Žirklinis pakėlimo stalas BUTER 200x100 5t

buter H 50-08

Būklė: naujas, Load capacity in kg: 1000 kg Reach: 4000 mm Height: 3000 mm (lower edge of jib) Total column height: 3790 mm Slewing range: 270 degrees Total weight: approx. 525 kg Description: - Festoon cable power supply for the trolley - Drag cable with approx. 800 mm cable sag - Ground-controlled operation via pendant control Includes: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-fall - Painted in RAL 5017 traffic blue - Load capacity 1 t Laedjxak Hxjpfx Alrod - Hook path 3000 mm - Maximum hook position 2442 mm - Design basis FEM 9.901 - Mechanism group 2m / M5 - Hoisting, 2-speed (pole-reversible), 1.3 / 5 m/min - Lifting power 0.22 / 0.9 kW - Duty cycle 60% ED - Switching cycles 360 cycles/hour Overload protection The crane system complies with the requirements of the Machinery Directive 2006/42/EC as well as the currently applicable accident prevention regulations DGUV Regulation 52 (formerly BGV D6). Including: - Anchor rods L200 (set) size LS 200 - Consisting of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - For foundation attachment, including accessories for grouting To align the slewing crane, an installation gap must be provided between the column base and the building floor. This installation gap must be grouted by the customer after approx. 4 weeks of crane operation. Image shows a similar crane system.

Būklė: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Lajdpfx Alev Si Szjrjd Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 18,5 kW (25,15 AG), pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, kuro bako talpa: 50 l, spalva: raudona, bendras svoris: 2 600 kg, tuščias svoris: 2 500 kg, kėlimo galia: 1 000 kg/m, kėlimo aukštis: 3 310 mm, padang padangų: 100 procentas, ašių konfigūracija: 2 ašys, sėdimų vietų skaičius: 1, kaušo tūris: 0,4 m³, kasimo kibiro plotis: 160 mm, Gamybos metai: 2025, keliamoji galia: 980 kg, Įranga: diferencialo užraktas, galvos apsauga, hidraulika, kabina, padėklų šakės, papildomi žibintai, priekabos jungtis, reguliuojamas strėlė, standartinis kaušas, visų varančiųjų ratų pavara, The H&R 2210-T telescopic loader, equipped with the new 3-cylinder Perkins turbo engine with 18.5 kW (manufactured in Mannheim, Germany), complies with the Euro 5 emission standard even without a soot filter. The new turbo engine is particularly efficient, and with the 2-speed hydrostatic drive, it reaches up to approx. 16 km/h. Thanks to the generous steering angle of 42° and a small turning radius, it can be easily operated in confined spaces. The 2210T wheel loader with telescopic boom comes standard with a quick-change pallet fork and a standard bucket, allowing you to start work immediately. An additional hydraulic circuit enables the use of various attachments for yard work. The telescopic arm provides the 2210-T with excellent outreach. The E-mode function on the joystick ensures particularly comfortable operation of the H&R 2210T. H&R loaders are technically and visually optimized in-house and undergo thorough inspections. In addition, every machine receives comprehensive rust protection treatment. Our loaders are CE compliant according to the EU Machinery Directive. Each machine receives a TÜV Süd certificate for obtaining individual operation approval according to §21 StVZO (road registration / operating license as self-propelled working machine). Advantages of the H&R 2210T Telescopic Loader: • Fully equipped • Efficient German-made engine (Euro 5) • Extensively optimized in-house • Extendable telescopic arm • Heated comfort cab • Includes pallet forks Lasdpfjul Af Dsx Alrsd • Includes 150 cm standard bucket • Joystick with float position and E-mode • Auxiliary hydraulics for front attachments • Hydraulic oil cooler • Brake inching pedal • Reversing camera with display • Rotating beacon • LED work lights front and rear • Wide tires 31 x 15.5 -15 • Radio with MP3 and USB • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch • 1-year spare parts warranty • CE compliant according to EU Machinery Directive Price: Net: 24,975.00 € VAT: 4,745.25 € Gross: 29,720.25 € Financing available! Optional: 2-year warranty: €590 TÜV road approval / operating permit for working machinery: €595 Transport within Germany & Austria upon request Technical Data: Engine: 3-cylinder Perkins turbo Power: 25 HP Emission class: Euro 5 Lifting capacity: 980 kg Lifting height: 3,310 mm (lower edge of standard pallet fork) Dumping height: 2,796 mm (lower edge of standard bucket, fully tipped) Lift/Lower time: 4.0 / 3.5 seconds Wheelbase: 1.6 m Dimensions (L x W x H): 3,710 x 1,496 x 2,340 mm Weight: 2,430 kg Tires: 31 x 15.5 - 15 Accessories and spare parts are available from us. Please include your phone number with your inquiry!

