APS Europe Automation B.V.

Sąlyga: labai geros būklės (naudotas), Alzmetall AC 25 stulpinė gręžimo staklė, pagaminimo metai 1992. Labai gera būklė, galima apžiūrėti prijungus prie elektros. Njdpfjx Sqv Hjx Af Ijcl

Sąlyga: geras (naudotas), Gamybos metai: 2000, Gręžimo įrenginys SUHER Power master, pagaminimo metai 2000. Nodpfx Aexr Dlxsf Iscl

Sąlyga: geras (naudotas), Gamybos metai: 2000, Gręžimo mazgas SUHNER Mono master Tipas: BEM12 ST25 1040, metai: 2000, su Siemens varikliu. Ncedpfxoxr Dk Ue Af Ijl

Sąlyga: geras (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 300 mm, bendras ilgis: 5 000 mm, bendras aukštis: 1 980 mm, bendras svoris: 450 kg, veleno greitis (min.): 30 aps./min, veleno greitis (maks.): 2 400 aps./min, X ašies eiga: 300 mm, Y ašies eiga: 4 000 mm, kolonos skersmuo: 140 mm, gręžimo gylis: 175 mm, valdiklio modelis: Siemens S7-1200 mit 7" Farb-Touchdisplay, pavaros tipas: Servomotoren, matavimo diapazonas X ašis: 4 000 mm, įprasta gręžimo galia: 45 mm, sriegio pjovimo pajėgumas: M 36, The drilling automaton can be operated manually and fully automatically. After each drilling operation, the drill moves in the X and Y axis fully automatically to the next drilling position, enabling automatic drilling sequences. UNIMAX 4 Column Drilling Machine Powerful, universally applicable column drilling machine with infinitely variable feeds and spindle speeds. Cycle programming possible for complex workflows, chip breaking, chip removal, LCD graphics with operator guidance, digital display for speed, drilling depth, and feed, automatic spindle alignment for tool removal, electric drill guard. Technical Data: - Continuous drilling capacity: 40 mm* - Standard drilling capacity: 45 mm* - Thread cutting capacity: M36 - Spindle: MK 4 Ncjdpfxowfd Ayo Af Iol - Drilling depth: 175 mm - Throat: 300 mm - Spindle/Table distance: 70 to 825 mm - Table size: 650 x 500 mm - T-slots to DIN 650: 14 mm - Column diameter: 140 mm - Overall height: 1,980 mm - Weight: 475 kg - Feed rate: 30 to 1,650 mm/min - Frequency-controlled three-phase motor: 7.5 kW - Infinitely variable spindle speeds: 30 – 2,400 rpm - Operating voltage: 400 V - Frequency: 50 Hz - Mains protection: 16 A - Protective contact – plug and connection cable included; connection only to a VDE 0100-compliant network with a functioning protective conductor - RCD (FI) switch over 100 mA - Noise level at idle at maximum spindle speed Accessories • Turret head • Drill guard for uni 4+BS 50 • Anti-twist device • Motorized height adjustment • Gas spring relief 25 kg • Flange quill MK4 • Automatic turret head ARBO 20 with 6 mounting holes • Gear motor A20 • MK4 drive arbor • Collet for attaching drill head to the machine • A20 thread cutting spindle for quick-change adapters SWE 1, 1:1, M3-M16 with l.a. • Quick-change adapter for taps SWE 1 • Work spindle 1:1 with quick-change chuck • Bilz ASR 25 • Clamping range with ER25, up to D16mm • Tool holder for quick-change chuck • Pneumatic vise, clamping width: 300 mm MORE PICTURES ON REQUEST

Sąlyga: naudotas, Gamybos metai: 2001, Drilling capacity in steel (diameter): 32 mm Throat depth: 322 mm Drilling stroke: 180 mm Table size: 500 x 370 mm Spindle mount: Morse taper 4 (MT 4) Nsdpfou Rt Iuox Af Iecl Spindle speed range: 55–5000 rpm Controller: Special software Total power requirement: 3 kW Machine weight: approx. 0.52 t Space requirement: approx. 1 x 1 x 2.35 m Column drilling machine with ARBO 20 turret head attachment. Spare parts are included with the machine.

