RH Dienstleistungen GmbH & Co KG
RH Dienstleistungen GmbH & Co KG iš Rastatt
Fa. RH Dienstleistungen GmbH & Co KG mit Sitz in Rastatt.
ponas Domenic Brammer
Werkstrasse 6a
76437 Rastatt
Vokietija
Naujausi panašių prekybininkų pasiūlymai
Mažas skelbimas
Żukówka
395 km
Balu presas
HSMHL 4809i
HSMHL 4809i
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, balo svoris: 480 kg, Parduodu presą HSM HL 4809I
Ledpjy T Iqdsfx Abrsab
Mažas skelbimas
Żukówka
395 km
Balu presas
HSMHL 7009ST
HSMHL 7009ST
Skambinti
Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Parduodu HSM 7009st presą su konvejeriu.
Lsdpfx Aey T Inpobrjab
Mažas skelbimas
Stuhr
1 013 km
Balu presas
HSMV-Press 860 Plus
HSMV-Press 860 Plus
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2021, veikimo valandos: 423 h, Funkcionalumas: visiškai funkcionalus, Vertical Baling Press HSM V-Press 860 Plus, Year of Manufacture 2021
Technical Data:
Lsdpey T E I Hsfx Abreab
Manufacturer: HSM
Model: V-Press 860 Plus
Year of Manufacture: 2021
Operating Hours: 423
Pressing Force: 60 t
Drive Power: 4 kW
Filling Opening: 1195 x 645 mm
Filling Height: 1114 mm
Bale Size: approx. 1200 x 1200 x 780 mm
Bale Weight: 480 kg
Tying: manual
Theoretical Cycle Time (idle): 25 s
Theoretical Throughput: 12 m³/h
Dimensions: 1800 x 1253 x 2990 mm (W x D x H)
Weight: 2213 kg
Materials: film, paper, cardboard
Remarks: The press is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel.
Please note:
All technical data are based on the manufacturer's information. We assume no liability for the details provided or for any errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible upon arrangement. Sale is ex location, without warranty or guarantee. Our payment terms are 100% prepayment.
Mažas skelbimas
Stuhr
1 013 km
Balu presas
HSMV-Press 860 Plus
HSMV-Press 860 Plus
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2021, veikimo valandos: 7 h, Funkcionalumas: visiškai funkcionalus, Vertical baler HSM V-Press 860 plus, year of manufacture 2021
Technical data:
Manufacturer: HSM
Model: V-Press 860 plus
Year of manufacture: 2021
Operating hours: 7
Pressing force: 60 t
Drive power: 4 kW
Feed opening: 1195 x 645 mm
Feed height: 1114 mm
Bale size: approx. 1200 x 1200 x 780 mm
Bale weight: 480 kg
Tying: manual
Theoretical cycle time (idle): 25 s
Theoretical output: 12 cbm/h
Lodsy T E Iaepfx Abrsab
Dimensions: 1800 x 1253 x 2990 mm (W x D x H)
Weight: 2213 kg
Materials: film, paper, cardboard
Note: The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel.
Please note:
All technical data is based on manufacturer information. We accept no liability for the details provided or any possible errors.
Offers are non-binding, subject to prior sale, and may be withdrawn at any time.
Inspection is possible by appointment.
Sale is ex location, without warranty or guarantee.
Our payment terms are 100% advance payment.
Mažas skelbimas
Żukówka
395 km
Balu presas
HSMHL3521S
HSMHL3521S
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, kamuolio ilgis: 1 200 mm, balo svoris: 500 kg, Įranga: apsaugos šviesos užtvara, Parduodu HSM 3521s mašiną, gamybos metai 2015–2023.
Ljdpfjy T Empox Abrjab
Mažas skelbimas
Stuhr
1 013 km
Balu presas
PaalKonti 325 G
PaalKonti 325 G
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2013, veikimo valandos: 12 110 h, Ką tik atvyko
Balenų presas Paal Konti 325 G, pagamintas 2013 metais
Techniniai duomenys:
Gamintojas: Paal
Modelis: Konti 325 G
Pagaminimo metai: 2013
Darbo valandos: 12110
Presavimo galia: 100 t
Variklio galia: 2 x 55 kW
Pildymo anga: 1020 x 1750 mm
Balenų matmenys: 750 x 1100 mm, ilgis reguliuojamas
Automatinis 5 kartų surišimas
Našumas pagal tankį:
35 kg/m³ apie 13,5 t/val
60 kg/m³ apie 21,5 t/val
100 kg/m³ apie 33 t/val
Didžiausias baleno svoris: iki 800 kg
Transportavimo matmenys: apie 12.216 x 2.530 x 2.800 mm (ilgis x plotis x aukštis)
Mašinos svoris: apie 28.000 kg
Perdirbamos medžiagos: popierius, kartonas, lengvosios atliekos, plastiko atliekos
Lajdpfoy Twt Uox Abrjb
Atkreipkite dėmesį:
Visi techniniai duomenys pagrįsti gamintojo informacija. Už pateiktų duomenų tikslumą atsakomybės neprisiimame. Pasiūlymas nėra įpareigojantis, galimas tarpinis pardavimas, pasiūlymas gali būti atšauktas bet kuriuo metu. Apžiūra galima pagal susitarimą. Pardavimas tik iš anksto apmokėjus, iš fabrikų, be garantijos ir be teisės į grąžinimą.
