Medienos šlifavimo staklės pirkti naudotą (18)

Sąlyga: naujas, Gamybos metai: 2025, Kündig Edge Sander Uniq-S Edition 30 Top Condition - Immediately Available - - Complete sanding unit can be motorized tilted up to 45 degrees without any table adjustment - Integrated feed system in the machine base: 50 mm wide conveyor belt below, pressure rollers (diameter 60 mm) above, 0.55 kW motor, infinitely variable speed from 3 to 15 m/min - Double-sided operation with straight and contact sanding sides - Sanding belt dimensions: 200 x 2000 mm - Belt drive motor: 3 kW, 380 V, 50 Hz - Programmable oscillation stroke: 10 - 90 mm - CE compliant / dust tested Standard configuration Kündig Uniq-S Gedpfx Abovk R Aromeuk Accessories: - Q4 auxiliary table for belt drive roller - Q6 semicircular table for belt drive roller - Z04 table extension Location: ex stock 54634 Bitburg - Immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Langzauner Edge Sanding Machine EK 3/4 in Excellent Condition Accessories: includes several sanding belts Veneer fence jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Veneer sanding Round sanding support Oscillation Height adjustment: table, manual Tilting sanding belt: Yes Conformity marking: CE mark Total connected load: 4.6 kW Required space: Length: 1.7 m Width: 0.85 m Height: 0.9 m Gedsvr Hw Ijpfx Abmeuk Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, for machining smaller parts, especially solid wood Simple and safe operation Combination sanding unit with sanding pad for calibrating solid wood Control panel on the front side Standard with ribbed steel roller diameter 120 mm and hard sanding pad with graphite lining on a replaceable insert Motorised height adjustment of the worktable Electronically controlled sanding belt oscillation Manual star/delta motor startup Mechanical measurement of table position Ammeter for indicating the current draw of the sanding unit Two feed belt speeds Electromagnetic brake Combination unit for calibration and sanding Ribbed steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite overlay Universal design for calibration and sanding work on solid wood Model: BBS 630 C Article number: 5343065 Technical Data Working width: 630 mm Diameter of working roller: 120 mm Sanding belt width: 650 mm Sanding belt length: 1600 mm Sanding belt speed: 18 m/s Min./max. workpiece height: 3/160 mm Feed speed: 4.5 / 9 m/min Motor power: 5 kW / 400 V Feed motor: 0.43 kW Height adjustment motor: 0.18 kW Compressed air consumption: 20 l/min Operating pressure: 5.5 bar Operating pressure for belt blower: 8 bar Extraction pipe diameter: 150 mm Gujdpfxscnw U Ro Abmsk Extraction capacity: 3,000 m³/h Dimensions (mm): 600 x 1010 x 1500 mm Weight: 770 kg Location: Arriving in stock at 54634 Bitburg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, The robust Junior R1 offers all the features required of a modern edge sanding machine. A solid cast iron sanding unit with a powerful motor ensures maximum sanding performance. The height-adjustable worktable, spring-loaded for easy adjustment, allows for optimal belt utilization and safe operation. Optional equipment includes belt oscillation, infinitely variable unit tilting, veneer sanding attachment, and an additional table for sanding work at the deflection roller. The machine is supplied with a set of sanding belts; also included are an angle and mitre guide. Technical specifications: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Belt speed: 22 m/sec. • Table size: 750 × 350 mm • Required space: 1000 × 800 mm • Weight: from 180 kg • Extraction port Ø: 100 mm Gedped R Ev Djfx Abmeuk Location: Ex stock 54634 Bitburg - free loaded - Can be shipped for an additional fee.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Compact wide belt sanding machine with combination sanding unit With special action equipment - Top condition - Special Action Equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning via push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine height adjustment of the working table Clear control panel on the front Gjdpfx Ajxac E Hjbmjuk Robust, tube-reinforced monoblock steel machine body, robot-welded, work units mounted high up for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Conveyor belt feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers in front of and behind each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding shoe with graphite backing Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical Data Length (product) approx. 1388mm Height (product) approx. 1668mm Width/depth (product) approx. 1545mm Extraction connection Extraction nozzle diameter 140mm Electrical data Supply voltage 400V, AC Phase(s) 3Ph Supply frequency 50Hz Feed motor power 0.33 / 0.55kW Height adjustment motor power 0.25kW Drive motor power 7.5kW Sanding unit Sanding belt length 1525mm Sanding width max. 950mm Sanding belt width 970mm Feed unit Feed speed 4.5 / 9m/min Workpiece Workpiece height min. 4mm Workpiece height max. 170mm Location: ex stock 54634 Bitburg - immediately available -

