Agregatas

Cummins 6BT5.9-G2 - 110 kVA Generator - DPX-19835

Sąlyga: naudotas, Gamybos metai: 2000, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Turning length: 610 mm Cross travel (X-axis): 160 mm Longitudinal travel (Z-axis): 610 mm CNC control: Siemens 810D Spindle speed: 1 – 6300 rpm, stepless Spindle torque: 86 Nm Spindle bore: Ø 42 mm Spindle nose diameter at front bearing: Ø 80 mm Feed drive AC: X/Z: 5000 / 7000 N Rapid traverse X/Z: 16 / 20 m/min Tool turret – number of stations: 12 / VDI 30 Tailstock quill taper: MK4 Tailstock stroke: 500 mm (travel) Main spindle power: 7.5 kW (100% duty cycle = 11 kW) Electrical configuration – voltage/frequency: 3/PE ~ 400V and 50/60Hz Total power requirement: 20 kVA (11 kW) Machine weight approx.: 4.0 t Machine dimensions approx. LxWxH: 3.0 x 2.0 x 2.1 m The CNC lathe is equipped with a C-axis. Distance main spindle – tailstock: 805 mm Hydraulic power chuck Röhm Ø 160 mm (without jaws), speed 7,500 rpm. Tailstock with live center Ihedou Ixwispfx Af Iet Tool turret (12 positions available for driven tools) Currently, 8 tool holders are installed in the magazine, 4 of which are collet holders Coolant system, coolant supply through turret Control cabinet with cooling, Rittal Type SK3393100 Workpiece collection tray Machine lighting Accessories: 1x driven tool as per description.

Sąlyga: naudotas, Gamybos metai: 2013, valdiklių gamintojas: Siemens, valdiklio modelis: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector: Pneumatic Z-axis travel: 750 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Ihsdpow Tg Adsfx Af Ist Raw material feed: Short bar loader, EMCO LM 1200 Finished parts removal: Workpiece pick-off device (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, Absolent make Tool holders: Various fixed and driven holders Additional equipment: Spindle chiller unit

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 800 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 610 mm, sukimosi skersmuo virš skersinio stumduko: 500 mm, tekėjimo skersmuo: 725 mm, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 65 mm, X ašies eiga: 260 mm, Y ašies eiga: 80 mm, Z ašies eigos atstumas: 610 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, padavimo ilgis X ašis: 260 mm, padavimo eiga Y ašimi: 80 mm, padavimo ilgis Z ašis: 610 mm, sukimo momentas: 250 Nm, strypo praėjimas: 65 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE with ShopTurn control! CNC turning center for complete machining of turned/milled parts. Features: - Integrated spindle motors, counter spindle water-cooled (preloaded roller guides) with Y-axis, - On main/counter spindle - Latest control technology SINUMERIK ONE with ShopTurn conversational programming. Main spindle: • Max. bar capacity: 65 mm • Max. torque: 250 Nm • Speed range: 0-5000 rpm Counter spindle: • Drive power: 22 kW • Max. torque: 130 Nm • Speed range: 0-7000 rpm Tool turret: • 12-station tool turret VDI 30 radial with direction logic for up to 12 driven tool holders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: • Travel range: +/-40 mm • Hollow clamping cylinder incl. draw tube • C-axis for main/counter spindle • Sinumerik ONE / OPERATE control • 22" multi-touch display • SHOPTURN • 3D simulation • Rest material detection • USB interface • Control cabinet air conditioning unit • Coolant system incl. coolant pump (3.5 bar) • Chuck flushing (extra pump 3.5 bar) • Parts ejector and flushing through the counter spindle Isdpfx Asx E Dncsf Isht Hydraulic unit • Interface for chip conveyor • Documentation and CE certificate Control language: German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed COUNTER SPINDLE AS TAILSTOCK This cycle allows the counter spindle with mounted live center to be used for supporting workpieces. Thus, shaft parts can be supported and machined on machines without a tailstock by using the counter spindle. The maximum contact pressure is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE Interface for connecting robots. Implementation via HARTING connector. Signal exchange via Profinet. Safety signals 2-channel/potential-free. Digitization package for Sinumerik Condition monitoring SIEMENS ONE INTERFACE for connection to MDE/BDE systems Standard with the following information: • Machine on - AUX ON • Automatic operation • Production mode - program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D MACHINE DATA / MT65-G2 3D data model of the machine including: Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts can be transported to a catch box (standard) or via a conveyor belt (option). • Max. finished part length: 175 mm • Max. finished part diameter: 65 mm • Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000 For connecting the EMCO SL1200 short bar loader. etc.... Machine is available immediately!

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 685 kg, kuro tipas: dyzelinas, bakelio talpa: 155 l, spalva: smėlio spalvos, galia: 102 kW (138,68 AG), išėjimo srovė: 158 A, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 88 kW (119,65 AG), nominali (akivaizdi) galia: 110 kVA, nuolatinė galia: 80 kW (108,77 AG), nepertraukiama (akivaizdi) galia: 100 kVA, bendras ilgis: 2 390 mm, bendras plotis: 1 058 mm, bendras aukštis: 1 681 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: AKSA, aušinimo tipas: vanduo, PRP power: 80 kW / 100 kVA ESP power: 88 kW / 110 kVA Engine: AKSA A4CRX46TI Emission stage: 2 Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Cooling: water-cooled Generator: Aksa AK 480 Voltage: 400/231 V Voltage regulator: SX460 Control panel: DSE 6120 – automatic emergency power controller Battery charger: 5 amperes Type: Canopied unit; weatherproof, sound insulated • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (155 L) and vibration dampers • Coolant pre-heating • Voltage and frequency regulation according to ISO 8528-5 • Unit designed for stationary use only Iodpowy Ixzjfx Af Isht Please note that these units are not approved for mobile use according to current EU regulations. The units are sold as B-grade stock. B-grade means the units may show visual defects such as flash rust or rust on the housing. However, these issues do not affect the functionality or performance of the units in any way. By accepting this offer, you expressly acknowledge the stated characteristics and condition of the units.

