Elemag GmbH

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, Technical Specifications Swing diameter: 356 mm Turning length: 510 mm Control system: M 730 BM Travel - X axis: 260 mm Travel - Y axis: -50 / +50 mm Travel - Z axis: 590 mm Sub-spindle travel (B): 624 mm Bar capacity: 65 mm Main spindle speeds: 5,000 rpm Gear stages: 2 Drive power: 15 / 11 kW Sub-spindle speed range: 6,000 rpm Drive power: 11 / 7.5 kW Rapid traverse (X, Y, Z, B): 30 / 10 / 30 / 30 m/min Total connected load: kVA Rbedjyycggopfx Afnew Machine weight approx.: 6.6 t Additional Information * CNC control: Mitsubishi M 730 BM * Main spindle with 3-jaw power chuck KITAGAWA N-08, diameter 210 mm * Sub-spindle with 3-jaw power chuck HAINBUCH B-TOP 165-43 * 12-station turret, driven tooling 10,000 rpm, power 5.5 / 3.7 kW * Y-axis * C-axis * High/low pressure chucking system for main and sub-spindle * High-pressure pump MABEO filter unit with 1.5 MPa * Coolant shower on chuck for both main and sub-spindle * Coolant shower for the machine bed enclosure * Oil mist separator * Hinge belt chip conveyor * Renishaw workpiece measuring system with optical signal transmission, sub-spindle * Cooling of the ball screw in the X-axis * Gantry loader, left-side configuration, 14-station magazine, 20-pallet workpiece storage, double gripper belt

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Technical Details Turning diameter: 760 mm Turning length: 1540 mm Control: Fanuc 31i-B Machine dimensions: 5500 x 2700 x 3110 mm Chip conveyor: 6900 x 2400 mm Total power requirement: 94.42 kW Machine weight: approx. 15.5 t Additional Information Turning center with continuously swiveling milling head and Y-axis, motorized lower turret and sub-spindle. Condition: Very well-maintained, machine comes from a site closure. Operating hours: Control on: 13,127 hours Operating time: 3,833 hours Processing time: 2,835 hours The upper head is supplied by a tool magazine and can rotate or mill at various angles. Even very complex components can be fully machined without additional repositioning. CNC Control: Fanuc 31i-B Swing diameter over bed: 1,000 mm Maximum turning diameter: 760 mm Maximum turning length: 1,540 mm Maximum bar diameter (Man./Cont.): 76/76 mm Y-axis travel: 230 mm (±115 mm) Chuck (sub-spindle) ASA-interface: A2-8 Rotational speed: 4,000 rpm AC motor output (cont./30min.): 22/26 kW Turning/milling head B-axis rotation/indexing: 240° (±120°) Tool holder: Capto C6 Rotational speed: 12,000 rpm AC motor output 30min.: 15/18.5 kW Number of tools: 40 (optional 80) Tool turret Number of driven tools: 12(12) Rsdeyycd Eopfx Afnebw Driven tool output: 7.8 kW/30min.

