Krano lubos, salės kranas, portalo kranas

ABUS Hallenkran Brückenkran Kran ELV Seilzug 1000Kg 1t - Spur 11250mm

Gamybos metai: 1987, būklė: naudotas, mašinos/transporto priemonės numeris: 001472U, for sale Iaodpfx Aasttax Seusr 1x single-girder overhead crane 13,685 mm span x 2x 2,000 kg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, stalo skersmuo: 430 mm, Kaina už abu įrenginius – parduodami tik komplekte. Gamintojas: STAEHELY SH 500 Priedai: keičiami krumpliaračiai, skersiniai ir viena staklė su tangenciniu frezavimo galvute (žr. nuotraukas)!!!!! Stalo skersmuo = 430 mm Didž. krumpliaračio skersmuo = 500 mm Iodpfx Aaoxfub Dousar Krumpliaračio plotis = 240 mm Modulis = 6

Būklė: geras (naudotas), Gamybos metai: 2018, veikimo valandos: 7 819 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 000 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 720 mm, greitas poslinkis X ašimi: 50 m/min, greitas poslinkis Y ašis: 50 m/min, greitasis eiga Z ašyje: 50 m/min, STANDARD TECHNICAL SPECIFICATION – MAZAK CAPACITY Iajdpfxsya Hngj Aauor Table working surface (length): 2,500 mm Table working surface (width): 820 mm Longitudinal (cross travel) X-axis: 2,000 mm Column (cross travel) Y-axis: 800 mm Spindle head (vertical travel) Z-axis: 720 mm Minimum distance from spindle nose to table top: 140 mm Maximum distance from spindle nose to table top: 860 mm Table load capacity (uniform load): 1,700 kgf Spindle head rotation (B-axis): ±110° SPINDLE HEAD Spindle taper: 7/24 taper, No. 40 Maximum spindle speed (standard): 18,000 min⁻¹ Minimum spindle speed (standard): 35 min⁻¹ Main spindle motor output (continuous): 26.0 kW FEED RATE Rapid traverse (X-axis): 50 m/min Rapid traverse (Y-axis): 50 m/min Rapid traverse (Z-axis): 50 m/min TABLE Table length: 2,500 mm Table width: 820 mm T-slot width: 18 mm Number of T-slots: 7 Distance between centers: 100 mm Height from machine base to table surface: 870 mm AUTOMATIC TOOL CHANGER Tool storage capacity (standard): 30 Tool storage capacity (optional): 48 Tool selection: Mazatrol memory random access Tool holder base: CAT-40 / MAS BT-40 Max. tool diameter with adjacent tool: 80 mm Max. tool diameter without adjacent tool: 130 mm Max. tool weight (including holder and taper pin): 8 kgf Total tool storage max. weight: 150 kgf Max. tool length (from measuring instrument line): 350 mm Tool change time (chip-to-chip): 4.7 s MACHINE DIMENSIONS Machine height (from floor): 3,355 mm Machine width: 4,250 mm Machine depth: 4,046 mm Machine weight: 14,000 kg OTHER Power supply voltage: AC380/400/415V ±10% Power supply frequency: 50/60 Hz ±1 Air pressure: 0.5–0.9 MPa Air capacity: 260 l/min Coolant tank capacity: 450 L STANDARD MACHINE EQUIPMENT – MAZAK GENERAL MACHINE OPTIONS Foundation kit (base bolts & plates) One set of setting tools Work area lighting Power transformer for European market USB I/F (1 port) MANUALS, OPERATING INSTRUCTIONS One set of documentation (CD) SPINDLE SPEED Spindle speed: 18,000 rpm (#40) MACHINE BODY COLOR Mazak standard color (F white / S black) SAFETY, HEALTH Worldwide safety measures Work area door interlock with limit switch Full enclosure Full-coverage chip and coolant guarding TOOL MAGAZINE 30-position tool magazine COOLING SYSTEMS Full coolant system HIGH-PERFORMANCE/HIGH-PRESSURE COOLING Through-spindle coolant (5 bar, 71 PSI) PRODUCTION AUTOMATION SYSTEMS Automatic start/stop + warm-up MEASUREMENT SYSTEMS Automatic tool length measurement & breakage detection POSITIONING SYSTEM Absolute positioning system CHIP CONVEYOR Chip conveyor preparation (left side) NC CONTROLLER – 15 functions 19" color LCD (touch screen) 3-D coordinate conversion Relocation sensor B) Shape compensation for rotary axes EIA/ISO code input function (standard) Background toolpath check LAN connector High smoothing control Mazak 2D software (shape compensation) Mazak 3D high-speed software package Mazak tapping/pre-drilling Tornado (Mazatrol) Mazatrol SmoothX CNC Movable control panel SD memory I/F (1 slot) + USB I/F (1 slot) Smooth standard software