Sąlyga: labai geros būklės (naudotas), - Apsisukimų greitis: 1500 aps./min - Galia: 80 kVA / 64 kW - Įtampa: 230-400V Isdpfxewyc T Hj Af Ioht - Tipas: dyzelinas

Sąlyga: naudotas, Gamybos metai: 2008, Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840 PL Ihedpfx Afov Rgzks Iot Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Travel - X axis: 270 mm Travel - Z axis: 750 mm Travel - X2 axis: 205 mm Travel - Z2 axis: 750 mm Travel - Y axis: 100 mm (+/- 50 mm) Main spindle speed: 0 - 5,000 rpm Counter spindle speed: 0 - 7,000 rpm Number of turret stations: 2 x 12 Tool holder: VDI 30 CNC turning and milling center | EMCO - HYPERTURN 665MCPlus with main and sub-spindle, C- + Y-axis, 2x turret, set up for driven tools and Irco Profimat bar feeder, also equipped with Knoll SF 1000/Turbo-1 coolant system. The machine has approx. 26,710 hours in production operation. Scope of delivery / Features: + 2 spindles: main and counter spindle with C-axis + 2 turrets for driven tools (12 stations each) + Upper turret equipped with Y-axis + Internal coolant supply + Chip conveyor + Irco Profimat bar feeder + Driven tools (straight and angled) + Power chucks for main and counter spindle + Extraction unit + Workpiece discharge device with conveyor belt + Knoll SF 1000/Turbo-1 coolant system + Various tool holders, approx. 80 pcs. VDI 30 + Boring bar holder + Jaw holder The machine is in a well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HYPERTURN665 | HYPERTURN-665 | EMCO-HYPERTURN

Gamybos metai: 2007, Sąlyga: labai geros būklės (naudotas), Renault Turbo 150 kVA Generator Set – French manufactured – Year of manufacture: 2007 Isdpfx Ajivt Insf Ieht – Enclosed canopy TECHNICAL SPECIFICATIONS: - Diesel - Engine type: MOT-482 - Alternator: Unelec - Engine power: 120 kW - Maximum generator output: 150 kVA - Water-cooled engine - Turbocharged - Transport dimensions (L/W/H): 310 / 150 / 245 cm - Weight: 2,000 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 540 mm, tekėjimo skersmuo: 660 mm, Skersmuo virš skersinio: 660mm Tekinimo ilgis: 1540mm Verpstės anga: 91mm Pagrindinės/pagalbinės verpstės greitis: 4000/5000aps./min. Įrankių sandėlys: 76 poz. Ihodpfsx A E U Nex Af Ijt Frezuojančios verpstės kūgis: Capto C6 Frezuojančios verpstės greitis: 12000aps./min. Verpstės varikliai: 26/22kW Maks. maitinimas: 200V/255A Pagaminimo metai: 2013/9 Ilgis: 5825mm Plotis: 2850mm Aukštis: 2750mm Svoris: 15860kg Pilna B ašis Aušinimas per frezuojančią verpstę 70Bar Knoll 110/700 Ruonių paėmėjas ir išvežimo konvejeris Automatinis presetatorius apatinei revolverinei galvai ir frezuojančiai verpstei Robotų sąsaja (be roboto), automatinės durys ir paruošta strypų padavėjui Antros verpstės kontrasmaigalio funkcija Renishaw OMP60 zondas MAPPS-IV CNC 5-ašių sinchroninis valdymas 5 papildomi M-kodai

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 685 kg, kuro tipas: dyzelinas, bakelio talpa: 155 l, spalva: geltonas, galia: 102 kW (138,68 AG), išėjimo srovė: 158 A, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 88 kW (119,65 AG), nominali (akivaizdi) galia: 110 kVA, nuolatinė galia: 80 kW (108,77 AG), nepertraukiama (akivaizdi) galia: 100 kVA, bendras ilgis: 2 390 mm, bendras plotis: 1 058 mm, bendras aukštis: 1 681 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: Cummins, aušinimo tipas: vanduo, PRP Power: 80 kW / 100 kVA ESP Power: 88 kW / 110 kVA Engine: AKSA A4CRX46TI Emission Stage: 2 Speed: 1,500 rpm electronic speed governor Operating voltage: 24 V Ihedpswy Iyrsfx Af Ist Cooling: water-cooled Generator: Aksa AK 480 Voltage: 400/231 V Voltage regulator: SX460 Control panel: DSE 6120 - automatic emergency power control Battery charger: 5 Ampere Type: Sound-insulated canopy unit; weatherproof, sound-attenuated • Emergency stop switch • Radiator with mechanical fan • Base frame construction with integrated fuel tank (155 L) and vibration dampers • Engine coolant pre-heating • Voltage and frequency regulation according to ISO 8528-5 • Unit suitable for stationary operation only

Sąlyga: naudotas, tuščias svoris: 5 100 kg, didžiausias leistinas svoris: 12 900 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 12/1998, krovimo vietos ilgis: 7 000 mm, krovinių skyriaus plotis: 2 470 mm, krovos erdvės aukštis: 1 mm, bendras ilgis: 2 550 mm, bendras plotis: 1 600 mm, pakaba: plienas, padangos dydis: 235/75R17.5, ratų bazė: 5 400 mm, spalva: oranžinė, rida: 1 001 km, pavaros tipas: kitas, vairuotojo kabina: kitas, Įranga: ABS,