Energy Houses

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum double-sided planing height: 200 mm - Electric table height adjustment (up/down) - Maximum four-sided planing height: 100 mm – Top section: - Feed-in roller, toothed - Kickback prevention devices Kjdpfx Apsy T Rhxj Eslt - Pressure bar - 2 toothed feed rollers - Pressure bar - Planing shaft 610 mm, 4-knives, 7.5 kW - Pressure bar - Smooth outfeed roller – Bottom section: - Guide bar - Toothed feed roller - Planing shaft 610 mm, 4-knives, 5.5 kW - 2 smooth feed rollers – Rear: - 2 side spindles + pressure bar 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable (up/down, right/left) - Manual planing width adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Dimensions (LxWxH): 2500x1800x600 mm - Weight: approx. 3000 kg ADVANTAGES – Ideal for processing beams, floorboards, etc. – Manufactured by the German brand KUPFERMUHLE – 2 horizontal planing shafts + 2 vertical spindles – Used planer, condition very good Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Catalogue number 7995 TECHNICAL DATA - Maximum planing width: 240 mm - Maximum planing height: 140 mm 4 spindles: 1) Bottom horizontal: 240 mm, 5.6 kW 2) Right vertical: 140 mm, 5.6 kW 3) Left vertical: 140 mm, 7.5 kW 4) Top horizontal: 240 mm, electrically adjustable up/down 0.37 kW - 7.5 kW - Spindle diameter: 40 mm (all spindles) - All spindles adjustable vertically and horizontally - From above: 5 driven, serrated, swivelling feed rollers (including 1 double roller) - From above: 2 rubber outfeed rollers - From below at the outfeed: split steel feed roller - Pneumatically pressed rollers - 3 lateral pneumatic presser units - Electric table height adjustment: 0.37 kW - Infeed table length: 2080 mm - Infinitely variable feed speed via frequency inverter - Feed via cardan shaft rollers - Feed motor: 3.7 kW - Central lubrication - Extraction port diameters: 4 x 125 mm - Dimensions (LxWxH): 3600 x 1650 x 1700 mm - Weight: approx. 3000 kg ADVANTAGES Kedey T N Ahopfx Ap Eolt – German-made, GUBISCH brand – 4-head configuration – Complete technical documentation (DTR) – Used planer, in very good condition Net price: 32,900 PLN Net price: 7,840 EUR based on 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Catalogue number 7994 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 130 mm 7 spindles: 1) Bottom horizontal: 230 mm, 4 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm (spindles 2 and 3), 11 kW 4) Top horizontal: 230 mm, 5.5 kW 5) Top horizontal: 230 mm, 5.5 kW Top horizontal spindles 4 and 5 adjustable electrically up/down 6) Bottom horizontal: 230 mm, 4 kW 7) Universal: 230 mm, adjustable 360° angle, 5.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - 4 top infeed feed rollers, toothed - 4 top outfeed feed rollers, rubber, smooth finish, including 3 double rollers - 1 metal feed roller from below - Feed drive on Cardan shafts - Pneumatic feed roller pressure - Variable feed speed control via inverter - Feed motor: 3 kW - Working pressure: 6–10 bar - Electric thickness adjustment - Centralized table lubrication - Infeed table length: 1960 mm - Extraction port diameters: 3x120 mm, 4x140 mm - Dimensions (L/W/H): 5360x1800x1660 mm - Weight: approx. 4000 kg ADVANTAGES – German-made, WEINIG brand – With 7 heads – DTR technical documentation – Universal spindle – Used planer, in very good condition Kjdpfxsy T Nu De Ap Eslt Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 6 velenų obliavimo-staklės "SCM" modelis SUPERSET XL V380/50 - "CE" NAUDOTA - LABAI GEROS BŪKLĖS, DAR VEIKIANTI [ID: cvn-088] - 6 velenai: APATINIS/DEŠINYS/KAIRYSIS su CNC/VIRŠUTINIS/APATINIS/UNIVERSALUS - Darbo plotis: 230 mm - Tandeminis įtaisas trumpiems ruošiniams - Greičio motovariatorius - KOMPLEKTUOJAMA SU FREZOMIS Galima įsigyti kol bus parduota. Ksdpfx Apjy T Ndlo Eslt

