Flow forming staklė

BUD-MASZ D32 Finish

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), A Spinner simultaneous turning center with three turrets and a comprehensive range of accessories, spare parts, and tooling is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: speed: 5000rpm, spindle nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turrets 1/2/3: turret stations: 3x12, speed: 8000rpm, tool interface: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27,102h, control: Fanuc 31i. Includes Top Automazioni bar feeder, 80 bar coolant/high-pressure system, chip conveyor, fire extinguishing system, an extensive tooling package, and further spare parts. Documentation available. On-site inspection possible. Hfjdpfx Absua E Trs Sed

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 1 500 h, Funkcionalumas: visiškai funkcionalus, pjovimo jėga: 630 t, galia: 90 kW (122,37 AG), tuščias svoris: 36 500 kg, bendras plotis: 2 400 mm, bendras ilgis: 9 500 mm, bendras svoris: 40 000 kg, pjovimo ilgis (maks.): 1 600 mm, paskutinio kapitalinio remonto metai: 2024, įvesties srovės tipas: trifazis, darbinis slėgis: 220 juosta, Scrap Shear MS-6300e (scrap shear with electric motor) without operating fluids. Hjdpfsuu Upgox Ab Sjfd A 250kW diesel generator can be offered separately. Model: MS-6300e Shearing force: 630 t Cutting length: 1,600 mm Discharge height: 500 mm Power: 110 kW Capacity: 12–17 t/h Machine weight: 40 t (+diesel generator 4 t) Hopper size: 3,850 mm x 2,600 mm x 1,500 mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required Function: Scrap is loaded into the feed area with the help of an excavator. Due to the horizontal feed section and the weight of the scrap, it falls down into the loading chamber and into the cutting area. The scrap is compacted against the front wall and cut by the horizontally moving tool carrier through the blades on the end wall. As the tool carriage moves horizontally, the processed material is pushed out through the blades at the front of the chamber. When returning to the rear position, the loaded scrap shifts by its own weight into the interior of the shear. Scrap shears are available in various configurations to suit customer requirements, and the output size can be selected (for new orders). Inspection and test operation are possible.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Inca Onset X2, 3/4 automatisiert Farbkonfiguration: 8-Kanal-Drucker mit vier Farben (CMYK) Nur 1/12 des Neupreises!!!!! Druckkopfstatus erlaubt das Drucken mit maximaler Geschwindigkeit und herausragender Qualität – bis zu 140 Bögen pro Stunde/700 m² pro Stunde, es müssen 60 Köpfe ersetzt werden (ca. 45.000 €). Hfedpfx Asun Swbsb Sod Die Maschine befindet sich in ausgezeichnetem Zustand und wurde seit dem ersten Tag durch den Hersteller gewartet. Die jährliche Wartung wurde im Mai 2025 durchgeführt. Verfügbar: Januar 2026 Mit wachsendem Geschäftsvolumen bietet die Onset X2 die Möglichkeit, das Anwendungsportfolio zu erweitern. Durch ein zweites CMYK-Set wird die Produktivität weiter gesteigert – bis zu 707 m²/h* (entspricht 138 Bögen vollformatig pro Stunde). Optional können sechs Kanäle mit Light Cyan (Lc), Light Magenta (Lm), Weiß (W) und Orange (O) belegt werden, um maximale Flexibilität und erstklassige Druckqualität zu gewährleisten. Je nach Anforderung können uni-direktionale, bi-direktionale oder Super-High-Quality-Druckmodi gewählt werden. * Basierend auf einer ungefähren Materialhandhabungszeit von 6 Sekunden. Demontage, Transport, Installation, Schulung und Gewährleistung sind innerhalb Europas im Preis enthalten. Für weitere technische Details verweisen wir auf das beigefügte Datenblatt.

