Fa. Albin Halbritter Getränkeindustriebedarf GmbH

Būklė: naudotas, Gamybos metai: 1995, mašinos/transporto priemonės numeris: LC324, Naudota visa Tetra Pak įranga TBA 8 500S Šis įrenginys yra specialiai skirtas pieno produktų, tokių kaip pienas, išpilstymui ir buvo pagamintas Tetra Pak 1995 metais. Yra visi būtini dokumentai, įskaitant naudotojo vadovus. Taip pat yra savos saugos priemonės, skirtos nelaimingų atsitikimų prevencijai. Tai pilna išpilstymo linija, susidedanti iš Tetra Pak užpildymo įrenginio TBA 8 500S modelio, skirto 0,5 l Tetra Brik pakuotėms. Linijos gale yra Mariani paletizatorius, pagamintas 1993 m. Įranga parduodama kartu su visais konvejeriais. Itedjyvqn Rspfx Agfod

Būklė: naudotas, Gamybos metai: 1994, mašinos/transporto priemonės numeris: LC613, Technical Specifications & Performance DataThis used complete filling line is designed for the industrial packaging of aseptic carton containers and is based on the renowned Tetra Brik Aseptic platform. It is intended for beverage production environments that demand hygiene and reliability, offering seamless handling from aseptic filling through to cap application and final boxing. As a used filling line, it provides a cost-effective way to increase capacity while maintaining quality standards.Main Filling Machine: Tetra Brik Packaging Systems AB TBA 8 / 1000 SLIMYear of Manufacture (Main Filling Machine): 1994Packaging Format: 1.0L slim cartonAuxiliary Equipment: Tetra Pak Cap Applicator 21; Tetra Pak Cardboard Packer 70Line Operation: aseptic carton filling with downstream capping and palletizingCompliance: CE-markedAdvanced Automation & Control SystemsThe line utilizes factory-integrated automation from the Tetra Brik Aseptic platform, designed for consistent performance and user-friendly operation. Safety interlocks and secured access points ensure safe operation during beverage production. A standardized control architecture facilitates start-up, shut-down, and recipe management for the 1.0L slim carton format.Centralized operator interface for coordination of filler, capper, and packer functionsAutomated sequences for aseptic filling and downstream handlingSafety circuits and emergency stop devices for protected operationDesigned to support rapid diagnostics and routine maintenanceProduction Line Integration CapabilitiesThis used filling line integrates aseptic filling with cap application and palletizing into a coherent industrial packaging solution. Suitable for beverage production settings that require carton handling and end-of-line packaging. The Cap Applicator 21 and Cardboard Packer 70 are configured for inline operation with the TBA 8 / 1000 SLIM, minimizing transfers and ensuring steady throughput.Inline configuration from filler through cap applicator to case packerOptimized for 1.0L slim carton containersCompatible with standard conveyor and accumulation layoutsEngineered for inline operation; can be adapted to existing conveyor systemsMachine Condition & Maintenance HistoryOffered as a used, complete filling line in fully functional and ready-to-operate condition. It provides an efficient option for facilities seeking a used aseptic carton solution without the typical lead times of new equipment. Routine recommissioning and line integration services are recommended according to site standards.Operating Condition: Ready for operationCommercial Condition: Used/Second-hand industrial packaging linePerformance & VersatilityThe TBA 8 / 1000 SLIM is a proven aseptic filling machine for carton containers, engineered for stable, hygienic beverage production. Downstream, the Cap Applicator 21 ensures precise... Isdeyvpt Eepfx Agfjtd

Būklė: naudotas, Gamybos metai: 2000, veikimo valandos: 26 600 h, mašinos/transporto priemonės numeris: LC612, Technical Specifications & Performance Data This used filling line is an aseptic carton packaging solution from Tetra Pak, configured for 200 ml slim packs. It is designed for industrial packaging and beverage production of dairy and fruit juice products, offering reliable performance and efficient downstream handling. Configuration: Tetra Pak TBA/19 200B Slim Filler + TSA21 Straw Applicator + TCP70 Carton Packer + Conveyor Belt Line + Line Controller and Paper Cart Production Speed: up to 7,500 packs per hour Pack Volume: 200 ml Slim Filling Technology: Aseptic Container Type: Carton (Brick-Packs) Main Models and Codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70 Operating Hours: 26,600 Year of Manufacture: Filler 2000, Packer 2008, Straw Applicator 2000 Advanced Automation & Control Systems Itodeyvilzjpfx Agfjd The system features an industrial automation architecture suitable for high-availability operations in food and beverage production. An assessment indicates the presence of a GE PLC platform for downstream components, with recommended upgrades to PLC and I/O covers to ensure long-term reliability. Control: Central line controller with integrated conveyor logic PLC/HMI: GE PLC upgrade recommended for DE modules Format Change: 200 ml slim changeover kit included; additional format parts may be needed for other sizes Safety: Safety guards and interlocks in accordance with standard industrial packaging machine practices Production Line Integration Capabilities This used filling line is designed for inline operation from aseptic filling to straw application and carton packaging. Conveyors ensure smooth transfer between machines, enable balanced production flow, and support efficient accumulation. Inline Operation: Filler → Straw Applicator → Carton Packer Material Handling: Conveyor line integrated into the line controller Application Scope: Ideal for milk and juice in 200 ml slim cartons Scalability: Potential to adapt to other carton sizes with suitable change parts Machine Condition & Maintenance History The system has been evaluated after maintenance work and inspected prior to full recommissioning. The filler can be operated up to the production stage (water test completed). The downstream equipment (DE) can be powered up but requires further intervention before heating up and full operation. An overhaul is recommended, including replacement of components in the superstructure, machine frame, jaw system, final folder, service unit, strip applicator, and electrical systems. Current Status: Maintenance/renovation in progress Condition Summary:

