Traub Gmbh

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, Workpiece Data Maximum workpiece diameter: 275 mm Maximum normal module: 6 mm (at the pitch circle in steel with a tensile strength of 600–700 N/mm²) Minimum normal module: 1.5 mm Maximum face width: approx. 5.5 mm Maximum helix angle: approx. 60° Maximum number of teeth: 120 Minimum number of teeth: 5 Maximum transmission ratio: 1:10 Minimum transmission ratio: 1:1 Technical Data Dimensions and Weights Space requirements (L x W x H): 5,200 x 2,300 x 2,400 mm (including all auxiliary components and electrical cabinet with doors open) Net weight (including standard accessories): approx. 15,500 kg Gross weight with standard accessories and overseas packaging: approx. 16,800 kg Chip conveyor: 300 kg Coolant tank with chip conveyor: 450 kg Swarf filtration unit (optional): 600 kg Power supply and connection data Total connected load: 75 kVA Frequency: 50 Hz ± 1 % Voltage: 3 × 400 V ± 10 % Circuit protection: 100 A slow-blow Voltage interruption: max. 3 ms Voltage drop: max. 20% of peak voltage for max. 20 ms Voltage spikes: max. 200% of nominal voltage for 1.5 ms Harmonic content: max. 10 % of RMS value Mains symmetry (voltage difference between 2 phases): max. 2 % of nominal voltage Protective earth: interference-free Control voltage: 24 V DC Special versions: on request Gkjdpfjxmgr Djx Acuec Mains configurations: see Chapter 5.2 Connection location (installation and foundation plan): see Chapter 5.2 Compressed air supply Pressure: min. 3.5 bar, max. 10 bar Volume (with open nozzle): 0.03 Nm³/min Moisture (max. pressure dew point): 10°C Temperature: 10°C to 40°C Solid particle size up to: 40 µm Connection and size: see Chapter 5 (installation and foundation plan)

Sąlyga: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, KLINGELNBERG DANTŲ RATŲ MATAVIMO MAŠINA P26 Pagrindiniai duomenys (vardinė plokštelė / titulinis lapas) Tipas / mašina: P26 Mašinos numeris: B5646 Pagaminimo metai: 2003 Svoris: 1.200 kg Brėžinio numeris: 3.650.01.5350 Serija: 737 Parinktys: AV35, K30 Maitinimas: 190–500 V AC Speciali dalis: reikalavimų specifikacija GN 4401 Sistemos / programinės įrangos informacija URL / gamintojas: www.klingelnberg.com Aparatinė įranga: 586, 2, 0 Operacinė sistema: 5.1 Windows NT BASIC: V6.4 CRT ID: 6:128HCG B255 (sutrump., galbūt skaitymo paklaida) Versijų / build įrašai: PRO20050808 CRT20060309 KBD20050505 MNU20060118 TXT20060118 Gkedpfx Acoxl Agnjuec DMP20060311 PRT20030403 CAL20021306 MIP020/20020000

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, veikimo valandos: 3 200 h, Funkcionalumas: visiškai funkcionalus, Šią kūginį krumpliaratį frezuojančią staklę iš Montrasio GmbH galime pasiūlyti su nedelsiant pristatymu. Ruoinio duomenys Maksimalus ruoinio skersmuo Ø 850 mm Įprastas modulio intervalas 5–20 mm Didžiausias dančio plotis 125 mm Didžiausias dančių skaičius 360 Pagrindo kampo reguliavimo diapazonas ±90° Įrankio duomenys Šlifavimo disko skersmuo (min–maks) 229–508 mm (9–20") Didžiausias šlifavimo disko aukštis su pagrindo plokšte 135 mm Įrankio velenas HSK-E63 tvirtinimas pagal DIN 69893-5 Maksimalus šlifavimo veleno greitis 4 500 min⁻¹ Maksimalus ekscentriko greitis 3 800 min⁻¹ Maksimalus atkaitiklio greitis 6 000 min⁻¹ Nominali šlifavimo veleno galia 27 kW Ruoinio velenas Gksdoxizbxspfx Acuec Oerlikon išorinio kūgio sėdimosios vietos skersmuo 1:4 – Vidinio kūgio sėdimosios vietos skersmuo Ø 203,2 mm (8") Ruoinio veleno skylė Ø 150 mm Ruoinio veleno įleidimo gylis 740 mm Maksimalus ruoinio veleno greitis 40 min⁻¹ Bendrieji staklių duomenys Bendroji prijungimo galia (be filtravimo sistemos) 60 kVA Staklių matmenys su filtravimo sistema apie 5.790 × 4.500 × 3.280 mm Staklių grynasis svoris (be filtravimo sistemos) apie 24 400 kg

