5 ašių apdirbimo centras / 1600 valandų

Chiron FZ 12 KS high speed plus

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Gjdpfx Aowuddvsbdsil Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Sąlyga: naudotas, Technical Details: x-travel: 6500/13150 mm y-travel: 4000 mm z-travel: 1250 mm w-axis: 2250 mm Table surface: 5500/12150 x 3000 mm Maximum workpiece weight: 70,000/105,000 kg Ram dimensions: 480 x 510 mm Milling spindle motor: 63 kW Spindle torque: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Milling spindle speed range: 6.3 - 4000 rpm Feed rate: 1 - 24,000 mm/min w-axis: 1 - 6000 mm/min Distance between columns: 3500 mm Clearance height: 3000 mm Total power requirement: 120 kW Machine weight approx.: 245 t Required floor space approx.: 29.0 x 7.7 x 8.1 m The machine is in an almost as-new condition and was fully modernized in 2020! with CNC SIEMENS 840 D automatic tool magazine for 153 tools automatic milling head magazine for 6 milling heads Gsdpfx Ajwc A Shjbdjil Machining module - straight - extra-long - Machining module - standard angle - 4000 rpm, 144 x 2.5°, ISO 50 Machining module - slim, extended angle - 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 Machining module - universal index - 40 kW, 4000 rpm, 2100 Nm, C-axis 144 x 2.5°, B-axis +/- 44 x 2.5°, ISO 50 Coolant system, chip conveyor

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Y travel: 700 mm Z travel: 610 mm Godpfovz Tyuox Abdsil Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 tools Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Handwheel

Sąlyga: naudotas, TECHNICAL DATA Gedpfxoup Hw Eo Abdoil - Number of axes: 5 MILLING SPINDLE - Tool holder: HSK63 - Spindle drive power: 17.5 kW - Spindle speed: 18,000 rpm LINEAR AXES - Travel path X/Y/Z axes: 915 / 500 / 500 mm - Rapid traverse (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of tools in magazine: 28 TABLE - Table size: Ø 630 mm - Max. table load: 500 kg ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive capacity: 26 kVA WEIGHT AND DIMENSIONS - Required space: 3620 x 3160 mm - Machine height: 3000 mm - Machine weight: 7300 kg MACHINE HOURS - Operating hours: 48,894 hrs. ACCESSORIES - Control: Heidenhain iTNC 530 - Coolant tank - Chip conveyor - Oil mist extractor: ELBARON - Coolant unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe system: Renishaw - Tool breakage monitoring: BLUM

Sąlyga: naudotas, New diesel generator set, generator, emergency power unit RTE Model 50kVA – identical to DAEWOO DAGFS 50 New, unused, year of manufacture 2025 Rated power 50 kVA Continuous power max. 40 kVA Standby power 55 kVA / 44 kW Rated current 33 amps Voltage 400/230 volts, 50 Hz / 230 volts, 50 Hz Fuel consumption 99-liter tank capacity for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load approx. 11 liters/hour Fuel consumption in standby approx. 4 liters/hour Drive engine 4-cylinder in-line diesel engine RICARDO ZH4105ZD Engine output at 1500 rpm: 45 kW Engine output at 1800 rpm: 55 kW Displacement 1500 cc Tank capacity 99 liters - Simple and compact design with sound-insulated metal enclosure - Forklift pockets for easy and safe transport by forklift - 3x CEE 16 amp sockets (3-pin, 230 V) - 1x CEE 16 amp socket (5-pin, 400 V) Godexlkq Uspfx Abdjil - Terminal strip for cable connection for external consumers, e.g., construction site power distributors - ATS module for mains backup operation, for automatic emergency power switching in the event of a power failure Space requirements L x W x H: 2150 x 950 x 1200 mm Weight: 900 kg Unopened stock machine

Sąlyga: geras (naudotas), Gamybos metai: 2008, 1 naudotas vertikalus apdirbimo centras Gamintojas: Deckel Maho Modelis: DMU 80 monoblock Pagaminimo metai: 2008 Valdiklis: ITNC 530 Techninės detalės X eiga: 980 mm Y eiga: 630 mm Z eiga: 630 mm Gisdpfx Abjxa Eudodjl Valdiklis: iTNC 530 Bendras galios poreikis: 10 / 15 kW Staklių svoris apie: 9,5 t Užimamas plotas apie: 4*4*2,5 m Papildoma informacija Komplektacija: Elektroninis rankenėlė Veikimo režimas 4 Rankinis pasukamas frezavimo galva Variklio velenas 12.000 aps./min SK 40 / prispaudimas DIN 69872 32 padėčių įrankių magazinas Stacionarus stalas 1250 x 700 mm Drožlių transporteris Aušinimo sistema

Sąlyga: naudotas, Gamybos metai: 2005, x-axis travel: 1,000 mm y-axis travel: 1,000 mm z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range: 20 - 18,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 121 Nm Tool interface: HSK-A63 Tiltable B-axis: -30° / +180° Swivel time: 1.2 s Godpfjwf Rgfjx Abdoil Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotatable C-axis: 360° Number of tool stations: 180 positions Tool interface: HSK-A63 Total power requirement: 78 kVA Machine weight: approx. 27.0 t Space requirement: approx. 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO - DMC 100 U duoBLOCK - Swivel milling head (B-axis) - NC rotary table (C-axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction unit - WITHOUT tools

Sąlyga: geras (naudotas), Gamybos metai: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travels: X-axis: 160 mm Z-axis: 450 mm Feeds: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Connected load Machine weight approx.: 3.7 t Space requirement approx.: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Giedjv Drigopfx Abdsl Chip conveyor Oil and emulsion mist separator with electrostatic filter

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2017, veikimo valandos: 132 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20731, X ašies eiga: 500 mm, Y ašies eiga: 350 mm, Z ašies eigos atstumas: 300 mm, greitas poslinkis X ašimi: 90 m/min, greitas poslinkis Y ašis: 90 m/min, greitasis eiga Z ašyje: 90 m/min, nominali (akivaizdi) galia: 35 kVA, valdiklių gamintojas: Fanuc 31I, veleno greitis (maks.): 42 000 aps./min, veleno veikimo valandos: 132 h, aušinimo skysčio tiekimas: 20 juosta, ašies variklio galia: 15 W, veleno nosis: HSK E40, įėjimo įtampa: 415 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Die Maschine befindet sich in einwandfreiem Zustand. Die Bearbeitungsgenauigkeit beträgt +/-0,0015 mm (gemessen mit Zeiss Micura). Die Maschine ist mit einem Renishaw OMP400 sowie einem BLUM Pico zur Werkstück- und Werkzeugvermessung ausgestattet. Die Wiederholgenauigkeit liegt bei +/-0,001 mm. Hochgeschwindigkeits- und Hochgenauigkeitsoptionen auf Fanuc vorhanden. Die Maschine kann unter Strom besichtigt werden. Godpfx Asvcfi Dobdjil

Gamybos metai: 2002, Sąlyga: labai geros būklės (naudotas),