Automatinės perforavimo ir lenkimo staklės

BIHLER GRM 100

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Equipment: 1 right-hand gripper feed 3 pressing modules, each with 180 kN = total 540 kN Tsdpfx Ajma S Nrjg Ref 4 standard slide units 1 narrow slide unit Working range: Wire diameter range: up to 10 mm Strip width: up to 100 mm Feed length: up to 250 mm Output: up to 135 cycles/min

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 170 kg, šlifavimo veleno greitis: 45 000 aps./min, veleno greitis (min.): 5 000 aps./min, veleno greitis (maks.): 45 000 aps./min, spaustuvo skersmuo: 140 mm, spaudos ilgis: 1 100 mm, Werkstückspann-Durchmesser : ø 3 – 140 mm Werkstücklänge : 50 – 1.100 mm Zentrierbohrungs-Durchmesser : ø 1 – 100 mm Werkstückgewicht : max. 170 kg Zentrierbohrungswinkel : 60 ° Genauigkeit : < 1 µm (Submikrometer-Präzision) Spindeldrehzahl : 5.000 – 45.000 U/min Schleifkegel-Bewegungen : 3+1 Rotation Orbitalrotation Hubbewegung +1 Werkstückrotation Quirlig-Schleiftechnik : Inklusive (Schraffiertes Schleifbild) Schleifprozess : Halbautomatisch, CNC t Steuerung : Beckhoff CNC-Achsen : Z-Achse Industrie 4.0-Kompatibilität : Vorhanden Halbautomatische Kegelschleifscheiben-Abrichtung: Inklusive Werkstückrotation : Optional verfügbar Absaugung und Filterung : Optional verfügbar Einsatzbereiche : Präzisionsschleifen, Luftfahrt, Automobil, Maschinenbau usw. Vorteile: Submikrometer-Präzision: Erzielen Sie Submikrometer-Präzision (< 1 µm) beim Schleifen dank Schweizer Ingenieurskunst und robustem Maschinendesign. Nachhaltige Zuverlässigkeit: Gewährleisten Sie eine zuverlässige und nachhaltige Bearbeitung. Kosteneffizienz & hohe Produktivität: Profitieren Sie von niedrigeren Produktionskosten und hoher Produktivität dank kurzer Schleifprozesse und reduzierter Bearbeitungszeiten nachfolgender Prozesse (Rundschleifen). Quirlig-Schleiftechnik: Erleben Sie einen optimierten Schleifprozess mit der Quirlig-Schleiftechnik. Präzise geschliffene Zentrierbohrungen mit schraffiertem Schleifbild. Das schraffierte Schleifbild sorgt dafür, dass beim Einspannen des Werkstücks zwischen den Spitzen beim Rundschleifen Öl zurückgehalten wird, wodurch sich ein Mikroschmierfilm bildet. Dieser verhindert unerwünschtes Trockenlaufen beim Rundschleifen. Einfache CNC-Steuerung: Profitieren Sie von der sehr einfachen Bedienung und dem Schleifprogrammspeicher dank Beckhoff-Steuerung und Z-Achsen-Servobewegung. Industrie 4.0: Voll kompatibel mit Industrie 4.0-Anwendungen dank Beckhoff-Steuerung. Geringe Wartungskosten: Profitieren Sie von niedrigen Wartungskosten während der gesamten Lebensdauer der Maschine dank hochwertiger Schweizer Fertigung. Tedpjgb Ec Hofx Ag Rof Die Zentroflex SA-Serie der Zentrierlochschleifmaschinen ist für hochpräzises Rundschleifen in den Bereichen Luftfahrt, Automobil und Maschinenbau konzipiert. Darüber hinaus ist die Zentroflex SA-Serie die ideale Lösung zur Wiederherstellung von Teilen nach Verzugserscheinungen durch Wärmebehandlung oder zur Reduzierung der Rundschleifkosten. Die Z-Achse wird im CNC-Betrieb von einem Servomotor angetrieben. Das Werkstück wird manuell geladen, entladen und gespannt. Die Einstellungen erfolgen über das CNC-Bedienpanel und das Schleifen startet per Knopfdruck. Während des Schleifvorgangs sind keine weiteren manuellen Einstellungen oder Kontrollen notwendig. Kontaktieren Sie uns für weitere Informationen.