Sąlyga: naudotas, Gamybos metai: 1984, Drilling capacity in steel (diameter): 30/35 mm Throat depth: 300 mm Quill stroke: 140 mm Nsdeu Rt Hqjpfx Af Ijcl Table size: 700 x 500 mm Spindle taper: MT 3 Spindle speed range: 65 – 1,750 rpm Total power requirement: 1.7 kW Machine weight approx.: 0.7 t Space requirement approx.: 1 x 1 x 2 m Column drilling machine

Sąlyga: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 18 300 mm, padavimo eiga Y ašimi: 1 000 mm, bendras ilgis: 20 500 mm, gręžimo pajėgumas: 50 mm, bendras aukštis: 2 560 mm, bendras plotis: 3 500 mm, plunksnos brūkšnys: 330 mm, ruošinio svoris (maks.): 1 088 kg, stalo plotis: 1 000 mm, stalo ilgis: 18 300 mm, 2005 Peddinghaus Avenger MDL1000/B CNC Balkenbohrlinie Maschinentyp: Einspindelige CNC-Balkenbohrlinie Steuerung: Siemens Sinumerik Baujahr: 2005 Zustand: Gut. Im laufenden Betrieb vorführbar Inklusive: 60 Fuß (18,3 m) Zuführtisch Technische Daten: Max. Profilgröße: 60 Fuß x 40" (18,3 m x 1000 mm) Max. Profilgewicht: 730 lbs/ft (1088 kg/m) Min. Bohrdurchmesser: 1/4" (6,5 mm) Max. Bohrdurchmesser: 2" (50 mm) Max. Materialstärke: bis 10" (250 mm) Max. Verfahrgeschwindigkeit X-Achse: 120 ft/min (37 m/min) Max. Verfahrgeschwindigkeit Y-Achse: 120 ft/min (37 m/min) Spindelleistung: 13 3/4 HP (10 kW) Bohrvorschub: 2" – 10"/min (50 – 254 mm/min), stufenlos regelbar Spindelhub: max. 13" (330 mm) Gesamtleistung: 20 HP (14,9 kW) Stromversorgung: 400 V, 3-phasig, 50 Hz Durchschnittliche Bohrleistung: 200–400 Löcher pro Stunde (abhängig vom Profil) Nedpfx Asu Nyg Usf Iecl Platzbedarf ca.: 20,5 x 3,5 m Maschinenhöhe: 2,56 m

Sąlyga: naudotas, Gamybos metai: 1993, Technical details: Maximum workpiece thickness: 80 mm Minimum workpiece thickness: 5 mm Plate size without repositioning: 2000x1000 mm Minimum plate size: 100x100 mm Longitudinal travel (X-axis): 2800 mm Transverse travel (Y-axis): 1000 mm Control: CNC Mubea Matic100 Hole diameter min/max: 10/40 mm Tool holder: Taper DIN 6327 Drill spindle stroke: max. 150 mm Positioning accuracy: +/- 0.5 mm Spindle speeds: 112-180-224-280-355-560 rpm Travel speed: 80 m/min Feed length: max. 150 mm Rapid traverse: 8 m/min Work table: L:2500 mm; W:950 mm Workpiece weight: 750 kg Deburring unit max.: d=40 mm Working height: 1050 mm Gripper unit: 4 pcs Gripper opening min/max: Type I: 5/45 mm Gripper opening min/max: Type II: 45/85 mm Compressed air connection: 6 bar Total power requirement: 30 kW Machine weight approx.: 5.5 t Required floor space (LxWxH): approx. 5.0 x 5.5 x 2.7 m (depending on installation) 2-axis CNC controlled plate drilling system for the automatic processing of sheet metal and flat materials Comprises: machine body, Y-axis travel unit, X-axis travel unit, positioning unit, deburring unit, drilling unit, material support tables, hydraulic unit, and control system Further technical details: - Processing of plate size up to 1000x4000 mm possible by repositioning! - Material support tables with support elements, guide rails for guiding and transporting the positioning carriage (approx. L:2500 x W:950 mm, load capacity approx. 750 kg) - Drill cooling via compressed air Nedpfxou Id Ruo Af Iscl - Control for 2-axis positioning: X-axis 80 m/min, Y-axis 30 m/min - Control has a storage capacity of approx. 10,000 programs Equipment: - 1 positioning carriage, 2 material support tables, full material line - Switch cabinet, operator's panel, rack, deburring unit - CNC screen control Accessories: - Roller conveyor 1800x1000 mm and roller conveyors 2x1000 mm The machine is available for sale, ready for transport from Leipzig.