Mažas skelbimas
Stuhr
1 013 km
Balu presas
HSMV-Press 860 Plus
HSMV-Press 860 Plus
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2021, veikimo valandos: 245 h, Funkcionalumas: visiškai funkcionalus, Vertical baler HSM V-Press 860 plus, year of manufacture 2021
Technical data:
Manufacturer: HSM
Model: V-Press 860 plus
Year of manufacture: 2021
Operating hours: 245
Pressing force: 60 t
Drive power: 4 kW
Feed opening: 1195 x 645 mm
Lasdpfoy Tvzdjx Abrob
Feed height: 1114 mm
Bale size: approx. 1200 x 1200 x 780 mm
Bale weight: 480 kg
Binding: manual
Theoretical cycle time (idle): 25 s
Theoretical pressing capacity: 12 cbm/h
Dimensions: 1800 x 1253 x 2990 mm (W x D x H)
Weight: 2213 kg
Materials: film, paper, cardboard
Note: The baler is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel.
Please note:
All technical data is based on manufacturer specifications. We do not assume liability for stated information or possible errors.
Offers are subject to change, prior sale reserved, and can be revoked at any time.
Inspections are possible by appointment.
The sale is ex-location, without warranty or guarantee.
Our payment condition is 100% prepayment.
Mažas skelbimas
Bergisch Gladbach
1 210 km
Balu presas
BramidanBS W
BramidanBS W
Skambinti
Būklė: naudotas, Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 230 V, įėjimo srovė: 10 A, bendras svoris: 550 kg, triukšmo lygis: 67 dB, galia: 1,1 kW (1,50 AG), įėjimo dažnis: 50 Hz, Siūlome naudotą Bramidan BS W presą, pagaminimo metai – 2017.
Serijos numeris: PVB384139
Modelis: BS W
Pagaminimo metai: 2017
Nominali įtampa: 1 x 230 V
Dažnis: 50/60 Hz
Srovė: 10 A
Galia: 1,1 kW
Triukšmo lygis: 67 dB
Svoris: 550 kg
Ledpfxjy Tvcze Abreab
Jeigu turite klausimų arba reikia daugiau informacijos, rašykite mums žinutę arba paskambinkite.
Mažas skelbimas
Nysa
682 km
Horizontalusis presas HSM HL 7009
HSMHL 7009
HSMHL 7009
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, Įranga: dokumentacija / vadovas, HSM HL 7009 dešinės/kairės pusės horizontalioji presavimo mašina (horizontalus balų presas). Įrenginys yra labai geros būklės ir reguliariai prižiūrimas autorizuoto techninio aptarnavimo centro.
Šis balų presas skirtas didesniems atliekų tvarkymo projektams mažmeninėje prekyboje bei mažų ir vidutinių centrinių sandėlių reikmėms. HL 7009 modelio balės turi 1100 x 1100 mm skerspjūvį ir, esant 1200 mm ilgiui, gali sverti iki 600 kg. Tai užtikrina optimalų sunkvežimio naudingo svorio išnaudojimą.
Lsdpfx Abey Tt Rijrsab
Presavimo jėga: 700 kN
Specifinė presavimo jėga: 58 N/cm²
Variklio galia: 10,5 kW
Įtampa / dažnis: 400 V / 50 Hz
Teorinė tuščioji talpa: 42,97 m³/val.
Pakrovimo angos plotis x ilgis: 890 x 1020 mm
Balės plotis x aukštis x ilgis: 1100 x 1100 x 1200 mm
Bendras matmuo ilgis x plotis x aukštis: 5366 x 2525 x 2559 mm
Balės svoris: 600 kg
Mažas skelbimas
Goor
1 182 km
Balu presas
BOAD130 B 5V 5H 110
BOAD130 B 5V 5H 110
Skambinti
Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: V302591-20, spaudimo jėga: 130 t, pildymo angos plotis: 1 620 mm, pildymo angos ilgis: 972 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, bendras svoris: 41 000 kg, slėgis: 280 juosta, alyvos bako talpa: 2 450 l, galia: 150 kW (203,94 AG), BOA Impress D130 B 110 with side-tying – used baler, professionally maintained
Are you looking for a powerful, reliable, and immediately available baler? Then this BOA Impress D130 B 110 with side tying is an excellent opportunity.
