PreZero Pyral GmbH

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2019, veikimo valandos: 3 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, bendras svoris: 9 500 kg, paskutinio kapitalinio remonto metai: 2025, pildymo angos plotis: 420 mm, pildymo angos ilgis: 1 250 mm, Technical Data – Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Fill opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Drive power: 30 kW Total connected load: 40 kW Total current consumption: 70 A Throughput capacity with empty beverage cans: - with one pressing cycle: approx. 1.7 t/h - with two pressing cycles: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Installed press dimensions: 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made from wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet as well as aluminum, brass, and copper waste. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition, see the function video after the overhaul. During relocation, the machine suffered transport damage. The control cabinet was struck by a forklift, causing minor dents, and the main switch (on/off switch) was damaged. These issues are reflected in the significantly reduced selling price and must be repaired by the buyer at their own cost. Notes: All documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is complete. Inspection is possible by appointment. We do not accept liability for technical information or potential errors. Rjdpfx Ahjzbxvljgew

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, spaudimo jėga: 200 t, galia: 0,045 kW (0,06 AG),

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS Drum Press auto is ideally suited for compacting steel drums from 30 to 220 liters, but it also allows for easy compression of plastic and cardboard drums. In many cases, the pressed recyclable material can subsequently be remarketed. The drum press is particularly notable for its reliability and ease of operation. By compacting these waste/recyclable materials, you achieve up to 90% volume reduction, significantly lower your disposal costs, and ensure proper recycling of the material. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction ratio: 8:1 Pressing time: 40 seconds Motor: 11 kW, 32 Amp Power supply: 380 - 400 V (3 phase) Noise emission: 68 dB AUTO control with automatic press cycle 30-liter drip tray with drain tap Press ram with spikes for venting the drums during the pressing process Maximum safety standards through a fully enclosed housing Suitable for steel, plastic, and cardboard drums from 30 to 220 liters A quality product 'Made in Europe' Suitable for compacting: Steel drums Plastic drums Cardboard drums Fiber and paper drums Additional options: Rjdpfx Aoc Spgujhgew Annual maintenance with UVV inspection Machine color per RAL Press insert for cans, oil and air filters

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF60HD Special Baler is ideal for compacting your tough and hard materials such as cans, PET, metal buckets, and other steel containers, but it also reduces plastics to a minimum. This specialist baler stands out for its user-friendly operation and large filling capacity. Finished bales can be easily removed using the automatic bale ejector. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the material to the recycling loop. Pressing force: 13 tonnes Bale weight: 25 - 60 kg (depending on material) Bale size: 650 H (variable) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Filling opening: 600 W x 400 H mm Press cycle time: 25 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy removal Retainer to minimize material spring-back Cross-tying for secure bale stability Holder for 7 strapping tape rolls A quality product "Made in Europe" Suitable for compacting PET bottles Redpfx Ahsbhy Twjgsw Cans and steel containers Canisters and plastic containers Cardboard and film Additional options: Annual maintenance with UVV inspection Machine colour per RAL Strapping tapes Power supply 380 - 400 V (3 phase) PET baler, PET bottle baler, can baler, special baler, baler, paper baler, waste paper baler, cardboard baler, film baler, waste baler, recycling baler, compactor, commercial waste press, residual waste press.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS drum press is ideally suited for compacting steel drums from 30 to 220 liters, but it can also easily compress plastic and cardboard drums. In many cases, the compressed material can subsequently be remarketed. The drum press is particularly characterized by its reliable and user-friendly operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and properly return the material to the recycling loop. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction ratio: 8:1 Pressing cycle time: 40 seconds Motor: 11 kW 32 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB User-friendly lever operation 30-liter collection tray with drain valve Press plate with spikes for piercing drums to release air during compaction Rodpfxjzdr Ts Ahgew Maximum safety standards thanks to a fully enclosed housing Suitable for 30 to 220 liter steel tight head drums, plastic drums, and cardboard drums A quality product 'Made in Europe' Suitable for compacting: Steel drums Plastic drums Cardboard drums Fiber drums and paper drums Additional options: Annual maintenance with safety inspection (UVV) Machine color according to RAL AUTO control with automatic pressing cycle Press insert for cans, oil and air filters Drum press for metal drums / plastic drums