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, veikimo valandos: 5 416 h, keliamoji galia: 3 800 kg, kėlimo aukštis: 15 740 mm, kuro tipas: dyzelinas, statybinis aukštis: 2 850 mm, šakių laikiklio plotis: 1 500 mm, tuščias svoris: 12 650 kg, bendras ilgis: 4 700 mm, pavaros tipas: Diesel, statybos plotis: 2 290 mm, Pasukamas teleskopinis krautuvas Šakių plotis: 125 mm Iedpfexir Enex Aaujar Šakių storis: 50 mm Stiebo tipas: nėra Techninė būklė: gera Priekinių padangų dydis: 405/70-20 Galinės padangos dydis: 405/70-20 Aprašymas: maks. išsikišimas 12 980 mm Pilna kabina, saugos šviesa,

Būklė: naudotas, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of manufacture: 1998 Travel distances X: 400 mm Y: 320 mm Z: 400 mm Table size 650 x 350 mm Ijdpfx Aaslvyrbsuoar Spindle taper SK 40 Spindle speed range 40 - 2500 rpm Feed rates X, Y and Z axes 0 - 1000 mm/min, infinitely variable Rapid traverse X, Y axes 4000 mm/min Rapid traverse Z axis 3000 mm/min Quill travel vertical 60 mm Spindle drive power 3 kW Electrical connection 400 Volt, 50 Hz - CNC contouring control Heidenhain TNC 124 - Spindle speed via 2 gearbox stages and infinitely variable electronic variator drive - Vertical milling head swivels +/- 90° - Hydraulic tool clamping - Fixed angle table - Control cabinet fixed to machine - Coolant tank with pump adjacent - Centralized lubrication system - Lighting Space requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg In good condition

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, bendras svoris: 1 000 kg, bendras ilgis: 4 250 mm, Tiltinis kranas ABUS - VS 1t x 4250 MACH-ID 9308 Isdpfx Ajx Dkqloaujar Gamintojas: ABUS Tipas: VS 1t x 4250 Atkreipkite dėmesį: Informacija šiame puslapyje buvo pateikta pagal mūsų geriausias žinias ir galimybes, taip pat, kiek įmanoma, gauta iš gamintojo. Informacija pateikta sąžiningai, tačiau tikslumas nėra garantuojamas. Todėl tai nėra pasiūlymas ar sutarties sąlyga. Rekomenduojame patikrinti visą svarbią informaciją.

Gamybos metai: 1998, būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: TH20010018, Demag Overhead Crane Crane System Crane Runway Indoor Crane Crane Iaodpfxjv A Rr Ds Aaujr Payload / lifting capacity max. 3.2t - 3200kg, span 13,300 mm External dimension with end carriages approx. 13,500 mm Crane with frequency inverter control and servo motors!!! 2x Demag DH wire rope hoists with pendant and radio remote control RC-J for single or tandem operation of both hoists Overall height from top of crane to hook approx. 900 mm End carriage length with buffers approx. 2,500 mm Hoisting height of wire rope hoist 6,000 mm Weight approx. 3,200 kg Incl. 2x 25m running rails HEB400 (400x300mm), incl. power rails!!! Girder lengths per side: 1x approx. 15m 1x approx. 10m Support spacing 10/10+5m Crane is dismantled, immediately available ex-location 75053 Gondelsheim Very good used condition ----- Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please request based on postcode Collection preferred

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1991, mašinos/transporto priemonės numeris: KA20+23, ABUS kranų danga, kranų bėgiai, tiltiniai kranai, salės kranas, kranas Yra 2 vienodi kranai!! Papildomai galimos 2x 20 m ilgio bėgių HEA220, 4 atramos (lango pusė) bei 20 m Vahle srovės bėgių Naudingoji apkrova / kėlimo galia 1 t - 1000 kg Vėžės plotis 9500 mm, išorinis matmuo apie 9750 mm Iodpfx Aaexdv Nmjusar Pagaminimo metai 1990 su grindų valdymu Kėlimo aukštis 6 m Kėlimo mechanizmas GM grandininis keltuvas, pakėlimo aukštis 4 m Konstrukcijos aukštis nuo krano viršaus iki kablio ~600 mm Galvutės nešiklio ilgis su buferiu apie 220 cm Kranas išardytas ir iškart prieinamas Labai gera būklė, yra patikros knyga Taip pat yra koloninių sukamųjų kranų ir sieninių sukamųjų kranų Demag KBK ir Abus HB sistemos, taip pat Errikla, Hadef, Stahl KT 2000 ir pan. Pristatymas per transporto įmonę galimas, teiraukitės pagal pašto kodą Pageidautina atsiimti vietoje

Būklė: naudotas, Aggregate module, finishing unit, sanding unit, sanding station, belt sander, belt sanding machine, edge sander, edge sanding machine, profile sanding unit, small belt sander - Comes from a Homag edge banding machine - Swiveling - Height adjustable - Max. sanding belt width: 80 mm - Oscillating - Sanding shoe: with air cushion - Drive: 1.1/1.4 kW Iedpfob Uhvljx Aauoar - Speed: 1425/2850 rpm - Sanding shoe dimensions: L/W mm - Quantity: 1 piece available - Dimensions: 1000/1200/H1000 mm - Weight: 292 kg/piece