Gamybos metai: 1988, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 01910/88, Floor sanding machine Eugen Laegler Model: Vibrafor Motor power: 1.1 kW Voltage: 220 V Vibrating sanding surface Gedecb Au Sjpfx Abmouk Dust bag included Location: 54634 Bitburg - available for inspection

Sąlyga: naujas, Gamybos metai: 2024, The Uniq series is the fully-fledged foundation of our range and shares all the features that have established the Kündig edge sanding machine’s reputation in the market as a robust, versatile precision instrument. A key element of its extremely solid construction is the motorized oscillating sanding unit, which offers a maximum oscillation travel of 90 mm and the ability to tilt motor-driven up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Gusdpfsfig Rwsx Abmek Ingenious Design – The Sanding Unit The core of all our edge sanders is the sanding aggregate, which offers a range of intelligent functions and features. Unlike many machines, our sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. Oscillation stroke and range are set easily at the touch of a button. Thanks to flexible adjustment and the large oscillation travel, sanding belts can be fully utilized across their entire width—without laboriously adjusting the table height. The oscillation mechanism is powered by a separate motor. The sanding aggregate can also be tilted easily using a rotary switch, also motor-driven. The unit can be inclined between 90° and 45°. Thanks to the well-designed swivel mechanism, full oscillation is always available and double-sided sanding is possible—even simultaneously. The differing table heights of the front and rear sanding stations also ensure that the belt is not used at the same height simultaneously. Furthermore, the combination of swivel mechanism and differing table heights ensures that the gap between sanding aggregate and worktable is minimized at every angle setting. Belt change is simple and accomplished in seconds. The Four Sanding Stations 1st Station: "Veneer Side" The front station is designed for precise calibration of materials and operates like a jointer-planer. The infeed fence is adjusted by a rotary knob to set material removal to tenths of a millimeter. Importantly, the fence remains parallel; it does not tilt. Infeed fence, sanding pad, and outfeed fence are always parallel, eliminating the possibility of rounding workpieces. Fine adjustment of the sanding pad for grit compensation or zeroing between fence and pad is possible via handwheel. The heavy-duty worktable on this side is fitted with sliding inserts. 2nd Station: "Solid Wood Side" This station is ideal for sanding flat, angled, beveled, or outwardly curved workpieces. As with the other stations, the entire sanding aggregate oscillates. The belt runs over a graphite surface for cooling across the full width. A mitre fence is also provided on the solid wood side. Included Accessories: - Half-round table - Auxiliary table with sanding rollers Location: In stock at 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Heavy-duty machine base ensures high torsional rigidity and vibration-free operation Improved grinding results thanks to sanding belt oscillation powered by a separate geared motor Oscillation can be switched on or off as required Standard veneer edge sanding unit with fine adjustment Godpfx Abeff Ed Tjmjuk Grooved infeed fence for sanding excess veneer edges Quick changeover from veneer to solid wood sanding Height-adjustable sanding table for use of the entire sanding belt width Height adjustment of the sanding table and sanding unit tilt via handwheels Height-adjustable auxiliary table with extraction for sanding radii Optimal chip removal via extraction at the unit and the cross table Automatic compensation of belt length differences with spring-loaded belt tension Dimensions and Weight Length approx. 1900 mm Width/depth approx. 810 mm Height approx. 1230 mm Weight approx. 290 kg Dust Extraction Connection Extraction port diameter: 120 mm Drive Power Oscillation motor: 0.25 kW Work Table(s) Worktable length: 960 mm Worktable width: 352 mm Worktable height adjustment: 210 mm Cross table minimum height: 730 mm Electrical Data Absorbed power: 3 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 3000 mm Sanding belt width: 150 mm Belt speed: 20 m/s Sanding area length: 1050 mm Sanding area width: 220 mm Swivel range: 0 – 45° Oscillation stroke: 20 mm Availability: Short-term

