Hi Tech Global AG

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, spaudimo jėga: 2 000 kN, Įranga: dokumentacija / vadovas,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, spaudimo jėga: 300 kN,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, ARBURG A 1500 T 1600-400 Sukamasis stalas (29.279 val.) (S&P 3786) Pagaminimo metai: 2014 Darbo valandos: 29.379 Sraigtas: 35 mm Nwsdpfx Ajyff S Uef Njb Įpurškimo slėgis: 2500 bar Tūris: 154 cm³ Uždarymo jėga: 150 t Stulpelių atstumas: 1500 mm Min. formos aukštis: 400 mm Maks. plokščių atstumas: 700 mm Matmenys: 4600 x 1900 x 2300 mm Svoris: 11000 kg Galia: 22 kW 1500 mm stalo skersmuo, 2 pozicijų (180°) sukamasis stalas, 4 branduolių ištraukiamosios ašys, pūtimo įrenginys, dažų įrenginio sąsaja, HHG sąsaja ir kt. Kaina: pagal užklausą Kontaktinis asmuo: p. Ralf Schulz

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, ARBURG A 520 A 1500-400 ALLDRIVE (36 061 val.) įskaitant KUKA Robotą (S&P 3788) Pagaminimo metai: 2008 Darbo valandos: 36 061 val. Sraigtas: 40 HVF mm Įpurškimo slėgis: 2000 bar Įpurškimo tūris: 201 cm³ Uždarymo jėga: 150 t Stulpelių atstumas: 520 x 520 mm Minimali formos montavimo aukštis: 250 mm Maks. plokščių atstumas: 1000 mm Matmenys: 5100 x 1600 x 2700 mm Svoris: 7250 kg Galia: 60 kW Hidrauliniai akumuliatoriai, 4 x branduolio traukiklis, HHG sąsaja EM67, išpūtimo įrenginys, įskaitant KUKA Robotų sistemą KR 5 arc, transporterio juosta, apsauginė tvora Nedpfx Asyff S Ief Nowb Kaina: pagal užklausimą Kontaktinis asmuo: p. Ralf Schulz

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 58 670 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 45 mm, darbinio tūrio: 318 cm³, Clamping force: 1600 kN Maximum mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (h x v): 820 x 845 mm Clearance between tie bars (h x v): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force, forward/back: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Injection pressure: 2336 bar Shot volume: 318 cc Shot weight (PS): 289 g Injection flow rate: 143 cc/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Cylinder heating control zones: 5 Oil capacity: 489 l Dimensions and weights: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 – 90° Njdpfoydp Idex Af Nowb Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface according to Euromap 67

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 68 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, darbinio tūrio: 393 cm³, Clamping force: 1600 kN Max. tool opening force: 87 kN Moving platen opening force: 45 kN Moving platen closing force: 38 kN Clamping platen (h x v): 820 x 845 mm Clear daylight (h x v): 520 x 520 mm Mould opening stroke: 650 mm Minimum mould installation height: 300 mm Opening width: 950 mm Ejector stroke: 150 mm Ejector force (forward/back): 23 kN Injection unit: Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Cylinder heating control zones: 5 Oil capacity: 489 ltr. Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Max. mould weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Nodpeydp D Esfx Af Nowb Z: 2500 mm C: 0-90° Additional equipment: - 1 x air valve - 2 x core pulls - Robot interface according to Euromap 67

