Biopharma procesų įrenginys GMP plazma

Brinox

Būklė: geras (naudotas), 5 vnt. geros būklės, buvo sumontuoti CIP įrenginyje. Ppjdpeykk Edsfx Acaew

Veikimo valandos: 240 h, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MSB14, Machine completely disassembled and overhauled with new and original GEA-Westfalia spare parts. During the overhaul, among other things, the bevel gear set was replaced with new, original components and the frame was oven-painted. Hydraulic capacity: Up to 8,000/9,000 l/h Actual capacity: between 500/1,000 l/h, capacity determined through tests with your processed product; capacity may vary significantly depending on the percentage of solid residues present in the product to be processed. Technical specifications: - 7.5 kW electric motor – 380V/3ph – 50Hz - Bowl volume: 6.9 l; sludge chamber: 3.9 l Ppedpfexvrfnex Acasw - Bowl speed: 7,500 rpm The machine is sold complete with the following accessories: - Set of special wrenches for drum disassembly; - New control panel with 11 kW inverter for power supply and PLC-controlled discharge management section in stainless steel enclosure; The use of an inverter allows for smoother starts and significant reductions in power consumption and maintenance. - New operating water unit with 20 l stainless steel tank, complete with float and stainless steel pump, for consistently reliable water shots; - Flow indicator; - The machine is installed on a sturdy platform with four M20 anti-vibration feet, made from square profiles.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: BH6721-BH1001, bakelio talpa: 1 000 l, Įranga: dokumentacija / vadovas, BRINOX 1,000 L Pre-Filling Vessel – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag No.: BH6721-BH1001 Serial Number: 1003453 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling vessel / process vessel Nominal volume: 1,000 litres Total volume: 1,400 litres Empty weight: 762 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) CE marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – individual inspection Notified body: TÜV SÜD Industrie Service GmbH (identification no. 0036) TÜV approval including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel was fully FAT-tested and released at the factory. Tests performed include: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Verification of labelling • Complete documentation audit FAT protocols fully available. DESIGN • Cylindrical, horizontal vessel • Double jacket for heating/cooling • Internally electropolished and passivated • High-gloss polished product surface • Pharmaceutical-grade weld seams • DN 500 manhole • CIP connections • Safety valve • Manometer • Bottom diaphragm valve • Agitator connection (DN 200) • Multiple spare connections • Heavy-duty trunnion / journal bearings • Transport and lifting equipment DOCUMENTATION – comprehensive and well-structured Extensive project-related quality and manufacturing documentation available, including: • EU declaration of conformity and warranty certificates Ppedpfx Asykpqrscasw • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • 3.1 Material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (RT, PT etc.) • Analysis certificates for welding filler materials and shielding gas • Company qualification certificate • Surface roughness protocol • Surface treatment report • Dimensional accuracy inspection report • Internal pressure test report • Calibration certificates for manometers • Reports and EU conformity for installed components • Compilation with parts list • Component drawings • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never in productive use • Stock item • Internal surface absolutely as new • No corrosion • No signs of use • Factory-new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications FEATURES Premium BRINOX pharmaceutical-grade manufacturing with complete PED Module G individual inspection by TÜV SÜD, CE 0036 marking, and fully documented FAT testing. Not a standard tank – but project-quality, fully certified to GMP standards with comprehensive documentation. Available immediately.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Machine Description BRINOX LEP 12 – CIP System Precipitation PRE LEP 12 CS6725 Package 5 Manufacturer BRINOX Prozess- und Edelstahltechnik GmbH, Offenburg Year of Manufacture 2020 Serial Number 1003614 Technical Data Compact CIP skid unit in stainless steel frame construction. Product designation: LEP 12 – CIP System Precipitation PRE. Dimensions approx. 1520 x 970 x 1994 mm. Product-contact materials: Stainless steel 1.4435. Frame and structural components: Stainless steel 1.4301. Integrated shell-and-tube heat exchanger by NEUMO. Centrifugal pump in hygienic design. All pipework fully welded, pharmaceutical specification. Insulated media lines. Fittings including GEMÜ ball valves. Various integrated pressure gauges and instrumentation. Calibrated pressure measurement system (Fluke pressure transducer, measuring range −1 to 20 bar, resolution 0.001 bar, accuracy 0.06% FS). Media connections: NaOH Acetic acid CIP supply CIP return Black steam Black steam condensate Neutralized wastewater Ppsdpfx Aceyl H Taeaow Leak test performed with compressed air. Test pressure range approx. 