CNC tekinimo ir frezavimo centras

Bumotec S191 FTL-R

Axis travel Z = 400 mm Y = 200 mm X = 410 mm

Drive power / Thrust force
Z-Y: 2.5 kW / 550 daN
(linear motor option = 7.2 kW / 350 daN)
X: 4.8 kW / > 550 daN

Traverse speed X-Y-Z: 40 m/min
(linear motor option = 50 m/min)
Acceleration X-Y-Z-W: 8 m/s² / 0.8 g
(linear motor option = 10.4 m/s² / 1.1 g)
Resolution X-Y-Z-W: 0.0001 mm

MAIN SPINDLE + C1

Power: 7.5 kW
Torque / peak: 22 / 28 Nm
Measuring system: direct
Resolution: 0.0001°
Accuracy: 0.001°
Bar capacity: Ø 32 mm
Spindle rotational speed (turning): 72,000°/min
Clamping force (turning): 4,900 N at 6 bar

B AXIS (TOOL SPINDLE TILTING AXIS)
Power: 4.3 kW
Torque / peak: 119 / 226 Nm
Swivel range: -25° / +115°
Measuring system: direct
Resolution: 0.0001°
Accuracy: 0.001°
Rotational speed: 36,000°/min
Support torque: 200 Nm

TOOL SPINDLE
Power: 5 kW
Torque: 6 to 800 min⁻¹
Maximum speed: 30,000 min⁻¹
Collet clamping force: 2,000 N
Locking torque: mechanical locking by straight toothing
Tool interface: HSK 40 (A or E)
Tool clamping force: 1,000 daN

TOOL CHANGER
Number of stations: 30 (for HSK 40)
CNC control: Fanuc 30i/31i type

Y AXIS (cross axis)
Travel: 200 mm
Power: 4.8 kW
Feed power: 240 daN
Resolution: 0.0001 mm
Max. rapid traverse (G0): 50 m/min
Max. feed (G1): 20 m/min
Measuring system: glass scale

Z AXIS (longitudinal axis)
Travel: 400 mm
Power: 7.2 kW
Feed power: 360 daN
Resolution: 0.0001 mm
Max. rapid traverse (G0): 50 m/min
Max. feed (G1): 20 m/min
Measuring system: glass scale

Including cooling unit 8 kW and integration of an emergency stop system.

Inventory no. 2220114, machine comprises:

CONTROL
Fanuc 30i/31i with 14'' screen

LINEAR MOTOR FEED OPTION
for Y and Z axes

TURNING-MILLING FUNCTION
Nsdpfx Acsyf Angeajwi
With integration of indexing system (8 positions) on the tool spindle,
conversion of the tool magazine for HSK40-A tool holders,
increase of spindle speed to 5,500 min⁻¹

WORKPIECE PICK-UP UNIT "PRM" WITH 4 POSITIONS, FOR 6TH FACE MACHINING:
In idle status, the unit is located protected under main spindle C1.
The pick-up unit moves along the W axis, which is parallel to the C axis.
Max. speed W-axis: 40 m/min.
Travel along W-axis: 310 mm.
With
2 vices – clamping force at 5 bar: 3,500N
1 tailstock

SPINDLE BORE INCREASE
Enlargement from 1 to 50 mm (main spindle)

RENISHAW TOOL MEASUREMENT DEVICE T27
Measurement of turning tool length.
Routine detection via M-code.
Automatic tool breakage control.

TOOL MAGAZINE EXTENSION
Increase in tool capacity from 30 to 60 stations

THROUGH-SPINDLE COOLANT
100 bar, 25 L/min, 400L tank

PREPARATION AND SETUP FOR HP THROUGH MILLING SPINDLE
Mechanical and electrical integration for turning clutch.

WORKPIECE UNLOADING BELT
Discharge to the left of the machine

PAPER BELT FILTRATION SYSTEM

CLAMPING SYSTEM FOR F-48 COLLETS

ADAPTATION FOR W-20 COLLETS

PREPARATION FOR BAR FEEDER INTEGRATION

Unless otherwise stated or in case of error, technical specifications are given without obligation.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.