Sąlyga: naudotas, TECHNICAL DATA Ncjdpfx Aeuhabtjf Iol - Spindle speed: 400 - 4,500 rpm - Drilling capacity in steel / cast iron: 10 / 13 mm - Drilling depth: 60 mm - Spindle-to-column distance: 185 mm - Usable table area: 220 x 300 mm - Motor power: 0.5 kW - Supply voltage: 220 V - Speed selection via indication of drill diameter and material - Electronic spindle speed control - Stepless spindle speed adjustment between 400 and 4,500 rpm - Constant speed during load - Adjustable drill head height via pneumatic compensation system - Fine drilling depth adjustment via graduated vernier scale - Electronic motor protection - Base plate fully machined (220 x 300 mm)

Sąlyga: naudotas, TECHNICAL DATA Njdpfx Aouhabgjf Iscl See photos

Sąlyga: naudotas, Technical Data: See photos. Ncjdpfjuhabaox Af Ijl

Sąlyga: naudotas, Gamybos metai: 2019, veikimo valandos: 12 000 h, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 24 000 mm, padavimo eiga Y ašimi: 450 mm, padavimo ilgis Z ašis: 1 000 mm, X ašies padavimo greitis: 400 m/min, Y ašies padavimo greitis: 400 m/min, padavimo greitis Z ašis: 400 m/min, bendras ilgis: 28 000 mm, gręžimo pajėgumas: 40 mm, greitas poslinkis X ašimi: 10 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 10 m/min, įvesties srovės tipas: trifazis, valdymo spintos plotis: 1 620 mm, valdymo spintos ilgis: 450 mm, bendras aukštis: 3 400 mm, bendras plotis: 2 600 mm, valdymo spintos aukštis: 2 200 mm, bendras svoris: 11 200 kg, ruošinio svoris (maks.): 8 000 kg, pozicionavimo tikslumas: 1 mm, veleno greitis (min.): 200 aps./min, sukimosi greitis (maks.): 4 000 aps./min, veleno greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 200 aps./min, X ašies eiga: 600 mm, stalo plotis: 1 000 mm, gręžimo skersmuo: 40 mm, suslėgto oro jungtis: 8 juosta, vynų diametras: 108 mm, stalo ilgis: 1 000 mm, stalo aukštis: 710 mm, galia: 21 kW (28,55 AG), Įranga: sūkių greitis be galo kintamas, Completely automatic drilling-sawing line for profiles APS Europe profile steel drilling machine RDR-1036 and Bandsaw RS-1300 Increase your productivity with this complete automatic drilling-sawing line for steel profiles. Designed for efficient and precise processing of various profile steel materials. The price is excluding dismantling, assembly, transport, and import duties. Please contact us for more information about this machine. Ncedpfetnf Iyjx Af Isl

Sąlyga: geras (naudotas), Multi-spindle head, multi-spindle drilling head, drilling gearbox, automatic feed drill - Manufacturer: Desoutter, AFD – Automatic Feed Drills and Tapping Machines - Model: AFDE-40 - Speed: 3800 rpm - Multi-spindle head: Desoutter Type 174183, center distance 10 to 67 mm - Motor: ABB 0.33 kW - Integrated collets: Ø 3 mm - Quantity: 1 unit available Ncjdpjra Rntofx Af Iel - Dimensions: 890/220/H150 mm - Weight: 12 kg