Sąlyga: naudotas, Gamybos metai: 1973, mašinos/transporto priemonės numeris: 24109, Įranga: Atskirų ruošinių pertvaras Hidraulinis ruošinio spaudimas Drožlių transporterio konvejeris Peilio tvirtinimo varžtas Padėties nustatymo plokštelė (indeksavimo plokštė) Keičiamieji krumpliaračiai Hidraulinė sistema Gkjdpfexdfa Uox Acusc Aušinimo sistema Specifikacija: Minimalus išorinio kūgio atstumas: 70 mm (2.75") Maksimalus kūgio atstumas: 254 mm (10") Maksimali krumpliaračio žingsnio skersmuo: 508 mm (20") Naudojamų peilių diametrai: 229 – 457 mm (9 – 18") Šaknies kampas: 55° – 80° Veido plotis: 76 mm (3") Dantų skaičius: 20 – 75 Kūginės skylės didžiojo galo diametras: 87 mm (3-27/64") Kūginumo koeficientas: 0,50" per pėdą Kūgio gylis: 16 mm (0,625") Peilio apsukos: 6,8 – 16,5 aps./min. Padavimas (sek./dantį): 3 – 9 Pagrindinis variklis: 5 AG, 900 aps./min. Hidraulinis variklis: 7,5 AG, 1800 aps./min. Užimamas plotas: 2997 x 2197 mm (118 x 86,5") Bendras aukštis: 1778 mm (70") Apytikslus grynasis svoris: 7270 kg (16 000 lbs) Supakuotas eksportui svoris: 7710 kg (17 000 lbs)

Sąlyga: naudotas, Gamybos metai: 1977, mašinos/transporto priemonės numeris: 19909, Įranga komplektuojama su: Indeksavimo plokšte Ženevos kamščiu Pjovimo galva Hidrauliniu ruošinio spaudimu Aušinimo skysčio siurbliu ir bakeliu Drožlių transporterius Papildomos pjovimo galvos, indeksavimo plokštės ir Ženevos kamščiai prieinami Techninės specifikacijos: Minimalus kūgio atstumas: 2,75" (coliai) Maksimalus kūgio atstumas: 10" (coliai) Maksimalus dantračio žingsnio skersmuo: 20" (coliai) Naudojamų pjovimo galvų diametrai: 9 – 18" (coliai) Šaknies kampas: 55 – 80° Darbinis plotis: 3" (coliai) Dantračio dantų skaičius: 20 – 75 Didžiosios kūgio skylės diametras: 3-27/64" (coliai) Kūgio nuolydis vienai pėdai: 0,50" (coliai) Kūgio gylis: 0,625" (coliai) Pjovimo greitis: 15,6–87,7 aps./min. Pajėgumai (sekundės/dantukui): 5 – 34,3 Pagrindinis variklis: 10 arklio galių, 1800 aps./min. Hidraulinis variklis: 7,5 arklio galios, 1800 aps./min. Reikalingas apytikslis grindų plotas: 118" x 86,5" (coliai) Gkodpfxjxdfazj Acujc Bendras aukštis: 70" (coliai) Apytikslis neto svoris: 8 540 kg Eksportui supakuoto svoris: 9 300 kg