3.19–3.24 bar. Maximum recorded pressure drop < 0.015 bar during the test period. Result: passed. Application CIP cleaning system for pharmaceutical process plants, especially for precipitation tanks. Suitable for caustic and acid cleaning cycles as well as steam connection. Designed for hygienic applications in pharmaceutical production. Construction Welded, compact skid design with robust stainless steel frame construction. Hygienic piping with defined media routes. Integrated shell-and-tube heat exchanger for temperature control of CIP media. Integrated process pump, valve technology and instrumentation on a compact frame. General tolerances in accordance with EN ISO 13920. Industrial design with crane lifting lugs for transport. Condition New, unused, original packaging. System was exclusively tested as part of Factory Acceptance Test (FAT) and has not been operated in production. FAT / Documentation status Complete Factory Acceptance Tests performed. Leak tests successfully passed. Calibration certificates available. Test protocols fully documented. Complete Documentation List FAT documentation Leak test protocols Calibration certificates P&ID 3D drawings Material and welding documentation Nameplate and manufacturer documentation Key Features Pharma-grade material selection. Compact, ready-to-use skid unit. High-quality components from renowned manufacturers. Full technical documentation available. Immediately available.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 1 850 mm, bendras plotis: 1 400 mm, bendras ilgis: 2 000 mm, plėvelės plotis: 600 mm, Servo-driven, highly flexible packaging machine (volume up to 10 liters, H=1850 mm). In top condition and ready for immediate operation. Heat-sealing machine suitable for all composite films; optionally available with continuously heated, Teflon-coated sealing tools for PE films. Bag widths up to 260 mm (optionally 320 mm) and bag lengths up to 500 mm. The machine is in excellent condition. New control system via touchscreen operating terminal with recipe management. If desired, we are happy to assist with commissioning. We can also ensure long-term supply of spare parts and can provide format sets and accessories for all bag types. (e.g., conversion for block bottom bags can be realized without difficulty) Ppedov Dwbbopfx Acaow Also available in stainless steel design.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Brinox LEP 11 – Pharmaceutical Chromatography System with CIP System New, unused, original packaging Manufacturer: Brinox Model: LEP 11 Configuration: PP6711 with associated CIP unit CS6711 Condition: New – unused – factory sealed (Factory New Condition) Description For sale is a Brinox LEP 11 pharmaceutical chromatography system, comprising the chromatography panel PP6711 and the associated CIP unit CS6711. The system is completely new, unused, and in its original packaging. It was engineered, manufactured, and delivered, but never installed or commissioned. The unit is designed for C1-INH chromatography and is intended for controlled protein purification using sieve bottom vessels in a GMP environment. Process Functions - Transfer of loaded QAE gel (slurry) - Washing and elution processes - Transfer of eluate to pre-precipitation vessels - Gel disposal via container station - Fully automatic CIP and SIP cleaning Technical Data - Fully CIP and SIP capable - Design pressure: –0.9 to +6 bar - Design temperature: +2 °C to +95 °C - Flow rates up to 10 m³/h Podpsyl Ndnofx Acajpw - Adjustable slurry delivery 0.2 – 3 m³/h Specification - Product-contact parts stainless steel 1.4435 - Electropolished Ra ≤ 0.8 µm - FDA and EU compliant seals - Residual drainable construction - Cleanroom panel with Tri-Clamp connections - Magnetically monitored connection bend sections - 0.2 µm vent filter CIP Unit CS6711 - Compact stainless steel skid - Centrifugal pump - Shell-and-tube heat exchanger - Adjustable operating pressure - GMP compliant design The system is in factory new condition and has never been in production use.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Manufacturer: BRINOX Type: LEP 11 – CIP-Skid Year of manufacture: 2020 Design: Pharma / GMP Condition: New, unused, in original packaging LEP 11 CS6710 Package 1 Machine Type Pharmaceutical CIP System (Cleaning in Place) as a compact package unit mounted on a stainless steel frame. Application Automated cleaning of process equipment, chromatography systems, tanks, and piping in the pharmaceutical, biotech, and chemical industries. Suitable for NaOH, acetic acid, WFI, PW, and other cleaning media. Technical Data Heating capacity for CIP medium: From +5°C to +80°C in max. 10 minutes Pump capacity: 1 – 4 m³/h (adjustable) Operating pressure at CIP supply: 1 – 3 bar (adjustable) Measuring ranges: Flow rate: 0 – 10 m³/h Temperature: 0 – +150°C Pressure: 0 – 6 bar Design pressure: -0.9 to +6 bar Design temperature: +2 to +95°C Construction • Compact package unit on stainless steel frame • CIP supply pump as centrifugal pump • Shell-and-tube heat exchanger with leak-proof transfer • Height-adjustable dome feet • Fully drainable design • Maintenance-friendly setup • Industrial high-performance construction Material & GMP Design • Product and cleaning media-contact parts made of stainless steel 1.4435 • Electropolished surfaces Ra ≤ 0.8 µm • FDA-compliant seals (EPDM / PTFE / silicone) • Designed for NaOH 0.3 mol/L at +80°C • Resistant to acetic acid, WFIH, WFIC, PUW Documentation & Quality • Complete GMP documentation • CE compliance • 3.1 material certificates • Complete welding records • Weld seam documentation including photographic evidence • Documented pressure and leak tests • FAT documentation available • Drainability and final rinse certificates available Ppedpfx Acoyl Hwlsaew Condition • New • Unused • Original packaging • Zero operating hours • Immediately available Special Features • Very high thermal cleaning efficiency • Fully adjustable process control • Top-tier pharma GMP execution • High-quality European components • Investment-safe system with complete documentation Location: Germany Inspection possible by appointment