Sąlyga: naujas, Gamybos metai: 2025, Robust construction allows processing of longer workpieces. Swiveling sanding unit, can also be used as an edge sanding machine. 225 mm large, balanced belt rollers ensure vibration-free drive. Easy sanding belt adjustment. High belt speed of 17 m/s. Reversible drive direction (left/right). Upper sanding shoe with graphite coating. Sanding shoe with 4-point suspension. Includes movable sanding shoe for bevelled surfaces. Smooth-running sanding table, even under heavy load from large workpieces. Excellent price-performance ratio. Additional ESE Equipment Standard with electric table height adjustment. Split table folds up for special edge sanding applications. Drawer-type sanding attachment. Integrated worktable lighting. Equipment Details 225 mm large, balanced belt rollers ensure optimal, vibration-free drive. Belt speed: 17 m/s. With swiveling professional sanding shoe for bevelled surfaces, 4-point suspension. Standard with electric table height adjustment. Ergonomically positioned controls on a separate control panel. Standard with drawer-type sanding attachment. Split table folds up for specialized edge sanding applications. Dimensions and Weight Length approx. 3750 mm Width/depth approx. 1250 mm Height approx. 1730 mm Weight approx. 520 kg Dust Extraction Connection Extraction port diameter: 160 / 160 mm Worktable(s) Table height adjustment: 550 mm Table traverse: 690 mm Electrical Data Table height adjustment motor power: 0.37 kW Main drive motor power: 3.0 kW Connection voltage: 400 V Phases: 3 Ph Gujdoff Hdfspfx Abmsk Current type: AC Mains frequency: 50 Hz Sanding Unit Sanding belt length: 7000 mm Sanding belt width: 150 mm Belt running speed: 17 m/s Sanding shoe length: 270 mm Sanding shoe width: 150 mm

Sąlyga: naujas, Gamybos metai: 2025, Automatic Sander KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. Structuring Unit Robust 3-belt wide belt sander for the highest demands. Constant working height thanks to upper section adjustment. Working width: 1350 mm Pass-through height max.: 205 mm (up to 18.5 kW main drive motor) Abrasive belt size for "R" and "Ed-L": 1350 x 2000 mm Abrasive belt size for "Xi-L": 150 x 4700 mm "R" Unit - Contact roller: ➢ Grooved rubber contact roller, hardness 80 Sh ➢ Contact roller height infinitely adjustable via touchscreen ➢ Motorized raising/lowering of contact roller according to selected unit ➢ Increased sanding belt speed "Ed-L" Unit - Diagonal sanding pad: ➢ Electronic sanding pad with segment width 22 mm (pivoting special model), with variable edge pressure, automatic pressure regulation, and memory function for sanding pad segments ➢ Infinitely adjustable sanding belt speed (with PLC memory) ➢ Additional sanding pad insert "Xi-L" Unit - Cross sanding unit in the machine frame: ➢ Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure regulation, and memory for sanding pad segments ➢ Cross sanding belt supported by lamella belt ➢ Infinitely adjustable sanding belt speed (with PLC memory) Perfect-3 1350-REdXi-LL • Main Motors: ➢ 1st unit: 18.5 kW (25 HP) ➢ 2nd unit: 11 kW (15 HP) ➢ 3rd unit: 16 kW (MPM) (22 HP) 400 V/50 Hz • Workpiece Feed: ➢ Fabric-reinforced rubber feed belt ➢ Rubberized belt drive roller ➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz ➢ Speed: stepless 3 - 15 m/min • Vacuum System: ➢ On feed table ➢ Additional perforation of feed belt over 200 mm ➢ Vacuum generator: 2.2 kW (3 HP) / 400 V/50 Hz • Abrasive Belt Cleaning: ➢ Air knife for cleaning the sanding belt on both units "Ed-L" and "Xi-L", operation controlled, with suction channels and blower drive 1.1 kW (1.5 HP) 400 V/50 Hz Gujdpfor Hr Dzox Abmek • Pressure Elements: ➢ Infeed: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm ➢ Between units: rubberized pressure roller ⌀ 50 mm ➢ Outfeed: rubberized pressure roller ⌀ 50 mm 1. Grooved rubber contact roller, 80 sh. 2. Diagonal sanding pad with lacquer equipment and air knife for belt cleaning 3. Cross sanding unit with lacquer equipment and air knife for belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional Equipment: W61: Structuring unit at outfeed B 10: Structuring brush Abralon, Mink W71: Additional quick-change shaft for brush 1350 B 12: Brass-plated steel wire brush 1350 C 10: LED package A 20: 5x motorized control dampers (2x D=180 + 3x D=150) Working width: 1350 mm Max. pass-through: 205 mm Abrasive belt dimensions: 1350x2000 mm and 150x4700 mm 10" touchscreen with Industry 4.0 control Location: ex stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Holzkraft Edge Sander Model: KSO 200 F with Veneer Sanding Attachment Sanding unit tiltable up to 45° via lever The machine base, made of welded steel, ensures high torsional rigidity and vibration-free operation. Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on or off as needed Graphite-coated platen for longer sanding belt service life Height-adjustable sanding table for full utilization of the belt width Height-adjustable auxiliary table with extraction for sanding radii Spring-loaded belt tensioner automatically compensates for belt length differences Double extraction ports Extendable roller table extension Sanding drum with rubber coating Veneer edge sanding device with contact shoe featuring fine adjustment, support rollers, and stop rulers Grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding Dimensions and Weights Length approx. 1900 mm Width/Depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Dust Extraction Connection Extraction port diameter 140 / 100 mm Godpfx Abolht H Njmjuk Drive Power Oscillation motor 0.25 kW Work Table(s) Work table length 960 mm Work table width 350 mm Work table height adjustment 230 mm Min. table height 735 mm Max. table height 965 mm Long table height adjustment 230 mm Cross table length 330 mm Cross table width 330 mm Cross table min. height 720 mm Cross table max. height 900 mm Cross table height adjustment 180 mm Electrical Data Main drive motor power 3.0 kW Supply voltage 400 V Sanding Unit Sanding belt length 3000 mm Sanding belt width 200 mm Belt speed 20 m/s Sanding area length 1050 mm Sanding area width 200 mm Oscillation stroke 20 mm Location: In stock at 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Quick-release belt tension via lever Upper belt support with graphite coating 250 mm large, balanced belt rollers provide optimal drive. With electric height adjustment With dust extraction and noise protection systems With noise protection certificate With two speeds Adapts to surfaces using a swiveling sanding shoe Beveled surfaces Standard with right-hand and left-hand rotation The quick-release belt tension allows fast and effortless changing of sanding belts. Delivery is partially assembled Dimensions and weights: Length: approx. 4540 mm Width/depth: approx. 1510 mm Height: approx. 1510 mm Weight: approx. 475 kg Dust extraction connection: Extraction nozzle diameter: 2 x 140 mm Worktable(s): Worktable height adjustment: 620 mm Max. working width on table: 900 mm Electrical data: Height adjustment motor power: 0.37 kW Extraction motor power: 0.75 kW Drive motor power: 3.3 / 4.5 kW Connection voltage: 400 V Phases: 3 Ph Current type: AC Gjdpjff Hdbefx Abmeuk Mains frequency: 50 Hz Sanding unit: Sanding belt length: 8100 mm Sanding belt width: 150 mm Belt speed(s): 9 / 18 m/s Sanding shoe length: 360 mm Sanding shoe width: 150 mm Workpiece: Max. height: 590 mm Max. workpiece height longer than worktable: 180 mm Explanation regarding max. workpiece height longer than worktable: Machining of the workpiece with overhang to the right beyond the worktable is possible.

