CNC tekinimo staklės

CMZ TTL66

Sąlyga: geras (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Fanuc valdymas, 66 mm veleno pralaida, du revolveriai, dvi Y ašys, priešpriešinis velenas, detalių griebtuvas, trumpas padavėjas, aukšto slėgio siurbliai, įrankių laikikliai. Ppsdpfx Ahsycwwwe Hsl

Sąlyga: geras (naudotas), Gamybos metai: 2019, mašinos/transporto priemonės numeris: XD-38II-CP-0703-H, sukimosi skersmuo virš skersinio stumduko: 38 mm, veleno greitis (maks.): 6 500 aps./min, tekėjimo skersmuo: 38 mm, veleno skylė: 39 mm, galia: 7,5 kW (10,20 AG), The machine can be inspected at our premises in Immendingen by prior arrangement. Pedpfx Ahjvtmalj Hspl Included in the scope of delivery are the original chip conveyor, as well as a bar feeder from FMB type 3-36 turbo. Also included is a Büchele SFB-301 high-pressure unit, 150 bar, with 4 valves.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 Ppsdpfexmhdnex Ah Hsl The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Gamybos metai: 2021, Sąlyga: paruoštas naudoti (naudotas), Valdymo blokas Gamintojas: FANUC Pagrindinė pavara Ašių skaičius: 3 Pedpfex D Ei Aox Ah Hspl Ši 3 ašių CMZ TTL-66-66-TTY-T2Y staklė pagaminta 2021 metais, siūlo pažangias horizontaliojo tekinimo galimybes. Puikiai tinka sudėtingiems ir tiksliems metalo apdirbimo darbams, ši staklė užtikrina efektyvią gamybą dėl tvirtos konstrukcijos ir šiuolaikinių technologijų. Jei ieškote aukštos kokybės tekinimo sprendimų, apsvarstykite mūsų parduodamą CMZ TTL-66-66-TTY-T2Y staklę. Daugiau informacijos suteiksime susisiekus. Pritaikymo sritys: Tekinimas

Sąlyga: naudotas, Article: Clamping Heads Brand: Various Manufacturers Ppsdpfx Aon H Nzujh Hsl For Multi-Spindle Automatic Lathes, used or new Please contact us for further information and photos via e-mail (at) or

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Technical Data: Cone Rolling Machine Working width: 1050 mm Max. bending capacity for mild steel St40: 4.0 mm Diameter of conical top roll: 70 - 185 mm Diameter of side and central lower rolls: 105 mm Conical bending device Mobile control panel with digital display Hydraulic drop-end bearing Ppsdpfew An Uhex Ah Hel CE marking Motor power: 5.5 kW Dimensions (L x W x H): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tons Condition: Very little used, as new condition The seller does not assume liability for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any guarantee.

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 720 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC 640, sukimosi greitis (maks.): 15 000 aps./min, General Spindle: Direct drive Speed: 15,000 rpm Power: 34 kW Torque: 180 Nm Tool holder: SK 40 Ppodetpm Nijpfx Ah Hsl Tool changer: 90 positions Working area Travel X: 720 mm Travel Y: 600 mm Travel Z: 500 mm Rotary/swivel table: D = 700 mm Table load: 350 kg C-axis resolution: 0.001 degrees Other Rapid traverse X/Y/Z: 36 m/min Max. speed B-axis: 25 rpm Max. speed C-axis: 25 rpm Equipment Chip management: Chip conveyor Coolant supply: Through-spindle coolant 40 bar Workpiece measurement: Renishaw OMP 40 Tool measurement: BLUM laser bridge Software: Kinematic Optimiser

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, INDEX MS22-8 生产年份：2021（2022年投产） 双NCU 2个同步主轴 MBL 3.3米上料器 预计运行小时数：10,000 Pjdpjwt Unvjfx Ah Hjpl 如需完整的技术参数，请联系我们。

Sąlyga: naudotas, Gamybos metai: 2014, Technical Details: Maximum grinding diameter: 3-220 mm Regulating wheel width: 500 mm Maximum grinding wheel width: 500 mm Approx. machine weight: 16 t Space required (approx.): 12 x 10 x 8 m Grinding wheel diameter min./max.: 420-610 mm Grinding wheel diameter x width – bore: 304.8 x 500 mm Regulating wheel diameter min./max.: 300-350 mm The machine is currently configured for plunge grinding. Centerless grinding with automation and PPM Marposs; Güdel Grinding with JUPITER means centerless cylindrical grinding, optionally also with CBN. JUNKER combines this cylindrical grinding method with CBN grinding wheels, offering significant productivity advantages, especially for high volume production due to the long service life of the grinding wheel. In addition, simultaneous material removal across the entire length of the part ensures considerably reduced processing times, both in serial and small batch manufacturing. JUPITER Grinding Methods There are two grinding processes in centerless grinding: through-feed grinding and plunge grinding. Both methods are possible with the JUPITER series. Psdpfxst Uw Avs Ah Hjpl Areas of application for through-feed grinding: - Bolts and bearing bodies - Large rings - Small rings - Piston parts (e.g., for compressors) - Shafts with constant diameter - Piston rods (e.g., for shock absorbers) - Small pistons for hydraulics and injection systems - Precision wires and rods - Piston pins Areas of application for plunge grinding: - Rotor shafts - Transmission parts - Bearing seats for camshafts - Tubes for built camshafts - Universal joints - Needle parts for injection systems - Valve stems - Barrel rollers.

Sąlyga: naudotas, Gamybos metai: 2013, Technical details: Psdpfx Ahotv Sdfe Hopl Turning diameter: 38 mm Item: CNC lathe Manufacturer: Hanwha Model: STL38H Year of manufacture: 2013 Control: Siemens 840SL for 8 axes Main spindle: Max. turning diameter: 38 mm; spindle bore max. 42 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increment; Z1 travel 320 mm; synchronized guide bushing unit; guide bushing type JBS or SL38; collet type 173E / F48 Sub spindle: Max. pickup diameter: 38 mm; max. speed: 6,500 rpm Max. power: 23 kW; C-axis with 0.001° increment; Z2 travel 320 mm; collet type 171E / F42 Tool turret: Max. speed: 6,000 rpm Max. power: 2.6 kW; Servo axes: X2, Y2, Z2; Stroke [mm]: X2 = 115, Y2 = 100, Z2 = 120 Bar feeder: FMB Turbo 5-55 High-pressure unit: SFB-301 eco 150 bar Please contact us for further information and pictures via email (at) or