Granuliavimo linija
BKG Nordson Kreyenborg Extruder ES 100 mit K-SWE 160 RS und UWG

Name: BKG Nordson Kreyenborg Extruder ES 100 mit K-SWE 160 RS und UWG
Brand: BKG Nordson Kreyenborg
Availability: InStock

Būklė

Naudotas

Vieta

Wuppertal

Granuliavimo linija BKG Nordson Kreyenborg Extruder ES 100 mit K-SWE 160 RS und UWG

BKG Nordson Kreyenborg Extruder ES 100 mit K-SWE 160 RS und UWG

Duomenys apie mašiną

Mašinos pavadinimas:: Granuliavimo linija

Gamintojas:: BKG Nordson Kreyenborg

modelis:: Extruder ES 100 mit K-SWE 160 RS und UWG

Būklė:: dilaminuotas dirbtuvėje (naudotas)

Kaina ir vieta

Vieta:: Vohwinkeler Strasse 173, 42329 Wuppertal, Deutschland

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A4101978

Nuorodos numeris:: 2452

Atnaujinimas:: paskutinį kartą atnaujinta 24.12.2024

aprašymas

Stock No. 2452

1 used, partially overhauled and function-tested pelletizing line
Throughput up to 500 kg/h depending on material, comprising:
- Kreyenborg stuffing unit SW 100, drive 7.5 kW
- BKG single screw extruder Ø 100 mm – 35 L/D,
drive 132 kW – AC frequency controlled
- Screw speed up to 143 rpm
- Screw channel depth 14 mm
- Installed heating power approx. 35 kW
- 1x atmospheric degassing zone (vacuum pump optional at extra cost)
- Screen changer double piston Kreyenborg K-SWE 160 RS backflush with screen area 244 cm²
Podpfjd Sg I Isx Adzept
- BKG underwater pelletizer AH 300, complete with:
- Start-up valve incl. hydraulic station
- Pelletizer with 4 kW drive
- Water pump 2.2 kW
- By-pass system, water tank with 9 kW installed heater plus heat exchanger
- BKG centrifugal dryer TWE 300 with 3 kW drive
- Pellet classifier screen
- Control cabinet with Siemens touch panel (updated)

OPTIONAL at extra cost:
ᐳ Vacuum pump
ᐳ Material conveying system, big-bag station
ᐳ Process water chiller / temperature control

Further pelletizing lines available ex Works Wuppertal, ask for our current machine stock list or visit us.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Tiekėjas

Registruotas nuo: 2010

20 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 202 7... skelbimai

+49 202 2... skelbimai

Faksas:

įsiminti

Dalintis Pranešti apie skelbimą

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Wuppertal

1 201 km

Granuliavimo linija
BKG Nordson KreyenborgExtruder ES 100 mit K-SWE 160 RS und UWG

Skambinti

Būklė: dilaminuotas dirbtuvėje (naudotas), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h, material-dependent, consisting of: Kreyenborg stuffing unit SW 100, drive 7.5 kW BKG single screw extruder, Ø 100 mm – 35 L/D ratio, drive 132 kW – AC frequency-controlled Screw speed up to 143 rpm Screw channel depth 14 mm Installed heating capacity approx. 35 kW Podpjh Eyd Rsfx Adzspt 1x atmospheric degassing with melt pressure return device ("Stuffer") * Kreyenborg double-piston screen changer K-SWE 160 RS with backflush capability, 244 cm² screen area BKG underwater pelletizing system AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra cost ᐳ * Vacuum pump ᐳ Pellet classifier sieve, conveying system, Big-Bag station ᐳ Process water cooling/heating unit Additional pelletizing systems available ex works Wuppertal; ask for our current machinery stock list or visit us.

Peržiūrėti detales

Mažas skelbimas

Horizontalusis apdirbimo centras DECKEL DMC 80 H duoBLOCK

Vokietija

1 260 km

Horizontalusis apdirbimo centras
DECKELDMC 80 H duoBLOCK

Skambinti

Būklė: naudotas, Gamybos metai: 2006, Technical Details: X-axis travel: 800 mm y-axis travel: 800 mm z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 CNC control: SIEMENS 840D shopmill Tool magazine capacity: 240 positions Pallet size: 630 x 630 mm Spindle: 52 kW / 430 Nm Total power requirement: 87 kVA Machine weight approx.: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, IKZ (internal coolant supply) 40 bar, Prepared for Renishaw MP 10 infrared measuring probe, probe not included, Mechanical tool breakage detection, MQL (minimum quantity lubrication), Through-spindle air blast, Electrical oil mist extraction, Electronic handwheel, Podpfx Aepumdcodzjpt TRANSMIT function, Precision package, BA 4, Laminated safety glass (right door), Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including loading station, stacker crane, master computer and 10 pallets. Approx. 98,500 hours main switch ON Approx. 45,500 spindle hours

