TA Experts

Sąlyga: naudotas, mašinos/transporto priemonės numeris: NL250234, ašių konfigūracija: 1 ašis, pirmoji registracija: 10/1984, bendras ilgis: 12 450 mm, bendras plotis: 2 500 mm, pakaba: oras, padangos dydis: 235/70 R17.5, padang padangų: 80 procentas, ratų bazė: 7 400 mm, spalva: kitas, Gamybos metai: 1984,

Sąlyga: naujas, 5x5m Mezzanine Platform, Load Capacity: 500kg/sqm, Underside Height: 3m, Approx. 25sqm, Modular Platform System Specifications: - Length: approx. 5m - Width: approx. 5m - Underside platform height: approx. 3.00 m - Top edge platform height: approx. 3.38 m - Total area: approx. 25 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard P6, natural finish on top, white underneath - Support grid: 5.0m x 5.0m - NO CROSS BRACING, stabilisation via tie rods - Brand new ex works, freight cost depends on postal code Scope of delivery: - 02 x C profile 5000 mm, sendzimir galvanized - 08 x S profile 4800 mm, sendzimir galvanized - 04 x Support posts 3000 mm, RAL 7016 - 04 x Tie rods 3049 mm, RAL 7016 - 12 x Chipboard 2400 x 1000 x 38 mm, natural/white P6 - 04 x Foot plates for support posts - 04 x Anchor bolt sets for support posts OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING, TAILORED QUOTE UPON REQUEST. Price: Csdpfx Adox Dkwlsmeaa €5,288 net plus legally applicable VAT You will receive an invoice with VAT statement. Available as options upon request: - Impact protection - Handrail - Transfer station - Stairs - Floor anchors - Steel construction can be coated in your preferred RAL colour (standard is RAL 7016) Transport: Delivery can be arranged through our partner freight forwarder on request; shipping costs depend on the destination postcode. Installation: Our experienced staff are available to professionally assemble and disassemble your facility as required. Our recommendation: Let us know your requirements… We are happy to support you with your projects, from planning and ordering through to assembly.

Sąlyga: naujas, 10x10m mezzanine storage platform, load capacity: 500kg/sq.m, clearance under mezzanine: 3m, approx. 100 sq.m, modular system platform. Specifications: - Length: approx. 10m - Width: approx. 10m - Clearance below platform: approx. 3.0 m - Height above platform: approx. 3.38 m - Total area: approx. 100 sq.m - Load capacity: 500 kg/sq.m - Decking: 38 mm chipboard P6, natural finish top, white underside. - Support grid: 5.0m x 5.0m - NO CROSS BRACING, stiffening provided by beam struts. - New, direct from factory. Freight charges depend on postcode. Scope of supply: - 08 x C-profile 5000 mm, Sendzimir galvanized - 28 x S-profile 4800 mm, Sendzimir galvanized Csdpfsx Dkv Usx Admoaa - 09 x Column 3000 mm, RAL 7016 - 03 x Beam strut 3049 mm, RAL 7016 - 47 x Chipboard panels, 2400 x 1000 x 38 mm, natural/white, P6 - 09 x Base plates for columns - 09 x Anchor bolt sets for columns OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTE TAILORED TO YOUR REQUIREMENTS. Price: €13,167 net plus applicable VAT You will receive an invoice with shown VAT. Options on request: - Collision protection - Guardrails - Transfer station - Stairs - Floor anchors - Steel structure available powder-coated in a RAL colour of your choice (standard RAL 7016) Transport: Delivery can be arranged through our partner freight forwarder; costs are postcode-dependent. Assembly: Our trained staff is available on request to assist with the professional assembly and disassembly of your facility. Our recommendation: Let us know your requirements... We are happy to support you in the realization of your projects, from planning and ordering through to installation.