Sąlyga: naudotas, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar capacity: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes CNC-controlled - Slide unit 1.2: X and Z axes CNC-controlled - Slide unit 2.1: X and Z axes CNC-controlled - Slide unit 2.2: X and Z axes CNC-controlled - Slide unit 3.1: X and Z axes CNC-controlled - Slide unit 3.2: Z axis CNC-controlled - Slide unit 4.1: X and Z axes CNC-controlled - Slide unit 4.2: Z axis CNC-controlled - Slide unit 5.1: X and Z axes CNC-controlled - Slide unit 5.2: Z axis CNC-controlled - Slide unit 6.1: Z axis CNC-controlled + SCARA axis - Slide unit 6.2: X and Z axes CNC-controlled - Slide unit 6.3: X axis CNC-controlled ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW WEIGHT AND DIMENSIONS - Footprint: 3329 x 2032 mm - Height: 2654 mm - Weight: 7,100 kg Tedpfx Agouhants Ref HOURS - Power on hours: 45,965 h - Production hours: 19,065 h ACCESSORIES - CNC Siemens 840D (PL) double NCU - 2 CNC control panels - 6 TOPLUS collet receivers with integrated stop - 1 counter spindle at position 6.1 - Clamping device in counter spindle: Röhm chuck KFD-HS 110/3 - Counter spindle internal coolant supply - CNC options for counter spindle / polygon turning device - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft at positions 1, 2, 3 - Preparation for 2 additional operations with electronic shaft at positions 4, 5, 6 - STAUBLI robot type TX60 (6 axes) - Robot gripper with external double clamping, type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps 40 bar - BÜSCHEL oil mist extraction system - RIEDEL cooling unit - ARTIS pre-installation

Sąlyga: geras (naudotas), Gamybos metai: 2004, Spindle bore: 60 mm Turning length: 280 mm Control system: Siemens 840 D Main spindle speed: 6300 rpm Drive power (spindle motor): 3.3 kW Turret 1: Disc turret Number of tools in turret 1: 8 Tool system: DIN 69 880 / 25mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5500 N Rapid traverse: 24 m/min Milling spindle drive power: 5.000 kW Turret 2: Dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Z-axis travel: 80 mm Feed force: 5500 N Rapid traverse (X-axis): 16 m/min Rapid traverse (Z-axis): 24 m/min Machine weight: approx. 2.5 t Space requirement: approx. 6.0 x 2.0 x 2.0 m The INDEX ABC is a compact CNC lathe for short-turned parts made from bar stock. Tsdpewbvhajfx Ag Rsf It features a slant-bed design with two independent turrets. The upper turret is mainly designated for internal machining and cut-off-side operations, while the lower turret handles external machining. This turret configuration allows for collision-free operation and simple programming with high tool availability. The large open working area promotes optimal chip flow. Working area features two turrets: "Turret 1": - Disc turret with 7 radially arranged tool positions Ø 25 mm DIN 69880 and one position for the reinforced synchronized spindle at turret station 8. With an adapter, tools with 1'' shanks may also be used. The turret head is prepared for the V-guide system. - Synchronized spindle for backworking, allowing simultaneous parallel machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-drilling unit. Starting from the center of the working spindle in a clockwise direction, three stationary back drilling tools are arranged. These are located on the pitch circle of the synchronized spindle. Backworking takes place simultaneously to main spindle machining. Two additional tools can also be mounted and may be fitted with driven tool units. "Turret 2": - Turret with 6 symmetric dovetail tool holders, each station equipped with two mounting bores for cylindrical shank tools. The following tool systems can be used: - Stationary tools moveable in the Z-direction - Driven tools with Ø25 mm cylindrical shank (two positions per station can be equipped) - Including bar feeder LM 3200 - + various accessories (various diameter guide bushings/tool holders) Technical data: - Bar material diameter: (Ø 25 / Ø 36 / Ø 52) --> Round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> Square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> Hexagon SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> Octagon SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Maximum bar length: 3200 mm --> From Ø 25 mm bars: minimum. 2,500 mm --> Up to Ø 25 mm bars: minimum. 1,500 mm --> Bar tray capacity = approx. 300 = 6 x Ø 52 mm bars Mass (bar feeder): 700 kg

Sąlyga: naudotas, Gamybos metai: 2007, Maximum gear diameter: 2000 mm Workpiece diameter: 2700 mm Todov E R Eijpfx Ag Rsf Table diameter: 1500 mm Maximum module: 22 Control system: 840D Rotational speed: 3.5 rpm Maximum table load: 20,000 kg Center distance: 70...1220 mm Stroke length: 30...330 mm Strokes per minute: 10...200 spm Total power requirement: 138 kW Machine weight approx.: 38 t Space requirement approx.: 11x5 m Machine: Full CNC machine with electronic hobbing synchronization for C and D axes and digital INDRAMAT drive technology. Self-rigid welded machine bed construction. Radial axis (X-axis) with hardened guideways, sliding guide with wrap-around, Longitudinal guide with recirculating roller shoes. Precision ground, preloaded ballscrew with backlash-free preloaded nut. Digital AC drive technology with backlash-free gearbox. Linear measurement system for radial positioning. Free-standing machine table with electrohydraulically backlash-free preloaded twin worm gear, segment gear diameter 1365 mm, hydrostatic axial and radial bearings, automatic workpiece weight compensation. Table bore diameter 500 mm continuous, open at the bottom. Water-cooled digital AC servo motors. The machine must be installed on a foundation. Column: Machine column as highly rigid cast construction for 1200 mm axial travel. Axial axis (Z-axis) with hardened guideways, sliding guide, longitudinal guide and wrap-around with recirculating roller shoes. Precision ground ballscrew with backlash-free preloaded nut. Digital AC drive technology. Encoder for axial positioning. Shaping Head: SK 4.1 with hydraulic NC servo drive for shaping spindle movement and gear cutting wheel lift-off, stroke length 330 mm, shaping spindle diameter 160 mm. Hydrostatically mounted shaping spindle, straight and side guidance of the lift-off. Maximum tool diameter: 300 mm. Drive motor power: 30 kW Number of strokes: 10 - 200 spm, stroking speed: 5 - 45 m/min. Shaping spindle speed for working and return stroke can be programmed independently. Spindle speed is constant in the cutting area. Maximum gear cutting wheel speed: 10 rpm, digital AC drive technology. Gear cutting wheel lift-off direction can be manually reversed for internal and external gear cutting. Shaping spindle axis can be manually adjusted up to 50 mm off machine center to avoid return stroke collision of the gear cutting wheel.