Sąlyga: geras (naudotas), 12-head drilling machine for sale, Table size: 400 x 360 mm Nodpjpy D Dwofx Af Iocl

Sąlyga: naujas, Gamybos metai: 2023, Tube Drilling / Angular Drilling Machine, Drill Automation TDM100 2D AT - automatic with two opposing drilling units - Minimal quantity lubrication - Manual material clamping - Automatic feed and automatic tube rotation - Max. tube length: 3,000 mm - Positioning accuracy: +/- 0.2 mm - Drilling unit power: 2 x 2.2 kW - Material loading and removal by hand - Drill heads swiveling +/- 50° - Manual 360° swivel mechanism Ncedpfx Aelgzytjf Isl - Motor speed: 295 - 2,950 rpm - Operation via touch panel - Up to 100 positions programmable - Drilling unit lighting - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profiles up to 100 x 100 x 12 mm - L-profiles up to 100 x 100 x 8 mm - Double posts up to 100 x 15 mm - Flow drilling up to M12 - Drilling diameters up to Ø 50 mm

Sąlyga: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head Ncedpfx Aelgvkisf Ijl IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Sąlyga: naudotas, High-Performance Drilling Machine ALZMETALL Type Abomat 20 Production Drilling Machine Serial No.: 452 Year of Manufacture: 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle taper: SK 40 - M16 Arm length: 280 mm Drill slide stroke: 500 mm Distance spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, stepless Drill slide feed: 20 - 224 mm/min, stepless Drill slide rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed: 1000 rpm) Power supply: 400 V, 50 Hz - Stepless spindle speed via frequency converter - Stepless drill slide feed via frequency converter - 2 operating modes: setup and automatic - Centralized lubrication - Control cabinet at the rear of the machine - Swivelling control panel - Mounted on steel plate (700 x 650 x 40 mm) with precision height adjustment Ncedpfx Ajikrtqof Iol Space requirement (L x W x H): 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Sąlyga: naujas, Gamybos metai: 2024, SEMI-AUTOMATIC DRILLING SYSTEM “UNIBOHRFIX 50” With the UniBohrFix 50 drilling system, all profiles can be processed either against a stop or using the gripper clamp. Drilling is performed manually via a lever, while materials are automatically positioned to the next drilling location along the X-axis. Conveniently execute entire drilling programs, or use the stop plate for rapid single hole operations. The system is suitable for weights up to 100 kg. Additionally, the unit includes a minimum quantity spray unit with holder and spray can. For technical specifications of the standard version, refer to the table. All system components can be configured to your requirements. You may choose from various drill units, roller conveyors, positioning systems, and vices. Plantec configures the system to fit your needs perfectly! ADVANTAGES - Series of holes are drilled at precise intervals automatically. - Operating errors are drastically reduced. - Programming takes only a few minutes. - Excellent price-performance ratio. - Significant reduction in required labor. Standard measuring lengths: 3,000 mm 6,000 mm Drill unit: Unimax 2 T Spindle: MK2 Continuous drilling capacity: 18 mm Speed ranges: 100-2000 rpm, 200-4000 rpm Ncodpfx Ajgwt Slof Ijl Throat depth: 225 mm Distance spindle/table: 60-400 mm Adjustable vice with linear measurement readout Positioning length stop: PD-100e Control for automatic positioning Positioning: absolute or incremental Easily readable LED display Carriage with DC servo motor Positioning accuracy: +/- 0.1 mm/m Stop arm with spring dampening Stop plate with groove Programmable controller with 3,000 memory slots Roller conveyors: RD-200/3 Load capacity: 200 kg/m Roller width: 290 mm Roller diameter: 40 / 50 mm Insert plates Bracing for stabilization Control cabinet Available options: - Minimum quantity spray system with spray head and holder - Gripper clamp for securing material to the stop plate