Būklė: naudotas, Gamybos metai: 2002, Overview This automatic self-adhesive labelling machine, ENOS Base model, was manufactured in 2002 and is designed for the application of front and back labels on bottles of various shapes. The machine utilizes pressure-sensitive (self-adhesive) labelling technology, which allows flexible operation without requiring mechanical change parts. The system can handle round, cylindrical, and square bottles with a volume range from 0.2 l to 1.0 l, making it suitable for a wide variety of applications in the beverage, spirits, or specialty product sectors. With a production capacity of approximately 1,000 bottles per hour (based on the 0.7 l format), the machine is well-suited for small to medium-sized production environments. Ijdpfjyuulpjx Agfjtd Technical Data Manufacturer: ENOS Model: Base Machine type: Automatic self-adhesive labelling machine Year of manufacture: 2002 Labelling technology: Pressure-sensitive adhesive (self-adhesive) Labelling positions: Front label, back label Output: Approx. 1,000 bottles per hour (with 0.7 l bottles) Bottle formats: 0.2 l – 1.0 l Bottle shapes: Round, cylindrical, square Change parts: Not required Condition: Used, dismantled

Būklė: naudotas, Gamybos metai: 1996, Overview This labelling machine from Anker-Roland was manufactured in 1996 and is designed for applying cold glue labels to glass bottles. The machine features two labelling stations and four bottle plates, making it suitable for typical multi-label applications in beverage and spirits bottling plants. The configuration allows for the application of neck, front (body), and back labels. With a production capacity of approx. 3,000 bottles per hour at 0.7 l, the system is well suited for small to medium-sized production lines. The machine comes with eight format sets, accommodating bottle diameters from 60.5 mm to 86.5 mm, which enables flexible processing of various round bottle formats between 0.35 l and 1.0 l. Technical Data Manufacturer: Anker-Roland Machine type: Rotary cold glue labelling machine Year of manufacture: 1996 Serial number: 1058/96/065L Labelling stations: 2 Bottle plates: 4 Labelling positions: Iedpfx Agoyuui Ujfstd – Neck label – Front label (body label) – Back label Output: approx. 3,000 bottles per hour (at 0.7 l with neck, front, and back label) Labelling technology: Cold glue Bottle formats: – 0.35 l – 0.5 l – 0.7 l (3 format sets) – 1.0 l (3 format sets) Number of format sets: 8 Bottle diameter range: approx. 60.5 – 86.5 mm Bottle shape: Round bottles Condition: Used Availability: On request

Būklė: naudotas, Gamybos metai: 1997, Overview This linear filling machine, model ALWID Matador-HV, was manufactured in 1997 and is designed for filling liquid products into various bottle formats in small to medium-sized production environments. The machine operates based on the high vacuum filling principle, which enables level-controlled filling and ensures consistent fill heights. The filling machine is equipped with five filling stations and achieves a capacity of approximately 1,000 bottles per hour at 0.7 L. One advantage of the system is that the filling machine itself does not require format parts, allowing for flexible processing of different bottle sizes. The corresponding capping system can process both PP screw caps and swing top closures (grip corks). For this purpose, the machine features two cap sorting bowls, one for each closure type. There are around ten format sets available for the capping unit, covering round and square bottles from 0.2 L to 1.0 L. With its conventional control system and robust mechanical design, the ALWID Matador-HV is a reliable solution for filling applications involving beverages, spirits, or specialty liquids. Technical Data Manufacturer: ALWID Model: Matador-HV Machine type: Linear filling machine (high vacuum filler) Year of manufacture: 1997 Filling principle: High vacuum filling with level control Number of filling stations: 5 Capacity: approx. 1,000 bottles per hour (at 0.7 L) Bottle formats: 0.2 L – 1.0 L Bottle shapes: Round, Square Closure types: PP screw caps, T-cork closures (grip corks) Closure sorting systems: 2 sorting bowls (PP caps / grip closures) Format sets (capper): approx. 10 sets Control system: Conventional control Condition: Used Iedpfx Aeyuufpsgfetd