Sąlyga: naujas, 10x15m mezzanine platform, load capacity: 500kg/m². Underside clearance: 2.5m, approx. 150m² modular platform system. Specifications: - Length: approx. 10m - Width: approx. 15m - Underside height: approx. 2.5m - Topside height: approx. 2.88m - Total area: approx. 150m² - Load capacity: 500kg/m² - Decking: 38mm P6 chipboard, natural finish on top, white underside - Column grid: 5.0m x 5.0m - NO cross bracing, stabilization with roof ties - New from factory, plus freight (shipping costs depend on postal code) Scope of delivery: - 12 x C profile 5000mm, sendzimir galvanized - 40 x S profile 4800mm, sendzimir galvanized - 12 x columns 2500mm, RAL 7016 - 3 x roof ties 2517mm, RAL 7016 - 70 x chipboard panels 2400 x 1000 x 38mm natural/white P6 - 12 x base plates for columns - 12 x anchor bolt kits for columns Our design department will gladly provide you with a non-binding quote tailored to your requirements. Price: Cedpox Dkv Isfx Admsaa €18,198 net plus statutory VAT You will receive an invoice with VAT shown separately. Options available upon request: - Impact protection - Guardrails - Transfer station - Stairs - Floor anchors - Steel construction can be powder-coated in the RAL colour of your choice (standard RAL 7016) Transport: Delivery by our partner freight forwarder upon request, shipping costs depend on postal code. Installation: Our trained staff are available to professionally assemble and dismantle your facility upon request. Our recommendation: Let us know your exact requirements… We are happy to support you from planning through to ordering and installation, assisting with the realization of your projects.

Sąlyga: naujas, 5x10m storage mezzanine, load capacity: 500kg/sqm, underside: 3m, approx. 50sqm, system platform Specifications: - Length: approx. 5m - Width: approx. 10m - Underside of mezzanine: approx. 3.0 m - Top edge of mezzanine: approx. 3.38 m - Total area: approx. 50 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm particle board P6, natural on top, white underneath. - Column grid: 5.0m x 5.0m - NO CROSS BRACING, reinforcement by tie beam. - New goods ex works plus transport costs depending on postal code. Scope of delivery: - 04 x C-profile 5000 mm, Sendzimir galvanized. - 14 x S-profile 4800 mm, Sendzimir galvanized. - 06 x post 3000 mm, RAL 7016. - 03 x tie beam 3049 mm, RAL 7016. - 24 x particle board 2400 x 1000 x 38 mm, natural/white P6. - 06 x base plates for posts. - 06 x set of anchors for posts. OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING, NEEDS-BASED QUOTATION. Price: €7,840 net plus legally applicable VAT. You will receive an invoice showing VAT. Cedpfx Adox Dkvusmsaa Optional on request: - Collision protection - Guardrails - Transfer station - Stairs - Floor anchors - Steel structure can be coated in desired RAL color (standard RAL 7016). Transport: Delivery by our partner freight forwarder is available upon request; the costs depend on the postal code. Assembly: Our trained staff are happy to assist you with the professional installation and dismantling of your facility if required. Our recommendation: Let us know your requirements... We are happy to support you in the realization of your projects – from planning and ordering to installation.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 2 000 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 560 mm, kolonos skersmuo: 90 mm, darbinio tūrio: 442 cm³, įpurškimo slėgis: 1 646 juosta, injekcijos svoris: 400 g, formos aukštis (min.): 340 mm, išmetimo jėga: 16 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 790 mm, bendras ilgis: 5 552 mm, bendras plotis: 1 656 mm, bendras aukštis: 2 118 mm, bendras svoris: 8 200 kg, slėgis: 1 646 juosta, siurblio galia: 30 000 W, Parduodu pilnai veikiančią, nuolat gaminančią mašiną. Be Campetella roboto. Cajdpfxex Dkvhe Admea