Sąlyga: naudotas, High-Performance Drill Press ALZMETALL Type Abomat 20 Production Drill Press Serial No. 449 Year of manufacture: 1995 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle taper: SK 40 - M16 Throat depth: 280 mm Quill stroke: 500 mm Max. spindle distance: 685 mm Min. spindle distance: 185 mm Table size: 490 x 400 mm Spindle speed: 2000 rpm Automatic feed: 224 mm/min Rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Production drilling machine with single spindle speed and feed rate - Current spindle speed: 2000 rpm - Current feed rate: 224 mm/min - Two operation modes: manual and automatic - Electrically adjustable drill head height - Central lubrication - Control cabinet mounted at rear of machine - Mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment Required space (L x W x H): 1200 x 700 x 2530 mm Weight: approx. 900 kg Njdogd Ipkopfx Af Iscl Good condition

Sąlyga: naujas, Gamybos metai: 2024, The drilling machine can be operated both manually and fully automatically. After each drilling operation, the system automatically travels to the next drilling position on the X- and Y-axes as standard. ADVANTAGES Possible operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower requirements. Product Details Standard Measuring Lengths: 3,000 mm 6,000 mm Drilling Machine: Unimax 3 T AV (Alternatively also available with Unimax 4 Basic) Continuous drilling capacity in E 335: 25 mm Standard drilling capacity: 30 mm Thread cutting capacity: M 20 Spindle: MK 3 Feeds automatic (3T AV): 30 – 400 mm/rev Drilling depth: 125 mm Column diameter: 110 mm Weight: 250 kg Motor, pole-changeable: 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds, infinitely variable: Range A: 80 – 1,400 rpm Range B: 180 – 3,200 rpm Motorised height adjustment, rotation lock Ncodpjfu Swxsfx Af Ijl Optional: Thread cutting device Fully automatic version Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500 mm Manual drilling is possible Coordinate table with motorised drive for the Y-axis via the control system Travel distance of Y-axis: 200 mm Movable clamping table with motorised drive for the X-axis via the control system Travel distance of X-axis: 3,000 mm Clamping table with groove for fastening pneumatic clamps and material support rests. 2-axis control with memory function, allowing 3,000 storage slots Minimum quantity lubrication system with spray head and bracket You are welcome to view the desired system at any time in our manufacturing/demo hall. Please feel free to contact us about this. Plantec Maschinen GmbH

Sąlyga: naujas, Gamybos metai: 2024, Drilling machine Kudu with NC control and manual tool change (3-axis) Automatic drilling machine with movable processing unit – the table remains stationary, the drilling head moves. The drilling machine can be operated either manually or fully automatically. After each drilling cycle, the processing unit automatically moves in both the X and Y axes to the next drilling position. Operation has been kept very simple. The system is programmed directly at the machine control. The system is extremely robust and is built from proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Sturdy machine base • Drilling head speed: up to 2,800 rpm • Tool holder: HSK 50 • X, Y, and Z axes are driven by servo motors Ncsdpfxsfu Iwms Af Isl • Rapid traverse in X axis: 18 m/min • Rapid traverse in Y axis: 5 m/min • Distance table top edge to bottom of tool holder: 245 mm • Table width: 450 mm • Working height: 1,005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on tool) • Processing path Y axis: 230 mm • Tolerance on X axis: ± 0.1 mm/m • Tolerance on Y axis: ± 0.05 mm • Tolerance on Z axis: ± 0.05 mm • System weight: 2,000 kg • System dimensions: 8,000 mm x 2,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front guarding via light barrier • Rear access protection, machine fence • Simple programming directly at the machine • Cooling via minimum quantity spray system • Without material clamps • Digital handwheel Your advantages: • Workpiece surfaces are protected • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to machines with a moving table • Chips are collected in a chip tray • Extremely simple programming & operation You are welcome to inspect the machine at any time in our production/demo hall. Please feel free to contact us. Plantec Maschinen GmbH

