Radialinis rankinis grąžtas

BF-TEC Z3050x16

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard Cjdou Aa I Sspfx Aahjgp • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: naujas, Gamybos metai: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with Coolant System B (Option 25) Cgjdpsd Hy Eljfx Aahop (comprising separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom-head emergency stop, reversing switch (for clockwise and counterclockwise operation), motor protection switch Stepless speed adjustment, digital speed display, Feed overload protection, protection class IP54, connection plug Spindle guard with electrical interlock Technical data: Drilling capacity steel E335 (St 60): 40 mm Tapping: Steel E335 (St 60): M24 Cast Iron EN-GJL-200 (GG20): M30 Short spindle: MK 3 Spindle stroke: 120 mm Throat depth: 293 mm Column diameter: 115 mm Machine table, usable surface: 514 x 360 mm T-slots, number x width x distance: 2 x 14 x 224 mm Distance spindle-table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height without options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, TECHNICAL SPECIFICATIONS Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distance Between T-slots: 65 mm From spindle centre to underside of counterholder: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal: 4000 mm/min Cross: 4000 mm/min Vertical: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swivelling: 0-140° Spindle feed Quill diameter: 90 mm Quill travel: Manual Feed: 75 mm Weight: Approx. 2300 kg SCOPE OF SUPPLY Includes, among others (list not exhaustive): ABENE milling machine Heidenhain control Toolholder set Coolant pump Levelling feet Mounting block Cgodpfxowuurwj Aahsp Complete operating documentation Exact scope of supply according to photo series.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control system - CNC or manual operation possible - Movable vertical milling head with extendable spindle - Counter support for long milling arbors - Hydraulic tool clamping - Automatic gear transmission - Automatic clamping on X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measuring - Collision protection coupling on the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle headstock: 150 mm Main drive: - Pole-changing three-phase brake motor: gearbox with forward/reverse operation - Power: 3.7 / 4.4 kW - Working spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) - Tool clamping: disc spring pack - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axes: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Required space (including safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V Csdpfx Aajwhk Ubohegp - Total connected load: 12.5 kVA - Floor loading: 3000 kg/m²

Būklė: beveik kaip naujas (naudotas), Donau Donauflex 135 greita radialinė gręžimo staklė Gamintojas: Donau Tipas: Donauflex 135 Pagaminimo metai: 2020 Būklė: Labai gera, naudota, bet kaip nauja Iš karto pristatoma iš sandėlio. Cedpfx Aexcyz Roahjgp

Būklė: naujas, Fastech Horizontal Band Saw Semi-Automatic BMSY 360 DGH ECO Round cutting capacity mm: 360 Flat cutting capacity mm: 510 x 360 Square cutting capacity mm: 360 +30° round cutting capacity mm: 360 +30° flat cutting capacity mm: 440 x 360 +30° square cutting capacity mm: 360 +45° round cutting capacity mm: 360 +45° flat cutting capacity mm: 390 x 360 +45° square cutting capacity mm: 360 +60° round cutting capacity mm: 200 +60° flat cutting capacity mm: 200 x 360 +60° square cutting capacity mm: 200 -30° round cutting capacity mm: 360 -30° flat cutting capacity mm: 440 x 360 -30° square cutting capacity mm: 360 -45° round cutting capacity mm: 360 -45° flat cutting capacity mm: 390 x 360 -45° square cutting capacity mm: 360 -60° round cutting capacity mm: 260 -60° flat cutting capacity mm: 260 x 360 Cedpfsg Ekttox Aahegp -60° square cutting capacity mm: 260 Main drive motor power kW: 3 Hydraulic pump power kW: 0.37 Coolant pump motor power kW: 0.12 Infinitely variable band speed: m/min 20 - 100 Saw blade dimensions mm: 4800 x 34 x 1.1 Worktable height mm: 860 Weight kg: 1450 Length / Depth / Height mm: 2650 / 1210 / 1870 Double miter saw Infinitely variable band speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw blade tensioning Saw blade cleaning brush Digital miter angle display

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 500 mm, Y ašies eiga: 2 000 mm, Z ašies eigos atstumas: 1 250 mm, stalo apkrova: 12 000 kg, ašies skersmuo: 130 mm, veleno greitis (maks.): 1 000 aps./min, stalo ilgis: 1 800 mm, stalo plotis: 1 600 mm, Heidenheim TNC 355 Cjdpfoyf Uc Aox Aahsgp

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 480 mm, Z ašies eigos atstumas: 310 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, plunksnos brūkšnys: 120 mm, bendras aukštis: 1 820 mm, bendras plotis: 1 780 mm, bendras ilgis: 1 400 mm, stalo plotis: 500 mm, stalo ilgis: 900 mm, ruošinio svoris (maks.): 190 kg, atstumas nuo stalo iki veleno centro: 390 mm, Įranga: dokumentacija / vadovas, Table surface (tilting table): 900 x 500 mm Maximum workpiece weight: 190 kg Travel X: 600 mm Travel Y: 450 mm Travel Z: 380 mm Quill stroke Z1: 120 mm Spindle speed range: 40 - 2000 rpm Number of gear steps: 18 Cjdpfxshu Rwfj Aahjgp Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1,560 kg Including comprehensive standard accessories, such as: Work area enclosure 3-axis digital readout CONTUR Hydraulic tool clamping system for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, including hydraulic unit Monitored spindle guard 3 conventional handwheels Complete electrical equipment for 400 V, 50 Hz three-phase current Ball screw drives for X, Y, and Z axes Vertical milling head Fixed tilting table 900 x 500 mm clamping surface Swivel device for vertical milling head LED machine lamp Protective bellows for vertical and horizontal guideways Automatic central lubrication for the axes and ball screw drives Coolant system with pump Set of 4 mounting elements Including tool holder package consisting of: 1 x ER40 collet chuck 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: XZ 10480, sukimosi greitis (maks.): 3 500 aps./min, Veikianti mašina / 400 FCRO 32 mm / Cgedpfow Iwaiox Aahsp Pjovimo staklės putplasčio pramonei, Tipas Panda 400, M80, 1,9 kW, Pagaminimo metai 2014, Pjūklo diskas 400 mm, Bendri matmenys 1155 x 100 x 140 cm (su ritininiais stalais), Matmenys be ritininių stalų: 71 x 100 x 140 cm.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 400 mm, veleno greitis (maks.): 4 500 aps./min, veleno greitis (min.): 50 aps./min, Offered for sale is a machining center from Deckel Maho, model DMU 50 M, featuring linear control and manual rotary axes. The machine is in excellent condition, fully functional, and ready for immediate use. Of particular note is the ability to operate with an open enclosure. Technical Data: - Year of manufacture: 2002 Cgodpsu Unh Iefx Aahop - Control system: Heidenhain TNC 124 - X-axis travel: 500 mm - Y-axis travel: 400 mm - Z-axis travel: 400 mm - Feed rate: 5,000 mm/min - Rapid traverse: 5 m/min - Tool holder: SK 40 - Clamping surface: Ø 700 x 500 mm - Rotary range: 360° (mechanical) - Swivel range: +90° / -15° (mechanical) - Max. load: 200 kg - Required space: 4,000 x 3,500 x 2,518 mm - Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm - Weight: 2,600 kg Additional tool holders available on request. Transport and loading can be organized Europe-wide for an additional fee if required. All prices are net plus VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.