Būklė: geras (naudotas), Gamybos metai: 2011, Tekinimo skersmuo 376 mm, tekinimo ilgis 760 mm, strypo skersmuo 76 mm, Y ašis +/- 52,5 mm, C ašis 0,001 laipsnio, 12 padėčių bokštelis, 22 kW variklis, pagrindinis velenas 4000 aps./min., frezavimo velenas 5000 aps./min., Fanuc I serija, 3-žandų griebtuvai, drožlių transporteris, įrankių matuoklis. Rodsyyakvspfx Afnsbw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, tekėjimo ilgis: 744 mm, tekėjimo skersmuo: 430 mm, veleno skylė: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * Over bed: 600 mm * Over cross slide: 500 mm Distance between main spindle and sub-spindle: 975 mm Maximum turning diameter: 430 mm Maximum turning length: 744 mm Maximum bar diameter: 65 mm Maximum workpiece size with sub-spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Maximum bar capacity: 65 mm Maximum chuck size: 200 mm C-axis *Resolution: 0.001° Sub-spindle Drive power (100/40% DC): 17/22 kW Speed range: 0 – 7000 rpm Maximum chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *Resolution: 0.001° Rbedpsyx U Hijfx Afnow Upper tool turret Disc-type turret with directional logic Number of stations: 12 Driven stations: 12 Toolholder DIN 69880: VDI 30 Drive power: 6.7 kW Speed range: 0-4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: + 50 mm Lower tool turret Disc-type turret with directional logic Number of stations: 12 Driven stations: 12 Toolholder DIN 69880: VDI 30 Drive power: 6.7 kW Speed range: 0-4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES  Full enclosure, electrically interlocked, with sliding doors and machine light  Bar feeder IEMCA Master 890 MP (left side) for bar length 3300 mm Including: guide channel, centering device, axial displacement  Thermal compensation systems for integrated spindle motors (liquid cooled)  Hollow clamping cylinder with draw tube for main spindle  Solid clamping cylinder with draw rod for sub-spindle  C-axes for main spindle and sub-spindle  Transmit software for easy C-axis programming  Y-axis on the upper turret (distribution of cutting forces over 2 axes, resulting in extremely high rigidity)  Drive units in both upper and lower turrets  Parts ejector and flushing through the sub-spindle  Parts catcher device for finished workpieces Max. finished part: ø 65 x 200 mm Max. finished part weight: 4.5 kg  Conveyor belt for removing finished parts from machine  Turret steady rest including VDI 30 base holder, centrally controlled via coolant supply (14 bar) in the tool turret Diameter range: 10 – 70 mm  Coolant system with 2 high-pressure pumps (14 bar each) and 2 flushing pumps (3.7 bar each)  Cleaning gun for cleaning clamping devices, covers, and the entire work area with coolant  Swarf conveyor (hinged belt) in extended design for gantry system; suitable for: long steel chips, chip nests, stringy chips, dry and wet machining  Electronic oil mist separator 800 – 1000 m³/h  Automatic central oil lubrication for guideways and ball screws  Grease lubrication for main and sub-spindle  Foot switch for actuating clamping devices  HAINBUCH collet chuck size 65 for main spindle, without stop (without collets)  HAINBUCH collet chuck size 65 for sub-spindle, with stop type 100 (without collets)  3-color alarm lamp (red, green, white)  Serial interface  Mounting elements  Documentation

Būklė: geras (naudotas), Gamybos metai: 2015, HAAS ST 30 SSY CNC Turning-Milling Center Year of manufacture: 2015 Control: HAAS Machine no.: 3102813 Only approx. 9,950 operating hours (status as of: 25.03.26) Equipment: CNC turning-milling center with Y-axis Maximum travels: 406 mm x 584 mm Swing diameter: 806 mm Y-axis travel: ±50.8 mm Vector drive (22.4 kW) 4,500 rpm A2-6 spindle 10-inch chuck (254 mm) Hybrid turret with 24 tool stations (12 VDI/12 BOT) Driven tools with higher torque and C-axis 15” LCD color display Memory lock key switch Spindle orientation USB port Synchronized tapping Automatic tool presetting system Hinged belt chip conveyor Parts catcher Programmable hydraulic tailstock Ethernet interface 'Visual Quick Code' programming system VectorCam Turning - Special Haas Edition HAAS barfeeder Ø 76 mm Hainbuch collet chuck combination Axzug size 80 Chip guard for GR80 Vario Quick standard stop system size 80 Included in delivery: BOT/VDI holders/turret Turning tools Hainbuch collets Collets for tools Driven tools Swing door tool cabinet Machine setup elements Chip trolley Operating manual/documentation Machine parameters on USB stick Equipment, technical data, manufacturer’s brochure and machine layout – see PDF. Illustration, content and specifications are given without guarantee and therefore not binding. Rjdpfx Ajyx Dwqefnsbw All other accessories shown in the photos and videos are not included in delivery, and are therefore not part of this sale. The scope of supply only includes the accessories explicitly listed here, in the order confirmation and invoice. FCA (Free Carrier, loaded on truck) D-32457 Porta Westfalica Packaging only Delivery time: immediate Subject to prior sale / Payment due immediately upon conclusion of contract