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, veikimo valandos: 37 049 h, spaudimo jėga: 4 000 kN, bendras svoris: 21 000 kg, Šis "Arburg 820 S 4000 - 2100" pagamintas 2016 m. Jos prispaudimo jėga - 4000 kN, sraigto skersmuo - 60-100 mm, o brokas sveria iki 1860 g. Mašinoje sumontuotas robotas SEPRO SR AXESS 30 S3, o hidraulinio siurblio pavaros galia - 55 kW. Idealiai tinka tiksliam plastiko liejimui įpurškimo būdu. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. Prispaudimo įtaisas • Užrakinimo jėga (maks.): (maks. (150 kN) • Atidarymo jėga (maks.): 100 kN / padidinta: 800 kN • Atidarymo eiga (maks.): 700 mm • Formos aukštis (min.): 350 mm • Atstumas tarp plokščių (maks.): 1050-1550 mm • Laisvas atstumas tarp rišamųjų juostų: 820 × 820 mm • Formos montavimo plokštės (plotis × aukštis): 1171 × 1171 mm Nwsdpfxsydpvbo Af Njb • Formos pusės svoris (maks.): 4500 kg • Išstūmimo jėga (maks.): 100 kN • Išstūmimo eiga (maks.): 250 mmHidraulika / pavara / kita įranga • Hidraulinio siurblio pavaros galia: 55 kW • Suminė įrengtoji galia: • 4000-2100: 88,9 kW • 4000-3200: 96,2 kW • Spalva: plastiku dengta konstrukcija (šviesiai pilka / mėtų žalia / rapsų geltona) • Valdymo spintos: Saugos reglamentas DIN EN 60204 • Kištukinių lizdų derinys: 1 Schuko + 1 Cekon • Įpurškimo įrenginio maitinimo šaltinis: 1 × 16 AĮpurškimo įrenginys • Efektyvusis varžto ilgis (L/D): 23/20/17,5 | 70/80/90 | 23/20/18 • Sraigto skersmuo (mm): 60/65/70 | 80/90/100 | 60/65/70 • Teorinis išpurškiamas tūris (maks., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Šūvio svoris (maks., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Įpurškimo slėgis (maks., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Įpurškimo debitas (maks., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Įpurškimo debitas su akumuliatoriumi (maks., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Grįžtamasis teigiamas/neigiamas slėgis (maks., bar): 350/50 | 350/50 | 350/50 • Sraigto apskritiminis greitis (maks., m/s): 0,38 | 0,28 | 0,28 • Sraigto sukimo momentas (maks., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Purkštuko prisilietimo jėga (maks.): 110 kN • Purkštuko eiga (maks.): 600 mm • Šildymo zonos / šildymo našumas: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Įrengtas purkštukų šildymas: 1000 W | 1250 WMatmenys ir svoris (bazinė mašina) • Laisvos vietos ilgis: 490 mm • Elektros jungtis (apsauga nuo saugiklių) variklis + šildymas: 250 A • Elektros jungtis (apsauga nuo saugiklių) variklis: 125 A • Elektros jungtis (apsauga nuo saugiklių), šildymas: 50 / 63 A Papildoma įranga • SEPRO SR AXESS 30 S3 robotas (2008 m.)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, spaudimo jėga: 4 200 kN, varžto skersmuo: 80 mm, injekcijos svoris: 1 464 g, bendras aukštis: 2 500 mm, bendras svoris: 25 500 kg, valdiklių gamintojas: KRAUSS MAFFEI, valdiklio modelis: MC5, gaminio ilgis (maks.): 7 300 mm, Šis "Krauss Maffei 420-3000 CX" pagamintas 2011 m. Tai tvirta hidraulinė įpurškimo mašina iš Vokietijos, pasižyminti 4200 kN prispaudimo jėga ir 80 mm skersmens sraigtu. Ji palaiko 1464 g PS masės išpurškimo svorį ir 478 cm³/s įpurškimo greitį. Idealiai tinka didelės apimties gamybai, nes turi 1200 ciklų per valandą sauso ciklo dažnį. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. Nwsdpfx Afeydnp He Nsb • Elektriniai duomenys: • Maitinimo šaltinis: maitinimo šaltinis: 400 V / 3N~ / 50 Hz • Įrengtoji šildymo galia: 36 kW • Nominali siurblio variklio galia: 75 kW • Statinės šildymo zonų skaičius: 7 • Našumas ir valdymas: • Sausieji ciklai (Euromap 6): 1 200 ciklų per valandą • Valdymo sistema / versija: MC5 3.3 • Mašinos spalva: pilka / balta / mėlyna • Prispaudimo įtaisas: • Formos atidarymo jėga: 249,6 kN • Atstumas tarp surišimo strypų: 800 × 800 mm • Judančios plokštės jėga (atidarymas / uždarymas): 124,7 / 102,4 kN • Plokštės matmenys: 1270 × 1200 mm • Formos atidarymo eiga: 1020 mm • Mažiausias formos aukštis: 380 mm • Išstūmimo eiga: 250 mm • Plokštės atidarymo eiga: 1400 mm • Įpurškimo įrenginys: • Purkštuko antgalio spindulys: 15 mm • Purkštuko angos skersmuo: 6 mm • Įpurškimo slėgis: 1856 bar • Įpurškimo tūris: 1608 cm³ • Įpurškimo greitis: 478 cm³/s