Būklė: geras (naudotas), Gamybos metai: 2003, Susideda iš: 4 x 6000 mm kryžminių grandininių konvejerių, tvirtinamų prie grindų Kodpfxjy Tzi To Ap Eelt 1 x TRANSLYFT kėlimo stalas, dvigubos žirklės modelis, 4000 x 1000 mm, didžiausia kėlimo galia: 4000 kg 4 x grandininiai konvejeriai, 1000 mm, montuojami ant kėlimo stalo viršaus 1 x THOMAS PETTERSSON TP600 vakuuminis padavimo įrenginys, didžiausias plotis tarp vakuuminių siurbtukų: 4000 mm (gali kelti 6000 mm ilgį) 1 x THOMAS PETTERSSON elektrinis valdymo skydas 1 x varomas juostinis konvejeris, 8000 mm

Būklė: naudotas, Gamybos metai: 2001, Verpalų skaičius: 8 vnt. Darbinis plotis: 230 mm Obliavimo aukštis: 160 mm Padavimo variklis: 5,5 kW Padavimo greitis: 36 m/min Valdymas: Logocom Obliavimo ir profiliavimo automatas Weinig Unimat 3000 Brillant. Kompiuterizuotas profesionalus centras obliavimo ir profiliavimo darbams su CNC valdomomis verpstėmis ir padavimo magazinu Weinig EM11. Valdymo pultas 2021 m. buvo atnaujintas naujausiu Simatic Panel PC677C-15“. Parduodama kliento vardu iš buvimo vietos. Apžiūra galima bet kada iš anksto susitarus. Verpstė 1: Apačioje / HSK Powerlock / 12.000 aps./min. Verpstė 2: Dešinėje / HSK Powerlock / 4.000 - 12.000 aps./min. Verpstė 3: Kairėje / HSK Powerlock / 4.000 - 12.000 aps./min. Verpstė 4: Dešinėje / HSK Powerlock / 4.000 - 12.000 aps./min. Verpstė 5: Viršuje / HSK Powerlock / 4.000 - 12.000 aps./min. Verpstė 6: Apačioje / HSK Powerlock / 4.000 - 12.000 aps./min. Verpstė 7: Viršuje / HSK Powerlock / 4.000 - 12.000 aps./min. Verpstė 8: Apačioje / HSK Powerlock / 4.000 - 12.000 aps./min. Kledpfxjy Ty H Do Ap Ejt Visos verpstės CNC valdomos (išskyrus verpstes 6 ir 8)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2904-3140, Keturių pusių obliavimo staklės su 8 peiliais. Apdirbimo greitis 8–25 m/min. Obliavimo plotis 200 mm, aukštis 140 mm. 1 horizontalus velenas, 2, 3 ir 4 vertikalūs, 5, 6 ir 7 horizontalūs, 8 universalus. 40 mm velenai, 230 mm galvos. 1 variklis 7,5 kW, 2 – 5,5 kW, 3 – 7,5 kW, 4 – 4 kW, 5 – 11 kW, 6 – 11 kW, 7 – 5,5 kW, 8 – 5,5 kW. 4 kW reduktorinis variklis. Kjdsy Tynhopfx Ap Eslt

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Keturių pusių obliavimo staklės SCM Superset XL Kjdpfxey Ttryo Ap Ejlt Darbo plotis: 15-230 mm Darbo aukštis: 6-120 mm Velenų skaičius: 5 Velenų išdėstymas: Apatinis Dešinys Kairys Viršutinis Apatinis Velenų apsisukimų greitis: 6000 aps./min Pneumatiniai prispaudėjai Prietraukimo greitis reguliuojamas variatoriumi: 5-25 m/min Pavara per kardano velenus CE sertifikatas

