BLOHM HFS 12

BLOHM HFS 12

Sąlyga: geras (naudotas), šlifavimo skersmuo: 1 600 mm, šlifavimo ilgis: 6 000 mm, Manufacturer: CINCINNATI Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 hydrostatic steady rests Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Centre height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel size: 914 x 101.6 x 304.50 mm Wheel speed: 1800 rpm Dimensions (approx.): Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Weight: 120,000 kg Itjdpjvvvw Eefx Af Ieb Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend you verify all key details.

Sąlyga: beveik kaip naujas (naudotas), tekėjimo skersmuo: 1 500 mm, MAXIMUM WORKPIECE DIAMETER: 1600 mm. MAXIMUM WORKPIECE LENGTH: 3000 mm. SPINDLE DIAMETER: 83 mm. OUR MACHINE IS FULLY OPERATIONAL AND TROUBLE-FREE. ALL SPEEDS AND AUTOMATIC FEEDS ARE IN VERY GOOD CONDITION. Itedpfor Ui R Nox Af Isb

Sąlyga: geras (naudotas), Gamybos metai: 1963, Vertical Turning Lathe Manufacturer: JUNGENTHAL, Type: DK 1400, Year: 1963, equipped with 1-axis digital readout. Maximum turning diameter: 1400 mm Faceplate: 1250 mm automatic turret head Spindle speeds: 3.5-180 rpm Itodovi Hryspfx Af Iob Feeds: 0.063 - 3.15 mm/rev Rapid traverse: 1800 mm/min For additional specifications, please refer to the data sheet. Machine documentation available. Dimensions: Length 4 m, Width 2.4 m, Height 3 m, Weight 16 t In good overall condition.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, centro aukštis: 150 mm, šlifavimo ilgis: 620 mm, plotis centre: 680 mm, šlifavimo disko skersmuo: 350 mm, bendras plotis: 500 mm, Condition of the machine: The machine is currently in a used, non-refurbished condition. The following work will be carried out on the machine: - Complete disassembly of the entire machine down to the guideways - Replacement of all seals and wear parts throughout the machine - Replacement of the X-axis feed screw - Replacement of the main bearings in the workpiece spindle - Replacement of the grinding spindle - All assemblies of the machine will be restored to an as-new condition Geometry: - Scraping the X-axis guideway - Scraping the Z-axis guideway - Grinding the X-axis table - Grinding the Z-axis table - Grinding of the upper tables - Grinding of the assembly housings (workpiece spindle head, grinding spindle head, and tailstock) - Preparation of a measurement protocol for the TSCHUDIN cylindrical grinding machine Painting: Iodpforz Nflsx Af Istb The main assemblies will be newly painted; the remaining parts of the machine will retain the original paintwork Electronics: The entire machine's electronics will be checked and tested; defective switches and cables will be replaced

Gamybos metai: 1993, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeder for 2 workpieces, in good condition Tensile force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Chuck diameter for pull heads: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Itsdpfscc D Ddex Af Ieb Power supply / connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. The locking of the shank and end-piece holders is hydraulic. The machine comes with a coolant system with an integrated magnetic conveyor for chip removal, allowing operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale production. It is in very good condition and still retains its original paintwork. The machine is under power and can be inspected at our warehouse.

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Module size: 5 mm, max. workpiece diameter: 180 mm, axial travel: 400 mm, shank travel: 200 mm, cutter diameter: 150 mm, tool speed: 2250 rpm, table speed: 250 rpm, max. tool clamping length for bore cutter/shank cutter: 236 mm/360 mm, control system: Liebherr PC-NC. Documentation available. On-site inspection possible. Itsdpfx Aovpviuof Iob

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 655 mm, tekinimo skersmuo virš slankiojančio stalo: 655 mm, tekėjimo ilgis: 5 000 mm, Pasukimo skersmuo virš staklių lovos 655 mm Pasukimo skersmuo virš atramos 390 mm Tekinimo ilgis 5000 mm Veleno anga 82 mm Veleno apsisukimų dažnis 9-1120 aps./min. Pado greitis 0,049-3 mm/aps. Bendra galia 12 kW Iodpfx Afjw N D T So Iotb

Sąlyga: geras (naudotas), Gamybos metai: 1992, Favretto MB 130 – Technische Daten Maschinentyp: tangentiale (horizontale) Flachschleifmaschine Baujahr: 1992 Tischgröße: 1700 × 400 mm Magnetspannplatte: ca. 1300 × 400 mm Magnetplattenhöhe: 40 mm Längsverfahrweg (X-Achse): 1380 mm Querweg (Y-Achse): 450 mm Vertikalweg (Z-Achse): 550 mm Abstand zwischen Spindelmitte und Tischoberfläche: 203 mm (min) bis 753 mm (max) Schleifscheibenabmessungen: 400 mm Durchmesser × 152 mm Breite × 100 mm Bohrung Spindeldrehzahl: ca. 1400 U/min Iedpfxst Rwvzs Af Iotb Längsvorschub: 2000 bis 40000 mm/min Quer-Vorschub: 50 bis 3000 mm/min Vertikal-Vorschub: 700 mm/min Antriebsleistung Schleifkopf: ca. 15 kW Gesamtanschlusswert: ca. 25 kW Maximale Tischbelastung ohne Magnetspannplatte: ca. 1500 kg Maximale Tischbelastung mit Magnetspannplatte: ca. 1205 kg Maximale Schleifkapazität (L × B × H): ca. 1500 × 600 × 550 mm Maschinengewicht: ca. 7100 kg

Gamybos metai: 1992, Sąlyga: naudotas, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9,500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece feed and IONIC measuring control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 high mm Workpiece data: Grinding height: approx. 1.5 – 50 mm Grinding width: approx. 20 – 120 mm Vertical slide adjustment, each: approx. 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed continuously adjustable: 40 - 235 mm/sec. Grinding wheel speed (30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (per spindle): 37 kW Total drive approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (top and bottom infeed, dresser, and workpiece table rotation), direct input of all grinding data, and in conjunction with • IONIC measuring control no. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers corresponding infeed of the grinding wheels, continuous measurement data displayed on the monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for the drive motors and the grinding wheel speed • Gantry design for increased rigidity and improved grinding accuracy • Rotational workpiece transport with continuously variable speed control as the 4th axis • Position control device for monitoring the position height of the lower grinding wheel • 2 adjustable workpiece hold-downs at both in-feed and out-feed, with height monitoring, simple raw part stacking device, and finished part discharge via conveyor belt • Semi-inclined, side-mounted grinding wheel dressing unit with pre-programmable dressing sequence, integrated as CNC axis in the control, with safety shut-off • Large separate switch cabinet, automatic central lubrication system, advanced pneumatic setup • Large PROMATEC (F) coolant unit with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction system, etc. Itsdpot Hw Naofx Af Ieb This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in large series, such as stamped parts, piston rings, hydraulic parts, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: net – upon receipt of invoice This represents a rare opportunity regarding both condition and price. If you require another grinding machine – especially from the manufacturer DISKUS – please send us your inquiry.

Sąlyga: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Iodpfet Hww Dex Af Iotb Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice