Suvirinimo įrenginys

Boehler Terra NX 400

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator Bedpfjfg E Hlsx Aahswi - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Bjdpjd Iipmefx Aahswi Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens

Sąlyga: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 5722, Table clamping surface: 190 x 710 mm Table travel X-axis: 390/360 mm Table travel Y-axis: 150 mm Table travel Z-axis: 280 mm Spindle taper: SK 40 Spindle speeds: 100 - 3100 rpm Longitudinal feed: 0 - 600 mm/min Electrical connection: 380 V, approx. 1.5 kW Required space: 1400 x 1200 x 1500 mm Weight: approx. 680 kg Bsdpfx Asflrg Teahewi

Sąlyga: naujas, Table diameter: 490 mm Table load: 300/150 kg Swivel range: 0-90° manual Table load horizontal: 300 kg Table load vertical: 150 kg Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight approx. 0.1 t Space requirement approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a through-hole in the turntable, greatly expanding your options for flexible positioning and rotary welding of your component. This is particularly advantageous for welding with backing gas. Using these tilt-rotary tables can boost production rates and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Features: - Foot pedal included - Infinitely variable speed control Bedpegvkktefx Aahowi - Very high stability – compact model - Through-hole in turntable - CE marking

Sąlyga: naudotas, Gamybos metai: 1999, Diskinio pjūklo skersmuo: 275 mm Pjovimo sritis prie 90°: apvalus 80 mm Pjovimo sritis prie 90°: kvadratas 70 mm Pjovimo sritis prie 90°: plokščias 100 x 60 mm Pjovimo sritis prie 45°: apvalus 70 mm Pjovimo sritis prie 45°: kvadratas 60 mm Pjovimo sritis prie 60°: plokščias 80 x 50 mm Bwsdpfsl R Nnnex Aahei Spaudimo sritis: 110 mm Sūkių dažnis: 45 / 90 aps./min Bendras galios poreikis: 0,5 kW Staklių svoris: apie 0,07 t Užimama vieta: apie 900 x 700 x 1600 mm Rankinis šalto diskinis pjūklas su: - Staklių pagrindas - Atraminė liniuotė 1500 mm

Sąlyga: naudotas, Gamybos metai: 1986, Kampinis plienas 120 x 13 mm Skylių štampavimo mašina: spaudimo galia 60 t Skylių štampavimo mašina: atstumas nuo krašto 510 mm Skylių štampavimo mašina: talpa (skersmuo x storis) Ø 27 iki 17 mm Lakštų žirklės: plokščia medžiaga 500 x 14 mm Lakštų žirklės: plokščia medžiaga 400 x 16 mm Lakštų žirklės: plokščia medžiaga 180 x 20 mm Lakštų žirklės: plokščia medžiaga 120 x 21 mm Lakštų žirklės: plokščia medžiaga 100 x 22 mm Bendras galingumo poreikis 7,5 kW Mašinos svoris apie 2,5 t Bedpfx Aajt D Nz Aehjwi Užimama vieta apie 1,8 x 0,9 x 1,8 m - Hidraulinės profiliuoto plieno žirklės – kombinuotos -

Sąlyga: geras (naudotas), Gamybos metai: 1998, mašinos/transporto priemonės numeris: 0618012, Technical Data: Bwjdpfx Aovncuboahei - Suitable for welding steel, aluminium special materials, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control system FRONIUS - Water cooling unit FRONIUS - Separate wire feed case - Intermediate cable set (machine – wire feed case): approx. 1 m - 4-roller wire feed, continuously adjustable - MIG/MAG welding torch water-cooled, approx. 4 m - Ground cable - Pressure reducer - Mobile chassis - Connection: 400 V / 6.6 A / 8.7 kVA - Dimensions (approx.): W 650 x H 900 + 450 x D 1100 mm - Weight (approx.): 200 kg

Sąlyga: naujas, Digital technology, the NEOPULSE 400 CW is a three-phase, pulsed MIG/MAG welder designed for heavy industry. Mobile and equipped with a cooling unit and a high-performance wire feed system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Its intuitive and functional digital interface allows for easy adjustment of welding parameters. Bodpfx Aaomxkggehswi MULTIPROCESS WELDING MIG/MAG: - Steel and stainless steel wire: Ø 0.6 to 1.6 mm - Aluminium wire: Ø 0.8 to 1.6 mm - CuSi and CuAl wire: Ø 0.8 to 1.6 mm - Cored (flux-cored) wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile, and cellulosic electrodes (up to Ø 6 mm). DC TIG CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Sąlyga: naudotas, Gamybos metai: 1992, Drilling capacity in steel (diameter): 32 mm Throat depth: 320 mm Quill stroke: 170 mm Spindle taper: MT 4 Speed range: 60 – 1,600 rpm Table size: 570 x 480 mm Total power requirement: 1.6 kW Bwedpfx Asvuz T Noahoi Weight: 650 kg Dimensions: 1,200 x 800 x 2,200 mm Equipment/features: - Automatic feed - Coolant system - Infinitely variable speed control - Adjustable drilling depth stop - Machine lamp - Drill chuck

Sąlyga: naujas, Table diameter: 900 mm Table load capacity: 1.0 t Swivel range: 135 degrees Bwjdpfx Aaofv Axxohji Rotational speed: 0.12 - 1.2 rpm Faceplate height: 820 mm Welding current: 500 amperes Total power requirement: 0.75 + 0.55 kW Machine weight: approx. 1.1 t Space requirement: approx. 1.5 x 1.0 x 0.9 m - Self-locking gearbox: no overrun or backlash under eccentric load. - Electronic components by Schneider, Siemens, and Delta. - Infinitely variable, frequency-controlled turntable speed. - High stability due to robust construction. - Welding current transmission. - CE certificate. - Excellent price/performance ratio. - The D-HBE series is supplied as standard with cable remote control and foot switch.