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 10 066 h, Funkcionalumas: visiškai funkcionalus, CTX 410 V3 2 ašių universalus tekinimo staklės su CNC valdymu HEIDENHAIN Plus iT ir SlimLinePanel - C ašis - Įrankio pavara - AC pagrindinis variklis 21 kW, 24D Nm Rbedeyx Ax Topfx Afnow - Sauter diskinis revolveris - Dalinai tuščios tvirtinimo įranga - Skiedrų transporterio - Griebtuvas Revolverio diskas su 12 įrankių vietų, cilindrinis kotas Ø 40 mm pagal DIN 69880 vietoje 30 mm skersmens Strypų apdirbimo paketas sudarytas iš: - Hidraulinė tuščiavidurė tvirtinimo įranga, traukimo vamzdžio vidus maks. 66 mm - Detalės paėmimo įranga, pneumatinė, pasukama, detalėms Ø65 mm x 120 mm ilgio, - 4 spalvų signalinė lempa (Dėmesio: Papildomai reikalingas jungtis strypų padavimui arba automatiniam padavimo žurnalui)

Būklė: geras (naudotas), Gamybos metai: 2007, veikimo valandos: 4 262 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: R7AV13, tekėjimo skersmuo: 65 mm, Gali būti prijungta prie elektros, strypų padavėjo būklė nežinoma, išimta iš gamybos dėl naujos staklės atvykimo. Abiejose revolverinėse galvutėse visose pozicijose galima naudoti besisukantį įrankių laikiklį. Rbedpfxeyxxhqs Afnew

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, tekėjimo ilgis: 710 mm, Charakteristikos: Valdymo sistema: Siemens Didžiausias tekinimo ilgis: 710 mm Rbedpsyxrczefx Afnjw Didžiausias tekinimo skersmuo: 270 mm

Būklė: naudotas, Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Tekinimo/frezavimo centras su priešpriešiniu velenu su 10 CNC ašių (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Valdymas: FANUC 31:iA Pagrindinis velenas Veleno galia: 15/11 kW Redpfxsyxqnio Afnsbw Strypų skersmuo: 51 mm Veleno apsisukimai: 5000 min-1 Priešpriešinis velenas Veleno galia: 11/7,5 kW Strypų skersmuo: 51 mm Veleno apsisukimai: 50000 min-1 Tekinimo/frezavimo velenas Galia: 7,5/3,7 kW Apsisukimai: 12000 min-1 maks. tekinimo ilgis apatinis revolveris: 1005 mm Stūmoklio eiga X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 / 1090 / 1005 / 1008 mm Stūmoklio eiga Y1/ Y2: + - 70 / + - 50 mm B1 ašies pasukimo diapazonas: + - 95 ° Linijinis stelažinis žurnalas su palaikymo robotu CNC atraminė liunetė Aušinimo skysčio cikloninis filtravimo įrenginys su 2 aušinimo skysčio siurbliais Veleno alyvos aušintuvas

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, TECHNINIAI DUOMENYS: Gamintojas: DMG Gildemeister Rbjdpfx Ajyxqa Eofnew Modelis: NEF 400 Pagaminimo metai: 2009 Valdymo sistema: Heidenhain Maitinimas: 400 V / 50 Hz Prisijungimo galia: apie 21 kVA Srovė: 31 A Valdymo įtampa: 230 V / 24 V Laido specifikacija: L ≤ 5 m, 230 V – 150 W Pagaminta Europoje

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Time recording as of Feb. 2025 Operating hours = 16,085 h Main spindle = 616 h Milling spindle = 369 h CNC Control: Siemens Sinumerik Si 840D sl Maximum distance between centres: 4,500 mm Working height: 1,375 mm X-axis travel: -15 to +725 mm Y-axis travel: -245 to +4,756 mm Swing diameter over cross slide guide: 780 mm Swing diameter over bed: 820 mm C-axis, minimum increment: +/-0.001° Main spindle A15 with BVG; 3135 Nm; 2,000 rpm Spindle head DIN 55026 type A 15 Maximum speed: 3,000 rpm Maximum torque: 3,135 Nm Bore/milling unit Milling power (40/100% duty cycle): 36.5 / 29.8 kW Torque up to 1,110 rpm (40/100% duty cycle): 328 / 261 Nm Maximum speed: 5,000 rpm Swivel range (B-axis): -105° to +95° Vertical travel (Y-axis): -250 to +250 mm Steady rest SR5 with eccentric fine adjustment: 45–310 mm Tooling system: C8 Tool magazine (2 mags): 144 tools Rsdpjyxp H Dofx Afnjbw Tailstock Quill diameter MT6: 180 mm Quill stroke: 170 mm Quill force (adjustable): 5–28 kN Quill fine adjustment: +/-0.15 mm Additional equipment Coolant tank capacity: 990 l Workpiece measurement MC (Renishaw) Hobbing software & more

