Juostinis šlifuoklis

A+B Mod. ACO-2, 400 Volt

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Nedpfxorn Riqj Agwodd Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, lazerio galia: 3 000 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: IndraMotion MTX Laser power: 3000 Watts Standard equipment: Machine: - Coordinate guidance for high-precision machining - Robust, easily accessible C-frame - Linear magazine with 21 tool stations and 4 clamps - Drives with maintenance-free three-phase servomotors - Repositioning device with programmable hold-down - Foot pedal for closing clamps - Ball tables - 2 parts flaps, 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser cut parts - Slag cone detection TRUMPF Laser: - Solid-state laser TruDisk 3001 with 1 fiber output - Pump diode excitation - Fiber (LLK) according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function Cutting head: - Solid-state laser compact cutting unit - ControlLine Punch head: - Electro-hydraulic punch head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down (active / passive / reposition) - Stroke counter for punches and threads - Spray lubrication for punches - Punch slug extraction - Calculation of fill level in the punch console - Level monitoring for thread forming and tool lubrication Control: - Open control based on Rexroth IndraMotion MTX - Operator panel with 17" touch display - Program management - Production planning - Integrated technology data - Remote service via internet - Programmable cutting gas pressure - Automatic shutdown with wake-up mode Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Two-beam light barriers - Monitoring system for gas pressure, temperature, cooling water, etc. - Rapid hydraulic shutdown - Stray radiation protection - Compact dust extraction unit - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication for die incl. fill level monitoring - Additional clamp - 4 height-adjustable clamps - Vibration-damped installation - Chip conveyor with tilting container - Blowing device for small parts - Warping detection SheetMaster: Nodpfswld Susx Agwedd - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double-sheet detector for double-sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing on machine - Simultaneous loading and unloading during main time - Peeling system incl. centering aid for medium format (2500x1250) - First standard additional suction cup package - Second standard additional suction cup package - Unloading monitoring of laser parts GripMaster: - Parts conveyor belt at punch station - Parts conveyor belt at laser station ToolMaster with 70 stations (punch operation only): - Simultaneous retooling of ToolMaster during main production time

Sąlyga: naujas, The bSander 75.200 & 150.200 are industrial belt grinders designed for grinding pipe ends and profile ends, edge grinding, and face grinding on the upper surface of the unit. bSander 150.200: Belt dimensions: 150 x 2000 mm Ndodpjd Dp Aajfx Agwjd Belt speed: 29 m/s Drive power: 4.0 kW // 3x400 V // 50Hz Dimensions (L x W x H): 700 x 530 x 1130 mm Weight: 90 kg bSander 75.200: Belt dimensions: 75 x 2000 mm Belt speed: 29 m/s Drive power: 3.0 kW // 3x400 V // 50Hz Dimensions (L x W x H): 700 x 490 x 1130 mm Weight: 72 kg Price on request

Sąlyga: naudotas, rida: 1 015 000 km, Gamybos metai: 2005, Purpose: Goods transport Serial number: YV3R9G1296A10xxxx Please contact ATS Norway for further information. Please quote reference number upon request: 20949 Specifications: - Model year: 2005 - Not EU-approved - Mileage: approx. 1,015,000 km - 420 hp - 3 axles - Tyres (see photos) - Summer tyres included - Right rear light removed - Reversing camera - Paintwork has started to peel - Automatic transmission - Air conditioning - Radio - Self-parking wiper fault - Air in the washers - Available immediately Description: 2005 Volvo 9700H bus with 54 seats, comes with summer and winter tyres. The bus is currently fitted with winter tyres; the owner states the summer tyres are in excellent condition. There is a fault in the self-parking wipers. The bus will be cleaned inside prior to sale. Available immediately. Km: 1,015,000 HP: 420 TÜV: No EU-approved until: 25.06.2021 Own weight: 15,290 kg Ndedpfxswx D Trj Agwed Total weight: 24,750 kg Payload: 9,385 kg Width: 255 cm Length: 1,450 cm Euro: 3 Model: 9700H bus with 54 seats, summer and winter tyres Transmission: Automatic Number of seats: 54

Sąlyga: beveik kaip naujas (parodų įrenginys), A demonstration belt grinder WIEGAND with two belt speeds, ideal for steel and stainless steel Belt dimensions: 2000 x 150 mm Ndjdpfxjpgmufo Agwjd Belt speed: 18 / 37 m/sec Power: 2.2 / 3.8 kW 400V/50Hz Weight: 110 kg Technical data and dimensions: subject to change/errors excepted

Sąlyga: naujas, The SSB 50 F Super VT is a top-tier column drilling machine from KNUTH in the category of pillar and upright drilling machines, ideally suited for workshops handling both maintenance and production tasks. With its robust construction and wide range of features—including drilling, countersinking, reaming, and thread cutting—it is ideal for single-part and small-series production. Equipped with an 8” touchscreen control panel, the machine allows for intuitive operation in selecting the optimal machining parameters. The infinitely variable spindle speed and motorized height adjustment of the table ensure precise results, while the additional thread-cutting function provides further operator support. The SSB 50 F Super VT comes standard with practical accessories such as a coolant system and a splash-proof LED work light. Whether in steel or hall construction or for maintenance applications, this powerful and durable machine will meet your demands. Order the SSB 50 F Super VT now and optimize your workshop. Ndedpfx Ajnp Hp Ijgwsd

Sąlyga: naujas, Scantool Industrial Belt Grinder 150 x 2000 Sanding belt: 150 x 2000 mm Working width: 150 mm Motor: 4.8 HP Speed: 34 m/sec Table height: 475 to 1240 mm Belt size: 150 x 2000 mm Flat grinding surface: 530 mm Weight: 100 kg The Scantool industrial belt grinder models 75 x 2000 and 150 x 2000 are powerful, high-quality machines built to the strictest environmental and safety standards. These belt grinders come standard with a motor brake, adjustable working height, eye protection, angle stop, and motor protection switch with no-voltage release. The low-noise, CE-certified machine is ideal for grinding all types of metals. Features: - Motor protection switch with no-voltage release - Separate emergency stop - Motor brake - Adjustable angle stop Ndedpfx Agjgk Al Sjwed - Eye protection - Infinitely adjustable working height for an ergonomically correct working position - Perfect design for fast, effective, and safe grinding - Self-adjusting belt tension - Premium Danish quality

Sąlyga: naujas, Bernardo Belt Grinding Machine MS 150 x 2000 S-2 Belt dimensions: 150 x 2000 mm Belt speed: 14.5 / 29 m/sec Contact wheel (diameter x width): 200 / 155 mm Flat grinding table: 460 x 150 mm Extraction port (diameter): 100 mm Motor output power S1 100%: 2.1 / 2.8 kW Ndodpfxjd Rw Rhs Agwjd Motor input power S6 40%: 2.8 / 3.6 kW Voltage: 400 V Length: 1080 mm Width: 520 mm Height: 1000 mm Weight approx.: 85 kg

Sąlyga: naujas, Belt width: 150 mm Belt length: 2,000 mm Belt speed: 30 - 34 m/sec Total power requirement: 4 kW Machine weight: approx. 100 kg Space required: approx. 1.2 x 0.5 x 0.85 m Njdsirwwpopfx Agwjdd

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Rational scc202e, 63 kW, įrenginys po apžiūros. Ndsdpew S Nwzefx Agwed