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, veikimo valandos: 610 h, Funkcionalumas: visiškai funkcionalus, 1) 12-STATION-RINSEMASCHINE IN 2 PHASEN (WASSER+LUFT) für Flaschen mit einem maximalen Durchmesser von 115 mm. Der Spülvorgang erfolgt ausschließlich bei Anwesenheit von Flaschen. Die Komponenten der Spüldüsen kommen nicht mit dem Flaschenhals in Kontakt. 2) 12-STATION-ELEKTROPNEUMATISCHER HOCHDRUCK-FÜLLER für Flaschen mit einem maximalen Durchmesser von 115 mm. Der Füllstand kann elektrisch am Bedienfeld und ohne manuellen Eingriff von 25 bis 100 mm unterhalb des Flaschenhalses eingestellt werden. Jedes Füllventil ist mit einer Sterilisierungsflasche zur Reinigung und Desinfektion der Maschine ausgestattet. Die Sterilisierungsflaschen werden manuell positioniert. Das Füllventil arbeitet mit stillem und kohlensäurehaltigem Getränk von 0 bis 8 bar. Der Füllstand ist auf 100 % präzise. 3) MONOKOPF-KRONKORKENAUFSETZER für D26 Kronkorken. Für einen Aufpreis kann ein Schraubverschluss installiert werden. Die Zuführung und der Transport zwischen den Stationen erfolgt über eine Schnecke, die die Flaschen führt und synchronisiert. Monoblock ausgestattet mit: - Schutzverkleidung gemäß CE-Norm mit Türen aus gehärtetem Glas - Universalschnecke - Seitliche Führungen mit motorischer Verstellung - Blindflaschen für die Sterilisation der Spülstationen - Bedienpanel mit SPS (PLC) und Touchscreen - Elektrische Höhenverstellung aller Stationen OPTIONEN: - Flaschenauslaufwaschung mittels 7 Düsen - Innenbeleuchtung mit 4 LED-Lichtleisten - Fernwartungsfähigkeit Leistung*: 1.100 Liter/Stunde Geschwindigkeit: 1.000 – 3.000 Flaschen/Stunde (mit INVERTER) * Die tatsächliche Leistung ist abhängig von mehreren Faktoren: A) Flüssigkeit B) Abfülltemperatur C) Flaschendruck D) Flaschentyp Zum Füller liefern wir kostenlos einen Packtisch mit. Ijdpfxsyukiwe Agfstd

Būklė: naudotas, Gamybos metai: 2000, Apžvalga Mašina skirta didelio greičio apvaliam etiketavimui nuo ritinio. Įrenginys yra iš gamybinės linijos, visiškai veikiantis. Gamyba jau nutraukta, tačiau įranga galima apžiūrėti. Techniniai duomenys Našumas: 21 000 butelių per valandą (bph) Butelių formatai: 1,5 l ir 0,5 l Naudojamos etiketės: RITINYJE du etikečių ritinių žurnalai, vienas aplikatorius Darbo valandos: apie 39 000 val. Maitinimas: 400 V ± 5 %, 50 Hz ± 1 %, 3P + N + PE, pagalbinis 24 V DC Darbo kryptis: iš kairės į dešinę/pagal laikrodžio rodyklę Butelių padavimas/pasiėmimas lygiagrečiai vienoje mašinos pusėje Galimybė žymėti galiojimo datą (Videojet Excel 170i Ultra High Speed) Itedpfxeyudr Eo Agfod

Būklė: naudotas, Gamybos metai: 2019, Apžvalga Šis izobarinis skardinių užpildymo monoblokas buvo pagamintas 2019 m. Italijos įmonės GAI. Modelis GAI MLE 6661 CAN skirtas gėrimų išpilstymui į skardines. Įrenginys jau išmontuotas, sandėliuojamas ir iš karto prieinamas. Techniniai duomenys Galingumas: iki 1 600 skardinių/val. (33 cl); našumas iki 650 l/val. Formatai: 33 cl standartinė, 33 cl siaura, 50 cl standartinė Pritaikymas: skardinių užpildymas Konfigūracija: linijinis monoblokas su 6 skalavimo vožtuvais, 6 užpildymo vožtuvais, viengalve dangtelių uždarymo stotimi, svorio kontrole ir išmetimo funkcija, skardinių plovimo tuneliu, dangtelių sandėliavimo kolonomis Dangtelio formatas: CDL202 Skardinės skersmuo: 50 mm – 85 mm Ijdpfx Agsyudacofetd