Būklė: naudotas, Gamybos metai: 2012, veikimo valandos: 20 000 h, mašinos/transporto priemonės numeris: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes, and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year: 2012 Spindle hours: 20,000 Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12 stations (all stations suitable for driven tools) Rotational speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor Rbedoyxpz Iopfx Afnsw 20 bar high-pressure system with paper belt filter Specifications subject to change and prior sale. Errors excepted.

Būklė: naudotas, Gamybos metai: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm Control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X axis: 260 mm Travel - Y axis: 100 (±50) mm Travel - Z axis: 795 mm Rapid traverse - longitudinal/plan: 30 / 30 m/min Rapid traverse B axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 speed: 4500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Driven tool speed: 10,000 rpm Driven tool drive power: 3.7/5.5/5.5 kW Driven tool torque: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar feeder interface Parts catcher spindle 1 and spindle 2 Workpiece and total piece counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Parts outfeed conveyor Automatic door Redoyxpv Sopfx Afnobw Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Presetting device spindle 1 & 2 Coolant shower 1m short bar loader magazine IRCO High-performance precision turning center with Y-axis and counter spindle. Perfectly suited for machining complex turned parts with off-center milling operations. Easy programming of the machine via CELOS-MAPPS 4 dialog control. Machine can be demonstrated under power and with chips. Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Būklė: naudotas, Gamybos metai: 2015, Technical details: Turning diameter: 65 mm Turning length: 120 mm Control: Index C200-4D SL Z-axis main spindle travel: 390 mm Z-axis sub-spindle travel: 390 mm X-axis sub-spindle travel: 600 mm Y1-axis travel: ± 80 mm Y2-axis travel: ± 80 mm X-axis rapid traverse: 45 m/min Y-axis rapid traverse: 15 m/min Z-axis rapid traverse: 45 m/min Spindle 1 speed: 5,000 rpm Spindle 1 power: 35.5/27.5 kW Spindle 1 torque: 170/125 Nm Spindle 2 speed: 5,000 rpm Spindle 2 power: 35.5/27.5 kW Spindle 2 torque: 170/125 Nm C-axis resolution: 0.00014° Bar capacity: 65 mm Spindle nose: AD 140 Spindle bore: 85 mm Milling spindle 1 speed: 18,000 rpm Milling spindle 1 power: 11 kW Milling spindle 1 torque: 19 Nm Milling spindle 2 speed: 18,000 rpm Milling spindle 2 power: 11 kW Rbjdpeyxpadefx Afnew Milling spindle 2 torque: 19 Nm B-axis swivel angle: 230° B-axis torque: 440 Nm B-axis angular resolution: 0.001° Milling spindle 1 & 2 tool magazine: 80 HSK A40 Milling spindle 2 magazine for static tools: 6 x VDI 25 Internal coolant supply: Knoll 80 bar / Ecofluid Machine weight approx.: 16.3 t Space requirements approx.: 3.73 x 2.92 x 2.58 m Equipment: Chip conveyor Spindle 1 power chuck SMW HFKN 165-46 mm Spindle 2 power chuck SMW HFKN 165-46 mm Collet chuck main spindle Hainbuch Spanntop Collet chuck sub-spindle Hainbuch Spanntop Bar loader interface Unimag Short bar loader IRCO ILS RBK 10016 Parts catcher for main and sub-spindle Conveyor belt for part removal Oil mist separator Büchel The Index R 200 is a high-precision multifunction turning and milling machine. It is equipped with 2 turning spindles and 2 milling spindles. Full 5-axis capability is installed on both milling spindles. The Z-axes are integrated in the turning spindle stocks. The X2 axis is located in the sub-spindle stock. Milling spindle 1 is equipped with X/Y/B axes in the head. Milling spindle 2 has Y/B axes in the head. Each milling spindle provides a full-value B (swivel) axis with 230° travel. The machine is equipped with a short bar loader IRCO and a parts catcher. The parts to be caught may have the following maximum dimensions: Diameter: 65 mm Length: 120 mm Weight: 5 kg Remnant length: 200 mm All linear axes are fitted with glass scales. Coolant supply is provided via main and sub-spindle, as well as through the sub-spindle. Tool breakage monitoring is available from a drill diameter of 1 mm. All current tool holders are included with the machine. It is in excellent condition!