Sąlyga: naujas, 10x10m Storage Mezzanine, Load Capacity: 500kg/sqm, Underside: 2.5m, Approx. 100 sqm Modular Platform Specifications: - Length: approx. 10m - Width: approx. 10m - Underside of platform: approx. 2.5m - Top edge of platform: approx. 2.88m - Total area: approx. 100 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard P6, top natural, bottom white - Support grid: 5.0m x 5.0m - NO cross bracing, stabilization via tie beam - Brand new ex-works, plus freight cost depending on postal code Scope of delivery: - 08 x C profile 5000 mm, Sendzimir galvanized - 28 x S profile 4800 mm, Sendzimir galvanized - 09 x support columns 2500 mm, RAL 7016 - 03 x tie beams 2517 mm, RAL 7016 - 47 x chipboards 2400 x 1000 x 38 mm natural/white P6 - 09 x footing plates for columns Cedox Dku Rspfx Admjaa - 09 x anchor sets for columns OUR DESIGN DEPARTMENT WILL GLADLY PROVIDE YOU WITH A NON-BINDING QUOTE TAILORED TO YOUR REQUIREMENTS. Price: €12,904 net plus applicable statutory VAT You will receive an invoice showing VAT separately. Options available on request: - Impact protection - Handrails - Transfer station - Stairs - Floor anchors - Steel structure can be powder coated in the RAL color of your choice (Standard: RAL7016) Transport: Delivery can be arranged via our partner freight forwarder upon request. Costs depend on the destination postal code. Installation: Our trained personnel are available for professional assembly and disassembly of your facility if required. Our recommendation: Share your requirements with us… We are happy to assist you with your projects, from planning and ordering to installation.

Sąlyga: naujas, 5x5m Mezzanine Platform, Load Capacity: 500kg/sqm, Underside Height: 2.5m, Approx. 25sqm System Platform Specifications: - Length: approx. 5m - Width: approx. 5m - Underside of platform: approx. 2.5m - Top edge of platform: approx. 2.88m - Total area: approx. 25sqm - Load capacity: 500 kg/sqm - Deck: 38mm chipboard P6, natural finish on top, white underneath - Post grid: 5.0m x 5.0m - NO CROSS BRACES, bracing via knee brace - New, ex works, plus freight (cost depending on postal code) Scope of delivery: - 02 x C-profile 5000mm, sendzimir galvanized - 08 x S-profile 4800mm, sendzimir galvanized - 04 x column 2500mm, RAL 7016 - 03 x knee brace 2517mm, RAL 7016 - 12 x chipboard panels 2400 x 1000 x 38mm, natural/white P6 - 04 x base plates for columns - 04 x anchor bolt set for columns OUR DESIGN DEPARTMENT WILL GLADLY PROVIDE YOU WITH A NON-BINDING, CUSTOMIZED QUOTE ACCORDING TO YOUR REQUIREMENTS. Price: €4,988 net plus statutory VAT. You will receive an invoice with VAT shown separately. Optional, on request: - Impact protection - Guard rail - Transfer station - Stairs - Floor anchors - Steel structure can be coated in your desired RAL color (standard RAL 7016) Transport: Cedpfx Asx Dkuwodmeaa Delivery can be arranged through our partner freight forwarder upon request. Shipping costs depend on postal code. Installation: Our trained staff is available to assist you with the professional assembly and disassembly of your company equipment. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Sąlyga: naujas, Mezzanine platform built to your specifications! Load capacity: 250 - 1,000 kg/m² Why choose mezzanine platforms from BLT Lagertechnik? - We are a family-owned business: We aim for long-term partnerships. - We are specialists: We accommodate all spans, loads, and levels of complexity. - We care: Our cold-formed system is the most sustainable solution available. Scope of delivery: - Columns - Main beams - Secondary beams - Flooring panels - Assembly materials and installation manual Optional upon request: - Impact protection - Railings - Transfer stations - Stairs - Floor anchors - Steel structure can be coated in your desired RAL colour (standard: RAL 7016) Transport: Delivery is handled by our partner shipping company upon request; cost depends on postal code. Installation: Our trained personnel are available to professionally install and dismantle your equipment if required. Codpfex Dkuqsx Admjaa Our recommendation: Let us know your requirements... We are happy to assist you in realising your projects—from planning and ordering to installation.