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2022, spaudimo jėga: 3 430 kN, varžto skersmuo: 60 mm, bendras aukštis: 2 397 mm, bendras svoris: 21 000 kg, gaminio ilgis (maks.): 8 073 mm, Ši "Toyo Si-350-6S JH750E-PACK" buvo pagaminta 2022 m. Jo prispaudimo jėga 3430 kN, sraigto skersmuo 60 mm, o įpurškimo greitis 300 mm/s. Bendra įrengtoji galia - 85,6 kW, o matmenys - 8073 × 1930 × 2397 mm, todėl tai yra patikimas pasirinkimas tiksliam liejimui. Susisiekite su mumis ir gaukite daugiau informacijos apie šią mašiną. • Įrengtoji šildymo galia: 27,5 kW • Bendra įrengtoji galia: 85,6 kW • Valdymo sistema: SISTEMA 800 • Sąsajos: "Euromap 67", "Euromap 73".Prispaudimo įtaisas: • Atstumas tarp strypų: Atstumas: 810 × 810 mm • Plokštės matmenys: 1050 × 1050 mm • Atidarymo eiga: 700 mm • Formos aukštis (min. / maks.): 300 / 770 mm • Išstūmimo eiga: 7,7 mm: 150 mm • Išstūmimo jėga: 60,0 kNIšstūmimo įrenginys: • Išpurškimo greitis: 300 mm/s • Įpurškimo slėgis: 220 MPa • Laikymo slėgis: 200 MPa • Teorinis įpurškimo tūris: 763 cm³ • Įpurškimo greitis: 848 cm³/s • PS įpurškimo našumas: 210 kg/h • Sraigto greitis: 0-350 aps/min. • Įpurškimo eiga: 270 mm Njdoydnbpspfx Af Newb • Purkštuko kontakto jėga: 39,0 kN

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, veikimo valandos: 65 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 3 500 kN, varžto skersmuo: 70 mm, darbinio tūrio: 1 047 cm³, Clamping force: 3500 kN Maximum mold opening force: 220 kN Moving platen drive force, opening: 105 kN Moving platen drive force, closing: 95 kN Clamping platen (H x V): 1100 x 1095 mm Clear distance (H x V): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Max. opening width: 1300 mm Ejector stroke: 250 mm Ejector force fwd/rev: 95 kN Injection Unit: Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1778 bar Shot volume: 1047 cc Shot weight (PS): 953 g Injection flow: 527 cc/s Screw speed: 285 rpm Plasticizing rate: 95 g/s Nozzle contact force: 110 kN Electrohydraulic Equipment: Rated pump motor power: 75 kW Nwodpfxeydmkco Af Neb Installed heating capacity: 30 kW No. of heating zones (barrel): 6 Oil fill volume: 720 l Dimensions and Weight: Space requirement approx.: 6.50 x 2.20 x 2.40 m Overall weight: 15,370 kg Max. mold weight: 4,780 kg Accessories: - Vibration dampers Additional equipment: - 1 x hydraulic core pull - 1 x air valve - Robot interface according to Euromap 12

