Mobilus strėlinis kranas, tiltiniai kranai, kilnojamas kranas, mobilus kranas, montavimo kranas

AUSTEN HVR 05

Sąlyga: paruoštas naudoti (naudotas), keliamoji galia: 32 000 kg, tuščias svoris: 38 000 kg, kėlimo aukštis: 12 200 mm, Demag DH hoist with digital scale Width: 6008 mm Main girder height: 1500 mm Hoist height above the beam: 1210 mm Type: overhead travelling crane Span: 25 meters Hoisting speed: 6.3 / 12.6 m/min Ledpsv Sfrwsfx Ah Tshp Trolley (cross travel) speed: 10 / 34 m/min Crane travelling speed: 10 / 100 m/min Number of girders: double girder

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: et50-neu-löwa, 50m³ underground earth tank (cistern), brand new, manufactured according to DIN-EN 12285-1, single-walled, raw interior, exterior professionally insulated. Dimensions: Diameter = 2.50 m, Length = approx. 10.70 m The tank is equipped with a manhole DN 600 including dome cover, bolts, and gasket. On request, the tank can be fully fitted with a fire water suction connection, making the tank compliant with DIN 14230: underground fire water tanks. Lodpfjd Tmaqjx Ah Tshp Fire water suction connection / suction line made of stainless steel V2A – according to DIN 14230 – consisting of: - 1 pcs suction line DN125, stainless steel V2A, with Storz A fixed coupling and Storz A blind coupling - 1 pcs vent pipe DN100 with hood, stainless steel V2A - 1 pcs anti-whirl plate mounted on suction line - 1 pcs warning sign "Fire water extraction point" - 1 pcs dip pipe with gauge rod for level measurement - 1 pcs dome cover with bolts and gasket The suction line can be used both for filling and extraction. All components are pre-assembled and ready for installation ex works. If required/desired: Installation of an above-ground fire water suction connection according to DIN 14244 - Form B, incl. A fixed coupling to DIN 14319 and A cover cap to DIN 14319. Housing made of cast iron with external epoxy resin coating. If desired: Complete sandblasting of the interior and coating for service/fire water. Tank available ex works, loaded free of charge. General information: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Other tanks (new and used) as well as rental systems are also available! In addition, we purchase existing tank facilities, and can professionally empty, clean, dismantle, and transport them, certified according to the Water Resources Act (§ 62 WHG).

Sąlyga: naujas, Gamybos metai: 2025, THE HIGH-PERFORMANCE MOBILE BENDING MACHINE: The compact, mobile design enables precise and repeatable bending both stationary and directly at the assembly site, up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide robust drive force. The motor speed is automatically adjusted, resulting in rapid return motion and shorter cycle times. Position detection directly on the bending axis ensures optimal bending accuracy and extremely high repeatability. The bending angle can be set to 0.5° simply and quickly via push buttons. A large LCD display shows the angles clearly. The ability to store up to three bending angles allows efficient bending of tubes with different bending results. For transport, the compact unit with accessories can be safely and neatly stored in sturdy transport cases. The “stationary tube and rotating tool” principle ensures a minimal footprint during bending. Sliding shoes are used for thin-walled tubes to ensure wrinkle-free bends and to achieve arcs with minimal deformation, for example, in stainless steel and copper tubes. Using the PB20 profile bending attachment, flat, square, and round bar stock can be bent with ease. POTENTIAL APPLICATION AREAS: • Hydraulic piping • Prototyping • Plumbing and heating installation • Technical data: • Bending capacity: Ø 6 to 35 mm, CU Ø 42 mm, depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation is possible • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency converter and three-phase motor • 3 programmable bending angles OPTIONAL ACCESSORIES: Lhodponfvx Nofx Ah Tep • Sliding shoe holder • Double roller mount • PB20 profile bender – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod base • Machine case • Tool case • Mini bending device KBV • Special tools as required OUR SERVICE: • Welcome for test production in our in-house demo room • On-site consultation and information session • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your location