Būklė: naudotas, Gamybos metai: 2009, veikimo valandos: 42 497 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: L2203458, tekėjimo skersmuo: 510 mm, ašies variklio galia: 11 000 W, veleno greitis (maks.): 6 000 aps./min, X ašies eiga: 175 mm, Z ašies eigos atstumas: 330 mm, Strypo skersmuo (maks.): 32 mm, bendras svoris: 3 500 kg, Staklių tipas: CNC tekinimo staklės Rsdpfx Afsyxn D Isnjbw Gamintojas: Doosan Modelis: Lynx 220A Pagaminimo metai: 2009-02 Darbo valandos: 42 497 h (įjungimo valandos, 2025-12-17) Didžiausias tekinimo skersmuo: 510 mm X ašis: 175 mm Z ašis: 330 mm Sūkių skaičius: 6000 aps./min Verpstelio galia: 11 kW Įrankių keitiklis: 12 Strypų padavėjas: Ø8-32 mm Svoris: 3500 kg Transportavimą, atsiėmimą bei išmontavimą turi organizuoti pirkėjas.

Būklė: geras (naudotas), Gamybos metai: 2006, veikimo valandos: 14 119 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6682NL151EG0306J, tekėjimo skersmuo: 260 mm, veleno greitis (maks.): 6 000 aps./min, bendras aukštis: 2 000 mm, bendras ilgis: 2 185 mm, bendras plotis: 2 460 mm, Strypo skersmuo (maks.): 45 mm, bendras svoris: 5 300 kg, Staklių tipas: CNC tekinimo staklės Gamintojas: DMG Mori Modelis: NL1500/500 Metai: 2006 Darbo valandos: 14119 val. (2025-12-17 duomenimis) Valdymas: MSX-850 BM Veleno sūkių dažnis: 6000 aps./min Rbsdpfxeyxnu Hs Afnjw Apdirbimo diametras: su strypų padavėju Ø16-45mm Įrankių vietos: 12 plius griebtuvas Svoris: 5300kg Matmenys (IxPxA): 2460x2000x2185mm Transportavimą, atsiėmimą bei išrinkimą organizuoja pirkėjas.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, veikimo valandos: 21 269 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0082, tekėjimo ilgis: 1 500 mm, tekėjimo skersmuo: 580 mm, X ašies eiga: 598 mm, Y ašies eiga: 230 mm, Z ašies eigos atstumas: 1 660 mm, TECHNICAL DETAILS Travel path X-axis: 598 mm Travel path Y-axis: 230 mm Travel path Z-axis: 1,660 mm Maximum turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main spindle Main spindle speed range: 12 – 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Drive power – main spindle: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 – 1,000 mm/rev Tool turret Type: H2 ATC Number of tool stations: 2 (1x L-tool / 1x M-tool) positions Driven stations: stepless Speed range – driven tool stations: 40 – 3,000 rpm Tool shank height: 25 mm Boring bar shank diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Maximum tool diameter: 170 mm Maximum tool length: 350 mm Maximum tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total connected load: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h EQUIPMENT Chip conveyor Central coolant unit High-pressure cooling 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Rbsdpfsyxmyujx Afnjw Various tool holders (44 pcs) Three-jaw chuck Schunk – ROTA NC 400-120 Electronic handwheel