Sąlyga: naujas, 10x20m Mezzanine Platform, Load Capacity: 500kg/sqm, Underside Height: 3m, approx. 200 sqm, Modular System Platform Specifications: - Length: approx. 10m - Width: approx. 20m - Underside platform height: approx. 3.0 m - Top of platform: approx. 3.38 m - Total area: approx. 200 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm P6 chipboard, natural on top, white underneath - Support grid: 5.0m x 4.0m - NO CROSS BRACING, reinforcement via dome strut - Brand new ex works, plus freight depending on postal code Scope of delivery: - 20 x C profile 4000 mm, Sendzimir galvanized - 52 x S profile 4800 mm, Sendzimir galvanized - 18 x Columns 3000 mm, RAL 7016 - 3 x Dome strut 3049 mm, RAL 7016 - 93 x Chipboard panels 2400 x 1000 x 38 mm, natural/white P6 - 18 x Base plates for columns - 18 x Anchor bolt sets for columns OUR PLANNING DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING QUOTE TAILORED TO YOUR REQUIREMENTS. Price: €20,938 net Plus applicable statutory VAT. You will receive an invoice with itemized VAT. Optional on request: - Collision protection - Guardrail - Transfer station - Stairs - Floor anchors - Steel structure can be powder-coated in the RAL color of your choice (standard RAL 7016) Caedpfjx Dkukex Admoa Transport: Delivery is available on request via our partner carriers. Costs depend on postal code. Assembly: Our trained staff are available upon request to assist with the professional assembly and disassembly of your facility. Our Recommendation: Let us know your requirements... We are happy to assist you with your projects—from planning and ordering to assembly.

Sąlyga: geras (naudotas), 1 x Food Truck Automobilio matmenys: ilgis 4,7 metro. Vidiniai darbastaliai – du po 600 mm, iš abiejų pusių po 2 šaldytuvus/šaldiklius. Maistui tinkamo nerūdijančio plieno darbastaliai, įskaitant elektros jungtį ir praustuvą. Sunkvežimis yra elektrinis – gali būti įvažiuojamas į reikiamą vietą savo eiga, taip pat turi priekabos bokštą tempimui, tačiau atvykus į vietą gali būti pastatytas pasinaudojus elektriniu varikliu. Codpfsx Dkudsx Admjaa

Sąlyga: naujas, bendras ilgis: 5 000 mm, bendras plotis: 4 250 mm, 21.25 m² Mezzanine Storage Platform, Top Edge 300 cm, 500 kg/m² load capacity, immediately available from stock, suitable for pallet jacks, modular platform system, steel mezzanine, storage level Specifications: - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Additional flooring overhang: 200 mm - Supports, cross braces & tie rods powder-coated in RAL 7016 - Main & secondary beams galvanized - Flooring: 38 mm chipboard P6, top natural & bottom white - Brand new, in stock in Wietmarschen - IMMEDIATELY AVAILABLE The storage platform consists of: - 04 x supports - 02 x main beams C+350 - 06 x secondary beams S+260 - 01 x cross bracing - 02 x tie rods Csdpox Dkt Tefx Admeaa - 10 x chipboard panels - Includes connecting materials & bolts -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €2,590.00 net €3,082.10 gross You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner shipping company on request. Costs are based on postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements… We’re happy to support your projects from planning and ordering through to installation. Interested or have questions? Simply contact us by message or phone. Our phone number is on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we’ll call you back as soon as possible.

Sąlyga: naujas, 5x15m mezzanine storage platform, load capacity: 500kg/sqm, lower edge: 3m, approx. 75sqm, modular system platform Specifications: - Length: approx. 5m - Width: approx. 15m - Underside height: approx. 3.0m - Top edge height: approx. 3.38m - Total area: approx. 75 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard P6, natural finish on top, white underneath - Column grid: 5.0m x 5.0m - NO CROSS BRACES, reinforced with horizontal ties - New goods ex works, plus freight depending on postal code Scope of delivery: - 06 x C-section 5000 mm, Sendzimir galvanized - 20 x S-section 4800 mm, Sendzimir galvanized - 08 x column 3000 mm, RAL 7016 - 03 x horizontal tie 3049 mm, RAL 7016 - 24 x chipboard 2400 x 1000 x 38 mm natural/white P6 - 08 x baseplates for columns - 08 x anchor bolt sets for columns OUR DESIGN DEPARTMENT WILL GLADLY PREPARE A NON-BINDING OFFER TAILORED TO YOUR REQUIREMENTS. Caodsx Dkt Hjpfx Admoa Price: €9,913 net plus legally valid VAT You will receive an invoice stating VAT separately. Optional on request: - Collision protection - Railings - Transfer station - Stairs - Floor anchors - Steel structure can be finished in any desired RAL color (standard RAL 7016) Transport: Delivery can be arranged via our partner forwarding agents upon request. Costs depend on postal code. Assembly: Our trained staff is happy to assist you with the professional installation and dismantling of your facility. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and order processing through to assembly.

