Volt, 50 Hz Spindle speed adjustment via 2 gearbox stages, 2 motor speeds, and stepless variator drive Table height adjustment via hand crank Machine lamp Quick-release drill chuck 1 to 13 mm Required space (L x W x H): 1200 x 650 x 1900 mm Weight: 400 kg Gjdpfx Asw H Namsbmsuk Very good condition

Sąlyga: geras (naudotas), Gamybos metai: 2001, movable headstock 10 axes Speed 8,000 rpm C-axis TOOL CARRIAGE (X1-Y1 / X2-Y2) - 2 independent cross slides with 2x5 tools - Drive unit 8,000 rpm for max. 4 driven tools on X2-Y2 Gusdpsw Exk Sofx Abmsk FRONT UNIT (X3-Z3) - Cross slide with 4 positions SUB-SPINDLE (X4-Y4-Z4) - Speed 6,000 rpm - Slide with 3 independent axes SUBSEQUENT OPERATIONS - Holder with 7 positions (4 end and 3 cross) Workpiece conveyor Coolant pump 20 bar KNOLL chip conveyor Bar feeder ROBOBAR 532, 3m bars

Sąlyga: geras (naudotas), Gamybos metai: 1992, Kapitalinis remontas 1992 m. (pagaminimo metai 1969) Srieginių pjovimas Daugiakampių apdirbimas 1x sriegimo galva 2x sriegimo velenai Strypų padavėjas Giovanni Cucchi DBMF 26 (pagaminimo metai 2001) Gujdew I D Tpepfx Abmsk Daugybė priedų

Sąlyga: geras (naudotas), Gamybos metai: 2011, Control: FANUC Gedpfx Absvzrk Ssmsuk Max. workpiece diameter: 220 mm Max. workpiece weight: 20 kg Max. turning length: 175 mm Max. spindle speed: 4,500 rpm Travel range: X = 660 mm, Z = 300 mm Tool changer with 12 stations Chip conveyor

Sąlyga: nepatikrintas (naudotas), Gamybos metai: 1989, Funkcionalumas: nepatikrintas, Šlifavimo sritis: 650x350 mm, Staklės svoris: 2500 kg, Reikia remonto Guedpfx Abexx Tctomsk

Sąlyga: geras (naudotas), Gamybos metai: 2007, Valdymas FANUC 18i-TB Maks. strypo skersmuo: 32 mm Godpsxcx D Djfx Abmjuk Maks. griebtuvo eiga: 310 mm Veleno apsukos: 350 - 7 000 aps./min Maks. priešinio veleno strypo skersmuo: 32 mm Maks. priešinio veleno apsukos: 350 - 7 000 aps./min Naudojamų įrankių kiekis: 21 Daugiapjūvis laikiklis tekinimo įrankiams: 6 Varantieji įrankiai skersiniam apdirbimui: 3 Priekiniai gręžimo įrankiai: 4 Galiniai gręžimo įrankiai: 4 Galinio apdirbimo įrankiai: 4 Varančiųjų įrankių apsukos: 5 000 aps./min Strypų padavėjas FMB turbo 3-36

Sąlyga: geras (naudotas), Gamybos metai: 1995, Judėjimo eiga: X= 600, Y= 400, Z= 420 mm Apsisukimų diapazonas: 20 – 4000 aps./min Pavarų skaičius: 3 Tvirtinimas: SK 40 Pinolės eiga: 75 mm Guedpfow Uin Ssx Abmsk Veleno variklis: 5,9 kW Padavimo diapazonas: 1 – 5000/6000 mm/min (rank./program.) Greita eiga x, y: 7 m/min Greita eiga z: 6 m/min Tvirtinimo paviršius: 900 x 458 mm Svoris: apie 2300 kg Su aušinimo įranga, elektriniu rankiniu ratuku, įvairiais įrankiais (be spintos)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Ritinio išvyniojimo ritinys, didžiausia keliamoji galia 2000 kg, skirta ritinio vidiniam skersmeniui 370–630 mm, didžiausias išorinis ritinio skersmuo, didžiausias ritinio plotis – 500 mm, pavaros galia 4 AG, indukcinis kilpos valdymas, stabdis, bepakopė išvyniojimo greičio reguliacija, svoris 500 kg. Godjxxlcxspfx Abmjuk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 234505A1/0405/33140, Operating pressure: 6–8 bar Weight: 106 kg Dimensions: 0.70 x 0.38 x 1.05 m Notes: Multi-function punch Guodpfx Aoxvp N Dsbmek Air consumption: 18 l per stroke Pneumatic punching operation activated via foot switch

Sąlyga: naujas, Gamybos metai: 2025, Continuous/standard drilling capacity (mm): 20/23 (in E335/ST60) Tapping capacity (pitch-dependent): M12 Spindle: Morse Taper MK II Spindle speed (stepless): 40–4000 rpm Drilling depth (mm): 100 Throat (mm): 240 Column diameter (mm): 82 Usable work surface (W x L) (mm): 340 x 280 T-slot size (arm), spacing (mm), slot width (mm): Number: 2, 125, 13/26 Digital speed display Digital drilling depth display Drill depth stop: quickly adjustable stop ring Feed (mm per revolution): manual Table height adjustment with rack and pinion Motor: 3-phase current 400V with frequency inverter (kW): 1.5 Distance spindle/work surface (mm): 160–880 Machine dimensions without packaging (mm): 355 x 705 x 1825 Machine dimensions with packaging (mm): 572 x 936 x 2142 Weight (kg): 195 Standard accessories: Gujdpsir Ir Tjfx Abmek Tapping device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill guard with electrical interlock Connection cable with CEE plug 3 years warranty for single-shift operation Free delivery NOT THE RIGHT MACHINE? WE ARE A FLOTT AUTHORIZED PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK US FOR AN OFFER!