Būklė: naudotas, Gamybos metai: 2016, Technical details: Weight: 22 t Hfodpfx Aoudf Evsb Sjd

Gamybos metai: 1977, būklė: naudotas, Turning diameter: 700-1500 mm Clamping length: 3000 mm Track gauge: 1676 mm Control system: Approx. machine weight: 60 t Rafamet UBC 150 Wheelset Lathe for Railway Wheelsets Factory No.: 152 110 Year of manufacture: 1977 Hsdpfx Asuddgljb Sofd Machining range: Diameter from 700 mm to 1500 mm Track gauge for standard wheelsets: 1435 mm Available track gauges: 1435 mm, 1524 mm, 1676 mm Length of wheelsets to be machined: 1640-3000 mm Rolling diameter of the wheelset: 700-1500 mm Drive diameter: 350-1350 mm Wheel tire width of the wheelset: up to 140 mm Overall dimensions of the wheelset lathe: 8700 x 3600 x 3250 mm Total installed power: 172 kW Weight of the machine: 59,200 kg Adjustment speed Lifting and centering device: 2500 mm/min Headstocks: 1320 mm/min Quills: 550 mm/min Carriages in longitudinal direction: 1300 mm/min

Būklė: geras (naudotas), Gamybos metai: 2000, bendras aukštis: 47 000 mm, bendras plotis: 27 000 mm, bendras ilgis: 25 000 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 800 mm, bendras svoris: 43 000 kg, stūmoklio plokštės plotis: 600 mm, štampo pagalvėlės eiga: 200 mm, Control system Siemens Simatic OP 27 Hodpfx Astiwgijb Sjfd Light barrier by Sick Separate control cabinet by Rittal Side walkways/passages Floor-level installation

Būklė: geras (naudotas), Traypacker / wrap-around-verpakker Trays en wrap-around dozen minimale verpakkingsafmeting L x B x H = 190 x 140 x 80 mm maximale verpakkingsafmeting L x B x H = 460 x 350 x 250 mm Hfsdpfx Aofxypijb Sed 4-banen machine. Hotmelt-installatie geheel gereviseerd in 2018, Siemens S7 PLC-besturing, eenvoudig formaatwissel. In huidige staat of Aangepast aan klantwens.

Būklė: labai geros būklės (naudotas), Tacchi HD/1450 – 725 x 4000 mm CNC tekinimo staklės (2012 m.) Hfjdpfxjxc In So Ab Sed Serijos numeris: 7264 Metai: 2012 Valdymas: Fanuc OiTD CNC Būklė: Naudotos – geros darbinės būklės Techninės specifikacijos: Centro aukštis: 725 mm Sūkurio skersmuo virš lovos: 1450 mm Sūkurio skersmuo virš skersinio stalo: 1000 mm Atstumas tarp centrų: 4000 mm Pagrindinis variklis: 60 kW Didžiausias svoris tarp centrų (be atramos): 15 000 kg Veleno apsukų diapazonas: 1,9 – 560 aps./min. Ypatybės ir įranga: 2 x 3 taškų centravimo atramos Rankinis ratukas Drožlių transporterio sistema 4 pozicijų hidraulinė įrankių galvutė 4-griebtų spaustuvas Fanuc OiTD CNC valdymas

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam Hjdpfx Abefi Tg Ho Sefd No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: P 04-09-002, neu U05 10 001, Spray Automat Venjakob HGS-K All images for reference only. - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (expandable to 1000 mm) - Current condition: not refurbished - Offer price is for the refurbished condition - Operator side: right - Dual pistol drive system Hfedpjumvr Tsfx Ab Sed - Dry exhaust system: 4,000 m³/h - Exhaust connection diameter: 400 mm - Conveyor belt transport system - Feed rate continuously adjustable: 3 - 8 m/min - With paint recovery system - Gun control unit: LS 1 - Installed paint circuits: 1 - Airless spray system: 4 units of Krautzberger KAA 1300 - Number of paint pumps: 1 - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current consumption: 17 A, protection: 35 A - Location: in stock - Permissible voltage fluctuations: max. +/- 5% _____ Optionally, we can provide you with an offer for installation and commissioning of the system, as well as staff training. On request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!