Būklė: naudotas, Gamybos metai: 2019, Apžvalga  Ši centrifuga pagaminta Alfa Laval 2019 m. CLARA 250 sukurta alaus apdorojimui gėrimų gamyboje. Įranga vis dar sumontuota ir gali būti apžiūrima gamyboje pagal pageidavimą. Yra iškart prieinama. Techniniai duomenys  Galia: 80 HL/h – 150 HL/h Pritaikymas: alus Darbo valandos: 1 800 h Iedjyuc Uljpfx Agfjtd

Būklė: naudotas, Gamybos metai: 2003, Apžvalga Ši rotacinė PET pūtimo formavimo mašina buvo pagaminta 2003 m. Vokietijos įmonės Krones. Modelis S8 skirtas aukštos kokybės PET butelių gamybai ir pritaikytas 1,5 l buteliams su PCO1881 kakleliu. Mašina yra geros darbinės būklės, iš karto prieinama ir gali būti integruota į esamas gaiviųjų gėrimų, tokių kaip vanduo, gazuoti gėrimai ar sultys, gamybos linijas. Yra oro tiekimo sistema. Techniniai duomenys Itsdpfx Ageyucausfjd Paskirtis: PET butelių gamyba Našumas: 14 000 butelių per valandą Pagaminimo metai: 2003 Butelių formatai: 1,5 l Kaklelio tipas: PCO1881 Centrinis aušinimas Yra oro tiekimo sistema Komplektacija: Krones Contiform S8 pūtimo formavimo mašina (2003) Aušinimo įrenginys Preformų padavimo sistema Preformų talpykla Preformų vartymo įrenginys Yra oro tiekimo sistema

Būklė: naudotas, Gamybos metai: 1997, Apžvalga Toliau pateiktas 2 komponentų maišytuvas buvo pagamintas 1997 m. Vokietijos gamintojo Krones. Įrenginys iš karto prieinamas dabartinės geros būklės. Techniniai duomenys: našumas 45 000 l/val., tinka gazuotiems gėrimams. Pagaminimo metai: 1997 Itjdpfx Agsyub T Hofed

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 2 327 h, Funkcionalumas: visiškai funkcionalus, Automatic linear stainless steel monobloc, FLAT frame, consisting of: 1. Linear electropneumatic rinser – 8 nozzles 2. High-pressure linear electropneumatic filler – 8 nozzles 3. Pressurized water jet for foam induction 4. Single-head 4270P crown capper – 26 and 29 mm diameter Power supply: 380V three-phase + neutral Output: 1,500 bottles (33cl)/hour – 1,100 bottles (50cl)/hour – 1,100 bottles (75cl)/hour Filling temperature between 2 and 4°C, product at max 3.5 bar Direction of operation: Left / Right Bottle type: cylindrical Iedpfoyt Iuhjx Agfstd _____ Included equipment • Multi-format screw conveyor • Dummy bottle for rinser sterilization • Dummy bottle for filler sterilization • Dummy bottle for jetting sterilization • PLC and touchscreen operator panel • Cap/crown presence detector • Electric height adjustment for all stations • Safety protection compliant with CE standards • Pneumatic pump • Water sterilization kit (Pall 1-micron filter + Pall 0.2-micron filter) • Complete channel for 26mm & 29mm crown caps with photocell • Integrated CIP (clean-in-place) washing program Also included in the price: Pneumatic transfer pump Comprehensive brewery overhaul scheduled within 2 months prior to machine departure (Value: €4,610) Possibility to train on the machine with our production team for a few days (training schedule to be arranged together to ensure coverage of as many formats as possible) _____ Available formats (star sets): LONG NECK 33CL VICHY 33CL STEINIE 33CL NRW 50 50CL BRASSEUR 75CL METHODE TRAD 75CL _____ After-sales service & Maintenance • After-sales service provided by GAI France • Maintenance contract with GAI France currently active _____ Availability: Q4 2026 (mid-November 2026, upon receipt of the new machine)

