Becentrinės - cilindrinės šlifavimo staklės

BRYANT 45 M / Serial No. B 16049

Būklė: naudotas, Gamybos metai: 1989, Used, well-maintained GEIBEL+HOTZ surface grinding machine, model FS 50 SA Grinding area: 500 x 250 x 375 mm, vertical automatic feed with electro-magnetic fine-pole chuck, grinding wheel diameter: 300 x 50 x 76.2 mm, with paper band filter system, manual dresser mounted on top. Various wheels and flanges included. Weight: approx. 2,400 kg Footprint approx. 2,500 x 1,800 x height 2,500 mm The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be inspected. Please contact us for further information. Guodpfx Aqowq Nc Nsljc

Būklė: geras (naudotas), Gamybos metai: 2016, veikimo valandos: 25 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: - 396.900.171.0076, X ašies eiga: 600 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 350 mm, bendras ilgis: 1 030 mm, Įrenginys yra puikios būklės ir gali būti apžiūrėtas įjungtas. Godpoyit Ulofx Aqleuc

Būklė: naudotas, rida: 19 950 km, pirmoji registracija: 11/1989, kuro tipas: dyzelinas, ašių konfigūracija: 4x4, pavaros tipas: mechaninis, Gamybos metai: 1989, Įranga: visų varančiųjų ratų pavara,

Būklė: naudotas, Gamybos metai: 1996, Technical details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm CNC control: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding. - With the plunge-cut method, the maximum plunge length is 160 mm. - Automatic workpiece discharge via rail (the function/operation of which is not known to WMW AG) Gjdpfeu Ngyzsx Aqleuc - Working grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, infeed angle right 0-6° and left 0-2°; wheel size 280x160 mm - Automatic grinding wheel balancing system Condition: Reference run not possible Machine does not operate in automatic mode Accessories: various grinding and regulating wheels available on request

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: Nuolatinė srovė, bendras plotis: 370 mm, bendras ilgis: 180 mm, bendras aukštis: 190 mm, įėjimo įtampa: 230 V, sukimosi greitis (maks.): 5 300 aps./min, bendras svoris: 10 kg, įėjimo dažnis: 50 Hz, garantijos trukmė: 12 mėnesiai, galia: 0,18 kW (0,24 AG), šlifavimo skersmuo: 13 mm, Grinding of drills with a diameter from 2 mm to 13 mm Adjustable angle ----- 90° and 135° Grinding speed ----- 5300 rpm Gujdpfx Aqsga T D Tsloc Grinding wheel ----- CBN 200 Motor ----- 230V / single-phase / 180W Weight ----- 10 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 1996, Grinding Length: 600 mm Grinding Width: 0 mm Total Power Requirement: 7.5 kW OFFER Subject to prior sale and errors excepted, we can offer you the following from stock, without obligation: GEIBEL & HOTZ CNC Horizontal Surface & Profile Grinding Machine Model: FS 6 - Z CNC Year of Manufacture: 1996 _____ Max. Grinding Length (Table Longitudinal Travel 660 mm): 600 mm Max. Grinding Width (Cross Travel max. 360 mm): 0 mm Max. Grinding Height under Wheel: approx. 375 mm Distance Table – Spindle Center Min / Max: 140 / 525 mm Standard Magnetic Chuck Size: 600 x 0 mm Table Clamping Surface: 820 x 0 mm Maximum Table Load: 400 kg Table Speed: m/min Cross Movement / Table Stroke: 3 - 40 mm Rapid Traverse Cross/Vertical Speed: 5 m/min Grinding Wheel Size: 300 x 50 x 76.2 mm Grinding Spindle Speeds, Adjustable: 1,000 – 3,000 rpm Grinding Spindle Drive: approx. 7.5 kW Total Drive: approx. 15 kW - 400 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special Equipment Gedpfjx Harysx Aqljuc • SIEMENS CNC Control, Type 840 D, with comprehensive GEIBEL & HOTZ grinding software: user-friendly, text and graphics supported, easy programming even for complex grinding wheel contours and fast linking of grinding operations. • All standard grinding programs and cycles such as flat and multi-face grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, etc. • Electronic handwheel for 3 axes. • Table drive via toothed belt, allowing both very high and very low table speeds, ideally suited for profile grinding. • Dressing device with flip diamond, mounted left on the table with automatic dressing cycle and compensation, also for profile dressing. • Fixed dresser with exchangeable holder left on the table. • Mounted sinus table permanent electromagnetic chuck approx. 600 x 200 mm, fine pole. • Wet grinding system with separate band filter coolant filtration unit. • Free-standing control cabinet, work lamp, various accessories, operating manuals. Condition: Good to very good condition! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice Always a large selection of grinding machines in stock – please inquire about your requirements!