Sąlyga: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25734, Vybavení: - Řídicí systém Fanuc 150MB - Hydraulické upínací vřeteno - Pracovní vřeteno s velkým průchozím otvorem #80 kužel - Dělící zařízení pro polotovary - Šroubovitý pohyb - Upravený válec (Modified Roll) - Chladič a filtrace chladicí kapaliny Hansen - Nádrž a čerpadla na chladivo - Dopravník třísek - Zásobník třísek - Odlučovač mlhy Reven - Hydraulický systém - Transformátor - Držák nožů - Pracovní světlo - Obslužná plošina - Ruční nářadí - Dokumentace Technické specifikace: Extrémní převodový poměr: Čelní frézování: 10:1, Čelní ozubení: 10:1 Plná hloubka – maximální: Čelní frézování: 1,25" (31,75 mm), Čelní ozubení: 0,93" (23,50 mm) Maximální šířka čela: Čelní frézování: 152,00 mm (6,00"), Čelní ozubení: 76,20 mm (3,00") Gksdpfx Acsxaqa Ssuec Rozsah počtu zubů: 1–300 včetně Průměr roztečné kružnice ozubeného kola, max.: 1000 mm (39,37") Maximální velikost frézy: Průměr 18" (pro čelní frézování) Maximální velikost frézy: Poloměr 350 mm (pro čelní ozubení) Rozsah úhlu paty (osa B): 5° až 90° (čelní frézování i ozubení) Vzdálenost středu stroje od čela vřetene: 229 mm (9,00") – pevná A – Pracovní vřeteno: 0 až 67 ot./min, 0 až 333 ot./min B – Kyvná základna: 0–30°/s, N/A C – Fréza: 0 až 500° X – Horizontální pohyb: ±305 mm (±12") Y – Vertikální pohyb: ±305 mm (±12") Z – Posuvná základna: -25/+700 mm (-1"/+28") B – Úhel paty: -5° až +90° Průměr kuželové díry (velká část): 203 mm (#80 kužel) až 152 mm (#60 kužel) Kužel na délku stopy: 3/4“ – stejné Hloubka kužele (přední): 152,40 mm (6") Hloubka vrtání: 678 mm (26,7") Průměr kuželové díry: 140 mm (5,5") Průměr průchozí díry vřetene: 180,98 mm (7,125") ROZMĚRY STROJE: Délka × šířka: 5920 mm × 5310 mm (233" × 209") Výška: 3280 mm (129") Hmotnost: 29 484 kg (65 000 lb)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, CNC kūginė krumpliaratė frezavimo staklė su lankuotu dantavimu Gjdpfx Aow Tfb Socuskc Gleason No 631 Pagaminimo metai: 2011 Valdymas: SIEMENS 840d Staklės buvo pilnai kapitališkai suremontuotos 2011 metais. Įdiegta nauja valdymo sistema ir pavaros.

Sąlyga: naudotas, Gamybos metai: 2003, Techninės detalės: Ratų skersmuo - maks.: 275 mm Gkjdpfxew S Imus Acusc Ratų plotis: * mm Modulis - maks.: * Mašinos svoris apie: 9,4 t Reikalinga erdvė apie: 4,7 x 3,6 x 3,82 m Mažiausias dantų skaičius: 5 Didžiausias dantų skaičius: 2000 Danties aukštis: 20 mm Didž. dantytės plotis (vidinis dantytumas): 58 mm X ašis: 325 mm y ašis: 350 mm Z ašis: 475 mm Kūginė krumpliaračių pjovimo staklė Gleason Pfauter su Promot Automation *

Sąlyga: paruoštas naudoti (naudotas),

Sąlyga: naudotas, The Samputensili S 500 B bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the milling process of bevel gears. Technical Data: Gear diameter: 500 mm Module - max.: 5 Face width: 200 mm Space requirement approx.: 4.5 x 3.2 x 2.4 m Machine weight approx.: 13,000 kg *Image shows the machine in its current condition as a used machine Godpfsv N H N Ejx Acujkc