We received this baler as a trade-in. The previous owner, a customer in the UK, operated this BOA baler for many years and has now opted for a new BOA installation, which speaks volumes about the trust in the machine, the brand, and the service behind it.
The baler was serviced exclusively by our own BOA service team in the UK throughout its entire period of use. This maintenance was always performed with great care, resulting in a fully documented service history. The machine was decommissioned in operational condition and is currently stored at our facility, available for inspection.
Prior to delivery, the machine will undergo a technical check-up. Any parts in need of replacement will be replaced to ensure the baler is offered in good working condition.
Why this BOA D130 B is attractive
The BOA Impress D130 B 110 is a heavy-duty industrial baler with high compaction force, suitable for intensive use and large throughput. With its side-tying system and robust construction, this machine is an ideal solution for companies aiming to process large volumes of material efficiently.
Laedpfxsy Tnzcs Abreb
Technical specifications
Type: BOA Impress D130 B-5V-1.6
Model: D130 B 110 with side tying
Hydraulic power: 110 kW
Main pumps: 2 × 55 kW
Back pressure pump: 5.5 kW
Filter pump: 5.5 kW
Oil cooler: 4 kW
Operating voltage: 400 V / 50 Hz
Insulation class: IP55
Hydraulic working pressure: 280 bar
Oil tank capacity: 2,450 litres
Pressing force: 1,266 kN / 126 tons
Specific pressing pressure: 10.5 kg/cm²
Ram stroke: 2,900 mm
Channel size: 1,100 × 1,100 mm
Press chamber volume: 3.51 m³
Bale length: adjustable, approx. 1,400 mm
Bale weight: up to approx. 1,200 kg, depending on material
Number of tying wires: 5 vertical / 5 horizontal
Hopper opening: 1,620 × 972 mm
Machine weight: approx. 45 tons
Noise level: < 85 dB(A)
Average cycle time under load: 20 seconds
Availability:
The machine is currently in our storage and can be viewed by appointment. Since the baler was taken in as a trade-in, dismantled in working condition, and maintained by our own service team, we can provide a reliable overview of its technical condition and history.
A robust used BOA baler with known background, professional service history, and a check-up before delivery.
Mažas skelbimas
Goor
1 182 km
Balu presas
BOAD130 A 110KW
BOAD130 A 110KW
Skambinti
Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 130 t, pildymo angos plotis: 1 620 mm, pildymo angos ilgis: 972 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, bendras svoris: 43 000 kg, garantijos trukmė: 6 mėnesiai, slėgis: 280 juosta, alyvos bako talpa: 2 450 l, galia: 110 kW (149,56 AG), paskutinio kapitalinio remonto metai: 2026, This Impress D130-A-110 kW is in like-new condition and has been fully refurbished. The press has been completely rebuilt, with almost all components replaced by new parts. Only the frame and a few mechanical components remain from the original assembly.
The main cylinder has been fully overhauled. In addition, all electrical components and the entire hydraulic control system have been replaced with new parts. The control cabinet is also entirely new, ensuring maximum reliability, safety, and operational security.
The standard configuration of this machine features horizontal tying. Thanks to the prepared frame, this baler can also be supplied with both horizontal and vertical tying on request, making the machine flexible for various material streams.
Applications
Lajdpfx Abjy Tm H Rorjb
Paper and cardboard, mixed streams, plastic films, PET bottles, containers, (long) agricultural films, plastic tanks, car tires and bumpers, and much more.
As you have come to expect from BOA, this second-hand machine can also be supplied with technical support, parts provision, and expert advice.
Mažas skelbimas
Oudehorne
1 184 km
Popieriaus presas, atliekų presas, makulatūros presas
HSMV-Press 860 plus 2015
HSMV-Press 860 plus 2015
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, Markė: HSM
Tipas: V-press 860 plus
Pagaminimo metai: 2015
Presavimo slėgis: 418 kN
Įtampa: 400 V
Didžiausias ryšulio svoris: 480 kg (priklausomai nuo medžiagos)
Ryšulio matmenys: 120 x 120 x 78 cm
Įrenginio svoris: 2083 kg
Ljdpfx Aoy Tlvdebrjab
Įrenginio matmenys: 180 cm x 125 cm x 298,5 cm
Užpildymo angos matmenys: 120 cm x 65 cm
Vaizdo įrašas apie veikiančią įrangą pateikiamas pagal užklausą.