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 7 000 aps./min, veleno skylė: 42 mm, valdiklio modelis: Siemens 840 D - SL, priešpriešinio veleno didžiausias greitis: 7 000 aps./min, Įranga: drožlių transporteris, TECHNICAL DETAILS Bar diameter: 42 mm Travel X-axis 1/2/3: 180 mm Travel Y-axis 1/3: ±45 mm Travel Z-axis 1/2/3: 704 / 620 / 704 mm Main spindle Speed: 7,000 rpm Drive power: 22 kW / 16.5 kW Torque at spindle: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Sub spindle Speed: 7,000 rpm Drive power: 19 kW / 16.5 kW Torque at spindle: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Tool turret Number of turrets: 2 + 1 pos Number of tool stations: 3x 12 pos Number of driven tool stations: 3x 12 pos Driven tool speed: 8,000 rpm Power: 11.4 kW / 2.3 kW Torque: 26 Nm / 14 Nm Tool holder: VDI 25 Rapid traverse (X / Y / Z): 30 m/min Acceleration: 0.5 g MACHINE DETAILS Control: Siemens 840 D - SL Total power requirement: 60 kW Dimensions & Weight Footprint: approx. 8.2 x 3.3 x 2.5 m Machine weight: approx. 7.5 t EQUIPMENT Documentation Chip conveyor Knoll High-pressure coolant (14 bar) Parts catcher Rbedpfx Afsyxmnxjnsw Sub spindle Interface for bar feeder Bar loading magazine Spinner Barload BL 0146 C-axis: 2x 0.001° Hydraulic unit Hainbuch collet chuck Y-axis: 2x ±45 mm Various tool holders Various collets Tool setting arm

Būklė: naudotas, veikimo valandos: 37 000 h, RS 51 MSY aukščiausios komplektacijos su Veržlėmis ESA gyvais ir statiniais įrankiais Strypų padavimu Renishaw sistema Detalių surinktuvais Rbodpfx Afoyxh Awenjw

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 2 139 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL257200651, tekėjimo ilgis: 700 mm, tekėjimo skersmuo: 366 mm, ašies variklio galia: 19 W, veleno greitis (maks.): 4 000 aps./min, veleno skylė: 91 mm, X ašies eiga: 260 mm, Z ašies eigos atstumas: 795 mm, bendras svoris: 5 800 kg, We are offering this very well-maintained and low-hour DMG MORI NLX 2500/700 CNC turning and milling center, year of manufacture 2020. Manufacturer: DMG MORI Model: NLX 2500/700 Year of manufacture: 2020 Condition: Very good Category ID: 1128 Type ID: 2239 Type: CNC Turning and Milling Center Machine hours: 7,598 h Program run time: 2,139 h Details: Base machine NLX 2500 / 700 with driven tools and C-axis Universal lathe with 3 axes Turning length: 700 mm Main spindle with integrated motor spindle ISM 80 (bar diameter in mm) AC motor with 15 / 18.5 / 18.5 kW power output (100% / 50% / 25% duty cycle) 4,000 rpm Hydraulic clamping units, see clamping cylinder / chuck C-axis with hydraulic spindle brake 10-position star turret BMT 10-position driven tool turret NC tailstock CELOS® with Mitsubishi control M730UM Control system: Mitsubishi control M730UM with CELOS CELOS - ERGOline Touch Spindle: Main spindle (spindle 1) standard Spindle options: Oil-blower cooler for recirculating cooling oil Chuck for main spindle: Main spindle (spindle 1) 10" hollow chuck Ø254 mm Main spindle (spindle 1) hollow clamping cylinder for 10" chuck Ø254 mm BB210A821 Chuck options: Double foot switch with protective cover Tool turret: Rotating tools with 40/14 Nm, 10,000 rpm 12-position BMT60 star turret for MC configuration Overhang length for driven tools 100 mm (limited Y-axis travel) Tailstock: NC tailstock quill for a live center MK 5 (live center not included) Cooling media / chip disposal: Use of water-soluble (emulsion) coolants Hinged belt conveyor, discharge on right (500, 700) Rbsdpfxsyxglks Afnow Coolant system with increased pressure 5 bar Interface for oil mist separator (extraction opening Ø150 mm + electrical parts) (AFS 1100) AFS 1100 oil mist separator unit Measuring / monitoring: Manual tool presetting device (swiveling) (standard) Further options: Customer power supply: 380 V Frequency: 50 Hz Metric setting SCHNEIDER transformer 45 kVA Technology cycles: Alternating spindle speed Control options: X-axis direction ISO Last maintenance: April 2024