Sąlyga: naujas, Gamybos metai: 2025, Edge sanding machine with overlying feed unit What distinguishes the Uniq-S from the Uniq is its feed system, which is integrated into the machine table and features a rubberized feed belt and an overhead pressure beam. This design significantly facilitates the sanding and machining of slanted and beveled edges, as well as the serial sanding of workpieces. It also assists when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the overhead pressure beam gently convey the material. An optional second, lower conveyor belt is available. The upper pressure rollers can also be replaced with a rubber belt, which is particularly helpful when sanding extremely small parts. The Uniq-S is recommended as an all-round solution capable of performing all operations – from solid wood to fine veneer edges – with high quality. The infinitely variable feed speed ensures optimum adjustment to the material. 1. Sanding station: “Veneer side” 2. Sanding station: “Solid wood side” 3. Sanding station: “Auxiliary table” 4. Sanding station: “Half-round table” Gedohqb Rcepfx Abmsuk Location: In stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Holzkraft edge sanding machine: KSO 150 F PRO With oscillating sanding belt for optimum sanding results Article number: 5390020 Brand: Holzkraft Sanding unit can be swiveled using a hand crank The welded steel machine base ensures high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for superior sanding results Oscillation can be switched on or off as required Sanding pad with graphite coating for extended belt service life Height-adjustable sanding table allows the entire belt width to be utilized Auxiliary table with extraction ports for sanding radii on the rubber-coated deflection roller Sleeve sanding device with attachable worktable Spring-loaded belt tension automatically compensates for belt length differences Adjustable stops make it ideal for veneer sanding The grooved veneer stop allows for precise trimming of the veneer overhang TECHNICAL DATA Dimensions and Weight Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Guodpfxjv Sk Nns Abmok Extraction Connection Number of extraction ports: 2 Extraction port diameter: 100mm Work Table(s) Work table length: 950mm Work table width: 450mm Work table height adjustment: 110mm Electrical Data Supply voltage: 400V Mains frequency: 50Hz Power of oscillation motor: 0.11kW Sanding Unit Sanding belt length: 2640mm Sanding belt width: 150mm Belt speed: 14m/s Oscillation stroke: 15mm Sanding surface length: 800mm Sanding surface width: 150mm Swiveling range of sanding unit: 0 – 45° SCOPE OF DELIVERY 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm Service tools Mitre gauge