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Clamping unit: Clamping force: 4200 kN Tie bar spacing (h x v): 900 x 800 mm Platen dimensions (h x v): 1400 x 1250 mm Min. mould height: 780 mm Max. daylight between platens: 1400 mm Nwedpoydbbvjfx Af Nsb Ejector stroke: 250 mm Ejector force (fwd/rev): 95.4 / 48.6 kN Max. mould weight: 6700 kg Injection unit: Screw diameter: 80 mm Injection pressure: 1856 bar Shot volume: 1608 cm³ Shot weight (PS): 1464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional equipment: 2 x hydraulic nozzle control (GK) 2 x hydraulic core pull control – moving platen 1 x hydraulic core pull control – fixed platen Dosing unit colourant control 14 GK heating zones Electrical and general data: Pump motor power: 75 kW Installed heating capacity: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Sąlyga: naudotas, Gamybos metai: 2017, Ser.-No. 141342-100, Control system type Unilog B8, Clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mold installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mold weight 1,800 kg, min. mold dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection/metering unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2020, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564. Nsdpeyc Symefx Af Nswb This lot is part of an online auction. Award of contract subject to the approval of the client.

Sąlyga: naudotas, Gamybos metai: 2017, Serial no. 140228-100, Control system: Unilog B8, Clamping force: 1,800 kN, clear tie bar distance: 570 x 520 mm, mold height: 225 - 550 mm, opening stroke: 480 mm, max. daylight between platens: 1,030 mm, ejector stroke hydraulic/electric: 180/160 mm, ejector force: 40 kN, dry cycle time: 1.7 s per 364 mm, max. mold weight: 1,800 kg, min. mold dimensions: 346 x 346 mm, Injection unit: type 750, screw diameter: 45 mm, screw stroke: 200 - 225 mm, L/D ratio: 22, 2 hydraulic core pulls, calculated shot volume: 193 - 442 cm³, specific injection pressure: 1,714 - 3,000 bar, max. screw speed: 325 rpm, screw torque: 900 Nm, nozzle stroke/nozzle force: 350 mm/40 kN, Injection/dosing unit: manufacturer Wittmann, type Feedmax S3-NET, year 2017, Sprue picker/robot: manufacturer Wittmann, type WP80, year 2021, travel distances X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: manufacturer Metabo, type SA250, length 25 m, machine weight: 7,200 kg, operating hours: 17,844 This item is part of an online auction. Award is subject to the approval of the client. Njdpfsyc Stasx Af Nowb

Sąlyga: naudotas, Gamybos metai: 2017, Ser. No. 138524-100, Control system, type Unilog B8, clamping force 1,100 kN, clear tie bar spacing 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, min. mould dimensions 296 x 296 mm, injection unit type 350, screw diameter 25 mm, screw stroke 175 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 85.9 - 220 cm³, specific injection pressure 1,595 - 3,000 bar, max. screw speed 350 rpm, screw torque 340 - 500 Nm, nozzle stroke/nozzle force 250 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2018, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, L 25 m, machine weight 4,800 kg, operating hours 42,853 Nsdpfx Aeyc Sqxsf Nowb This item is part of an online auction. The sale is subject to the approval of the seller.

Sąlyga: naudotas, Gamybos metai: 2017, Ser.-No. 138522-100, Control system: Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke hydraulic/electric: 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimensions: 296 x 296 mm, Injection unit type: 750, Screw diameter: 35 mm, Screw stroke: 200 - 225 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 193 - 442 cm³, Specific injection pressure: 1,714 - 3,000 bar, Maximum screw speed: 325 rpm, Screw torque: 900 Nm, Nozzle stroke/force: 350 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Model Feedmax S3-NET, Year 2021. Sprue picker/robot: Manufacturer Wittmann, Model WP80, Year 2021, Travel axes X/Y/Z: 100 x 550 mm x 90°. Compressed air hose reel: Manufacturer Metabo, Model SA250, Length 25 m. Machine weight: 5,200 kg, Operating hours: 36,180. Nwedpfx Afsyc Snke Njb This item is part of an online auction. The final bid is subject to seller approval.