Sąlyga: naujas, semi-automatic chamfering machine Developed and manufactured in England - automatic chuck with material sensor - automatic spindle start upon movement of the cutting head Guedpfx Asgkah Tjbmek - bar diameter 26-105 mm for smaller Ø a second cutting head is required - adjustable bar support - max. chamfering / turning length 45 mm - turning & chamfering tool - precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet truck - weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified OPTION: - adjustable stop + universal chamfering tool € 1,870,-

Sąlyga: naujas, Gamybos metai: 2025, Thread cutting device OLED display LED lighting Continuous/standard drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Max. thread cutting capacity - R1 M30x3.5 - R2 M24x3 Spindle MT IV Drilling depth (mm) 160 Throat (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Digital speed display Godpfjd Su Agsx Abmjuk Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor, three-phase 400V with frequency inverter (kW) 4.0 Infinitely variable spindle speeds R1 (single-stage) 0-1000 rpm R2 (single-stage) 0-1600 rpm Manual feed Weight (kg) 400 Optional drilling package 6 (€890.00 plus VAT) - [felix] 2.0 150 machine vice - Taper arbor MT IV/B18 - Reducing sleeve MT IV/MT II - Reducing sleeve MT IV/MT III - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery within Germany, including packaging! NOT THE RIGHT MACHINE? WE OFFER OTHER FLOTT PRODUCTS AS WELL – PLEASE REQUEST A QUOTE! FLLOTT AUTHORIZED PARTNER

Gamybos metai: 1997, Sąlyga: geras (naudotas), Material dimensions Gsdpoha Hdhofx Abmeuk max. round: Ø 380 mm max. square: 380 x 380 mm Cutting lengths with single stroke: 10 – 510 mm with multiple stroke: max. 4590 mm Dimensions (LxWxH): 3100 x 2200 x 1850 mm Weight: 3,100 kg

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), Control unit: STE 328-89-1 1/2" complete TOX power package: S75.160.200.12D Table size: 996 x 695 mm Installation height: 600 mm Total stroke: 150 mm Gusdpfx Asp Aul Aobmsk Power stroke: 10 mm Weight: 5,700 kg Electrical connection: 230 V

Gamybos metai: 2001, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 894, Longitudinal table travel (X): approx. 350 mm Cross table travel (Y): approx. 80 mm Vertical table travel (Z): 170 mm Table size: 400 x 110 mm Spindle mount: MK 2 12 spindle speeds: 400–4000 rpm Drive power (max): 0.75 kW Power supply: 400 V / 50 Hz Gusdpfx Aslpcmqjbmek WNT-HSG vice Horizontal milling spindle with side cutter Power cable with CEE 16 A plug

Sąlyga: geras (naudotas), Gamybos metai: 1993, - TRAUB TX 8F control system Guodpfxsldd Iqj Abmjk - Spindle bore: 42 mm - Main spindle speed: 40 - 4,000 rpm - 4 cutoff slides: stroke 60 mm - 8-position turret - High-pressure pump: 25 bar - Rear-side machining (2 spindles) - Bar feeder (3 m) - Chip conveyor

Sąlyga: naujas, Gamybos metai: 2024, NEW FLOTT SB 25 plus Column Drilling Machine - Tapping device - Control panel with OLED display - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Continuous/Standard drilling capacity (mm): 23/25 - Tapping capacity (depending on thread pitch): M16x1 - Spindle: MT III - Drilling depth (mm): 115 - Throat depth (mm): 260 - Usable work surface (W x D) (mm): 420 x 340 - Rack-and-pinion table height adjustment - Stepless spindle speeds (rpm): 20 – 2000 - Dimensions (mm): 430 x 715 x 1800 For further TECHNICAL DATA please refer to the product datasheet! Gujdpfx Aof S Tfnebmjk OPTION Drilling Package 4 (296593) - €595.00 - Machine vice [felix] 2.0 120 - Keyless drill chuck B18 3-16 mm (precision 0.17 mm) - Taper adapter B18/MT III - Reducing sleeve MT III/MT II - Reducing sleeve MT III/MT I 3-year warranty for single-shift operation Delivery: free to your door, including packaging (within Germany) NOT THE RIGHT MACHINE FOR YOU? WE ARE AN AUTHORIZED FLOTT PARTNER AND CAN OFFER YOU THE COMPLETE RANGE OF FLOTT PRODUCTS! REQUEST A QUOTE!