Būklė: labai geros būklės (naudotas), Stiklinis virimo katilas, talpa 300 litrų, su šoninių sienelių valymo funkcija. Komplektuojamas su šilumnešio katilu. Galima pakreipti į abi puses. Pjdoumb Hiepfx Acaepw

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Manufacturer BRINOX Model LEP 12 – CIP System Precipitation PRE LEP 12 CS6721 Package 3 Year of Manufacture 2020 Condition New, originally packaged, unused. The system was only tested at the factory as part of the FAT. No commissioning, no production, no media contact during operation. Description Modular CIP process system for pharmaceutical applications in hygienic stainless steel design. Compact skid-mounted unit with fully integrated measurement, pump, and valve technology. Dimensions Approx. 1520 x 970 x 1994 mm Materials Product-contact parts: Stainless steel 1.4435 Frame/Construction: 1.4301 Welding execution according to EN ISO 13920 Equipment – Shell-and-tube heat exchanger – Hygienic centrifugal pump – Magnetic inductive flow meter – Conductivity measurement – Pressure transmitter – Temperature measuring points – Pneumatic seat and diaphragm valves – Stainless steel frame construction – CIP supply / CIP return – Media connections for NaOH, acetic acid, steam, condensate, wastewater Testing Complete FAT performed, including: – Layout inspection – P&ID diagram check – Maintenance and calibration accessibility check – Documentation verification – Surface roughness inspection – Sensor calibration – Welding documentation check – Leak test with compressed air – passed Calibration certificates available. Material certificates 3.1 available. Complete welding documentation (WPS, WPQR, welding certificates, NDT reports). CE-compliant design. Scope of Supply Complete pre-assembled process module including documentation. Ppsdpfx Asyl H H Tecasw FAT reports, welding records, material certificates, and calibration certificates fully included.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System type: Temperature control unit for wash and elution solutions Year of manufacture: 2020 Serial number: 1003563 Device number: KK6752 Design: Stainless steel skid, pharmaceutical-grade construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control skid on a welded stainless steel frame (skid system) Materials: Product-contact surfaces: Stainless steel 1.4435 / 1.4404 Non-product-contact surfaces: Stainless steel 1.4301 Piping system: Orbital welding (pharmaceutical grade) Fully welded design As-built isometric drawings available Pressure data: Leak test with compressed air Test pressure: 3.37 bar Hold time: 1 hour Result: Leak-free Measurement and control technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit value) Flow monitoring Position feedbacks Motor control On/off pneumatic valves Pressure sensor measuring range: 0–10 bar Electrical connection: Control air: 6 bar Automation-ready (PLT points fully documented) Main components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Podjyl Ipcjpfx Acaopw Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling medium: Cooling brine (inlet/outlet interfaces available) ───── Dimensions / Weight Design: Compact skid unit Industrial-grade for cleanroom/technical areas (Transport and installation dimensions according to layout drawing) Application Area Temperature control for: Washing solutions Elution solutions Process media in biopharmaceutical environments Fields of application: Biotechnology Plasma fractionation GMP production facilities Construction / Configuration Welded stainless steel frame Low-vibration pump installation Hygienic piping layout Full implementation according to P&ID Clear separation of product and non-product areas Service and maintenance accessibility verified Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID (R&I) diagram review completed Layout drawing review completed Condition Year of manufacture 2020 Industrial and pharmaceutical grade Brand new, original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout review P&ID (R&I) review Leak test Sensor calibration Maintenance and accessibility review EN10204 factory certificate Material lists (LBM) As-built isometric drawings Component lists (equipment & PLT points) Special features Pharma GMP-compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant engineering by BRINOX High-end biopharma standard