Sąlyga: geras (naudotas), Parduodamas konteinerių komplektas, susidedantis iš 3 vnt. 20 pėdų konteinerių. Konteineriai yra izoliuoti biuro arba gyvenamieji konteineriai, kiekvienas su vienvėrėmis įėjimo durimis ir antrų durų su vėjo apsauga viename gale, taip pat dviem atverčiamais ir atlenkiamais langais kitame konteinerio gale. Pilnai paruošti naudojimui - su elektros instaliacija (įskaitant saugiklių dėžutę), įvairiomis elektros rozetėmis, apšvietimu ir elektriniais radiatoriais. Konteineriai anksčiau naudoti kaip gyvenamieji, yra geros būklės ir sandarūs. Įrengti su 400 voltų išoriniu pajungimu (galimas ir pravedimas toliau). Kaina galioja už 3 konteinerius perkant komplektą. Pageidaujant konteinerius galima transportuoti ir pastatyti pageidaujamoje vietoje naudojant esamą kraną ant transporto priemonės. Papildomų paslaugų kainos priklauso nuo atstumo ir turi būti iš anksto suderintos. Ledpfxjh Hx Nho Ah Tehp

Sąlyga: geras (naudotas), Gamybos metai: 1995, mašinos/transporto priemonės numeris: 9518 202-5, Offer 24361 Technical Specifications: - 3 individually motor-driven rolls, manual and controlled operation - Max. torque per roll: 1,600 Nm - Stroke of bending roll X-axis approx.: 265 mm - Bottom rolls laterally adjustable: 200 – 1,000 mm - Shaft diameter: 105 mm - Roll diameter up to approx.: 260 mm - Usable length of standard shafts approx.: 300 mm - Infinitely variable shaft rotation: 1 – 22 rpm Lhodpfxet Nfv To Ah Tsp - Bending capacity, e.g.: - Round pipe 1" Ø: 350 mm - Round pipe 4" Ø: 2,000 mm - Flat steel 300 x 15 Ø: 600 mm - Roll drive: 400 V / 3 x 1.1 kW - Hydraulic drive: 400 V / 3 kW - Weight approx.: 1,200 kg - Weight accessories approx.: kg - Required space approx.: W 1,250 x H 1,400 x D 1,700 mm Includes: - PC 100 control unit in separate control panel - Lateral straightening rolls adjustable horizontally and vertically - Standard bending set for flat and angle material - Roll sets for steel and plastic pipes

Sąlyga: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left Lodpfong A R Ssx Ah Tjhp • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Sąlyga: naujas, Gamybos metai: 2025, Exhibition unit immediately available: New Kaeser SK 25 T - 10 bar screw compressor with integrated refrigeration dryer Pressure: 10 bar Rated power: 15 kW Free air delivery: 2.11 m³/min Sound level: 67 dB(A) Ledjdrc Txepfx Ah Tehp Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 h Attractive leasing options for new machines via our partner bank available. Visit our showroom. We always have a wide selection of new and used compressors in stock!

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), A Boy injection moulding machine is available. Clamping force: 100 kN, tie bar spacing (diagonal): 205 mm, maximum platen opening: 250 mm, ejector stroke: 50 mm, screw diameter: 14 mm, shot volume range: 1 cm³ / 15.3 cm³, machine dimensions (L/W/H): approx. 1500 mm / 550 mm / 1400 mm, weight: approx. 500 kg, control system: Procan ALPHA. Documentation is available. On-site inspection is possible. Lhedpfx Asv Ext Ish Tjp

Sąlyga: paruoštas naudoti (naudotas), Load capacity: 5,000 kg. Lhjdpfxst H Rfbs Ah Tep

Sąlyga: paruoštas naudoti (naudotas), apie 11 vnt. = 44 einamieji metrai Laidų/polių skaičius: 4 Lhedpfx Ahed Hapke Tsp Standartiniai ilgiai: 4000 mm Tinklo įtampai iki: 500 V Srovės juostos skerspjūvis: 10 mm² Svoris: 2 kg/m Leistina apkrova prie 100% darbo ciklo: 60 A