Sąlyga: naujas, 10x15m mezzanine platform, load capacity: 500kg/sqm, lower edge: 3.0m, approx. 150sqm modular platform Specifications: - Length: approx. 10m - Width: approx. 15m - Lower edge of platform: approx. 3.0m - Upper edge of platform: approx. 3.38m - Total area: approx. 150 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm thick P6 chipboard, natural finish on top, white on the bottom. - Support grid: 5.0m x 5.0m - NO CROSS BRACING, reinforced with tie beam. - New from factory, plus freight charges depending on postal code. Scope of delivery: - 12 x C-profile 5000 mm, Sendzimir galvanized. - 40 x S-profile 4800 mm, Sendzimir galvanized. - 12 x Column 3000 mm, RAL 7016. - 03 x Tie beam 3049 mm, RAL 7016. - 70 x chipboard panels 2400 x 1000 x 38 mm, natural/white P6. - 12 x base plates for columns. - 12 x sets of anchor bolts for columns. OUR DESIGN DEPARTMENT WILL GLADLY PROVIDE YOU WITH A NON-BINDING, CUSTOMIZED QUOTATION BASED ON YOUR REQUIREMENTS. Price: €18,525 net plus applicable VAT. You will receive an invoice with VAT shown separately. Optional upon request: - Impact protection Caedpox Dkttofx Admoa - Railings - Transfer station - Stairs - Floor anchors - Steel structure can be powder-coated in your desired RAL colour (standard RAL 7016). Transport: Delivery can be arranged by our partner freight forwarder, with shipping costs depending on your postal code. Installation: If required, our trained personnel will be happy to assist you with the professional installation and dismantling of your facility equipment. Our recommendation: Let us know your requirements... We are happy to support you in realizing your projects – from planning and ordering through to installation.

Sąlyga: naujas, 10x25m Storage Platform, Load Capacity: 500kg/sqm, Clearance: 3.0m, Approx. 250sqm Modular Mezzanine Specifications: - Length: approx. 10m - Width: approx. 25m - Clearance below platform: approx. 3.0m - Top edge of platform: approx. 3.38m - Total area: approx. 250 sqm - Load capacity: 500 kg/sqm - Decking: 38 mm chipboard, type P6, natural finish on top, white underside - Column grid: 5.0m x 4.15m - NO CROSS BRACING, stabilization via lateral strut - Brand new, ex works, plus freight according to destination postal code Scope of supply: - 020 x C-profile 4150 mm, Sendzimir galvanized - 004 x C-profile 4250 mm, Sendzimir galvanized - 066 x S-profile 4800 mm, Sendzimir galvanized - 021 x column 3000 mm, RAL 7016 Cedpjx Dktmsfx Admjaa - 004 x lateral strut 3049 mm, RAL 7016 - 0116 x chipboard 2400 x 1000 x 38 mm natural/white P6 - 021 x base plates for columns - 021 x anchor bolt sets for columns OUR DESIGN DEPARTMENT WILL BE HAPPY TO PROVIDE YOU WITH A NON-BINDING, CUSTOMIZED QUOTE ACCORDING TO YOUR REQUIREMENTS. Price: €26,487 net plus statutory VAT You will receive an invoice with VAT stated separately. Options on request: - Impact protection - Guard rails - Transfer station - Stairs - Floor anchors - Steel structure can be powder-coated in your desired RAL shade (standard is RAL 7016) Transport: Delivery can be arranged on request by our partner forwarding agent. Shipping costs depend on the destination postal code. Assembly: Our trained personnel are available to professionally install and dismantle your equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in the realization of your projects, from planning to ordering to installation.

