Gręžimo staklės

Bernardo GB 32 STI

Būklė: naudotas, Gamybos metai: 1991, Drilling capacity in steel (diameter) 50 mm Outreach 1100 mm Workpiece height - max. approx. 1000 mm Drilling capacity in cast iron 60 mm Spindle taper MK 5 Spindle speeds 28 - 2500 rpm Kjdpfou Sblwox An Uonb Feeds 0.05 - 2 mm/rev Quill stroke 300 mm Distance base plate - spindle nose 630 - 1380 mm Vertical arm adjustment 750 mm Total power requirement 6 kW Machine weight approx. 4 t Machine dimensions L x W x H 2,740 x 1,140 x 2,590 mm - with tapping unit - Accessories: Cube table LxWxH = 550 x 550 x 550 mm, machine vice, coolant system

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP4M with 3-axis Heidenhain Active digital readout – Excellent condition, CE compliant! Technical Data: >> Year of manufacture: 1992, Machine No. 2203-8449 >> Rigid angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels (X/Y/Z): 500 / 400 / 400 mm Kjdpfxsu Tuk Hs An Ujnb >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill - SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1,600 kg Accessories and Equipment: >> 3-axis active digital readout by Heidenhain >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Active universal milling machine in excellent condition. The machine has minimal backlash and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine features hydraulic clamping. The FP4M has only been used occasionally in a governmental training facility. On this newer FP4 model, the feed rate is steplessly adjustable in all three axes, and there is rapid traverse available for each axis. A major advantage is the Heidenhain 3-axis active digital readout. With this Heidenhain position control, you can input dimensions which the machine then automatically moves to. An oil change has been performed; mechanically and electrically inspected. The Heidenhain digital readout system makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Būklė: geras (naudotas), Gamybos metai: 1992, Offer 23426 Technical data: - Cutting capacity at 90° round: 420 mm - Cutting capacity at 90° flat: 635 x 290 mm - Cutting capacity at 45° round: 360 mm - Cutting capacity at 45° flat: 420 x 300 mm - Saw blade dimensions: 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds: 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vice - Cutting pressure continuously adjustable: 0 – 10 m/min Knodpfxerl Irvo An Usb - Total drive power: 400 V / 2.2 kW - Coolant system - Machine is mounted on a swiveling chassis - Powered infeed roller conveyor: 4000 mm - Outfeed roller conveyor with length stop: 6000 mm - Space requirement: approx. W 2500 x H 1400 x D 1100 mm - Machine weight: approx. 950 kg - Roller conveyor weight: 2000 kg

Būklė: naujas, Gamybos metai: 2025, Lengvai prižiūrima dulkių šalinimo sistema, specialiai sukurta agresyvioms smėliavimo dulkėms, su prieškamera ir smūginiu atskirtuvu, visiškai sudaryta iš šių pagrindinių sudedamųjų dalių: a) 1 vnt. kasetinis sausas filtras, tipas PF 2.16.B250, našumas 30 000 m³/val. (galimi ir kiti dydžiai), sudarytas iš tvirtos 3 mm storio plieno lakšto korpuso, padalyto į žaliavų dujų erdvę su filtro kasetėmis, filtruojančią prieškamerę su smūginiu atskirtuvu ir išvalytų dujų zoną su filtro valymu slėginiu oru, kiekviena dalis su atskirų priežiūros durų sistema Easy Open. Dulkių surinkimo piltuvas su plyšiniu vožtuvu arba ląsteline oro užrakto jungtimi dulkėms šalinti, naudojant Big Bag maišus. Magnetinio vožtuvo valdymas su diferencialinio slėgio indikatoriumi optimaliai filtro kasetės valymo reguliavimui. Priežiūros durys – suveriamos, lengva priežiūra. Knsdpjdrtalsfx An Ujb

Būklė: naudotas, Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 800 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 2 000 mm, stalo apkrova: 5 000 kg, ašies skersmuo: 110 mm, bendras aukštis: 3 800 mm, bendras ilgis: 5 000 mm, bendras plotis: 3 000 mm, stalo ilgis: 1 520 mm, stalo plotis: 1 225 mm, padavimo ilgis X ašis: 1 800 mm, padavimo eiga Y ašimi: 1 500 mm, padavimo ilgis Z ašis: 2 000 mm, Įrankio laikiklis SK50, Heidenhain valdymas, staklės paruoštos atsiėmimui ir iškart naudojimui. Knedpfxsxga Tns An Uob