Sąlyga: naujas, Gamybos metai: 2025, Thread cutting device Automatic thread relief device Programmable drilling depth stop Gusdsd H Rh Rspfx Abmsk Drilling depth and speed display - digital Thread cutting device M30 (pitch-dependent) Opt. R1: Spindle speeds with variable gear, speed range 100-2000 rpm Opt. R2: Spindle speeds with variable gear, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle taper MK 4 Drilling depth 160 mm Throat depth 300 mm Usable table size (swivelling) 590 x 450 mm Feed rate 0-300 mm/min steplessly adjustable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor – three-phase, 400 V, pole-changing 1.5/3.0 kW Weight 420 kg Option Drill Package No.6: Taper arbor B18/MK 4, keyless drill chuck B18/3-16 mm, machine vice No. 2 -140 and T-slot bolts, 890.00 EUR Option: Automatic spindle stop at upper drill spindle position, 420.00 EUR Option: Chip break module 420.00 EUR Delivery: free to site including packaging (Germany only) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR AN OFFER! FLOTT AUTHORIZED PARTNER

Sąlyga: naujas, semi-automatic beveling machine Designed and manufactured in England - automatic chuck with material sensor - automatic spindle start when the cutting head is moved - max. speed 1,500 rpm - max. bar diameter 80 mm - adjustable bar support - max. beveling/turning length 37 mm Godpfx Abjcacn Esmsuk - precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with a pallet truck - weight: 500 kg Dimensions (L/W/H): 800x500x1250 mm 1-year warranty CE-certified OPTIONAL: - oil mist cooling €3,250 - adjustable stop + universal beveling tool €1,870

Sąlyga: naujas, Gamybos metai: 2025, High-quality construction The drive roller is crowned (which causes the sanding belt to automatically center itself on the roller), fully vulcanized for maximum service life and optimal smooth running, tool-free, and therefore fast and uncomplicated, belt change, stepless height adjustment for optimal setup of the belt grinder for the user, freely adjustable metal fence for optimal and safe guidance of workpieces when using the large flat grinding area, belt speed is optimally engineered to largely eliminate the risk of burning workpieces during processing, motor protection switch with CEE collar plug device including phase inverter, 5-year warranty on the motor Belt length: 2000 mm Belt width: 75 mm Flat grinding area: 600 mm Belt speed: 30 m/s Color: RAL 9007 Motor – three phase 400 V: 3.0/3.75 kW Machine dimensions (W x D x H): 1100 x 550 x 1035 mm Weight: 105 kg Gjdpfxop R N N Ij Abmeuk DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE COMPLETE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, CNC Vertical Keyway Milling Machine Gusdpfjuc T S Usx Abmsk Year of manufacture: 1989 Working area: X-axis 1300 mm / Y-axis 150 mm / Z-axis 200 mm Tool holder: SK40 Spindle speed: 350 rpm – 4000 rpm Max. keyway length: 1200 mm Max. keyway width: 40 mm Clamping area: 1300 mm x 300 mm Weight: approx. 3500 kg Coolant system Dimensions: 1600 mm x 1500 mm x 1800 mm (LxWxH) Hydraulic unit Partially overhauled, milling spindle new Commissioning within approx. 200 km included in the price

Sąlyga: naujas, Gamybos metai: 2025, Standard Equipment Main switch Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically angled front LED lighting Quick-adjustable and ergonomic drilling depth stop Continuously variable speed control via central rotary knob Emergency stop mushroom button Thermal overload protection Spindle stop Drill guard with electric interlock Connection cable with CEE plug 3-year warranty for single-shift operation Technical Data Continuous/normal drilling capacity (mm): 23/25 (in E335/ST60) Thread cutting capacity (depends on pitch): M16x1 Spindle: MT III Drilling depth (mm): 115 Throat depth (mm): 260 Column diameter (mm): 110 Usable work surface (W x L) (mm): 420 x 340 T-slot size (arm), spacing (mm), width (mm), quantity: 2, 125, 13/26 Speed display: digital Drill depth display: digital Depth stop: quick-adjustable stop ring Feed (mm/rev): manual Table height adjustment: rack-and-pinion Three-phase motor 400V with frequency inverter (kW): 1.5 Spindle speeds stepless (rpm): 20 – 2000 Spindle/working surface (mm): Table: 230–590, Base: 230–670 Machine dimensions without packaging (mm): 430 x 715 x 1250 Weight (kg): 250 Optional Accessories Drilling package 3, consisting of: - Machine vice [felix] 2.0 100 mm - Quick-action drill chuck 3–16 mm (accuracy 0.17 mm) - Morse taper arbor MT 2 B18 and reducing sleeve MT 2 to MT 1 €470.00 Machine base cabinet: €815.00 Factory warranty: 3 years Godpfsulvd Hsx Abmeuk DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! REQUEST A QUOTE!

Sąlyga: geras (naudotas), Gamybos metai: 1990, 6 spindles Thread cutting device Spindle stop Gjdpfxevc Ddao Abmouk 1x long-turning attachment 1x tool for back side machining Accessories: collets