Sąlyga: naujas, Gamybos metai: 2025,

Sąlyga: naujas, Cantilever Rack Double-Sided New Specifications: - Height: approx. 400 cm - Width: approx. 256 cm - Length: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle distance: approx. 131 cm - New item from factory - Double-sided - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 4 storage levels (5 storage levels in total) - Delivery time approx. 4 weeks Rack consists of: - 15 x double-sided uprights incl. base, approx. 400 cm made from IPE 160 steel - 120 x cantilever arms approx. 120 cm made from IPE 80 steel, without stop end - Incl. all necessary connectors and bolts Why Choose BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the rack uprights and arms are statically verified at 100% loading. - All racking systems supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, will not rust like painted systems. Consistent appearance for many years. - We use legally compliant hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term spare parts availability guarantee - Upright base and rear are welded together for additional safety and shorter assembly times – no need to bolt the feet to the upright backs. - Bracing made from angle steel, so no adjustment by turnbuckles necessary, reducing assembly time. - No slotted hole system, so no weakening of the upright profile. Price: €12,450.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery by our partner forwarding agent on request. Costs depend on postal code. Assembly: Our trained personnel are available to professionally assemble and dismantle your equipment as needed. Codpfjx Dkr Asx Admjaa Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering through to assembly.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, bendras svoris: 1 000 kg, bendras ilgis: 6 000 mm, Tiltinis kranas ABUS - VS 1t x 6000 MACH-ID 9307 Gamintojas: ABUS Tipas: VS 1t x 6000 Cedpsx Dkrvofx Admeaa Atkreipkite dėmesį: Informacija šiame puslapyje buvo pateikta remiantis mūsų geriausiomis žiniomis ir, kiek įmanoma, gauta iš gamintojo. Informacija pateikiama sąžiningai, tačiau tikslumo garantuoti negalime. Todėl jos nelaikykite oficialiomis ar sutartinėmis sąlygomis. Rekomenduojame patikrinti visą svarbią informaciją.

Sąlyga: naujas, Gamybos metai: 2020, Cantilever Racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Centre distance: 131 cm - NEW - immediately available from stock. - 750 kg load per arm - 2250 kg load per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) Rack consists of: - 04 x uprights, incl. base approx. 300 cm made from IPE160 - 12 x cantilever arms approx. 120 cm made from IPE 100 - Incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racking? - Certified German manufacturer in accordance with DIN EN 1090 - Made in Germany - All specified load capacities of uprights and arms are statically verifiable at 100% capacity - All racks supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use without rusting unlike painted racks. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term post-purchase guarantee - The upright base and upright rear are welded together, providing added safety and fast installation since the feet do not need to be bolted to the rear Caedpfox Dkrpex Admsa - Bracing made from angle steel, so no adjustment via turnbuckles is necessary. This reduces installation time. - No slotted hole system, preventing weakening of the upright profile Price: €2,404.00 net + applicable VAT. You will receive an invoice with VAT shown. Accessories such as floor anchors, collision protection, etc. are also available from us. Transport: Delivery available through our partner shipping company on request; cost depends on postcode. Assembly: Our trained staff are happy to professionally assemble and dismantle your equipment if required. Our recommendation: Tell us your requirements ... We are happy to assist you with your project, from planning and ordering to installation.

Sąlyga: naujas, Cantilever racking systems made to measure! Ideal for storing long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system, allowing you to add components as your needs develop. Perfect for offcuts or long materials in metalworking and woodworking operations. Cjdpox Dkrcjfx Admsaa Why choose BLT Cantilever Racks? • Certified German manufacturer according to DIN EN 1090 – Made in Germany • All stated load capacities for uprights and arms are statically verified at 100% load! • All rack systems are supplied in hot-dip galvanized finish, allowing for indoor and outdoor use without risk of corrosion as with painted racks. Consistent appearance for many years. • We use legally required hot-dip galvanized bolt sets pursuant to DIN EN 15048-1 • We use legally required load signs type C4 according to DIN EN 15635 / BGR 234 • Long-term spare parts availability guaranteed • Upright base and upright spine are welded together for added safety and reduced assembly times, as the base does not need to be bolted to the spine. • Bracing made from angle steel – no tension rods needed, shortening installation times. • No slotted hole system – no weakening of the upright profile. Transport: Delivery is available via our partner freight forwarder; costs depend on postcode. Assembly: Our trained staff are available on request to professionally assemble and disassemble your warehouse equipment. Our recommendation: Let us know your requirements… We are happy to support your project from planning and ordering through to installation. Interested or have questions? Simply contact us by message or phone. Our telephone number is listed on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Sąlyga: naujas, Gamybos metai: 2022, Cantilever Racking NEW STOCK Caodpfsx Dkq Sox Admoa Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW STOCK, immediately available from stock. - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (total 4 storage levels) Rack includes: - 4 x uprights incl. base, approx. 350 cm made from IPE160 - 12 x cantilever arms, approx. 120 cm made from IPE 80 - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All stated load capacities for uprights and cantilever arms are statically proven at 100% load. - All rack systems are supplied hot-dip galvanized, suitable for both indoor and outdoor use, and do not rust like painted systems – ensuring consistent appearance for many years. - We use the legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long purchase guarantee - Upright base and upright rear are welded together for additional safety and reduced assembly times, as the bases do not need to be bolted separately to the uprights. - Bracing made of angle steel, so no adjustment using turnbuckles is necessary, which reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,356.00 net + legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partner freight forwarder, costs are dependent on postal code. Assembly: Our trained personnel are happy to assist you with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects – from planning to ordering to installation.