Peržiūrėti detales

Mažas skelbimas

Wuppertal

1 201 km

Granuliavimo linija
BKG Nordson KreyenborgExtruder ES 100 mit K-SWE 160 RS und UWG

Skambinti

Būklė: dilaminuotas dirbtuvėje (naudotas), Stock No. 2452 1 used, partially overhauled and function-tested pelletizing line Throughput up to 300 kg/h, material-dependent, consisting of: Kreyenborg stuffing unit SW 100, drive 7.5 kW BKG single screw extruder, Ø 100 mm – 35 L/D ratio, drive 132 kW – AC frequency-controlled Screw speed up to 143 rpm Screw channel depth 14 mm Installed heating capacity approx. 35 kW 1x atmospheric degassing with melt pressure return device ("Stuffer") * Kreyenborg double-piston screen changer K-SWE 160 RS with backflush capability, 244 cm² screen area BKG underwater pelletizing system AH 300, complete with: Start-up valve incl. hydraulic station Granulator with 4 kW drive Water pump 2.2 kW By-pass system, water tank with 9 kW installed heating and heat exchanger BKG pellet centrifuge TWE 300 with 3 kW drive Control cabinet OPTIONAL at extra cost ᐳ * Vacuum pump ᐳ Pellet classifier sieve, conveying system, Big-Bag station ᐳ Process water cooling/heating unit Pjdpfx Adei Dtb Uezopt Additional pelletizing systems available ex works Wuppertal; ask for our current machinery stock list or visit us.

Peržiūrėti detales

Mažas skelbimas

Pramoniniai robotai ABB IRB 6640-235/2.55

Elchingen

1 204 km

Pramoniniai robotai
ABBIRB 6640-235/2.55

9 500 €

VB plius PVM

Skambinti

Mažas skelbimas

Diafragminis siurblys, maitinimo siurblys Abel HMD-G-50-0500

Voerde

1 204 km

Diafragminis siurblys, maitinimo siurblys
AbelHMD-G-50-0500

Skambinti

Mažas skelbimas

Bitburg

1 305 km

Hakerio peilis
EpperM 40 x 40 konkav

14 €

Fiksuota kaina plius PVM

Skambinti

Mažas skelbimas

Root

1 400 km

CNC staklės
HYUNDAIHIT 250 M

Skambinti

Mažas skelbimas

"Genie GS-1432m Micro" elektrinis žirklinis keltuvas Genie GS1432m E-Drive

Dortmund

1 151 km

"Genie GS-1432m Micro" elektrinis žirklinis keltuvas
GenieGS1432m E-Drive

Skambinti

Mažas skelbimas

Metalo šalinimo įranga ALREC-TEC GmbH METALL-KICKER 400

Mömbris

1 144 km

Metalo šalinimo įranga
ALREC-TEC GmbHMETALL-KICKER 400

Skambinti

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25-029, bendras plotis: 800 mm, bendras ilgis: 4 700 mm, bendras aukštis: 1 900 mm, įvesties srovės tipas: trifazis, energijos suvartojimas: 2 kWh, Very good metal separator for separating all metals (including stainless steel, V2A) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approximately 1 mm particle size. Suitable for metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately operational, can be inspected and tested. Camera option available upon request! If the machine is too small, we can also manufacture larger models. This is our demonstration machine. Maximum throughput depends on material and application. Pedpoqabm Esfx Adzspt Price negotiable!

Peržiūrėti detales

Mažas skelbimas

CNC tekinimo ir frezavimo centras MAZAK SQT 200 MS

Dieburg

1 171 km

CNC tekinimo ir frezavimo centras
MAZAKSQT 200 MS

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 1999, CNC Lathe MAZAK SQT 200 MS Year of manufacture: 1999 With specified tools and sub spindle Control: Mazatrol PC Fusion CNC 640T Technical Data: Max. swing diameter: 525 mm Max. swing diameter over cross slide: 350 mm Max. turning diameter: 300 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 4,000 rpm Main drive power: 15 kW Max. torque: 350 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Spindle positioning C-axis: 0° - 360°/0.001° Second spindle: Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Ppjdpfex Hgl Hox Adzst Max. torque: 57 Nm Indexing: 72 positions/5° Tool turret: Number of tool stations: 12 (flexibly equipped with stationary and driven tools) Turret indexing time: - 1st station: approx. 0.2 s Driven tools: Drive power: 3.7 kW Max. torque: 35 Nm Speed range: 25 – 4,500 rpm Travel paths: Turret travel: X-axis: 190 mm Z-axis: 575 mm B-axis: 585 mm Rapid traverse: X-axis: 30 m/min Z-axis: 30 m/min B-axis: 18 m/min Feed range: X/Z-axis: 0 – 5,000 mm/min C-axis: 1 – 2,000° / min

Peržiūrėti detales

Reklamuokite čia