Būklė: naudotas, Gamybos metai: 2011, Overview This KRONES Topmatic labelling machine was manufactured in 2011 and was previously deployed in a multi-use glass production line. The machine is designed as a main labeller with parallel infeed and outfeed, making it suitable for high-speed labelling applications. The system features two labelling stations: one for neck and front labels, and one for back labels. The neck label is applied with hot glue for sealing (tamper evidence), while the remaining labels are applied with cold glue. The machine is equipped with two glue pumps and comes with a spare hot glue unit. The back label station can be disengaged, while the front station is fixed. With 36 bottle plates and a production capacity of up to 33,000 bottles per hour, this machine is ideal for demanding returnable glass applications. The total operating hours are approximately 44,350 as of January 2025. Spare parts documentation is available. Technical Data Manufacturer: KRONES Model: Topmatic Year of Manufacture: 2011 Machine Type: Rotary cold glue / hot glue labelling machine Number of Bottle Plates: 36 Output: up to 33,000 bottles per hour Operating Direction: Parallel bottle infeed and outfeed Bottle Type: Returnable glass bottles Operating Hours: approx. 44,350 h (as of January 2025) Labelling Stations: 2 labelling aggregates 1 × neck and front label station 1 × back label station (disengageable) Glue System: 2 glue pumps Hot glue for neck label (tamper evidence/sealing) Cold glue for front and back labels 1 spare hot glue device included Dimensions: Depth: 4,300 mm Width: 3,300 mm Electrical Supply: 400 V / 230 V, 3~ / N / PE, 50 Hz, 22 A Documentation: Spare parts documentation available Ijdpfxoyt Iltj Agfstd Condition: Used, already dismantled and stored.

Būklė: naudotas, Gamybos metai: 1998, Overview This returnable glass bottle filling line consists primarily of equipment from KRONES, supplemented by selected components from other established European manufacturers such as Hormes, RINK, and HEUFT. The line is designed for a nominal capacity of 33,000 bottles per hour, covering all key process steps from depalletizing to palletizing. The labelling machine will be completed to the buyer's specifications, allowing the system layout to be adapted to the intended bottle and product range. This line is suitable for returnable glass beverage applications. Based on the listed machines, the line is configured for crate handling, bottle washing preparation, empty bottle inspection, high-performance filling and capping, and repacking into returnable crates. For bottles with screw caps, the RINK machine can be used before the bottle washer; for crown cork bottles, an additional format set is required as per your notes. Technical Data - Capacity: 33,000 bottles/hour - System type: Returnable glass bottle filling line - Year of main machines: mainly 1998 and newer - Bottle type: Returnable glass bottles - Closure types: Crown cork and screw caps - Packaging type: Beverage crates / returnable plastic crates - Filling system: KRONES isobaric filling block - Special notes: - RINK KM 790/4K-3K QL: for bottles with screw caps only - For crown cork bottles, a suitable format set is required - Labeller: will be supplied as per the customer’s requirements Scope of Supply - Depalletizer | Profipack | – | 2006 - Decasing Machine | KRONES | Linapac A-T 1600 | 1998 - Crate Washer | Hormes | Crate Washer | 1992 - Crate Decapper | RINK | KM 790/4K-3K QL | 2020 - Bottle Washer | KRONES | Lavatec-KES | 1998 - Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 - Filling Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 - Labelling Machine | To be provided per customer requirement - Case Packer | KRONES | Linapac F-T 1800 | 1998 - Palletizing System | Profipack | 2006 - Pallet Wrapper | Robopack | 2006 - Pallet Securing | Vertical strapping | 2006 Additional Information: Bottle formats: - 0.25 l Single Bottle – Ø 57.5 × 215 mm - 0.33 l Ale Bottle – Ø 61 × 236.5 / 238 mm - 0.33 l Ale Bottle – Ø 68.5 × 234.5 mm - 0.5 l Ale Bottle – Ø 68.5 × 270 mm - 0.5 l Stein Bottle – Ø 70.5 × 174 mm - 0.5 l Bavaria Bottle – Ø 70 × 260 mm - 0.5 l NRW Bottle – Ø 67 × 260 mm - 0.5 l Single Bottle – Ø 82 × 295 mm - 0.7 l GDB Bottle – Ø 79 × 290 mm - 0.75 l GDB Bottle – Ø 79 × 290 mm Itodpfx Ajytvyfjgfsd - 1.0 l GDB Bottle (lightweight) – Ø 84 × 305 mm - 1.0 l AMG Bottle – Ø 83.7 × 298 mm Crate formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Heuft Reflexx – inspektorius tuščių butelių ir etikečių su didelio greičio patikra. Modelis: Reflexx HBBRTIXX Valdiklis: Spectrum TX Galingumas iki 50 000 bph. Gamybos metai: 2015 PUIKI BŪKLĖ Tai daugiau nei tik greita patikra. HEUFT sistema kruopščiai tikrina tuščius stiklo butelius, ar nėra defektų, prieš pradedant juos pildyti, taip užtikrdama visapusišką kokybės kontrolę, kuri suteikia didelės vertės visam išpilstymo procesui. Itjdpfxeytrdts Agfsd Štai kodėl šie HEUFT inspekciniai sprendimai yra tokie svarbūs: 1. Pilnas padengimas, jokių "aklųjų zonų": Sistema neatlieka tik paviršutinės apžiūros – ji patikrina visus paviršius ir kampus: dugną, šonines sieneles, kaklelį bei sriegį. Šis detalumo lygis būtinas norint aptikti itin mažus defektus, kurių žmogaus akis lengvai nepastebi. 2. Pažangios aptikimo technologijos: Naudojama galinga aukštos raiškos kamerų, pažangios AI vaizdo apdorojimo ir kai kuriuose modeliuose – patentuotos impulsinės rentgeno technologijos kombinacija. Aptikti galima: - Stiklo defektus: Įtrūkimus, nuskilimus, įskilimus, įtrauktis, sriegio pažeidimus. - Svetimkūnius: Nuo folijos, cigarečių nuorūkų iki vabzdžių, likučių ar pavojingiausių stiklo šukių, pasislėpusių butelio dugne. 3. Mažas neteisingų atmetimų procentas: Dėl intelektualaus vaizdo analizės (kaip HEUFT reflexx A.I.) sistema atskiria realius defektus nuo kosmetinių pažeidimų, todėl neišmetami tinkami, pakartotiniam naudojimui tinkami buteliai. HEUFT SPECTRUM TX Centrinis valdymas: viena platforma visiems reikalavimams. Tikslus, tinklinis ir suderinamas su įvairiomis sistemomis: HEUFT SPECTRUM TX yra bazė įvairioms technologijoms, moduliams ir funkcijoms. Tos pačios kartos įrenginiai gali būti tiksliai pritaikomi konkretiems poreikiams vietoje ir bet kada papildomi dėl universalios platformos.