Mažas skelbimas
Stuhr
1 013 km
Balu presas
PrestoHPK 50 BS
PrestoHPK 50 BS
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, Available from June 2026
Presto HPK 50 BS baler, year of manufacture 2011, with tumbler and optional Horstmann chain belt conveyor
Manufacturer: Presto
Model: HPK 50 BS
Year of manufacture: 2011
Drive: 30 kW
Pressing force: 50 t
Feed opening: 1600 x 1050 mm (L x W)
Channel cross-section: 700 x 1100 mm
Max. filling volume: 1.23 m³
Cycle time: 19 s
Binding: 4-fold
Throughput capacity at:
35 kg/cbm: 6 t/h
60 kg/cbm: 9.6 t/h
100 kg/cbm: 13.9 t/h
Bale weight: up to 500 kg
Machine dimensions: 8500 x 1700 x 2400 mm (L x W x H)
Machine weight: approx. 12,000 kg
Chain belt conveyor data
Manufacturer: Horstmann
Model: PK 1100/11
Year of manufacture: 2011
Belt width: 1100 mm
Lodey Ticzopfx Abrsab
Speed: approx. 0.2 m/s (max. 0.3 m/s)
Flat loading section: approx. 3000 mm
Inclined section: approx. 5000 mm
Gooseneck: approx. 1000 mm
The baler is still in operation and can be inspected under working conditions. It will be available from early June 2026.
Please note:
All technical data is based on manufacturer’s information. No liability is assumed for the above details or possible errors.
Offer is subject to prior sale, withdrawal, and change without notice.
Inspections by arrangement only.
Sale is ex works, payment in advance, without warranty or guarantee.
Mažas skelbimas
Οινόφυτα
1 877 km
Balu presas
StrautmannMK 700
StrautmannMK 700
Skambinti
Būklė: naudotas, Parduodame naudotą atliekų presavimo presą. Tinka presuoti popierių, kartoną ir plastikinę plėvelę. Presas yra visiškai veikiantis. Yra galimas veikimo vaizdo įrašas.
Lodpfsy S Tf Djx Abrsab
Mažas skelbimas
Nyderlandai
1 127 km
80 t balų presas su 8 kartų kryžminiu surišimu
Presona ABLP 80 VHK 1
Presona ABLP 80 VHK 1
Skambinti
Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 930 m³/val, Technical Data – Baler:
Manufacturer: Presona AB
Model: LP 80 VHK 1
Year of Manufacture: 2012
Total Operating Hours (Machine): 25,895 hours (as of July 2025)
Effective Operating Hours (Pump): 14,135 hours (as of July 2025)
Number of Bales Pressed: 235,597 (as of July 2025)
Main Pressing Force: 78.5 t
Lodpfx Aboy S Ru Asrsab
Specific Pressing Force: 95 N/cm²
Pre-Press Force: 28 t
Press Chamber Volume: 2.7 m³
Feed Opening Dimensions: 1,500 x 1,100 mm
Theoretical Throughput: 930 m³/hour
Throughput Under Operating Conditions: 410 m³/hour
Bale Dimensions: 750 x 1,100 mm
Drive Power: 55 kW
Tying: 5-fold vertical, 3-fold horizontal, fully automatic
Throughput at Bulk Density of:
- 30 kg/m³: approx. 9 to 12 t/hour (material dependent)
- 50 kg/m³: approx. 14 to 17 t/hour (material dependent)
- 100 kg/m³: approx. 16 to 25 t/hour (material dependent)
Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent)
Bale Weights: 450 to 600 kg (depending on material and bale length)
Hydraulic Oil Tank Volume: 1,000 L
Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H)
Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm
Machine Weight (baler): approx. 24 t
Condition of the Baler:
The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation.
The following overhaul work was carried out:
- Machine cleaned, partially derusted and partially repainted
- Hydraulic oil tank completely drained and cleaned
- Oil and air filters replaced, new hydraulic oil filled
- Press ram dismantled and cleaned
- All four running rollers removed from the press ram and replaced
- Twisting wire station with lower wire deflection pulleys cleaned and made operational
- Side guides of press ram removed, smoothed, re-installed, and re-adjusted
- Main hydraulic cylinder dismantled and disassembled for inspection
- Piston rod replaced, cylinder tube honed
- Complete seal set replaced, pressure test carried out
- Hydraulic hose of main hydraulic cylinder replaced
- Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced
- Chain cleaned, lubricated, chain tension readjusted
- Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced
- Door contact switch checked and partly replaced
- Emergency stop switch checked
- Complete electrical wiring checked and partly renewed
- Bearings of the wire guide rollers under the press replaced
- New safety guards for vertical and horizontal tying manufactured and installed
- Machine inspected, general maintenance performed, and baler tested in manual and automatic mode
Scope of Delivery:
Only the baler is being sold.
Remarks:
Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.