Gamybos metai: 2020, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamintojas BRINOX Mašinos pavadinimas CIP įrenginys CS6720 Modelis LEP12 – CIP modulis su izoliuotu 200 l talpos rezervuaru Metai 2020 Būklė Naujas, nenaudotas, originalioje pakuotėje, niekada neįdiegtas, niekada neveikęs Pedpoyl H Htjfx Acaopw Įrenginio tipas Modulinis CIP–įrenginys (Cleaning in Place) ant nerūdijančio plieno rėmo, visiškai sumontuotas. Sudarytas iš izoliuoto CIP rezervuaro, centrifuginio siurblio, šilumokaičio, nerūdijančio plieno vamzdynų modulio, vožtuvų technologijos, matavimo ir valdymo technikos bei jungčių žiniasklaidai. Rėmo matmenys apytiksliai 2330 x 1224 x 2127 mm Rezervuaras Darbinis tūris 200 litrų Bendras tūris 278 litrai Cilindrinė konstrukcija su Klopperio galais pagal DIN 28011 Darbinis slėgis nuo -1 iki +3 bar Bandomasis slėgis 5,4 baro Leistina temperatūra nuo -10 °C iki +150 °C Darbinė temperatūra nuo 0 °C iki +85 °C Skysčių grupė 1 Izoliacija – stiklo vata su mažu chlorido kiekiu

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Manufacturer: BRINOX Type: LEP2.3 – Washing Solution Temperature Control Unit Year of construction: 2020 Serial number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System type: Temperature control unit / heating and cooling module for washing solution (CIP or process washing system) Design: Compact, fully pre-assembled skid unit with robust stainless steel frame construction, craneable via integrated lifting points. Frame and Construction: Welded stainless steel industrial frame, free-standing, multi-level piping arrangement for optimal space utilization. Maintenance-friendly accessibility from multiple sides. Integrated cable trays. Piping: Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation for main lines and equipment. Integrated drain and vent fittings. Valve Technology: Several manual ball valves (GEMÜ) in main and bypass lines. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in heating and cooling circuits. Measurement and Control Technology: Temperature measuring points in supply and return lines. Pressure sensors in the process line. Integrated flow measurement. Electrical junction box with protective labelling. Automatic temperature control via pneumatic control valve. Heat Exchanger: Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the washing solution in a closed circuit. Pump Technology: Two electrically driven centrifugal pumps with red lacquered motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning label. Wired sensors and actuators. Prepared for integration into an overriding control or process control system. Application The unit is used for precise temperature control of a washing solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, wash stations for production equipment, and temperature-controlled cleaning processes in pharmaceutical and biotechnological industries. The washing solution is circulated in a closed loop via pumps, temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature regulation is automatic via pneumatic control valves for precise adherence to defined setpoints. Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clear media routing and structured piping layout. Crane-transportable via integrated lifting points. Condition Year of construction: 2020. Very good visual and technical condition. Professional execution for pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, factory acceptance test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contact components. Special Features Fully insulated temperature control module in a compact design with high power density. Premium valve technology (GEMÜ). Multiple integrated measuring and control points. Suitable for validated pharmaceutical processes. Industrial pre-assembled skid solution with clearly structured media flow. Ppjdpfxsyl It Ij Acajw