Būklė: naudotas, Gamybos metai: 1998, Overview This automatic bottle packaging machine Krones - Linapac F-T-1800 was manufactured in 1998 and was previously installed in a returnable glass bottling plant. The machine is designed for the automatic packing of filled bottles into beverage crates and is typically positioned downstream of the filling and inspection line. The LINAPAC packer series is frequently used in high-performance beverage filling plants due to its robust construction and reliable crate handling. The system supports a wide range of bottle formats and crate types commonly found in the beer and beverage industry. The machine originally operated in a high-capacity production environment and is suitable for integration into returnable glass bottling plants with similar throughput requirements. Technical Data Manufacturer: Krones Model: Linapac F-T-1800 Machine type: Automatic bottle packer Year of manufacture: 1998 Application: Automatic placement of filled bottles into beverage crates Bottle formats: 0.25 l single bottle – Ø 57.5 × 215 mm 0.33 l ale bottle – Ø 61 × 236.5 / 238 mm 0.33 l ale bottle – Ø 68.5 × 234.5 mm 0.5 l ale bottle – Ø 68.5 × 270 mm 0.5 l stein bottle – Ø 70.5 × 174 mm 0.5 l Bavaria bottle – Ø 70 × 260 mm 0.5 l NRW bottle – Ø 67 × 260 mm 0.5 l single bottle – Ø 82 × 295 mm 0.7 l GDB bottle – Ø 79 × 290 mm 0.75 l GDB bottle – Ø 79 × 290 mm 1.0 l GDB bottle (lightweight) – Ø 84 × 305 mm 1.0 l AMG bottle – Ø 83.7 × 298 mm Crate formats: 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Condition: Used Availability: On request Iedpfeytq Tasx Agfotd

Būklė: naudotas, Gamybos metai: 1998, Overview This Krones Sensometic beer filling line was manufactured in 1998 and was previously installed in a high-performance beverage filling facility. The machine is designed for isobaric filling of beer and is equipped with 77 filling valves, enabling high throughput production. The filling line is configured as a filler and capper block, featuring two capping units: one for screw caps and one for crown corks. Both capping systems are fitted with 12 capping heads each, and the closure sorting systems are integrated into the machine. With a rated capacity of approx. 33,000 bottles per hour, this machine is suitable for large-scale operations in returnable glass bottling. The system supports a wide range of bottle formats commonly used in the beer industry. Technical Data Manufacturer: Krones Series: Sensometic Model: VPVI 77-103 / KK11 / SV11 Machine type: Isobaric beer filler with integrated capping systems Year of manufacture: 1998 Filling valves: 77 Capacity: approx. 33,000 bottles per hour Capping systems: - Screw capper: 11 heads - Crown cork capper: 11 heads Closure handling: Integrated closure sorting systems on the machine Bottle formats: - 0.25 l single bottle – Ø 57.5 × 215 mm - 0.33 l ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 l ale bottle – Ø 68.5 × 234.5 mm - 0.5 l ale bottle – Ø 68.5 × 270 mm - 0.5 l stein bottle – Ø 70.5 × 174 mm - 0.5 l Bavaria bottle – Ø 70 × 260 mm - 0.5 l NRW bottle – Ø 67 × 260 mm - 0.5 l single bottle – Ø 82 × 295 mm Iodpoytqzwefx Agfstd - 0.7 l GDB bottle – Ø 79 × 290 mm - 0.75 l GDB bottle – Ø 79 × 290 mm - 1.0 l GDB bottle (light) – Ø 84 × 305 mm - 1.0 l AMG bottle – Ø 83.7 × 298 mm Condition: Used Availability: On request