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1983, Johannsen ilginė juostinė šlifavimo staklė T 82 - K Pneuma - Oro pagalvės palaikomas šlifavimo padas - Maksimali ruošinio ilgis: 2800 mm - Stalo plotis: 950 mm Gedpjxpmtysfx Abmsuk - Pagrindinis variklis: 5,5 kW - Ventiliatoriaus variklis: 2,2 kW - Šlifavimo juostos plotis: 160 mm - Nusiurbimo jungties skersmuo: 180 mm - Sukimosi kryptis: dešinė/kairė - Reguliavimas rankiniu ratu - Bendri matmenys (Ilgis/Plotis/Aukštis): 4080x1800x1400 mm - Svoris apie 1000 kg Vieta: vietoje Saarlando žemėje - prieinama iš karto -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Compact wide belt sander with combination sanding unit Special action equipment: - On/off control of the sanding pad from the operator panel - On/off control of the roller from the operator panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with pushbutton Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel on the front Robust mono-block steel machine body with tubular reinforcement, robot-welded, aggregates mounted high for maximum rigidity Motor-driven height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail in front of the first aggregate Rubber pressure rollers, in front of and behind each sanding unit Gujdpjgf Sw Nsfx Abmjk Pneumatic belt tensioning for each unit with decimal adjustment for grit/belt thickness Universally usable for solid wood and veneer, thanks to the combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite insert Universal design for calibration and sanding of solid wood, particleboard, and veneer Technical data Product length approx.: 1388 mm Product height approx.: 1668 mm Product width/depth approx.: 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V Current type: AC Phase(s): 3Ph Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW Height adjustment motor power: 0.25 kW Drive motor power: 7.5kW Sanding unit Sanding belt length: 1525 mm Maximum sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Workpiece height min.: 4 mm Workpiece height max.: 170 mm

Sąlyga: geras (naudotas), Gamybos metai: 1997, Gamintojas: MABO Modelis: BABY S.A.S. BABY 80 Mašinos tipas: Briaunų šlifavimo staklės Godpjxgvcxefx Abmsuk Techniniai duomenys Volelių atstumas: 1.050 mm Didžiausias šlifavimo juostos plotis: 120 mm Greičio padėtys: 1 Pagrindinis variklis: 1,1 kW Šlifavimo juosta horizontali Šlifavimo juosta pasukama Vertikaliai į viršų Svoris apytiksliai: 95 kg Užimamas ilgis: 2,65 m Užimamas plotis: 0,55 m Užimamas aukštis: 1,1 m Vieta: sandėlyje 54634 Bitburg - galima iškart -

Sąlyga: naujas, Gamybos metai: 2025, CASADEI Libra 35 – Wide Belt Sander, Two-Belt Version Immediately available – Ex stock 54634 Bitburg Technical Data Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Abrasive belt width: 1115 mm Abrasive belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table adjustment motor power: 0.25 kW Main drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Photo shows optional equipment. Wide belt sander in two-belt version for widths up to 1100 mm, featuring a range of options suitable for cost-conscious workshops. Robust, tube-reinforced monoblock steel machine frame with high-mounted working units for maximum rigidity. User-friendly controls with clearly arranged front control panel. Motorized table height adjustment. Digital display for working height. Electronically regulated belt oscillation with reduced compressed air consumption. Automatic star-delta starting for the main motor. Natural rubber feed belt with negative profile. Feed table fitted with two rollers at the infeed and outfeed ends of the feed belt. Godpscr S Ecjfx Abmjuk Feed belt driven by gear motor, selectable between two speeds. Flexible steel pressure bar in front of the first unit. Rubber pressure rollers in front of and behind each working unit. Pneumatic belt tensioning per unit, with decimal correction for grit / belt thickness. Quality – Made in Europe. RTC Version 1st unit: diagonally grooved steel roller, Ø 120 mm, with fine adjustment for calibration. 2nd unit: combination unit with fine-adjustable working height for calibration and finish sanding, featuring a rubber-coated roller (Ø 120 mm, 45 Sh) and a hard sanding shoe with graphite lining on interchangeable insert. Scope of delivery: Table height adjustment with electronic height display Belt oscillation with electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-return feature (C.E.) Star-delta starting for the main motors Grooved calibration steel roller Selector switch for sanding shoe positioning from control panel Accessories: – Semi-hard flat sanding shoe – Automatic belt centering Location: Ex stock Bitburg – Special price