Būklė: labai geros būklės (naudotas), Gamybos metai: 1993, veikimo valandos: 2 859 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 600 mm, tekėjimo skersmuo: 290 mm, Universalus tekinimo staklės – GILDEMEISTER CTX Pagaminimo metai: 1993 Darbo valandos: 2 859 h • 12 pozicijų revolverinis įrankių laikiklis • Didžiausias veleno sukimasis: 5 000 aps./min. • Didžiausias tekinimo skersmuo (X ašis): 290 mm • Didžiausias tekinimo ilgis (Z ašis): 600 mm • Hidraulinis 3-žandų griebtuvas, Ø 200 mm • Veleno skylė: Ø 66 mm Rsdpfx Asyxgi Nefnobw • Komplektuojama su drožlių transporteriu Staklės labai geros būklės, anksčiau naudotos techninio mokymo įstaigoje.

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2005, Funkcionalumas: neveikiantis, tekėjimo ilgis: 600 mm, tekėjimo skersmuo: 140 mm, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 110 mm, Z ašies eigos atstumas: 360 mm, valdiklio modelis: Siemens 840 D PowerLine, TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Rapid traverse (X / Y / Z axis): 25 / 12 / 50 m/min Main spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm Spindle bearing diameter: 110 mm Counter spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm X-axis travel: 150 mm Y-axis travel: 600 mm Spindle bearing diameter: 110 mm Tool turret Quantity: 3 Tool holder: VDI 25 x 48 DIN 69880 Number of tool positions: 3 x 12 Number of driven tool stations: 3 x 12 Max. speed of driven tools: 6,000 rpm Drive power for driven tools: 8 kW Max. torque: 16 Nm MACHINE DETAILS Total connected load: 53 kVA Dimensions & Weight Footprint: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t EQUIPMENT 2(3) Y-axes +/-35 mm Rjdpfxeyxgc Ns Afnobw 2 B correction axes (+/-1°) Chip conveyor Parts catcher Tool breakage monitoring Bar feeder: IRCO Profimat 65.6

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 450 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 960 mm, ašių skaičius: 5, Šis 5 ašių Mazak INTEGREX J-200 S buvo pagamintas 2021 m. Jo didžiausias apdirbimo skersmuo - 500 mm, X ašies eiga - 450 mm, Y ašies eiga - 200 mm, o Z ašies eiga - 960 mm. Staklėse įrengtas 36 įrankių žurnalas, o didžiausias suklio sukimosi greitis - 4 000 aps/min. Jei ieškote aukštos kokybės frezavimo-apvertimo galimybių, apsvarstykite mūsų parduodamas "Mazak INTEGREX J-200 S" stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Kontrolė: Sklandus G • Atstumas tarp velenų: 1000 + 440 mm • Didžiausias apdirbimo skersmuo: 500 mm • Suklio tvirtinimas: A2-6 • Didžiausia strypo talpa: 65 mm • Suklio anga: 76 mm • Įrankių laikiklis: Įrankiai: 36 Capto Papildoma įranga Rbedpfsyxc N Ejx Afnow • Medienos drožlių transporteris: "Mayfran" juostos tipo