Būklė: naudotas, Gamybos metai: 2015, Overview This HEUFT Spectrum TX Empty Bottle Inspector was manufactured in 2015 and is used for the automatic quality control of empty glass bottles prior to the filling process. The machine is part of the HEUFT Spectrum TX series, which utilizes the manufacturer’s Reflexx inspection technology for highly precise bottle inspection. The system detects foreign objects, glass defects, and liquid residues inside the bottles, ensuring that only conforming containers enter the filling phase. HEUFT inspection systems are widely used in modern beverage filling plants due to their reliable optical inspection technology and modular design. The machine was installed in a high-performance filling line with a throughput of approximately 33,000 bottles per hour, making it suitable for large industrial beverage bottling operations. Technical Data Manufacturer: HEUFT Series: Spectrum TX Type: HBBISHXX Machine type: Empty Bottle Inspector (EBI) Technology: reflexx inspection technology Year of manufacture: 2015 Capacity: approx. 33,000 bottles per hour Inspection functions: Detection of foreign objects Detection of glass damage or defects Detection of liquid residues in bottles Application: Quality control of empty glass bottles prior to filling Typical installation position: Upstream of the filling system in beverage filling lines Condition: Used Availability: On request Iodpfsytp Ucex Agfetd

Būklė: naudotas, Gamybos metai: 1992, Overview This crate washer by HORMES was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is used for cleaning beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the depalletizer in returnable glass bottling lines to ensure that empty crates are thoroughly cleaned before being refilled and returned to circulation. Machines by Hormes are renowned for their robust construction and long service life in beverage production. This machine is suitable for integration into returnable bottle lines and provides an efficient solution for crate cleaning within beverage production systems. Technical Data Manufacturer: Hormes Machine type: Crate washer Year of manufacture: 1992 Application: Cleaning of beverage crates in returnable bottle lines Typical installation location: Upstream of the depalletizer in returnable glass bottling lines Condition: Used Availability: On request Itodjytpnijpfx Agfod

Būklė: naudotas, Gamybos metai: 2020, Overview Iodsytphcepfx Agfotd This automatic screw cap remover (unscrewer) from RINK was manufactured in 2020 and is designed for automatically removing screw caps from reusable glass bottles before they enter the bottle washing process. The machine was installed in a reusable glass bottling plant with a capacity of approx. 2,000 crates per hour. Systems of this kind are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75-liter GDB bottles in 12-bottle crates and includes format parts for various crate types. The system operates with crossflow crate transport and features a left-to-right crate infeed direction. The unit includes a cap discharge system and a blower unit to remove caps from the bottles. The machine was built using modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic Screw Cap Remover (Unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Output: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles prior to bottle washing Bottle format: 0.75-l GDB bottle (height approx. 295 mm) Crate formats: - 12-bottle pool N2 crate (400 × 266 × 333 mm) - 12-bottle single crate (395 × 295 × 355 mm) Crate transport: Crossflow crate transport Infeed direction: left → right Transport height: approx. 700 mm (adjustable up to 750 mm max.) Dimensions: - Length: 2,700 mm - Width: 1,400 mm - Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: - Danfoss frequency converter - Standard electrical equipment Additional equipment: - Cap transport system - Blower unit Technical documentation available Condition: Used Availability: On request