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: MBHF-KBK1, DEMAG KBK Crane Ceiling Crane Runway, dimensions approx. 12m x 3.5m Other dimensions available on request! Laodpfjpiarnsx Alrsd Load capacity / lifting capacity: 125 KG - 0.125 t Technical data of the system: - Crane runway made from Demag KBK1 rails System is delivered complete: - KBK rails, rail connectors, traveling gears, end plates, cable trolley, power supply, supports/hangers, etc. Includes 1 bridge with 125 KG Demag DC-COM chain hoist Crane is dismantled and available immediately Very good used condition, see pictures Item location: 75053 Gondelsheim Dispatch by freight or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacity 125KG - 1600KG Please inquire about your crane runway with required load moment and dimensions.

Gamybos metai: 2016, būklė: naujas, 1 piece of completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815 All gearbox components have been renewed except for the housing! Laodpfegwlrdjx Alrsd Jaw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil filling: 170 kg Input speed: n1 = 1400 Output speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Overall height h2: 925 mm Base length: 1170 mm !! Gearbox does not have an oil cooler !!

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 5,7 kW (7,75 AG), pavaros tipas: hidrostatinis, spalva: žalia, bendras svoris: 1 995 kg, kėlimo galia: 2 820 kg/m, kėlimo aukštis: 8 700 mm, padangos dydis: Rubber tracks, padang padangų: 100 procentas, Gamybos metai: 2021, veikimo valandos: 2 h, Įranga: borto kompiuteris, hidraulika, papildomi žibintai, === TECHNICAL DATA === Year of manufacture: 2021 Operating hours: 2 h Max. lifting capacity: 2,820 kg Max. lifting height: 8.7 m Jib outreach: 8.205 m Drive: Fully electric (lithium-ion battery) Remote control: Yes (radio remote control) Jib: Included Attachments / Additional equipment: searcher hook, multi-position outriggers, programmable load moment limiter Track type: Rubber tracks Condition of tracks: Very good / as new Weight: 1,995 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with traceable history CE certificate and complete documentation available Immediately ready for operation and transport Comprehensive technical documentation available Full electric zero-emission mini crane Ljdpfx Aloyidbmjroad Lithium-ion battery with fast charging function Continuous operation possible during charging Compact and lightweight design Multi-position outriggers Radio remote control Eco working modes === CONDITION === Excellent condition (new) – fully inspected, serviced and tested by certified specialists. Viewing available on request. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery possible. Price on request (EXW / plus VAT). Reliable first-hand machines with complete service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE-certified, and ready for immediate use. Spare parts and technical support available on request. === DELIVERY === Crane loading available on request. Flexible shipping options depending on destination and logistical requirements. All transports are professionally organized by the Collé Rental & Sales logistics team.