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 291127, ratlankio skersmuo: 275 mm, ratlankio plotis: 55 mm, valdiklių gamintojas: Siemens, valdiklio modelis: 840 C, Face Milling – Single Part Process – Continuous Operation: - Workpiece and tool (typically Spiron) rotate simultaneously; all teeth are produced in a single pass. - Cutter head features several tool groups (not arranged in a circle). - Teeth have parallel heights. - Tapered tooth head surface. Single Part Method: - The workpiece remains stationary while the tool (typically Arcon) rotates and cuts one tooth by plunging into the material. - After one tooth is cut, the tool retracts, the workpiece indexes by one tooth width, and the next tooth is cut. This process is repeated until all teeth are machined. - The cutter head has all tools positioned along a circular path. - Tapered tooth height. - Parallel tooth head surface. The C28 can perform both gear and pinion machining. For single part operation, the C28 must be "prepared"—i.e., equipped with a direct measuring system, workpiece axis part transmission brake, and a license file for single part production. TECHNICAL DETAILS Control: Siemens 840 C Gear diameter: max. 275 mm Gear width: 55 mm Module: 1.5 - 6.5 Spiral angle: 0-60° Number of teeth: 6-120 mm Transmission ratio: 1:10 - 1:1 Gksdpfx Acev I Ud Isuec Cutter head radius: 62 - 110 mm Number of cutter groups: 5-19 (Oerlikon) Travel X / Y / Z: 500 / 885 / ±185 mm Motor speed per axis: 2,400 rpm Transmission X / Y / Z: 3:1 Leadscrew pitch per axis: 10 mm Movement range E / V axis: -5° to 95° / ±7.5° Motor speed E/V axis: 400 / 900 rpm Travel E/V axis: 1,800 / 1,098 °/min Transmission E/V axis: 80:1 / 1:1 Mounting diameter A/B axis: 130 / 140 mm Spindle speed A/B axis: 667 / 345 rpm Permissible motor speed A/B axis: 10,000 / 4,500 rpm Transmission A/B axis: 15:1 / 13:1 Travel V1 axis: 85 - 225 mm Travel speed V1 axis: 6 m/min Motor speed V1 axis: 1,800 rpm Leadscrew pitch V1 axis: 5 mm Travel U axis: 112 - 258 mm Travel speed U axis: 0.6 m/min Transmission U axis: 4.3:1 Motor speed U axis: 3,000 rpm Leadscrew pitch U axis: 5 mm MACHINE DETAILS Weight: 13 t Space requirement: 5.2 x 2.3 x 2.4 m Power supply: 3x 400V, 50 Hz, 90 A Transport weight: 16.5 t

Sąlyga: paruoštas naudoti (naudotas), The Klingelnberg KNC 60 bevel gear cutting machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gearing and transmission technologies for milling spiral bevel gear sets. Technical specifications Klingelnberg KNC 60 CNC Maximum gear diameter: 650 mm Maximum face width: 120 mm Module: 2.2–12 mm Number of teeth: 5–120 Hypoid offset: +/- 100 mm Compatible cutter head radii: 55, 100, 135, 170, 210 mm Machine weight: approx. 16,000 kg Dimensions (L x W x H): 5750 x 2800 x 2700 mm Gksdpfx Acevyd Ndsujc *The illustration shows the machine in its current used condition. On request, it can be offered partially refurbished or fully overhauled as a retrofit, with a new CNC control system (SIEMENS ONE).

Sąlyga: geras (naudotas), Wheel diameter - max. 1600 mm Wheel width 250 mm Module - max. 30 Module - min. 8 Tooth height 58 mm Gksdpeu Dbucofx Acujc Tooth width 250 mm Machine weight approx. 42.3 t Space required approx. 4.45 x 6.00 m - Cone distance in mm for spiral angle 30° minimum: 150 maximum: 800 - Cone angle, in degrees minimum: 5 maximum: 85 - Tooth angle minimum: 0° maximum: 45° - Number of teeth to be cut minimum: 10 maximum: 150 The machine is complete, fully functional and in good condition. Equipment / Accessories: - complete set of change gears - 4 pcs. cutter heads - various milling cutters - Operating manual in English

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1988, SARATOV 5C280P Generator de roți dințate conice elicoidale - 2 utilaje Diametru maxim roată dințată: 800 mm Modul maxim: 16 Lățime maximă inel roată dințată: 125 mm Număr de dinți: 5-150 Interval turații ax principal: 20-125 rpm Putere motor principal: 7,5 kW Dimensiuni de gabarit (Lxlxh): 3170x2180x2200 mm Greutate: 15 t Gksdoum Ez Rspfx Acujc