Būklė: beveik kaip naujas (naudotas), BeCentrovali šlifuoklis ESTARTA 301 CNC Gjdpfx Aexfqzmjqljuc

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 700 mm, tekėjimo skersmuo: 230 mm, ašies variklio galia: 25 W, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 165 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 700 mm, veleno nosis: ASA 8, CNC FANUC TRAVELS X Axis: 165 mm Z Axis: 700 mm Y Axis: 100 mm X2 Axis: 165 mm Z2 Axis: 700 mm Y2 Axis: 100 mm CAPACITY Max swing diameter: 230 mm Max turning diameter: 230 mm Max turning length: 700 mm Max bar working diameter: 65 mm SPINDLE Spindle nose: ASA 8'' Spindle speed: 5,000 rpm Spindle bore: 80 mm Spindle motor power: 25 kW SUBSPINDLE Subspindle nose: ASA 8'' Subspindle speed: 5,000 rpm Subspindle bore: 80 mm Subspindle motor power: 25 kW UPPER TURRET Number of stations: 12 Power of driven tools: 7.5 kW LOWER TURRET Number of stations: 12 Power of driven tools: 7.5 kW Machine is equipped with: • Two high pressure pumps 35 bar with inverter • Linear scales • Two collet chucks as shown in the pictures • Basic kit of driven and static tool holders Gsdpfxey Apcas Aqlouc • Instruction manuals and CE declaration

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 150 mm, Y ašies eiga: 1 850 mm, Z ašies eigos atstumas: 1 000 mm, X ašies padavimo greitis: 30 m/min, Y ašies padavimo greitis: 30 m/min, padavimo greitis Z ašis: 24 m/min, veleno greitis (maks.): 24 000 aps./min, sukimo momentas: 87 Nm, CNC Fidia C20 WORKING RANGE Longitudinal X-axis travel: 3,150 mm Transversal Y-axis travel: 1,850 mm Vertical Z-axis travel: 1,000 mm MAXIMUM AXIS SPEEDS X, Y axis feed rate: 30 m/min Z axis feed rate: 24 m/min WORKPIECE TABLE Gujdpfsyw Tddox Aqlsc Clamping surface: 3,000 x 1,600 mm Maximum permissible load: 5,000 kg/m² T-slots: - 8 longitudinal H12 + 1 H8 - Width: 22 mm - Pitch: 160 mm ELECTROSPINDLE: Maximum power (S6 60%): 55 kW Spindle speed range: 240 to 24,000 rpm Constant power range: 6,000 to 24,000 rpm Maximum torque: 87.5 Nm Tool holder: HSK – A63 C-axis travel: ± 200° C-axis speed: 2,000°/min C-axis offset from spindle axis: 75 mm A-axis travel: +95° / -110° A-axis speed: 2,000°/min Max distance spindle nose – table surface: 1,175 mm Machine complete with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various accessories supplied with the machine • User and maintenance manual and CE compliance declaration

Būklė: geras (naudotas), Coordinate grinding machine Jig grinding machine Make: Henri Hauser SA. Model: 3.S.M.O. Serial No.: 76 No.: 218···600 2-axis digital readout FAGOR. Machine type: jig grinder Control type: conventional Guedpfsktkmvex Aqlsc X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding diameter: 220 mm Table surface: 600 x 320 mm Throat: 310 mm Angle range: 12° Vertical grinding carriage adjustment: 110 mm Lifting speeds: 0 – 6 m/min Grinding spindle speed: max. 50,000 rpm Peripheral speed: max. 35 m/s Maximum workpiece weight on table: 80 kg