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 200 mm, sukimosi skersmuo virš skersinio stumduko: 500 mm, ašies variklio galia: 40 000 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 87 mm, X ašies eiga: 490 mm, Y ašies eiga: 125 mm, Z ašies eigos atstumas: 1 200 mm, greitas poslinkis X ašimi: 40 m/min, greitas poslinkis Y ašis: 40 m/min, greitasis eiga Z ašyje: 50 m/min, sukimosi greitis (maks.): 12 000 aps./min, sūpynės skersmuo virš skersinio vežimo: 500 mm, veleno nosis: CAPTO C6, CNC CELOS WITH SIEMENS 840D AND MULTI-TOUCH SCREEN WORK AREA: Swing diameter: 500 mm Max turning diameter: 500 mm Max turning length: 1,200 mm Spindle distance (with sub-spindle): 1,470 mm MAIN SPINDLE: Spindle nose flange: 170 mm h5 Spindle bore: 87 mm Draw tube internal diameter: 67 mm Front bearing diameter: 130 mm Power, S1-100% duty cycle / S3-40% duty cycle: 33/40 kW Speed range: 4,000 rpm Torque S1-100% / S3-40% duty cycle: 580/700 Nm SUB-SPINDLE Power, S1-100% / S3-40% duty cycle: 25/32 kW Speed range: 5,000 rpm Torque S1-100% / S3-40% duty cycle: 280/360 Nm SLIDES: X-axis travel: 490 mm (-10/+480) Y-axis travel: ± 125 mm Z-axis travel: 1,200 mm Rapid traverse speeds X, Y, Z: 40/40/50 m/min Feed force S6-40% X/Y/Z: 9/6/9 kN MILLING-TURNING SPINDLE: Tool interface: Capto C6 Max spindle speed: 12,000 rpm Power, S1-100% / S3-40% duty cycle – 2 min: 19/22.5 kW Torque S1-100% / S3-40% duty cycle – 2 min: 85/120 Nm Partial step spindle axis: 0.001 degrees Holding torque: 850 Nm CNC B AXIS Swiveling range B1: ± 120° Swiveling speed: 25,200 °/min B-axis torque, S6-40% duty cycle: 614 Nm Hydraulic clamping: 2,800 Nm MACHINE CONFIGURATION Control CELOS with Siemens 840D sl Operate ERGOline 21.5'' with Multi-Touch screen Main Spindle Main spindle as integrated electrospindle ISM 102 - Drive: 33/40 kW (100/40% duty cycle) - Torque: 580/700 Nm (100/40% duty cycle) - Speed range: 0 – 4,000 rpm - Hollow clamping device (hydraulic) - Draw tube inner diameter: 104 x 800 mm depth - C axis and spindle brake (hydraulic) Sub-Spindle as integrated synchronous electrospindle ISM 76 - Drive: 25/32 kW (100/40% duty cycle) - Torque: 280/360 Nm (100/40% duty cycle) - Speed range: 0 – 5,000 rpm - Hollow clamping device (hydraulic), draw tube inner diameter 67 mm - C Axis & spindle brake (hydraulic) - Lower slide (Z3), servomotor drive with recirculating ball screw, direct measuring system - Coolant through spindle - Spindle cleaning device Spindle Options Hydraulic through-bore clamping device Ø 104 mm, traction force 105.5 kN for P max 45 bar, n max = 3,600 rpm. Differential pressure for main spindle. Differential pressure for sub-spindle. Power Chuck for Main Spindle Through-hole 3-jaw power chuck, BBD 315/122, manufacturer: SMW – Autoblok. Power Chuck for Sub-Spindle 3-jaw power chuck BBD 210 – 66, manufacturer: SMW Autoblok. Milling Spindle Milling spindle and tool magazine with Capto C6 interface. Tailstock Tailstock function for sub-spindle incl. foot pedal. Mechatronic control with selectable program power. Thrust force: - 2.5 – 6 kN Tool Magazine Chain-type tool magazine with 48 stations, Capto C6 tool interface. Coolant/Chip Disposal Hinged belt chip conveyor, including coolant tank. Rodpfx Afeyxc Arensbw High-pressure coolant system with supply through the milling spindle consisting of: - 980 L coolant tank with band filter system - 8 bar/20 L/min Machine delivered with: • Approx. 50 Capto C6 tool holders with relative tools • 2 cabinets with inserts and various equipment • Instruction manuals and CE declaration

Būklė: naudotas, bendras svoris: 2 700 kg, MAZAK QUICK TURN 8 Serijos numeris: 69867 Gamybos metai: 2010 Įrankių keitiklis: 6 stočių Valdymo sistema: MAZATROL CAM T-2 Svoris: apie 2700 kg Drožlių transporteris: TSL BAKIMOTO D60W150ST-DN Komplektą sudaro: Rbsdpfx Asyxb Hisfnsw Dirbtuvių spinta su staklių priedais Indeksuojami įdėklai Tekinimo įrankiai Staklių laikikliai Žandikauliai spaudimui Varžtų pasirinkimas