Mažas skelbimas
Nyderlandai
1 127 km
Balių presas 60 t
Presona ABLP 60 VH1
Presona ABLP 60 VH1
Skambinti
Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 30 143 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 800 m³/val, Technical Data of the Baler:
Manufacturer: Presona AB, Sweden
Model: LP 60 VH1
Year of Manufacture: 2015
Total Operating Hours: 30,143 hours (as of July 2025)
Actual Pump Runtime: 6,527 hours (as of July 2025)
Number of Bales Pressed: 115,193 bales (as of July 2025)
Pre-Press Force: 25 t
Main Press Force: 60 t
Specific Press Force: 73 N/cm²
Feed Opening Dimensions: 1,500 x 1,100 mm
Filling Volume per Press Cycle: 2.7 m³
Theoretical Throughput: 800 m³/hour
Throughput Under Operating Conditions: 350 m³/hour
Bale Dimensions: 1,100 x 750 mm
Drive Power: 37 kW
Tying System: 5-fold vertical, fully automatic
Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour
Bale Weights: 420 to 570 kg, depending on material
Hydraulic Oil Tank Volume: 600 L
Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H)
Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H)
Machine Weight (Press): approx. 20 t
Condition of the Baler:
The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation.
The following overhaul work was carried out:
- Machine cleaned, partially de-rusted and partially repainted
- Hydraulic oil tank fully drained and cleaned
- Oil and air filters replaced, new hydraulic oil filled
- Press ram disassembled and cleaned
- All four press ram rollers disassembled and renewed
- Grease cartridges of the automatic roller lubrication system replaced
- Guide rails on the baler floor in the pressing chamber cut out
- Floor reinforced with welded plates
- New HARDOX guide rails welded in
- Wire station and deflection pulleys for lower wire cleaned and serviced
- Guide rails from the floor of the press channel cut out
- New HARDOX guide rails welded in
- Both side walls of the press channel disassembled and de-rusted
- Worn side wall plates removed
- Complete side walls fitted and welded with new wear plates
- Main hydraulic cylinder disassembled and overhauled for inspection
- Piston rod replaced, cylinder tube honed
- All sealing sets replaced, pressure test performed
- Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained
Ledpfx Absy S Rtloroab
- Chain cleaned, greased, tension readjusted
- Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced
- Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation
Remarks:
The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.
Mažas skelbimas
Nyderlandai
1 127 km
200 t balų presas su horizontaliu rišimu
MACPRESSE EUROPA S.R.L.112
MACPRESSE EUROPA S.R.L.112
Skambinti
Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 000 kg, alyvos bako talpa: 3 100 l, tuščias svoris: 50 800 kg, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 795 m³/val, Technical Data – Baler:
Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 112
Year of Manufacture: 2002, partially overhauled in December 2025
Operating Hours: 44,590 hours (as of December 2025)
Main Press Force: 200 t
Specific Press Force: 16.5 kg/cm²
Feed Hopper Dimensions: 2,000 x 1,020 mm
Filling Volume: 2.65 m³
Theoretical Throughput Capacity: 795 m³/hour
Bale Dimensions: 1,100 x 1,100 mm, length variable
Drive Power: 2 x 75 kW
Tying: 5-fold horizontal, fully automatic
Throughput for MSW: approx. 48 to 54 t/hour, depending on material
Hydraulic Oil Tank Capacity: 3,100 L
Machine Weight (Press): approx. 50.8 t
Scope of Supply:
1 unit baler MACPRESSE, type 111A
1 unit operating manual with CE declaration, electric and hydraulic circuit diagrams
Remarks:
The machine has been serviced and partially overhauled in our workshop. The following work was carried out, and parts replaced:
• Hydraulic oil tank completely emptied and cleaned
• Oil and air filters replaced
• New hydraulic oil filled
• All hydraulic hoses replaced
• Press ram disassembled, dismantled into individual parts, mechanics serviced
• Replacement of the front two main running rollers
• Replacement of knives on the press ram
• Main hydraulic cylinder disassembled, dismantled, cylinder tube and piston rod checked, complete seal kit replaced
• Replacement of the counter-knife in the frame
• Adjustment of knife clearance to approx. 3 mm
• Upper steel guide rails in the frame (left and right) replaced
Laodpoy S Rrujfx Abrjb
• Removal of worn press floor, replacement of floor plate with wear-resistant HARDOX steel
• Tying and twisting unit disassembled, dismantled into individual parts, mechanics serviced, all twister shafts and ball bearings replaced
• Replacement of all wire rollers in the needle heads
• Wire cutters cleaned and readjusted, chains greased and tensioned
• All wire guide rollers serviced
• All door contact switches replaced
• Twister unit disassembled, dismantled, and serviced
• General maintenance performed
Finally, the baler was tested in both manual and automatic mode. Please refer to the function test video for further details.
All documentation (Operating Manual, CE Declaration, Electrical/Hydraulic Schematics) is complete. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.