Sąlyga: naudotas, Gamybos metai: 2017, Ser.-No. 138264-100, control system, type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould size 346 x 346 mm, injection unit, type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, dosing unit, manufacturer Movacolor, injection/dosing unit, manufacturer Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot, manufacturer Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel, manufacturer Metabo, type SA250, L 25 m, machine weight 7,200 kg, operating hours 46,038. This item is part of an online auction. Sale is subject to the approval of the owner. Nwodpfx Afoyc Sh Do Njb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 43 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 194413, spaudimo jėga: 2 200 kN, varžto skersmuo: 55 mm, darbinio tūrio: 475 cm³, įpurškimo slėgis: 1 578 juosta, injekcijos svoris: 440 g, formos aukštis (min.): 300 mm, išstūmimo eiga: 180 mm, atvērimo eiga: 750 mm, bendras svoris: 12 740 kg, šildymo galia: 13,4 kW (18,22 AG), Here we, as a dealer for injection moulding machines, are offering the following well-maintained, used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines built in 2010 or later. We have been wholesale dealers in used injection moulding machines for over 25 years. Current Note – Tax Information and Benefit for Used Machines: As of 01.07.2025, used machines can also be subjected to a special depreciation rate of 30% per year for tax purposes. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 para. 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control: CC200 Year of manufacture: 2014 Machine number: 194413 Operating hours: 43,500 h Injection Unit Screw diameter: 55 mm Injection volume: 475 cm³ Shot weight: 430 g Heating capacity: 13.4 kW Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1179 bar – 1578 bar (increased) Clamping Unit Clamping force: 220 t / 2200 kN Nwsdeyc Ewxopfx Af Nsb Opening stroke: 757 mm Max. platen distance: 1050 mm Min. mould installation height: 300 mm Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Options: Core pull The machine is in excellent condition and can be inspected under power. Any peripherals shown in the images are NOT included in this offer! The machine is available immediately. Delivery terms: Free loading onto buyer's truck or delivery to customer’s site for reimbursement of transport costs. Additional information about our machines and company: - We only sell machines we have acquired from active production for our own inventory in Hanover. - All machines are tested and inspected before dismantling. - We DO NOT sell insolvency goods – we are NOT intermediaries dealing with third-party property. - All machines offered come from successful companies for whom maintenance and care are a given. - All listed machines are available for inspection at our warehouse.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 000 kN, Įranga: dokumentacija / vadovas, Uždarymo jėga: 100 t Sraigto skersmuo: 35 mm Atstumas tarp kolonų priekyje: 420 mm Atstumas tarp kolonų gale: 420 mm Šūvio tūris: 144 cm³ Tipas: Horizontalus Pavara: Hidraulinė Nsdpfxsycvw As Af Njwb Darbo valandos: 46 000

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Arburg 820S 4000-2100/400 / Production Line with Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection Unit: Screw diameter: 60 mm Shot weight: 723 g Injection pressure: 2500 bar Dosage volume: 792 cc Nwjdeyctzfepfx Af Njb Clamping Unit: Clamping force: 400 t Tie bar spacing: 820x820 mm Platen dimensions: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: 2K injection moulding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air valves x 6 Hydraulic core pullers with needle shut-off, controlled by proportional valve x 4 pairs Hot runner controller x 24 Reinforced injection unit – bimetallic Proportional valve on vertical injection unit – precise dosing Machine with six cylinders / accumulators with compressed nitrogen (additional charge for fast operation) Parallel movements Automatic mould height adjustment Screw diameter in vertical injection unit: ⌀40 mm - 184 g/PS Integrated pressure monitoring system by Kistler – mould cavity pressure measurement Original Weber rotary table: highly precise, electrically driven by a servomotor controlled via inverter Rotary table diameter: 1200 mm Rotary table available at extra cost Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: all axes driven electrically by servomotors (X, Y, Z telescopic) Approximate stroke: X - 5000 mm Y - 1400 mm Z - 2000 mm Automatic axis lubrication Touch control panel Robot safety package Robot with adapter and safety housing Robot available at extra cost Dimensions: Weight: 21,000 kg Length/Width/Height: 8.00x2.32x4.21 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the selected machine’s technical tests or participate in live technical demonstrations at our company in Łódź. Price: Upon request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, spaudimo jėga: 4 000 kN, Įranga: dokumentacija / vadovas, Valdymas: CC200 Metai: 2013 Uždarymo jėga: 400 t Didžiausias atstumas tarp plokščių: 1450 mm Formos aukštis min/maks: 450-1000 mm Išstūmėjo eiga: 250 mm Sraigto skersmuo: 70 mm (S8 sraigtas G1) Įpurškimo tūris: 1501 cm³ Įpurškimo kiekis: 319 cm³/sek Specifinis įpurškimo slėgis: 2252 bar Didžiausias sraigto apsisukimų skaičius: 160 aps./min Tipas: Horizontalus Pavara: Hidraulinė 2 šerdžių traukos 16 formų šildymo zonų 12 vandens kontūrų Euromap 67 Njdeyctyzspfx Af Nswb ECODRIVE ORO VOŽTUVAI