Sąlyga: naujas, Gamybos metai: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 350 cm Caedjx Dkq Eopfx Admsa - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW STOCK, immediately available from stock. - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (total 4 storage levels) Rack includes: - 4 x uprights incl. base, approx. 350 cm made from IPE160 - 12 x cantilever arms, approx. 120 cm made from IPE 80 - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All stated load capacities for uprights and cantilever arms are statically proven at 100% load. - All rack systems are supplied hot-dip galvanized, suitable for both indoor and outdoor use, and do not rust like painted systems – ensuring consistent appearance for many years. - We use the legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long purchase guarantee - Upright base and upright rear are welded together for additional safety and reduced assembly times, as the bases do not need to be bolted separately to the uprights. - Bracing made of angle steel, so no adjustment using turnbuckles is necessary, which reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,356.00 net + legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partner freight forwarder, costs are dependent on postal code. Assembly: Our trained personnel are happy to assist you with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects – from planning to ordering to installation.

Sąlyga: geras (naudotas), Gamybos metai: 1996, gerklės gylis: 2 070 mm, gręžimo pajėgumas: 50 mm, veleno greitis (maks.): 800 aps./min, Gręžimo našumas pliene (skersmuo): 50 mm Caedpjx Dkqxofx Admea Iškyša: 2070 mm Sukimosi greitis: 800 aps./min Bendras galios poreikis: 8 kW Apytikslis staklių svoris: 6 t Reikalinga erdvė apytiksliai: 3,5 x 1,5 x 3,0 m

Sąlyga: naujas, Gamybos metai: 2020, Cantilever Racking NEW STOCK Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Arm length: approx. 120 cm - Bay width: 131 cm - NEW STOCK, available immediately from our warehouse. - 750 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels in total) Racking consists of: - 4 x uprights, incl. base, approx. 416 cm, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE 100 - All necessary connecting elements and bolts included Why choose BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All stated load capacities for uprights and cantilever arms are statically verified at 100% capacity. - All racking systems are supplied in hot-dip galvanized finish, suitable for indoor and outdoor use, with long-term corrosion protection, unlike painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized screw sets according to DIN EN 15048-1 - Extended spare parts availability guarantee - Base and rear of upright welded together for added safety and reduced assembly time, as the base does not require separate bolting. - Bracing made from angle steel, eliminating the need for tension rods and thereby shortening installation time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,631.00 net Casdpfx Aox Dkqrodmsa plus statutory VAT. You will receive an invoice showing the VAT separately. Accessories such as floor anchors, collision protection, etc. can also be purchased from us. Our recommendation: Let us know your requirements... We are happy to assist you with your projects – from planning and ordering to installation. Affordable delivery available on request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, bendras svoris: 1 000 kg, bendras ilgis: 4 250 mm, Tiltinis kranas ABUS - VS 1t x 4250 MACH-ID 9308 Gamintojas: ABUS Cedex Dkqlspfx Admoaa Tipas: VS 1t x 4250 Atkreipkite dėmesį: Informacija šiame puslapyje buvo pateikta pagal mūsų geriausias žinias ir galimybes, taip pat, kiek įmanoma, gauta iš gamintojo. Informacija pateikta sąžiningai, tačiau tikslumas nėra garantuojamas. Todėl tai nėra pasiūlymas ar sutarties sąlyga. Rekomenduojame patikrinti visą svarbią informaciją.