Jerome Link

Sąlyga: naudotas, Number of spindles: 3 pcs. Number of tool sets: 1.3/4.1 pcs. Spindle diameter: 50, 40 mm Spindle lengths: 120, 320, 125 mm Weight: 2500 kg Loading dimensions (L x W x H): 3800x1400x2000 mm Table length: 3470 mm Weinig Univar 6 P For sale on behalf of a customer Operating voltage: 380 Volt, 50 Hz. For re-profiling windows, doors and similar items with asymmetrical profiles. Aggregate configuration: 1. Right-hand climb spindle, pneumatically sequenced 2. Right-hand profiling spindle 3. Fitting spindle The profiling spindle is suitable for mounting multiple tools above one another. Spindle movement is pneumatic. For tear-free re-profiling, spindle 1 operates in climb mode. For the last 100 mm of each frame end, this spindle immerses the appropriate tool into the timber to prevent tear-out at the frame corners. Machine base, tables, guides: The machine base is made from heavy, torsion-resistant, and vibration-absorbing components. Right-hand stops in the profiling zone are made of Pertinax. Before the profiling spindle, there is a split stop with sliding rail for short pieces. Additional stop rail included for large-format frames. Feed system: Continuous, chainless feed with rubber rollers. Air blast device for feed rollers and table. Spindles, hood: High concentricity and dynamically balanced spindles. Extraction hoods designed for optimal chip flow. Easiest tool change by quick-opening hood covers. Machine operation, adjustment aids: Machine operated from the front. Stops adjustable to tool diameter using mechanical position indicators. Machine electrics, motors, controls: Electrical design in accordance with DIN VDE 0113 / EN 60204 / IEC 204-1 standards for the electrical equipment of industrial machines. Other electrical regulations are not considered. Motors are dynamically balanced. Tool position control via selector switch from the operator panel. Tools: Machine is supplied with service tools but without processing tools. SPINDLE 1 Climb spindle Number of tools: 1 Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 120 mm Maximum tool diameter (re-profiling): 232 mm Reference tool circle: 112-140 mm Rest position below table: 10 mm Motor power: 4 KW (optionally 5.5 KW) SPINDLE 2 Number of tools: 4 Vertical spindle stroke: 3 x 80 mm = 4 tools, optionally adjustable to 2 x 95 mm = 3 tools Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Profile unit feed rate: 8 m/min Feed roller width: 50 mm / 35 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenons: min. 245 mm Maximum tool diameter: With reference diameter 112 mm: 210 mm With reference diameter 140 mm: 232 mm Maximum tool diameter (re-profiling): 232 mm Lhodpsxpi Elofx Acusn Reference tool circle: 112-140 mm Rest position below table: 10/5 mm Motor power: Spindle: 11 KW Feed: 1.1 KW Feed rate, profiling unit: continuously variable 6-12 m/min Feed roller width: 50 mm Feed roller diameter: 95 mm Stop height: 70 mm Working width: min. 30 mm; max. 220 mm Working height: min. 30 mm; max. 100 mm Workpiece length without tenons: min. 245 mm Special equipment: 3 mechanical spindle stops

Sąlyga: naudotas, Number of spindles: 4 pcs Number of tool sets: 11 pcs Spindle diameter: 50, 40 mm Spindle length: 285, 125 mm Length: 4000 mm Width: 2000 mm Height: 2200 mm Weinig Univar 10/3 profile milling machine --- For profiling windows, doors and similar components with asymmetrical circumferential profiles. Suitable for wood thickness from 68 to 92 mm. Processing time per frame (medium size 1.20 x 1.20 m): approx. 2 min. The available tool positions are selected from the control panel via selector switch. Machine equipped with 3 hydraulically controlled right-hand precision lifting spindles for accommodating 3 tool sets, each with 2 x 95 mm spindle stroke per spindle. The spindle lift operates in a U-motion to minimize the opening in the milling fence for short parts. The spindle lift is finely adjustable horizontally for both tool positions from the operator side. Central lubrication for spindle units. For tear-free profiling of window sashes, frames or doors, the first spindle can be switched to clockwise or counterclockwise rotation. For the last 100 mm of each frame end, this spindle dips into the passing wood using the appropriate climb-mill tool. This prevents the tool of the following spindle (working in counter rotation) from causing tear-out. The first 7 feed rollers can be lifted via foot switch, thus reducing throughput time. An additional support rail permits the profiling of large format frames as well. Continuous, chainless rubber roller feed with extremely short roll spacing. Height adjustment of the feed beam is digitally indicated. Electrical equipment according to VDE standards. Machine comes with operating tools, but without processing tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1st profiling spindle (climb and counter rotation) --- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference diameter: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position under table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm Lhodpovnv Uuofx Acuon with climb-milling plunge automation 2nd profiling spindle --- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference diameter: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position under table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 3rd profiling spindle --- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference diameter: 112 - 140 mm Max. tool diameter: 232 mm Vertical spindle stroke: 2 x 95 mm for 3 tools Home position under table: 10 mm (adjustable up to 20 mm) Horizontal spindle stroke: 80 mm 4th profiling spindle – right-hand hardware unit --- For cutting the hardware groove during profiling or grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch on the control panel. Motor: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm, 2 tools Tool diameter min. 140 mm, max. 180 mm Feed motor power: 1.1 kW Feed speed...

