Indukcinis rūšiuotuvas

ATM Recyclingsystems NES Stainless Steel inductive sorter

Gamybos metai: 2025, būklė: naujas, Ultraschallbad UEC 300 ist eine Industrielösung zur Reinigung großer und schwerer, stark verschmutzter Teile. Die Maschine verfügt über einen pneumatischen Hub mit einer Tragkraft von 200 kg. Die Arbeitsfrequenz beträgt 28 kHz mit Sweep-Technologie. Das Gerät besteht aus einem Haupt-Ultraschallbad mit drei seitlichen Ultraschall-Piezowandlern sowie einem zweiten, darüberliegenden Bad mit Ölabscheider. Die Steuerung erfolgt über ein hochwertiges Touchscreen-HMI mit 3D-Anzeigen. Das komplette Bad ist aus säurebeständigem Edelstahl AISI304 mit einer Materialstärke von 2 mm gefertigt. Fgedpfx Afogd Uifedsc --- Technische Daten : Plattformgröße: 900 x 570 mm Maximale Traglast: 200 kg Nutzbare Höhe: 400 mm Ultraschallleistung: 3 kW (6 kW p-p) Ultraschallfrequenz: 28 kHz mit Sweep-Modus Heizleistung: 9 kW Ausstattung : 7" Touchscreen mit 3D-Benachrichtigungen Automatisches Wassernachfüllsystem Automatischer Liftbetrieb Füllstandssensor Hubpositionssensoren Deckelsensor Garantie: 2 Jahre WEITERE MODELLE AUF LAGER VERFÜGBAR

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25-029, bendras plotis: 800 mm, bendras ilgis: 4 700 mm, bendras aukštis: 1 900 mm, įvesties srovės tipas: trifazis, energijos suvartojimas: 2 kWh, Very good metal separator for separating all metals (including stainless steel, V2A) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approximately 1 mm particle size. Suitable for metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately operational, can be inspected and tested. Camera option available upon request! If the machine is too small, we can also manufacture larger models. This is our demonstration machine. Maximum throughput depends on material and application. Price negotiable! Fjdjqabm Ejpfx Afdsgc

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Parduodama kliento užsakymu. 2008 m. mūsų pilnai renovuota ir pristatyta, eksploatuota iki 2024 m. Gamyklinis naujas AirTen rotorius, naudotas tik trumpą laiką. Į kainą įskaičiuoti įvairūs atsarginiai dalys ir pilna dokumentacija. Komplekte yra įkrovimo ir iškrovimo transporteriai bei rėmas. Fgjdpfjxnz Rkox Afdjc

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, paskutinio kapitalinio remonto metai: 2025, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame Fgsdjvf E Avopfx Afdjc - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: naujas, Klanke Supercut roll slitter for efficient shredding of reject rolls. Features: - Automatic safety interlock - Emergency stop pull cord - Siemens PLC Technical specifications: Blade length: 3000 mm Cutting channel opening: 1200 mm Motor power: 15 kW Cutting force: 50 t Fgjdpfx Afsn I Rgpedec Made to order. Price and further information available on request. We will be happy to provide you with a non-binding offer.

Būklė: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Cambio 500 debarking plant consisting of: Infeed centering system. Cambio 500: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Discharge control unit. Tilting trough for long timber. Spare parts. Fedpfxewxdimj Afdjgc

Būklė: naudotas, Gamybos metai: 1995, Used van Aarsen C750 Pellet Mill / Pellet Press Including feed auger, mixer, 160kW IE3 WEG motor (alternative motor upon request) Automatic roller adjustment Internal components overhauled 2-3 years ago Including rollers & subframe Fodpfx Afjv Skriodjgc Including tools for roller and die change

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 5 kW (6,80 AG), kuro tipas: elektrinis, tuščias svoris: 4 200 kg, Gamybos metai: 2024, feed bunker with bunker chute Fedpjuqynmofx Afdogc bunker capacity 10.5 m³ S355 / St52-3 vibrating chute with 10 mm Hardox 450 wear plate chute fully stress-relieved annealed 2 x 2.5 kW unbalanced motors NEW

Būklė: geras (naudotas), Radio-controlled quick-clamping carriage, fully hydraulic, with hydraulic auxiliary carriage. Track gauge 840 mm. Control panel and electrical switch cabinet. Fodpfx Afed Nqrqedogc

Būklė: naujas, Gamybos metai: 2021, For sale is a new Nicholson A6/35" 5-arm machine with roller drive. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Fgsdowt T Unjpfx Afdsc