Būklė: naujas, Gamybos metai: 2025, Genie GR20 Runabout vertical mast lift, new, used, and demo machines available Lsderh D R Aepfx Alrjad

Būklė: naudotas, No. 3176 WEINIG Hydromat 1000 Planer and Moulder Used, Year of manufacture: 2007 6 spindles: bottom – right – left – top – top – bottom Electronic feed: 6 – 60 m/min Working width: 80 – 150 mm Working height: 23 – 65 mm Finished lamella width: 4 – 15 mm Max. number of lamellas: 16 pcs Lamella length: 400 – 4000 mm 1st spindle, horizontal bottom Brake motor 11 kW, 6000 rpm Spindle diameter: 45 mm Tool diameter: 125 – 180 mm 2nd spindle, vertical right Brake motor 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, vertical left 7.5 kW, 6000 rpm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of the spindle, swivelling, pneumatically loaded roller 4th spindle, horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool diameter: 112 – 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 5th spindle, horizontal top as saw spindle Lajdpfx Alju Agh Ssrjd Brake motor 37 kW, 5000 rpm Diameter: 45 mm Reduced axial adjustment to 25 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm Split pressure shoe before top spindle, adjustable and swivelling, pneumatically operated 6th spindle, horizontal bottom as saw spindle Brake motor 30 kW, 5000 rpm Reduced axial adjustment to 25 mm Diameter: 45 mm Tool diameter: 112 – 250 mm Max. sawing depth: 35 mm Axial adjustment: 45 mm All moulder spindles equipped with high-performance bearings Electronic feed, 7.5 kW Feed rollers adjustable axially by 35 mm relative to the left spindle Reduced roller spacing opposite the right spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, serrated roller in the table, side pressure roller Automatic Waxilit pump / Lubrication pump Machine with 4-roller outfeed, extended universal joint shafts to 200 mm 2 driven, serrated rollers in the outfeed table 2 driven, serrated rollers in the machine table Pressure beam before and material removal after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electrically adjustable height for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex location near South Tyrol, without transport and installation Errors in description and price are excepted Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; applies: 'purchased as inspected' Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1981, WEINIG Hydromat H25R, S/N 2603-624, pagaminta 1981 m., su praeinama garso izoliacijos kabina KASCHWIG – beveik nauja, pagaminta 2017 m. • Trumpas įleidimo stalas su sunkiu 6 volelių įleidimu 1. apatinis velenas 11,0 kW 2. dešinysis velenas 11,0 kW 3. kairysis velenas 11,0 kW 4. viršutinis velenas 15,0 kW 5. apatinis velenas 11,0 kW 6. apatinis velenas 11,0 kW • Hidraulinė padavimo sistema 6-60 m/min. • Padavimo variklis 22,0 kW • 4 pavaromis varomi stalo volai • Veleno skersmuo 50 mm • Automatinis stalo tepimas Laodpfx Astkt Tpelrjd • 1, 4, 5 ir 6 velenai su atraminiais guoliais • 1 ir 4 velenai su tiesia griovimo funkcija • Padavimo volai 170 mm • 4 vnt. hidroobliavimo galvų 150 mm • 6 vnt. hidroobliavimo galvų 250 mm • Ištraukimo jungtis virš mašinos

Būklė: naudotas, Gamybos metai: 2020, mašinos/transporto priemonės numeris: 001646U en 001647U, For sale 2x used Demag single girder overhead cranes 13,325 mm span x 10,000 kg capacity. Lodsya Ag Sjpfx Alread These two cranes have operated together in a factory hall and are equipped with tandem operation controls. We can optionally deliver the cranes including: * Installation and inspection * Power supply rails * Radio remote control * Master-master controls Jan Reiling B.V. also supplies brand new, fully customised cranes at highly competitive prices, including: * Overhead cranes * Suspension cranes * Jib cranes * KBK rail cranes * Boat lifts All our new and used cranes supplied with installation come with a warranty! Additionally, we maintain our own stock of approximately 15,000 Demag spare parts. For more information, please visit the website of Jan Reiling B.V. Cranes, crane, overhead travelling crane, workshop crane, warehouse crane, hoist, hall cranes, bridge cranes, workshop cranes, storage cranes, lifting equipment, universal cranes, hoist. Overhead crane, laufkrane, overhead crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.