Sąlyga: naudotas, Gamybos metai: 1997, Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Module – min. 1.5 Total connected load 62 kW Machine weight approx. 12 t Required space approx. 4.7 x 4.4 x 2.45 m DESCRIPTION Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Module – min. 1.5 Workpiece diameter – max. 275 mm Gear width max. 5.5 mm Helix angle 0–60° Number of teeth 5–120 Transmission ratio min. 1:1 Transmission ratio max. 1:10 Cutter drive motor 20 kW Workpiece drive 14.5 kW Total connected load 62 kVA Machine weight approx. 12 t Required space approx. 4.7 x 4.387 x 2.45 m Tool Spindle (D-axis) - Workpiece spindle speed (infinitely variable) 60 to 350 rpm Tool Positioning Axis (E-axis) - Swivel range 0 to 360° - Max. swivel speed 19.5°/s Workpiece Spindle (B-axis) - External taper acceptance diameter (1:4) 140 mm - Standard internal taper (1:20) 99.218 mm - Max. workpiece spindle speed 300 rpm - Workpiece spindle bore 90 mm Workpiece Positioning Axis (Y-axis) - Travel 870 mm - Max. travel speed 4.5 m/min Indexing Rotary Axis (A-axis) - Swivel range 315° - Max. swivel speed 40°/s Gsdpfsul Etdex Acuokc Axis Offset (Z-axis) - Travel range max. +/- 50 mm - Max. travel speed 0.657 m/min Workpiece Swivel Axis (C-axis) - Swivel range -8.5 to 98° - Max. swivel speed 21.5°/s Milling Depth Axis (X-axis) - Travel -25 to 640 mm - Max. travel speed 6 m/min Machine Distance (V-axis) - Travel 150 mm - Max. travel speed 1.6 m/min

Sąlyga: paruoštas naudoti (naudotas), Generator de roți dințate conice drepte SARATOV 5C276P Max modul: 10 Diametru maxim roată dințată: 500 mm Distanță maximă con roți dințate: 250 mm Lățime maximă inel roată: 80 mm Unghi minim al conului de divizare (pas), grade: 5 Număr de dinți roată: 10 – 150 Gksdpfx Aceuc T Hxeuec Distanță între ax și centrul mașinii, mm: – max. (unghi piesă brută 5°) 375 mm; – min. (unghi piesă brută 90°) 75 mm Cursă: 100 mm Cursă dublă slider: 48 – 400 curse/min Putere motor: 4 KW Dimensiuni mașină: 2885 x 2570 x 1995 mm Greutate mașină: 8750 kg

Sąlyga: geras (naudotas), Gamybos metai: 2002, Wheel diameter - max. 275 mm Wheel width 55 mm Module - max. 6 Module - min. 1 Control system 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m Gsdpfx Acstumrpouekc

Sąlyga: geras (naudotas), Gamybos metai: 2000, krumpliaračio skersmuo: 449 mm, Ausgestattet mit: Fanuc 150MB CNC-Steuerung Trockenschneiden Schneidwerkzeug-Abdeckung Späneabsauganlage Automatische Türen Hydraulikanlage Zentralschmierung Arbeitsleuchte Signalampel Godpsruakgefx Acuokc Technische Daten: Größtes Übersetzungsverhältnis: 10:01 Arbeitsbereich (kontinuierlich): Maximale Zahntiefe: 15,24 mm Maximale Zahnbreite: 50,8 mm Arbeitsbereich Achsen: X-Achse (horizontal): -114 bis 178 mm Y-Achse (vertikal): -178 bis 190 mm Z-Achse (Schlitten-Grundplatte): -10,16 bis 500 mm Schwenkbereich Werkstückspindel (B-Achse): -3 bis 90° Maximaler Abstand Maschinenspindelmitte zur Spindelseite: 165 mm Anzahl Zähne: 5 - 200 (inklusive) Max. Teilkreisdurchmesser (Modul) bei typischem 35° Spiralwinkelgetriebe mit Max. Fräserdurchmesser 12" bei folgenden Übersetzungen: Formfräsen 1 x 1 – 13,5" – 342,9 mm 2 x 1 – 16,0" – 406,4 mm 5 x 1 – 17,7" – 450,0 mm Wälzfräsen (210 mm Fräserdurchmesser) 1 x 1 – 10,560" – 268,22 mm 2 x 1 – 10,286" – 275,00 mm 5 x 1 – 11,810" – 300,00 mm Fräskopf-Durchmesser: Helixact: 100, 125, 169, 200, 250, 320 mm Kontinuierliches Tauchverfahren, Tetrachlorethylen: 102 – 210 mm Werkstückspindel: Bohren großer Durchmesser: 5 3/64" Konische Steigung auf 304,8 mm (1 Fuß): 21/32" Kegeltiefe: 5,29" Durchmesser komplette Spindelbohrung: 3,35" Geschwindigkeiten: B-Achse, Werkstückspindel-Schwenkachse: 30° A-Achse, Werkstückspindel U/min: 0 – 83 min⁻¹ X-Achse horizontal: 80 mm/s Y-Achse vertikal: 80 mm/s Z-Achse Schlitten-Grundplatte: 80 mm/s Stellfläche (L x B x H, ca.): 4,75 x 3,40 x 2,54 m / 188" x 134" x 100" Maschinengewicht (ca.): 10.980 kg / 24.156 lbs