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of manufacture: 2011 Injection Unit: Screw diameter: 60 mm Shot weight: 607 g Injection pressure: 2000 bar Dosage volume: 664 ccm Clamping Unit: Clamping force: 320 t Tie bar spacing: 0x0 mm Platen size: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Nodpfx Afeyctyue Nswb Hybrid machine: high-speed, energy-efficient, and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 3 Control system with hot runner x 13 Injection unit hardened - bimetallic Main motor - servo motor driven by inverter Highly precise rotary table, servo motor-driven, controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to modify the injection unit for vertical operation Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All offered machines are started and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA – touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Hot runner control x 15 Injection unit hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for high-speed operation) ECO – the machine is equipped with a system for adjusting the minimum mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servo motors (electric); C-axis – pneumatic Nwodpfx Asyctyhef Neb Travel paths (axes): X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt, and protective enclosure Purchase of robot and conveyor belt available for an additional charge Dimensions: Weight: 12,510 kg Length/width/height: 6.57x1.76x2.46 m All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: Upon request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Arburg 570S 2200-290/100/100 / Production Line with Wittmann W823 Robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Nwodpjyctx Rofx Af Nob Injection pressure: 2000 bar Plasticizing volume: 144 cm³ Clamping Unit: Clamping force: 220 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional equipment: 3-component high-speed injection molding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 interface Robot interface 6x pneumatic valves 4x hydraulic core pulls, controlled by proportional valves Hot runner control Injection unit hardened – bimetallic Proportional valve on the injection unit – precise injection Machine equipped with two cylinders / compressed nitrogen accumulator (additional charge for fast operation) Machine designed for operation with an electric rotary table. The machine features an inverter for controlling the servomotor of the rotary table and an interface for table connection Parallel movements possible Screw diameter in vertical injection unit: ⌀25 mm – 45 g/PS Screw diameter in lateral injection unit: ⌀25 mm – 45 g/PS Wittmann W823 robot Year of manufacture: 2015 5-axis robot: 3 axes driven by servomotors (electric); axes C and movement A Travel distances per axis: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package included Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor available at extra charge Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53x1.77x3.29 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of Manufacture: 2011 Injection Unit: Screw Diameter: 50 mm Shot Weight: 359 g Injection Pressure: 2000 bar Dosing Volume: 392 ccm Njdpfx Aeyctw Tef Njwb Clamping Unit: Clamping Force: 200 t Tie Bar Distance: 570x570 mm Platen Size: 795x795 mm Ejector: electric Clamping System: toggle lever Control: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Controller with 12 hot runner zones Injection unit hardened - bimetallic Main motor - servo motor driven by inverter for energy saving Injection unit driven by a servo motor controlled by an inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for rapid operation) Central lubrication Parallel movements Arburg Multilift Select robot 6kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes with electric servo drives; C-axis pneumatic Stroke lengths: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt available at an additional cost Dimensions: Weight: 8,700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered undergo a start-up by our service technicians before sale. It is possible to receive a video of the technical test of the selected machine or participate in live technical testing at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Arburg 570C 2000-350/150 / Production line with lateral Arburg Multilift robot / 2K machine Year of manufacture: 2003 Injection unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2120 bar Dosage volume: 182 ccm Nsdpfxjyctwys Af Newb Clamping unit: Clamping force: 200 t Tie bar distance: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with lateral Arburg Multilift robot 2K machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner interface Reinforced injection units – bimetallic Proportional valves on injection units – for precise dosing Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All offered machines are started up by our service technicians before delivery. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: On request