Tekinimo staklės

Bernardo Master 410 Pro

Būklė: naujas, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical speed ranges: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Cross feeds X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral pitch threads: (32) 7.5 - 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Djdpfsir Igwjx Affski Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance certificate according to DIN - Precise, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric brake system (V models) - Torsion-resistant machine beds made from MEEHANITE quality cast iron, stress-relieved and heavily ribbed for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Impulse pushbutton for main spindle - CE / IEC and German documentation and service Standard equipment (included accessories): - Machine stand with splash guard rear wall - 3-jaw chuck - 4-position toolpost - Foot pedal with mechanical brake - Coolant system - Chuck and spindle guard compliant with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MK3 - 1 test certificate - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tools Available options for this lathe: - 3-axis digital readout - Quick-change toolpost system Multifix Also available as a geared version

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Lamina System Fully automatic laminator FA 1416. Machine with no mileage, in very good technical condition, after total renovation. Machine in motion. It laminates both closed and open cardboard. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top sheet: 130 - 450 gm / m2; Bottom sheet: from 250 g / m2, thickness: 0.6 - 10 mm Dedpowz Ev Tofx Affski Automatic substrate feeder with continuous sheet feeding Automatic top sheet feeder The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 3.7 m, length - 10.5 m, height 2.9 m Fitting accuracy

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: LZ280/3, sukimosi skersmuo virš skersinio stumduko: 190 mm, veleno skylė: 43 mm, tekėjimo skersmuo: 330 mm, tekinimo skersmuo virš slankiojančio stalo: 330 mm, centro aukštis: 165 mm, tekėjimo ilgis: 670 mm, plunksnos brūkšnys: 90 mm, quill skersmuo: 45 mm, veleno greitis (maks.): 4 000 aps./min, veleno greitis (min.): 30 aps./min, GDW Precision Lathe LZ 330 V EconomyLine The LZ 330 V EconomyLine is a powerful lead and feed screw lathe featuring stepless speed control from 30–4000 rpm. The standard finish includes RAL 7035 (light grey) for the enclosure and RAL 7016 (anthracite grey) for the base, splash guard hood, and chuck guard. Features & Accessories: ✅ 3-axis position indicator with 6" colour display ✅ Multifix A quick-change tool post including 1 turning tool holder ✅ Coolant system & central lubrication Dsdpfx Afjv Dan Djfoki ✅ Chip tray, splash guard hood & spindle brake ✅ LED machine lamp & collet rack K32 ✅ Electromechanical limit stop for threading/feeds ✅ Tool cabinet with telescopic pull-outs including operating tools Optional equipment package: ➕ 160 mm 3-jaw chuck (up to 4,600 rpm) ➕ Keyless drill chuck (3-16 mm, B16/MK3) ➕ Revolving centre MK3 & boring bar holder ➕ 4 additional turning tool holders & 1 boring bar holder 📦 Delivery: ✔️ Disposable packaging & secure transport including insurance Perfect for precise and demanding turning operations in industry & trade! 🚀

Būklė: geras (naudotas), Gamybos metai: 1995, CNC ciklinis tekinimo staklės MONFORTS KNC 6, pagaminta 1995 m., valdymas Monforts MTC K. Centrinis atstumas: 2000 mm. Maksimalus tekinimo skersmuo virš lovos: 630 mm. Maksimalus tekinimo skersmuo virš skersinio slydiklio: 380 mm. Veleno sūkiai: 2–1800 aps./min. Veleno variklis: 21/15 kW. Veleno skylė: 71 mm. Trijų žandikaulių FORKARDT 400 mm griebtuvas. Įrankių laikiklis Multifix C dydžio su 3 įrankinėmis. Matmenys: ilgis 4000 mm, plotis 2200 mm, aukštis 1900 mm. Svoris apie 5000 kg. Yra visa mašinos dokumentacija. Įrenginį galima demonstruoti prijungus prie tinklo. Dkodpfehktd Nox Affei

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 280 mm, veleno skylė: 58 mm, tekinimo skersmuo virš slankiojančio stalo: 470 mm, centro aukštis: 235 mm, tekėjimo ilgis: 1 000 mm, plunksnos brūkšnys: 127 mm, quill skersmuo: 68 mm, bendras ilgis: 2 150 mm, bendras plotis: 810 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 20 aps./min, lovos plotis: 300 mm, bendras svoris: 1 800 kg, quillo laikiklis: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the cross and compound slides Manual central lubrication with a pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Dkedscirnijpfx Affsi Chuck guard Control bar with 3 adjustable cams Machine lamp Fixed live centre Set of machine levelling plates