Sąlyga: geras (naudotas), krumpliaračio skersmuo: 508 mm, bendras aukštis: 1 780 mm, bendras ilgis: 2 990 mm, bendras plotis: 2 200 mm, MODELL 610 GLEASON ZAHNRAD-RAU- UND FERTIGBEARBEITUNGSMASCHINE Ausstattung: - Hydraulische Werkstückspannung - Hängebedienpult - Späneförderer - Teilerscheibe - Genfer Rad - Wechselräder - Hydrauliksystem - Kühlsystem - Bedienungsanleitungen Technische Daten: - Maximaler Zahnrad-Teilkreisdurchmesser: 508 mm (20") - Fräserdurchmesser: 229 mm, 267 mm, 305 mm, 356 mm, 406 mm, 457 mm (9", 10,5", 12", 14", 16", 18") - Zahnhöhe (Gesamttiefe): 31,75 mm (1,250") - Eingriffswinkel: 60° bis 80° Gkedpfxjrtryke Acusc - Stirnbreite: 76 mm (3,0") - Extremes Übersetzungsverhältnis (Minimum): 2,25 : 1 - Zähnezahl: 20 bis 75 - Durchmesser der Kegelbohrung am großen Ende: 87,3 mm (3-27/64") - Fräservorschub (Rau): 4,75 m/min bis 26,75 m/min (15,6' bis 87,7') - Vorschubzeiten (Sekunden/Zahn) Rau: 3 bis 35 - Fräservorschub (Fein): 2,07 m/min bis 6,25 m/min (6,8' bis 20,5') - Vorschubzeiten (Sekunden/Zahn) Fein: 3 bis 9 - Stellfläche (L x B x H): 3,00 m x 2,20 m x 1,78 m (118" x 86,5" x 70" H) - Gewicht: 7.940 kg (17.500 lbs.)

Sąlyga: naudotas, Gamybos metai: 1997, Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Module – min. 1.5 Workpiece diameter – max. 275 mm Tooth width max. 5.5 mm Spiral angle 0 – 60° Number of teeth 5 – 120 Transmission ratio min. 1:1 Transmission ratio max. 1:10 Cutter drive motor 20 kW Workpiece drive 14.5 kW Total power requirement 62 kVA Machine weight approx. 12 t Space requirement approx. 4.7 x 4.387 x 2.45 m Tool spindle (D-axis) – Workpiece spindle speed (infinitely variable) 60 to 350 rpm Tool positioning axis (E-axis) – Swivel range 0 to 360° – Max. swivel speed 19.5°/s Workpiece spindle (B-axis) – Acceptance diameter external taper (1:4) 140 mm Gjdpfsd Il R Aox Acuekc – Standard inner taper (1:20) 99.218 mm – Max. workpiece spindle speed 300 rpm – Workpiece spindle bore 90 mm Workpiece positioning axis (Y-axis) – Travel distance 870 mm – Max. travel speed 4.5 m/min Hobbing rotation axis (A-axis) – Swivel range 315° – Max. swivel speed 40°/s Axis offset (Z-axis) – Max. travel range +/- 50 mm – Max. travel speed 0.657 m/min Workpiece swivel axis (C-axis) – Swivel range -8.5 to 98° – Max. swivel speed 21.5°/s Milling depth axis (X-axis) – Travel distance -25 to 640 mm – Max. travel speed 6 m/min Machine distance (V-axis) – Travel distance 150 mm – Max. travel speed 1.6 m/min – Including 13 cutters –