Sąlyga: naujas, Gamybos metai: 2024, UNIBOHRFIX 100 H Fully Automatic Drilling Machine, Measuring Length 6000mm Art. No. 6020 With the fully automatic UniBohrFix 100 drilling machine, your material is positioned on the X-axis at the desired location, clamped, and drilled. All you have to do is press the start button. Round tubes, rectangular tubes, angle profiles, as well as flat and solid materials can be conveniently clamped pneumatically into the horizontal gripper of the positioning system. After simply entering the X-values or recalling an already programmed process, the unit operates entirely autonomously. The Y-axis can be adjusted by the operator via a manual handwheel with digital display. Advantages • Sequences of holes are carried out automatically at precise intervals. • Operative errors are drastically reduced. • Programming is completed in just a few minutes. • Excellent price-performance ratio. • Significant reduction in manpower requirements. Fully automatic design Measuring length: 6,000 mm Overall length: 13,500 mm NC single-axis control Pneumatic vise (clamping width 200 mm) Minimum quantity lubrication unit with holder and spray nozzle Drilling machine: Unimax 3T AV (see technical data on datasheet) Anti-rotation device Motorized height adjustment Thread-cutting unit NC Positioning System PD 200p Feed force: 200 kg Positioning possible by absolute and incremental dimensions Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel carrier profile for contamination protection Infeed and outfeed material roller conveyor RD-200/4 Njdpfx Aofu Itbjf Iecl Length: 6,000 mm / 7,000 mm / Load capacity 200 kg/m / Height-adjustable rollers / Mounting brackets / Roller width 407 mm / Insert plates / Bracing / Roller diameter 50 mm / Steel rollers Plantec Maschinen GmbH

Sąlyga: naujas, Gamybos metai: 2024, UNIBOHRFIX 100 E Fully Automatic Drilling Machine, Measuring Length 6000mm (2-Axis NC Drilling Machine) Item No. 6019 The fully automatic UniBohrFix 100 drilling machine positions your material at the desired location on the X-axis, clamps it, and performs the drilling. You simply need to press the start button. Round tubes, rectangular tubes, angle profiles, as well as flat and solid materials, can be conveniently clamped pneumatically into the horizontal gripper of the positioning system. After simple entry of the X and Y values or calling up an already written program, the machine works completely independently. Advantages: • A sequence of holes is drilled automatically at precise intervals. • Potential operator errors are drastically reduced. • Programming takes only a few minutes. • Very good price-performance ratio. • Significant reduction in manpower required. Fully automatic design Measuring length: 6,000 mm Total length: 13,500 mm NC 2-axis control including LAN interface for data transfer Pneumatic vice (clamping width 200 mm); alternatively available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drilling machine: Unimax 3T AV, alternatively with Unimax 4 Basic (see data sheet for technical information) Anti-rotation device Tapping unit Motorized height adjustment NC positioning system PD 200p Feed force: 200 kg Positioning by absolute and incremental dimensions possible Carriage with DC servo motor and encoder Carriage with 12 ball bearings Pneumatic stop clamping with high holding force Steel guide rail with precision rack Steel support profile for contamination protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / height-adjustable rollers / mounting brackets / roller width 407 mm / entry plates / reinforcements Roller diameter 50 mm / steel rollers You can visit the desired system at any time in our manufacturing/showroom. Please feel free to contact us for an appointment. Njdsfu Irzopfx Af Ijcl Plantec Maschinen GmbH

Gamybos metai: 1993, Sąlyga: paruoštas naudoti (naudotas), Automatic drilling machine Schüco 293784, year of manufacture 1993, for drilling door hinges, 8 drilling mounts, Nodpfxsd R Sdye Af Iscl

Sąlyga: naudotas, Pinole machining unit, drilling automaton, drilling machine, upright drill, multi-spindle drilling machine, gang drilling machine, dowel drilling machine - Max. feed stroke: 150 mm Nedpfx Asci Ahtof Iscl - Drive: 1.5 kW, 2750 rpm - Spindle mount: Threaded - Quantity: 1x drilling head available - Price: per piece - Dimensions: 700/200/H180 mm - Weight: 18.3 kg/piece