Būklė: naudotas, Gamybos metai: 2005, The Sakurai 466 SIP, year of manufacture 2005, serial number HF113105, is a four-color offset printing press with a maximum sheet size of 470 x 660 mm and a total print output of 25 million impressions. The machine is currently in operation at a print shop in Germany and features the DTC Delivery Top Console with touchscreen and full remote control. It includes advanced automation systems such as SIS (Sakurai Interactive System) for print preparation, SAS (Sakurai Auto Set) for paper size and thickness adjustment, and SPC (semi-automatic plate change), as well as a plate lateral register system and a tension register for precise alignment. The machine is equipped with automatic wash-up devices for blanket cylinders and ink rollers, an Olivermatic dampening system, and a Baldwin refrigeration and BAL control system to ensure consistent print quality. The feeder is equipped with a suction belt feeder table with electronic double sheet and side lay detection, while the chrome-plated impression cylinders provide greater durability and performance. The machine also includes a perfecting unit for 4/0 or 2/2 printing with full automation, medium pile delivery, and a powder spray system. The delivery scope includes a plate punch, compressor, tools, and manuals, making the Sakurai 466 SIP a comprehensive and well-equipped solution for high-quality and efficient offset production. Format: 470 x 660 mm Equipment: - DTC Console (Sakurai Delivery Top Console) with touchscreen. Full remote control: - SIS (Sakurai Inter Active System) for prepress setup - Plate lateral register system - SAS (Sakurai Auto Set) for paper size and thickness - SPC (semi-automatic plate change) - Tension register - Automatic wash-up devices: Blanket cylinders & ink rollers - Olivermatic dampening - Baldwin refrigeration & BAL control - Feeder with suction belt feed table - Electronic double sheet and side lay detector - Chrome-plated impression cylinders - Perfecting (4/0 - 2/2, fully automatic) - Mid-level pile delivery - Powder spray system Including: Plate punch, compressor, tools, and manuals Dkjdpfoxa Eamjx Affsi

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 550 mm, tekinimo skersmuo virš slankiojančio stalo: 1 550 mm, tekinimo skersmuo virš viršutinio vežimo: 1 220 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 600 mm, bendras aukštis: 1 600 mm, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance conditions of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Availability: Overhaul on order, delivery time 3.5 months from order confirmation. Technical specifications: - Distance between centers/turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 Djdpfx Aev Ab Dqoffski - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Overall weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes with display, including installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post - Full-length rear safety guard - Inverter including soft-start function and potentiometer for stepless speed control

Būklė: naujas, Gamybos metai: 2025, Siebdruck-Belichtungsgerät: UV-LED von MTP, Modell S-LED 4000 (neu) Maschine zur Vorbereitung von Siebdruckschablonen – robust und zuverlässig. Einfache Bedienung, geringer Energieverbrauch. LED-Quelle: 400 W Schnelle Vakuumpumpe (20/30 Sek. zur Vakuumerzeugung) Maximale Rahmen-/Schablonengröße: 83 cm x 63 cm Digitaler Timer für Vakuum- und Belichtungszeit Geliefert mit Gestell (zum Selbstaufbau) Sehr einfache Handhabung, Belichtungszeit 1 bis 2 Minuten UV-LED-Belichtungsrahmen, Vakuumpumpe inklusive. Dksdpfx Aelgvlroffei Gestell ist im Lieferumfang enthalten. Preis: 2.390 € zzgl. MwSt. – Lieferung nicht inbegriffen 1 Jahr Garantie. VERFÜGBAR AB MÄRZ 2025 Siebdruck, Siebdruckwerkstatt, Siebdruckfarbe, Siebdruckkunst, Siebdruckrahmen, Siebdruckkurs, Siebdruckzubehör, Siebdruckgerät, Siebdruck-Belichtungsgerät, Siebdruck Bordeaux, Siebdruck-Typon, Siebdruckerei, Siebdruckmaschine, Industrieller Siebdruck, Siebdruckmaschine, Siebdruck Zuhause, Siebdruckunternehmen, Siebdruckdrucker, Siebdruck auf Holz, Siebdruckmalerei, Handwerklicher Siebdruck, Künstlersiebdruck, Technischer Siebdruck, Typondrucker für Siebdruck, Textiler Siebdruck, Siebdruckspachtel, Manueller Siebdruckkarussell, Filmdrucker für Siebdruck, Automatische Siebdruckmaschine, Textilsiebdruckmaschine, Siebdruck-Gebrauchtgeräte. Textiltinte, Lösemittelreiniger, Fotoemulsion, Siebdruckemulsion, Emulsionen zur Siebbeschichtung, Textile Emulsion, Diazo-Emulsion für wasserbasierte Farben, Hochwertige Siebdruckemulsion für Wasser- und Plastisolfarben, Produkte zur Schablonenherstellung. Siebdruck-Belichtungseinheit, Emulsion, Belichtrahmen, Vakuum-Belichtungseinheit, Belichtungsrahmen. UV-Belichtungseinheit, Belichtungseinheit, Belichtungstisch, UV-Belichtungseinheit für Siebdruck, UV-Siebdruck-Belichtungslicht. Siebdruck-Belichtungseinheit, Cyanotypie-Belichtungseinheit, UV-LED-Belichtungseinheit, Siebdruck-Belichtungsset, Siebdruckrahmenherstellung.

Būklė: geras (naudotas), Gamybos metai: 1998, Battenfeld 600/200 CDC Unilog 4000 Dedpfx Afeg Emvhefjki Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight approx. 90 g

Būklė: naujas, Table length: 1300 mm Table width: 800 mm Lifting height: 1010 mm Load capacity: 1000 kg Minimum lifting height: 190 mm Connection voltage: 380 V Total power requirement: 0.75 kW Machine weight approx.: 0.22 t Space requirement approx.: 1.3 x 0.8 x 0.2 m Dsdpfxofrztxo Affoki The hydraulic lift tables are electrically driven and operated. Equipped with a safety contact strip for secure lowering operations. Highly versatile for use in workshops, assembly departments, loading bays, and more.