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 16/195245, kartojimo tikslumas: 0,025 mm, darbo diapazonas: 3 660 mm, X ašies eiga: 3 660 mm, Y ašies eiga: 1 830 mm, Z ašies eigos atstumas: 200 mm, pozicionavimo tikslumas: 0,025 mm, įvesties srovės tipas: trifazis, įėjimo įtampa: 400 V, aliuminio lakšto storis (maks.): 200 mm, stalo ilgis: 4 000 mm, darbinis greitis: 212 mm/s, stalo plotis: 2 000 mm, slėgis: 6 000 juosta, pozicionavimo greitis: 12 700 m/min, greitas poslinkis X ašimi: 12 700 m/min, greitas poslinkis Y ašis: 12 700 m/min, darbinis slėgis: 6 000 juosta, pjovimo greitis: 7 620 mm/min, važiuojamoji greitis (maks.): 12 700 mm/min, padavimo ilgis X ašis: 3 660 mm, padavimo eiga Y ašimi: 1 830 mm, padavimo ilgis Z ašis: 200 mm, bendras plotis: 21 000 mm, X ašies padavimo greitis: 12 700 m/min, Y ašies padavimo greitis: 12 700 m/min, vandens slėgis: 6 000 juosta, suslėgto oro jungtis: 6 juosta, siurblio slėgis: 6 000 juosta, produkto aukštis (maks.): 200 mm, darbinis ilgis: 3 660 mm, įėjimo dažnis: 50 Hz, galia: 75 kW (101,97 AG), keliamoji galia: 3 200 kg, gerklės gylis: 21 000 mm, FLOW I-6012 IFB – Premium Waterjet Cutting System with 87,000 PSI & Dynamic Waterjet Cut ANY material up to 250 mm thick – accurate to 0.025 mm. This Flow IFB is not your average waterjet cutting machine. Featuring 87,000 PSI HyperPressure technology and the patented Dynamic Waterjet cutting head, it ranks among the very best. Comparable new units now cost over €400,000. WHY THIS MACHINE WILL IMMEDIATELY BOOST YOUR OPERATIONS: Iaodpfoyl S Nysx Aausr - 87,000 PSI instead of the usual 60,000 PSI: This means 20–50% higher cutting speed, 30–50% lower abrasive consumption, resulting in significantly lower unit production costs for daily operations. - Dynamic Waterjet with 5-axis kinematics: Automatic compensation for taper and stream lag. Achieve burr-free, taper-free cut edges at 2–4 times the speed of conventional systems – with no post-processing required. - Ready for production after an oil change: This unit was in regular operation until August 2025. No long periods of downtime, no hidden damage. Operating hours can be checked directly via the control unit during inspection. - Large cutting area 1,830 x 3,660 mm: Process large sheets, plates, and components without needing to re-clamp. Ideal for job shops, metal fabrication, stone processing, and prototyping. - Siemens Sinumerik 840D: Industry-standard controller. Your operators are likely familiar with the system; spare parts and support will remain available for the long term. TECHNICAL SPECIFICATIONS: Manufacturer: Flow International Corporation (USA) Model: I-6012 IFB (Integrated Flying Bridge) Year of manufacture: 2007 Serial no.: 2006353W-044 Cutting area: 1,830 x 3,660 mm Z-axis travel: 200 mm Table dimensions: 2,000 x 4,000 mm Table type: Slatted table with water catchment tray Pump: Flow HyperJet Model 7X Intensifier Operating pressure: 87,000 PSI (6,000 bar) Motor: 100 HP (75 kW) Power supply: 400V / 3-phase / 50 Hz Cutting head: PASER ECL Plus with Dynamic Waterjet Axes: 5 axes (+/- 10° articulation) Height sensor: automatic Accuracy: +/- 0.025 mm Repeatability: +/- 0.025 mm Max. travel speed: 12,700 mm/min Max. cutting speed: 7,620 mm/min Controller: Siemens Sinumerik 840D Software: FlowMaster / FlowPath CONDITION: The machine is stored dry and protected in a hall. All components are complete. There is no visible damage or corrosion. An oil change is required before recommissioning. Operating hours can be read directly from the Sinumerik control system during inspection. SCOPE OF DELIVERY: - Complete Flow I-6012 IFB waterjet cutting system - 87K PSI HyperJet intensifier pump with 100 HP motor - Dynamic Waterjet cutting head (5-axis, PASER ECL Plus) - Siemens Sinumerik 840D controller with PC operator station - Complete abrasive delivery system - Slatted table with catchment tray - Complete electrical cabinets - Spare parts on pallet (high-pressure hose, various components) - 8 original manuals (German/English) Overhead crane available onsite for loading. Viewing possible at any time by appointment.