Mažas skelbimas
Nyderlandai
1 127 km
Balių presas su 170 t spaudimo jėga ir transportavimo technologija
MACPRESSE EUROPA S.R.L.111
MACPRESSE EUROPA S.R.L.111
Skambinti
Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 170 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 900 kg, bendras svoris: 40 000 kg, alyvos bako talpa: 3 000 l, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 750 m³/val, For sale is a used bale press system comprising an underfloor chain belt conveyor with feed hopper, a hydraulic pre-compactor with an agitator, a MACPRESSE 111A baler, two complete wire feed rack units with five spool holders each (no wire included).
Technical Data – Baler:
Manufacturer: MACPRESSE EUROPA S.R.L.
Model: 111A
Year of manufacture: 1996, overhauled in 10/2024
Main press force: 170 t
Specific compaction force: 14 kg/cm²
Feed hopper dimensions: 1,800 x 1,020 mm
Fill volume: 2.5 m³
Nominal throughput: 750 m³/h
Bale dimensions: 1,100 x 1,100 mm, length variable
Drive power: 2 x 55 kW
Wire tying: 5-fold horizontal, fully automatic
Throughput: approx. 30 to 35 t/h, material dependent
Hydraulic tank volume: 3,000 L
Transport dimensions (with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H)
Machine weight: approx. 40 t
Laedpfx Aboy S Rqwjreb
Notes:
The baler has been partially overhauled in our workshop and function-tested upon completion, as shown in our demonstration video. Previously, the line was used for baling paper and cardboard from municipal collection. As the contract was awarded elsewhere at the end of the term, the complete system is now for sale.
A detailed photo documentation and our offer outline all performed refurbishment work and the installed new spare parts.
Full documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Viewing is possible by appointment. No liability will be accepted for technical data or potential errors.
Technical Data – Conveyor:
Manufacturer: Wagensfeld B.V.
Model: Chain belt conveyor 1700 mm
Year of manufacture: 2017
Drive power: 7.5 kW
Belt speed: 14 m/min
Loading belt length: 6,900 mm
Incline belt length: 12,885 mm
Gooseneck length: 1,747 mm
Overall length: 21,271 mm
Incline: 32°
Usable width: 1,644 mm
Drive shaft height above floor: 5,777 mm
Side wall height, loading belt: 500 mm
Side wall height, incline belt: 880 mm
Steel cleat height: 40 mm
Cleat spacing: 1,200 mm
Transport dimensions (disassembled): 15,005 x 2,500 x 2,435 mm (L x W x H)
Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D)
Notes:
The chain belt conveyor, manufactured in 2017, was custom built and installed for the baler during its last installation in the Netherlands. The conveyor is in good, ready-for-use condition and has not been overhauled. An installation drawing with pit dimensions is available.
Scope of supply:
- 1 unit chain belt conveyor, Wagensfeld B.V.
- 1 unit feed hopper with pre-compactor flaps
- 1 unit agitator
- 1 unit MACPRESSE baler, type 111A
- 2 units wire feed racks with wire spool holders, without wire
- 1 unit operating manual with CE declaration, electrical and hydraulic schematics
Mažas skelbimas
Nysa
682 km
Balu presas
HSMVK 4812
HSMVK 4812
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 1 950 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 48 t, kamuolio ilgis: 1 200 mm, ryšulio plotis: 750 mm, ryšulio aukštis: 1 100 mm, balo svoris: 550 kg, Įranga: dokumentacija / vadovas, Automatic baler HSM VK 4812
Lodpfx Aey Sm Sqjbrsab
The unit is in perfect condition.
Total operating hours: only 1,950. Number of processed bales: only 1,314.
The machine was regularly serviced and has operated indoors in the warehouse since new.
It has processed very low-dust materials – mainly textile cuttings.
Key advantages of the machine:
- Actual throughput: 6–13 t/h
- Optimal continuous operation: 6–10 t/h
- Very fast cycle → ideal for integration with belt conveyor systems
- Clearly superior to the 15–22 kW versions when handling large material flows
Technical specifications:
Pressing force: 480 kN (≈ 48 t)
Motor power: 30 kW
Connected load: approx. 32 kW
Power supply: 3 × 400 V / 50 Hz
Specific pressure: 58.2 N/cm²
Volumetric throughput: up to 332 m³/h
Weight-based throughput (practical):
approx. 6 t/h (20 kg/m³)
approx. 13 t/h (50 kg/m³)
Theoretical max. throughput:
up to 16.6 t/h at 50 kg/m³
Idle cycle time: approx. 11.2 s
Bale dimensions: 1100 × 750 × 600–1200 mm
Bale weight: up to approx. 550 kg
Press channel: 1100 × 750 mm
Feed opening: approx. 1020 × 1250 mm
We also have other balers in stock.
Transport costs depend on weight, volume, and especially distance. For transport inquiries, the following information is required: delivery address (postcode and city). Detailed arrangements require phone contact, so please inquire about transport costs and delivery options by calling us directly.
Our contact details can be found in the seller’s legal information.