Gamybos metai: 1984, Sąlyga: geras (naudotas), Bihler RM 40 (1984) – automático de estampado, punzonado y conformado multideslizador. La máquina se presenta con 5 carros deslizadores, aunque dispone de un sexto carro adicional. Se ofrecen varios desenrolladores, tanto para fleje como para alambre. Máquina equipada con prensa de 8 toneladas y 5 o 6 carros, con sistema de sujeción hidráulica para alambre o fleje. Una de las máquinas está equipada con un sistema adicional de alimentación trasera a través del orificio central. Tsdpfxjh T Ulyo Ag Rjf

Gamybos metai: 2007, Sąlyga: naudotas, Wheel diameter - max. 400 mm Wheel width - mm Module - max. - Workpiece diameter 36-300/400 mm Centre distance 135-290 mm Spindle speeds - stepless up to 3000 rpm Centre distance between tips 100-550 mm Control system Machine weight approx. 4,000 kg Todpfxsgr Hars Ag Rof Required floor space approx. 2000 x 3055 x 2788 mm Control system: CNC Siemens 840 D Testing methods: - Single-flank rolling test - Double-flank rolling test - Structure-borne noise test - Heli test in double-flank contact Features: - Use of up to 6 test slides - Maximum testing precision and repeatability - Machine table with workpiece drive - Swivelling pneumatic unit - Spray oil lubrication (type: Vogel) - Oil mist extraction (type: Elbaron)

Sąlyga: naudotas, Tool clamping area: 0 mm Weight: 0 t Titanium-coated solid carbide slot drills available in the following diameters and various quantities: Ø 9.7 - 11.7 - 13.7 - 15.7 - 17.7 - 19.7 - 20.5 - 21 mm Todpfx Ajd Ihcasg Rsf Milling cutters up to and including 15 mm: €15/each. From 15 mm: €20/each!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 8044000703A, Siemens 840 D Control Country of Manufacture: EU - Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip pan) 4228x2260x1775 mm (with chip conveyor) Net Machine Weight: 3,400 kg TECHNICAL SPECIFICATIONS Tjdew T Sqyjpfx Ag Ref CTX 310 ecoline V1/V3 New Design Working Capacity Maximum swing over bed: 330 mm Swing over cross slide (X): 260 mm Maximum turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Center height: 190 mm Distance between centers: 581 mm Feed Drive Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C Axis with Siemens Control Speed: 0 – 100 rpm Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing inner diameter: 100 mm Spindle bore: Ø 74.3 mm Max bar capacity: 51 mm Main Drive with Siemens Control Drive power (40% / 100% DC): 16.5 / 11 kW Torque (40% / 100% DC): 166.5 / 112 Nm Max speed: 5,000 rpm Tool Turret Number of tool stations: 12 Tool holder: DIN69880 (VDI 3425) Cylinder diameter: 30 mm Tool change (with lock): 0.95 sec Tool change (without lock): 0.4 sec Live Tool Turret with Siemens Control Number of driven tools: 12 Drive power (40% DC) at 4,000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Travel, automatic: 396 mm Quill bore: flange Max quill axial force: 400 daN Hydraulic unit Tank capacity: 50 L Max pressure: 50 bar Coolant System Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow at 5 bar: 30 L/min Electrical Connection Max power requirement: 21 kVA Voltage: 400V Frequency: 50–60 Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental Conditions Ambient temperature: +15 to +35°C Max humidity: 75 % Unless otherwise stated, the technical specifications are provided without guarantee.

Sąlyga: naudotas, Gamybos metai: 2009, veikimo valandos: 6 000 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 500 mm, valdiklio modelis: Heidenhain iTNC530, veleno greitis (maks.): 36 000 aps./min, GF Mirkon XSM600U X: 800 mm Y: 600 mm Z: 500 mm A axis: +30° / -100° C axis: 360°, infinite rotation Tsdpfx Aewa R A Njg Rsf Spindle HSK50: max. 36,000 rpm, 25 kW Handwheel HR410 Tool changer: 60 positions Rotary table including 3R clamping system Chip conveyor Coolant system with 20 bar through-spindle coolant (IKZ) Tool measurement: Blum Laser 3D probe: M&H Pallet automation with 21 pallets – pallets are not included in the scope of delivery The machine is offered on behalf of a customer!