Būklė: naudotas, Gamybos metai: 1998, Overview This automatic bottle depalletizer Krones Linapac A-T-1600 was manufactured in 1998 and was previously installed in a returnable glass bottle filling plant for beer. The machine is designed to automatically remove empty bottles from beverage crates and transfer them to the bottle conveyor system for further processing. The depalletizer was operated in a production line with a capacity of approx. 33,000 bottles per hour and is therefore suitable for use in high-capacity glass bottle filling lines. LINAPAC series machines are widely used in the beverage industry due to their robust construction and reliable crate handling. The machine is no longer in production but is complete, electrically disconnected, and available for inspection. Documentation and CE conformity are available. Technical Data Manufacturer: Krones / Linapac Model: A-T-1600 Machine type: Automatic bottle depalletizer Year of manufacture: 1998 System rated output: approx. 33,000 bottles per hour Application: Automatic removal of empty bottles from crates in returnable glass lines Bottle formats 0.25 l individual bottle – Ø 57.5 × 215 mm 0.33 l Ale bottle – Ø 61 × 236.5 / 238 mm 0.33 l Ale bottle – Ø 68.5 × 234.5 mm 0.5 l Ale bottle – Ø 68.5 × 270 mm 0.5 l stoneware bottle – Ø 70.5 × 174 mm 0.5 l Bavaria bottle – Ø 70 × 260 mm 0.5 l NRW bottle – Ø 67 × 260 mm 0.5 l individual bottle – Ø 82 × 295 mm 0.7 l GDB bottle – Ø 79 × 290 mm 0.75 l GDB bottle – Ø 79 × 290 mm 1.0 l GDB bottle (lightweight) – Ø 84 × 305 mm Itedpfx Ajytpc Hegfjd 1.0 l AMG bottle – Ø 83.7 × 298 mm Crate formats 5 × 4 – 400 × 300 × 300 mm 6 × 4 – 400 × 300 × 270 mm 5 × 4 – 400 × 300 × 210 mm 4 × 3 – 355 × 275 × 345 mm 4 × 3 – 400 × 300 × 330 mm 5 × 4 – 355 × 275 × 255 mm 5 × 4 – 400 × 300 × 290 mm Condition: Used, available for inspection Documentation: Available Conformity: CE conformity available Availability: On request

Būklė: naudotas, Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1798, FIMER užpildymo monoblokas Metai: 2003 Greitis: 2 500 butelių/val. Modelis: SRT 12-12-1-S-VA-DEA Judėjimo kryptis: pagal laikrodžio rodyklę Skalavimo įrenginys: 12 spaustukų Fiksuotas purkštukas Užpildymo sistema žemo slėgio vakuumu Vožtuvų skaičius: 12 Viengalvė rotacinė uždarymo sistema Kamščio tipas: tiesus natūralus kamštis ir sraigtinis kamštis Sraigtinis kamštis: 30x60 Esami kamščių keitimo formatai Vakuumo sistema uždarymo įrenginyje Dujų įpurškimas Formatas: Ø 76 mm Apsaugos nuo nelaimingų atsitikimų Naudojimo instrukcijos pridedamos Pridėtos elektros schemos Pridedama atitikties deklaracija Esamos atsarginės dalys Itodpfoytn Tksx Agfod

Būklė: naudotas, Gamybos metai: 1994, veikimo valandos: 85 296 h, Funkcionalumas: visiškai funkcionalus, Tetrapak TBA 8 1L Slim Line V100 sudaryta iš: TBA 8 užpildymo įrenginio be pull tab – 85 286 darbo valandų; Tetra Cap 21 (Recap 3) dangtelių uždėjimo įrenginio – 36 416 darbo valandų; Tetra kartoninių pakuočių pakavimo įrenginio 70 – 38 626 darbo valandų; rašalinio spausdintuvo EBS 6500; apie 15 metrų konvejerių su varikliais ir stabdžiais; bei atsarginių dalių – visas atsarginių dalių sąrašas pateiktas. Linija vis dar eksploatuojama, galima iš karto atiduoti. Linija prieš keletą metų įsigyta iš didelės gamyklos Vokietijoje, kur buvo prižiūrima tik „Tetra Pak“. Kaina nurodyta be PVM. Itjdpfx Agjytnc Sofed

Būklė: naudotas, Gamybos metai: 2009, Overview This empty bottle inspector (EBI) was manufactured in 2009 by the German company Krones. The machine is designed for inspecting empty glass and PET bottles prior to filling in beverage bottling lines. It has previously been used in production, professionally dismantled, and stored in a warehouse. The machine is available immediately from stock. Technical data Formats: 0.75 l gourmet bottle 0.25 l gourmet bottle 0.25 l Vichy bottle Application: Inspection of empty bottles before filling Configuration: Multiple inspection modules, including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign object detection, and bottle height control (tolerance ±2.5 mm) Inspection systems: Base inspection (camera) Sealing surface inspection Thread inspection (conical optics) Mouth/neck inspection Sidewall inspection with LED lighting Detection of transparent films on bottle base and sidewall Detection of abrasion marks via sidewall camera Residual liquid detection via infrared system and high frequency detection Rejection systems: Rejection of foreign objects at the infeed Rejection of contaminated bottles at the outfeed Separate rejection of bottles with damaged closure or thread Utility supply: Pneumatic system (components from Festo/Bosch), electronic control cabinet cooling Conveyor height: approx. 1,050 mm Operating direction: Left-handed machine Itjdsythznspfx Agfjd