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, BRINOX LEP13.2 – AS Storage Tempering Unit – GMP – Year 2020 – as new Manufacturer: BRINOX Process Systems LEP13.2 KK6772 Package 12 System type: LEP13.2 – AS Storage Tempering Unit Project: Ammonium Sulphate System Year of manufacture: 2020 Serial number: 1003624 Tag number: MR-ASF-ASF61-KK6772 Location: Germany DESCRIPTION For sale is an as-new tempering unit LEP13.2 in pharmaceutical GMP-certified design, manufactured by BRINOX Process Systems. The unit is constructed as a compact, pre-assembled skid unit and was designed for use in an ammonium sulphate storage system. Complete project and FAT documentation is available. TECHNICAL DATA Type: LEP13.2 – AS Storage Tempering Unit Medium: Ammonium sulphate Design: Pharma / GMP Materials: Stainless steel 1.4435 / 1.4301 Control air supply: 6 bar Pressure and leak tests performed FAT successfully completed MAIN COMPONENTS - 2x KSB Movitec centrifugal pumps - Alfa Laval plate heat exchanger - Electric inline heater - Reflex expansion vessel - Samson control valve - GEMÜ ball valves (manual & pneumatic) - Labom pressure gauge - Extensive sensors & measuring instruments - Insulated piping - Stainless steel skid frame construction APPLICATIONS - Tempering of process media - Use in GMP-regulated production areas - Pharmaceutical and biotechnology plants - Media circuits with temperature control CONSTRUCTION - Compact, closed skid unit - Fully piped - Professionally insulated piping - High-quality industrial components - Service-friendly layout - Fully demountable and transportable Ppjdpfx Acsyl Na Nsasw CONDITION Condition: New, original packaging Year of manufacture: 2020 Project unit Minimal operating hours Excellent visual and technical condition DOCUMENTATION - FAT documentation - Pressure test protocols - P&ID schematics - Layout drawings - Factory certificates according to EN10204 - Parts lists - EU Declarations of Conformity FEATURES - Complete GMP documentation - Premium branded components - Ideal for pharmaceutical and biotech applications - Immediately available - Significantly below new price

Gamybos metai: 1979, būklė: naudotas, Westfalia Separator, last used in a fruit juice processing plant. The separator’s control system has been modernized by GEA. The product is clarified in the centrifuge bowls and discharged under pressure. Solids accumulate in the solids chamber and are automatically discharged at intervals. During CIP (Cleaning-In-Place), the cleaning fluid is pumped in a closed loop. Machine (type): Disc centrifuge Throughput capacity: 22,000 l/h, effective throughput for fruit juice approx. 4,000 l/h Bowl speed: 6,500 rpm Density – liquid phase: 1 kg/dm3 Density – solid phase: 1.4 kg/dm3 Power: 18.5 kW Current: 37 A Voltage: 380 V Frequency: 50 Hz Length: 1,485 mm Width: 850 mm Pedpfx Asyr Ic Nocaepw Height: 1,470 mm Material: Product-contact surfaces made of stainless steel Placement: Mounted on a 685 x 585 mm foundation Equipment: Bowl, drive, inlets for product and displacement fluid, control water inlet with solenoid valve, outlet, solids discharge, control water drain, circulation controller, oil sight glass, brake, regulating valve, hood cleaning, pressure gauge Weight: 1,200 kg

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 3 200 l, Įranga: dokumentacija / vadovas, BRINOX 3,200 L Solution Tank – 316L Stainless Steel – Double Jacket – TÜV / PED Module G – FAT – 2020 – Like New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Type: ELUTION / Solution Tank Capacity: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: Present (CE 0036) Tank Pressure: Operating pressure: -1 / +3 bar Test pressure: According to TÜV inspection Jacket Pressure (Heating/Cooling Jacket): Operating pressure: -1 / +6 bar Test pressure: According to TÜV inspection Temperature range: -20 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Individual inspection Acceptance by notified body (number 0036) FAT – Factory Acceptance Test Ppjdpfx Ajykkhrscaow The tank was tested as part of a documented FAT. The inspections included, among others: • Welding documentation review • Visual inspection of weld seams • Leak testing • Pressure testing • Surface roughness measurement • Calibration test of sensors • Layout and dimensional check • Documentation review Comprehensive FAT report including test records available in full. DESIGN FEATURES • Double jacket for heating/cooling • Completely made from 316L stainless steel • Mirror-polished interior surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / inspection ports • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensors) • Heavy-duty project execution • Lifting lugs for crane handling CONDITION • Never used in production • Warehouse surplus from project stock • Interior absolutely clean • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION – complete and structured A comprehensive, project-specific quality and manufacturing documentation is available for the tank, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design review and certification • Material certificates (3.1) • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing (NDT) reports • Analysis certificates for welding consumables and shielding gas • Surface roughness report • Surface treatment report • Dimensional accuracy inspection • Internal pressure test • Calibration certificates • Assembly documentation • Part drawings • Operating and maintenance manuals Complete documentation folder available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media SPECIAL FEATURE This is not a standard tank but a high-specification, BRINOX project-built vessel in true pharmaceutical quality, featuring validated pressure design, full PED compliance (Module G), documented FAT inspection, and comprehensive quality documentation. Project-grade equipment for sterile applications – immediately available.