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) Kjdew U N Ixjpfx An Uonb - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 50 h, Funkcionalumas: visiškai funkcionalus, For sale is a welding robot system with the following components: Elite Robot CS620 (1750 mm reach) with programming flange and software Fronius TPSi 500 rotateZERO 500 positioner with 1800 mm x 800 mm intermediate frame Machine base frame Ksdpfev Dvlljx An Ujnb The system is ready for immediate welding operation.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2023, Šis CLOOS Instant pro IRPS buvo pagamintas 2023 m. Jame sumontuotas QIROX suvirinimo robotas, kurio didžiausia naudingoji apkrova yra 10 kg, o darbinis diapazonas - Ø 3900 mm. Jame įrengta pažangi QC 2 valdymo sistema, programavimo rankinis įrenginys ir palaikomi nauji tandeminiai vedimo / vilkimo procesai. Jis idealiai tinka aukštos kokybės suvirinimo darbams, taip pat turi išsamų suvirinimo ir jutiklių technologijų rinkinį. Susisiekite su mumis ir gaukite daugiau informacijos apie šį aparatą. Mašinos privalumai Techninės mašinos privalumai Kodpjyaimlofx An Uonb • Darbinis diapazonas: Ø 3900 mm • Nešiojamojo įrenginio programavimas jutikliniu ekranu • Qirox technologijos sąsaja • Įrankių valdikliai ctms • Tcp matavimo prietaisas Papildoma informacija Suvirinimo technologija Maitinimo šaltinis Lanko jutiklis Vandens aušinimo modulis Valdymo modulis Vielos pavaros įrenginys Robotinis suvirinimo degiklis Programinė įranga Parametrų šlifavimas Nuo atstumo priklausantis perėjimas tarp parametrų sąrašų Daugiasluoksnė technologija Programuojamos švytuoklės figūros Programinės įrangos kalba: vokiečių IRPS skaitytuvo valdymas IPC „Rittal“ valdymo spintelė Jutiklinis ekranas Skaitytuvo sąsaja Nepertraukiamo maitinimo šaltinis Skenavimo plotis: 1000 mm, kai gaminio aukštis 500 mm Skenavimo greitis: nuo 300 iki 1000 mm/sek. Degiklio valymo įrenginys Degiklio valymo įrenginys Suslėgto oro stiprintuvas Vielos pjaustytuvas Valdymo blokas Skaitmeniniai įėjimai / išėjimai: 16 Nuoseklioji sąsaja Kompiuterio jungtis: QIROX valdiklis CAN magistralė USB sąsajos: 2 „Flash“ atmintis: 8 GB Buferinis modulis: 24 V Taškų redaktorius Išplečiama iki 16 ašių

Būklė: naudotas, Funkcionalumas: ribota funkcionalumas, 1. Surface planer – shaft width: 260 mm – table length: 1560 mm 2. Thickness planer – maximum workpiece height: 180 mm 3. Drill Kedpfx Anoqwg Efs Usnb – max tool diameter: 18 mm – drilling depth: 80 mm – drilling width: 140 mm – table adjustable up/down, front/back and sideways 4. Circular saw – SAW BLADE MISSING 5. Spindle moulder – spindle diameter: 30 mm – adjustable spindle CONDITION AND COMPLETENESS AS SHOWN IN THE PHOTOS

Gamybos metai: 2022, būklė: naujas, Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granulate, etc. Knodeilg U Espfx An Ueb Aluminium angled conveyor belt including substructure Horizontal section: 2,500 mm (customizable) Inclined section: 4,000 mm (customizable) Angle at the bend is freely and infinitely adjustable Feed height: horizontal (customizable) Discharge height: individually adjustable Design: height-adjustable (mobile) Conveyor belt width: 600 mm (customizable) We supply our conveyor belts in PVC, PU, felt, or rubber. PU conveyor belt including cleats and wave edge Drive: 1.1 kW motor (customizable), speed approx. 0.3 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and components ready for connection, motor control optional 8x adjustable machine feet for leveling Wave edge: 50x30 mm T-40 cleats with 300 mm spacing 2-ply for enhanced cross stability We always have various systems of this type in stock. The delivery time for a custom-made system is currently around 2–3 weeks, depending on manufacturing effort. Our core competence is to provide customers exactly what they really need. We work with our customers to develop tailor-made, individual solutions and supply suitable systems from our own production. Feel free to contact us by phone to find the right solution for your application. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator.