Suolelio gręžtuvas

ALZMETALL Alzstar 18-T/S

Būklė: naujas, ALZMETALL Alzstar 18-T/S, Manufacturer: Alzmetall Model: Alzstar 18-T/S Condition: New Drilling capacity in steel (St 60): 18 mm Tapping capacity in steel (St 60): M 12 Tapping capacity in cast iron (GG 20): M 14 Short spindle: MT 2 Spindle speed: 225–4,300 rpm Spindle stroke: 80 mm Hsdpfxsy S Au Us Ahgsp Throat depth: 190 mm Column diameter: 65 mm Machine table usable area: 300 x 240 mm T-slots (number - width - spacing): 2 x 12 x 80 mm Distance spindle to machine table (min./max.): 75 / 357 mm Machine baseplate usable area: 300 x 240 mm T-slots (number - width - spacing): 2 x 12 x 80 mm Distance spindle to baseplate (min./max.): 437 / 437 mm Manual feed Machine table height adjustment: Hand crank Total power requirement: 0.37 / 0.55 kW Machine height: 840 mm Weight: 110 kg Standard equipment: - Main switch with lockable motor protection switch - Reversing switch for clockwise/counterclockwise rotation - Infinitely variable speed adjustment - Protection class IP 54 - Mushroom-head emergency stop (latching) - Spindle guard with electrical interlock Optional: - LED machine light - Cabinet stand - Drill chuck 1–13 or 3–16 mm Available immediately. Self-collection possible. Forklift on site. Shipping also possible. Errors, changes, and prior sale excepted. A wide range of Alzmetall bench and pillar drilling machines in stock!

Būklė: naujas, Precise, low-vibration standard drill press, offering high accuracy and quality. The drill table is adjustable via rack and can be swiveled around the column. Features a fully protected motor and star handle. Power supply: 230 V. Continuous drilling capacity in steel (St 60): 15 mm Standard drilling capacity: 18 mm Hedpfx Asda Nqxshgjp Infinitely variable spindle speeds: 200 - 4,000 rpm Spindle taper: MK 2 Drilling depth: 80 mm Throat depth: 180 mm Distance spindle/table: up to 380 mm Table size: 250 x 220 mm Column diameter: 65 mm Overall height: 910 mm Weight: 80 kg Three-phase motor, frequency regulated: 1.1 kW Equipment: - Forward/reverse switch for thread cutting - Full motor protection - Star handle In stock, immediately available

Būklė: naujas, Drilling capacity in steel (diameter): 18.0 mm Throat depth: 190 mm Drilling stroke: 80 mm Morse taper: 2, short spindle MT Speed range: 225 – 4,300 rpm Operating voltage: 400 V / 50 Hz Table size: 300 x 240 mm Column diameter: 65 mm Motor power: 0.37 / 0.55 kW Weight: 110 kg Equipment/features: - Wide spindle speed range - Infinitely variable speed adjustment - Machined base plate Hjdoxaay Uopfx Ahgop - Electrically secured spindle guard - Main switch with lockable motor protection switch - Reversing switch for clockwise and counter-clockwise rotation - Operating manual in German

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: PRJ069841, ALZMETALL Bench Drilling Machine, Drilling Capacity in Steel: 14mm Short Spindle MK2, Spindle Stroke: 80mm, Throat Depth: 190mm, Column Diameter: 65mm, Machine Table Usable Area: 300x240mm, with T-slots 2 x 12mm x 80mm, Spindle-to-Table Distance min./max. 75/357mm, Machine Table Height Adjustment via Hand Crank, Machine Base Plate Usable Area: 300x240mm, with T-slots 2 x 12mm x 80mm, Spindle-to-Base Plate Distance min./max. 437/437mm, Manual Feed, Machine Height without Options: 825mm, Net Weight: 83kg. - Infinitely variable speed: 230-4000 rpm Hodpfxolub Hts Ahgjp Standard Features: 5" TFT LCD Touch Display: Manual Input for Target Spindle Speed, Actual Speed Display, Integrated Drill Depth Display with Touch Zero-Point Transfer, Virtual Drilling Depth Scale in Display, Machine Status and Warning Indicators in Display, Service Information, Selectable Operating Languages DE/EN/FR/ES/IT/NL/RU AC Motor 230 Volt, 50 Hz, Plug Preassembled, Cable Length 2m, Three Separate Buttons for Forward - Reverse - Stop, Spindle Holding by Braking Function, Spindle Guard with Electrical Interlock, Main Switch Lockable, Mushroom Push Button (latching) for EMERGENCY STOP, Infinitely Variable Speed Adjustment via Potentiometer, Protection Class IP54, Spindle Guard with Electrical Interlock, Finish: DD Structured Paint Signal White RAL 9003, PANTONE 7545c, Black Delivery time: ex stock Waiblingen Beinstein

Būklė: naujas, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Weight: 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench features an interchangeable, robust tabletop that accommodates all TM fixture components with a bore diameter of approximately 1.6 cm. This allows you to create the ultimate, high-performance, compact mobile workstation. Expand your clamping and positioning options and be ready for new projects with the GERD WOLFF Welding Table Workbench + Fixture Set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for clamping and positioning during welding and fabrication. Clamp and position at any point on the reversible, double-sided, precision ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop for accurate setups every time. Technical Specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Tabletop flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8 inch = 1.5875 cm) 2 x Inserta Clamps, suitable for 1.5875 cm holes (UDN5150) 2 x Side Clamps, suitable for 1.5875 cm holes 2 x Inserta Pliers, suitable for 1.5875 cm holes (PTT522K) 2 x Inserta Pliers, suitable for 1.5875 cm holes (PTT634K) 2 x Magnetic V-Pads for the tabletop Hsdjxqrhlopfx Ahgsp 2 x Locating Pins, suitable for 1.5875 cm holes 2 x Angle Brackets, 1.5875 cm holes (T50305) 2 x Angle Brackets, 1.5875 cm holes (T50304) 4 x Stops, suitable for 1.5875 cm holes (T54203) 4 x Stops, suitable for 1.5875 cm holes (T54205) 4 x V-Block Spacers, suitable for 1.5875 cm holes 8 x D-Stop Bars, 1.5875 cm holes 8 x V-Blocks, suitable for 1.5875 cm holes 10 x Ball-Lock Bolts, suitable for 1.5875 cm holes 12 x Magnetic Support Pins

Būklė: naujas, Drilling capacity in steel (diameter): 20 mm Throat depth: 195 mm Drilling stroke: 80 mm Hodpeiiq S Nefx Ahgjp Drill spindle: MT 2 Table clamping surface: 320 x 300 mm Total power requirement: 0.75 kW Machine weight approx.: 0.072 t Space requirement approx.: 0.7 x 0.4 x 1.1 m Robust bench drill with self-tightening drill chuck with adjustable drilling depth stop with zero release with emergency stop rotating table plate

Būklė: beveik kaip naujas (parodų įrenginys), A demonstration double-mitre metal cold circular saw with 350 mm circular saw blade Cutting capacity: Round/Rectangle 90°: 120/140x100 mm Round/Rectangle 45° right and left: 100/100x100 mm Hsdpfx Aepgmngjhgsp Blade speed: 18/36 m/min For further technical data, please refer to the PDF document. Technical data and dimensions subject to change.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP4M with 3-axis Heidenhain Active digital readout – Excellent condition, CE compliant! Technical Data: >> Year of manufacture: 1992, Machine No. 2203-8449 >> Rigid angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travels (X/Y/Z): 500 / 400 / 400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical and horizontal quill - SK40 taper >> Vertical quill extendable by 90 mm >> Hydraulic clamping system >> Weight approx. 1,600 kg Accessories and Equipment: Hodpfx Aheu Tuk Hsgjp >> 3-axis active digital readout by Heidenhain >> Coolant system >> Chip tray >> Centralized electric lubrication >> Operation manual, spare parts diagrams About the machine: Offered here is a Deckel FP4M Active universal milling machine in excellent condition. The machine has minimal backlash and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine features hydraulic clamping. The FP4M has only been used occasionally in a governmental training facility. On this newer FP4 model, the feed rate is steplessly adjustable in all three axes, and there is rapid traverse available for each axis. A major advantage is the Heidenhain 3-axis active digital readout. With this Heidenhain position control, you can input dimensions which the machine then automatically moves to. An oil change has been performed; mechanically and electrically inspected. The Heidenhain digital readout system makes operation easier and even more precise. Take the opportunity to view and test this machine under power on site.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Very Good Condition, CE Certified! Technical Specifications: >> Year of Manufacture: 2006, Machine No. 348013 >> Fixed angular table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed on 3 axes from 0 to 2,000 mm/min >> Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min >> Travel X/Y/Z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical and horizontal quill – SK40 taper >> Hydraulic tool clamping system >> Weight approx. 1,800 kg >> Required space approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Equipment and Accessories: >> Heidenhain TNC 320 CNC control >> Hydraulic clamping vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, control operating manual and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About the Machine: Hjdpswrhxfefx Ahgsp Offered here is a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 CNC control. This universal milling machine is in very good condition. It comes from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. Moreover, the machine features hydraulic clamping both vertically and horizontally. Switching between vertical and horizontal operation is very simple, thanks to the fold-away vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Kunzmann under power at our location.

Būklė: geras (naudotas), Vice, bench vice, engineer’s vice, parallel vice, heavy-duty vice - Parallel vice: Jaw width 150 x 30 mm - Clamping width: 235 mm - Dimensions: 490/220/H195 mm - Weight: 26 kg Hodpfxevm U Hte Ahgep