Sąlyga: naudotas, For profiling and rebating windows, doors, individual parts, and similar items with continuous profiles. Lodevnab Sepfx Acushn Aggregates: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic, with synchronisation device 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 mm, hydraulic 3. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW 4. Profile milling unit, horizontal bottom, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW Rebating carriage for narrow and short sashes, PC control Nexus.

Sąlyga: geras (naudotas), Gamybos metai: 1995, Angle processing unit for window production, consisting of: Lhjdpotqft Ijfx Acujn Slotting unit for 8 tools with hydraulic stroke 75 mm (clamping height 600 mm) Milling unit for 4 tools with hydraulic stroke 80 mm (clamping height 320 mm) with return feed with IV 68 tooling

Sąlyga: naudotas, Milling unit GUBISCH Spindle diameter: 40 mm Tool clamping length: 240 mm Total tool spindle length: 300 mm Lhsdpfxoq E Iu De Acujn >> Very good and robust design made of steel

Sąlyga: naudotas, For profiling and rebating of windows, doors, individual parts and similar workpieces with all-round profiles, including mechanization for single-operator handling. Units: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, feed synchronization unit 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80 hydraulic, 3. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, 4. Profile milling unit, horizontal lower, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, Ljdpfxolf H S As Acuehn Rebating carriage for narrow and short sashes, PC control Nexus.

Sąlyga: naudotas, For profiling and milling of windows, doors, individual parts and similar components with continuous profiles, including return transport. Units: Ledpfx Aolf H Suecushn 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 2. Profile milling unit, horizontal top, radially indexed to 2 positions, axially indexed to 2 positions, motor: 3 kW, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4x80, hydraulic, 4. Profile milling unit, vertical right, radially indexed to 2 positions, axially indexed to 3 positions, motor: 3 kW, 5. Profile milling unit, horizontal top, radially indexed to 8 positions, axially indexed to 2 positions, motor: 3 kW.

Sąlyga: naudotas, WEINIG UNIVAR 10 frame turning device for spare parts, from a UC-Matic window production line. Lhedpjlf H Sqofx Acuen - Year of manufacture: 1997 - Sütron BT20 control system - Machine incomplete - Further details available on request - Image for illustration purposes only.

Gamybos metai: 1987, Sąlyga: labai geros būklės (naudotas), automatic turning device WEINIG UNIVAR 10 Lhsdpfx Acef Upzheusn

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), I am selling a complete window profile production line: 1 pc. 5-spindle four-side planer with saw Weinig Unimat 23EL - without HESS sanding machine; an alternative replacement machine can be arranged 2 pcs. tenoning and slotting machines Weinig Unitec 10 2 pcs. profiling and rebate automats Weinig Univar 10 Center Lhedpfx Aofzzidocuen 1 pc. CNC dowel machine KOCH WinDoor - set of complete Weinig automation (feed system and conveyors) Year of manufacture: 1997. Cutter heads: OERTLI. Available immediately. Already dismantled and delivered on original pallets. Condition: very good!

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), I am selling the following window manufacturing set: Lhsdpfjfzzhyex Acujn - 1 unit Mortise and Tenon Machine Weinig Unitec 10. - 1 unit Profile Shaping Center Weinig Univar 10. Year of manufacture: 1998. Milling heads from OERTLI. Available immediately. Price for the complete set: €17,000. Condition: very good!

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), I am selling the Weinig Univar 10 window profile folding machine center. Year of manufacture: 1998. Milling heads: OERTLI. Available immediately. Lhsdpfx Acjfzzhrousn Unit price: €8,500. 4 units available. Condition: very good!