We sell and export worldwide. Thanks to our large warehouse capacity, we can also deliver larger quantities flexibly and quickly.
We issue intra-Community invoices – VAT exempt.
Opening hours
Mon-Fri: 8:00–16:00
Sat: closed
Mažas skelbimas
Giraitė
23 km
Waste baler Orwak 5070
Orwak5070
Orwak5070
Skambinti
Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 3 t, Orwak 5070 baler in perfect working condition. Fully serviced, new oil. Fully equipped - strap holders, straps, hook, bale trolley.
Ljdpfx Abjy Sk H Sorjab
Mažas skelbimas
Giraitė
23 km
Waste baler Orwak 3325
Orwak3325
Orwak3325
Skambinti
Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 26 t, Orwak 3325 baler in perfect working order. Fully serviced, new oil. Fully equipped. Has additional parts for tying with wire
Ledpfoy Sk Atjx Abrsab
Mažas skelbimas
Stuhr
1 013 km
Balu presas
PrestoHPK 50 HS
PrestoHPK 50 HS
Skambinti
Būklė: naudotas, Gamybos metai: 2012, veikimo valandos: 5 812 h, Funkcionalumas: visiškai funkcionalus, Baling Press Presto HPK 50 HS, Year of Manufacture 2012, with Perforator and Inclined Conveyor (Sliding Belt Conveyor)
Manufacturer: Presto
Model: HPK 50 HS
Year of Manufacture: 2012
Operating Hours: 5,812
Drive Power: 30 kW
Pressing Force: 50 t
Feed Opening: 1600 x 650 mm (L x W)
Channel Cross-Section: 700 x 950 mm
Maximum Feed Volume: 1.06 m³
Cycle Time: 19 s
Binding: 4-fold
Laodpey R Tp Tsfx Abreb
Throughput Capacity at
35 kg/m³: 5.5 t/h
60 kg/m³: 8.8 t/h
100 kg/m³: 12.7 t/h
Bale Weight: up to 500 kg
Machine Dimensions: 8420 x 1900 x 2400 mm (L x W x H)
Machine Weight: approx. 10,500 kg
Perforator, hydraulically movable
Drive Power 2 x 4 kW / 400 V
Throughput: approx. 220 m³/h
Clear Feed Opening: 1380 x 1200 mm
Inclined Conveyor
Length: 7,931 mm
Belt Width: 1,400 mm
Overall Width: 2,026 mm
Incline: 29°
Speed: 0.6 m/s
Materials: Paper, Cardboard, Film, PET Bottles
Please note:
All technical data are based on the manufacturer's information. We accept no liability for the stated specifications or possible errors.
This offer is non-binding, subject to prior sale and can be revoked at any time.
Inspections are possible by appointment.
Sale is ex works against advance payment, without warranty or guarantee.
Mažas skelbimas
Stuhr
1 013 km
Balu presas
HSMV-Press 860 Plus
HSMV-Press 860 Plus
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2021, veikimo valandos: 450 h, Funkcionalumas: visiškai funkcionalus, Vertical baler HSM V-Press 860 plus, Year of manufacture 2021
Technical Data:
Manufacturer: HSM
Model: V-Press 860 plus
Year of manufacture: 2021
Operating hours: 450
Pressing force: 60 t
Drive power: 4 kW
Lasdpey R Srtsfx Abreb
Filling opening: 1195 x 645 mm
Filling height: 1114 mm
Bale size: approx. 1200 x 1200 x 780 mm
Bale weight: 480 kg
Tying: manual
Theoretical cycle time (idle): 25 s
Theoretical press capacity: 12 m³/h
Dimensions: 1800 x 1253 x 2990 mm (W x D x H)
Weight: 2213 kg
Materials: Film, Paper, Cardboard
Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel.
Please note:
All technical data is based on manufacturer specifications. We accept no liability for the stated information or any possible errors.
All offers are subject to change, prior sale reserved, and may be revoked at any time.
Inspections are possible by arrangement.
The sale is ex location, without warranty or guarantee.
Our payment condition is 100% advance payment.
Mažas skelbimas
Oudehorne
1 184 km
Balių presas, atliekų presas, drabužių presas, perdirbimas
HSMV-Press 1160 Plus
HSMV-Press 1160 Plus
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2008, pildymo angos plotis: 1 195 mm, pildymo angos ilgis: 65 mm, kamuolio ilgis: 120 mm, ryšulio plotis: 110 mm, ryšulio aukštis: 120 mm, balo svoris: 550 kg, bendras plotis: 1 570 mm, bendras aukštis: 2 985 mm, bendras ilgis: 1 800 mm, bendras svoris: 2 403 kg, Markė: HSM
Modelis: V-Press 1160 plus
Metai: 2008
Presavimo jėga: 532 kN
Įtampa: 400 V
Maks. ryšulio svoris: iki 550 kg (priklausomai nuo medžiagos)
Ryšulio matmenys: 120 x 110 x 120 cm
Lajdpfx Asy R Sk Njbrsb
Įrenginio svoris: 2403 kg
Įrenginio matmenys: 180 x 157 x 298,5 cm
Pakrovimo angos matmenys: 119,5 cm × 65 cm
Būklė: labai gera!
Veikiančio įrenginio vaizdo įrašas pagal užklausą
Transportavimas taip pat galimas
Mažas skelbimas
Nyderlandai
1 127 km
50 t balų presas, 22 kW variklis su wirbulatoriumi
PresonaLP 50 EH1
PresonaLP 50 EH1
Skambinti
Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2005, veikimo valandos: 30 408 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 50 t, pildymo angos plotis: 1 250 mm, pildymo angos ilgis: 1 100 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 550 kg, bendras svoris: 16 000 kg, alyvos bako talpa: 600 l, galia: 22 kW (29,91 AG), paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 530 m³/val, Technical Data Baler:
Manufacturer: Presona AB
Model: LP 50 EH1
Year of manufacture: 2005
Operating hours: 30,408 hours (as of April)
Number of bales produced: 198,059 pcs (as of April)
Main press force: 50 t
Specific pressing force: 63 N/cm²
Theoretical throughput: 530 m³/h
Throughput under working conditions: 260 m³/h
Feed opening dimensions: 1,250 x 1,100 mm
Chamber volume: 2.2 m³
Bale dimensions: 1,100 x 720 mm (variable length)
Drive power: 22 kW
Tying: 5-fold vertical, fully automatic
Throughput capacity at bulk density of:
- 30 kg/m³: 6 to 7 t/h
- 50 kg/m³: 7 to 9 t/h
- 100 kg/m³: 11 to 14 t/h
Bale density (paper/newspapers): 400 to 550 kg/m³
Hydraulic oil tank volume: 600 L
PLC: Telemecanique TSX Micro
Control panel: Schneider Magelis
Effective transport dimensions excl. press: 8,125 x 2,300 x 3,000 mm (L x W x H)
Transport weight press: approx. 16 t
Condition of the baler:
The machine has been partially overhauled in our workshop and general maintenance work has been carried out. After completion of the overhaul, the baler was tested during operation and is available for sale at short notice.
The following overhaul work was performed:
General Work:
- Machine cleaned, derusted, primed, and partially painted
- Wire ingress marks in the press channel welded and smoothed
Hydraulic Unit:
- Hydraulic oil tank drained, tank cleaned, filled with new oil
- Oil and air filters replaced
- Leaking oil sight glass on the tank replaced
- All hydraulic hoses replaced
Electrical System:
- Program menu language set to English
- Two key switches on the control panel replaced
- Control cabinet replaced
- Signal lamp on control cabinet replaced
- Flap limit switch replaced
- Electrical system for the agitating device renewed, connected, and tested
Press Ram:
- All four press ram guide rollers removed and replaced
- Main hydraulic cylinder dismantled, disassembled and partially overhauled (cylinder barrel honed, complete seal kit replaced, tightness test performed)
- All plastic wear pads on the press ram replaced
Pre-press Flap:
Lasdpfxjy R Npis Abrob
- Both bearings on the pre-press shaft replaced
- Both hydraulic cylinders dismantled, disassembled and partially overhauled (cylinder barrels honed, complete seal kits replaced, tightness test performed)
- Scraper flap on the pre-press renewed
Tying System:
- Two complete needles with wire guide rollers replaced
- Needles adjusted and set
- All wire guide rollers in the needle heads replaced
- Twister finger replaced
- Two twister shafts replaced
- All 8 wear plates on the twister unit below the twister fingers replaced
Scope of delivery:
Only the baler is being sold.
Complete documentation (operating manual, CE declaration, electrical/hydraulic diagram) is available. Inspection is possible by appointment. We do not assume liability for the technical specifications or possible errors.










































































































































































































































































































