Būklė: labai geros būklės (naudotas), Catalogue number 6393 TECHNICAL DATA Kledpfx Apjy Ti R Ej Est - Maximum workpiece width: 200 mm - Maximum workpiece height: 150 mm - Number of spindles: 4: 1) Bottom horizontal spindle: 200 mm, 5.5 kW 2) Right vertical spindle: 150 mm, 4 kW 3) Left vertical spindle: 150 mm, 4 kW 4) Top horizontal spindle: 200 mm, 5.5 kW - All heads adjustable up/down, left/right - Spindle diameter: 40 mm - Spindle speed: 6,000 rpm From above: - 6 feeding, toothed rollers (including 2 double rollers) - 1 outfeed, rubber pulling roller From below: - Toothed, feeding, swivelling roller integrated in the lower table - 3 side pressure units - Outfeed, pulling, smooth metal roller - All rollers pneumatically loaded - Infeed table length: 2,130 mm - Table height adjustable up/down - Central lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Stepless feed speed adjustment via inverter - Feed motor: 3 kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameters: 4x130 mm - Overall dimensions (LxWxH): 3,550 x 1,750 x 1,800 mm - Weight: approx. 3,000 kg ADVANTAGES – 4-head configuration – Ideal for wet and dry timber – Technical documentation (DTR manual) – Used machine, very good condition Net price: PLN 65,900 Net price: EUR 15,690 Net price calculated at an exchange rate of 4.2 PLN/EUR (price subject to change with significant exchange rate fluctuations)

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, 1. Wysokowydajna strugarka/profilarka WACO MAXI, 8 głowic 8 wrzecion do podziału poziomego, prędkość podawania 20-150 m/min Szerokość robocza strugania: 30-300 mm Wysokość robocza strugania: 10-150 mm Krąg tnący: 180-260 mm Napięcie zasilania: 400 V, 50 Hz Główny silnik posuwu: 37 kW Przemiennik częstotliwości: 45 kW Kledpsy S R Agsfx Ap Ejt 1. Głowica dolna – 24,5 kW 2. Głowica górna – 30 kW 3. Głowica prawa boczna – 18,5 kW 4. Głowica lewa boczna – 30 kW 5. Głowica prawa boczna – 18,5 kW 6. Głowica lewa boczna – 24,5 kW Podział poziomy: 7. Głowica prawa boczna – 53 kW 8. Głowica lewa boczna – 53 kW Maks. szerokość obróbki: 200 mm Maks. wysokość obróbki: 63 mm Maks. średnica tarczy pilarskiej: 300-400 mm Średnica wrzeciona: 50 mm Regulacja pionowa: 10 mm Obroty wrzeciona: 5 500 obr/min Przyłącze odciągu: 2 x Ø 160 mm Długość jednostki: 1300 mm 2. Wysokowydajna strugarka/profilarka WACO MAXI, 3 głowice 3 wrzeciona do wykańczania, prędkość podawania 30-300 m/min Główny silnik posuwu: 37 kW Przemiennik częstotliwości: 45 kW Prędkość podawania, regulowana: 30-300 m/min 1. Głowica profilująca: 24,5 kW 2. Głowica górna: 24,5 kW 3. Głowica Rotaplan: 30 kW

Būklė: naudotas, Gamybos metai: 2002, 5 stotelės + 1 frezavimo agregatas Skaitmeninis padėties nustatymas Stalų tepimas Stalai su oro pagalvėmis Talpa: 230 mm / 120 mm Kedpfx Ajy S Rkqop Eslt Bendra galia: 43 kW 380 V Įrengta 4 spiraliniais frezos laikikliais su plokštelėmis Įrenginio dokumentai ir aptarnavimo raktai Suremontuota mašina, prieinama iš sandėlio

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, darbinis plotis: 260 mm, obliavimo aukštis: 170 mm, ašies skersmuo: 40 mm, obliavimo plotis: 260 mm, darbinio aukščio: 170 mm, padavimo variklio galia: 4 000 W, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 6 000 aps./min, Įranga: kabina, variklio stabdis, Weinig Profimat 23 E Darbinis plotis: 260 mm, Darbinis aukštis: 170 mm, 5 velenai, Veleno skersmuo: 40 mm, Velenų išdėstymas: Klsdoy S E Spopfx Ap Ejt 1- Apačia – 5,5 kW 2- Dešinė + 3- Kairė – 11 kW 4- Viršus – 5,5 kW 5- Apačia – 11 kW Padavimo greitis: 6 – 24 m/min - 4 kW Oro pagalvė stalo viduje Viena varoma ritinėlis išėjimo stalo dalyje. Su įrankiais.

Būklė: naudotas, Weinig brand moulder, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used. Kjdpfoy S Acxox Ap Eslt

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Keturių pusių obliavimo staklės SCM Superset XL Darbinis plotis: 15-230 mm Darbinis aukštis: 6-120 mm Velenų kiekis: 6 Velenų išdėstymas: Apačia Ksdpfx Apoy Sr Nnj Eslt Dešinė Kairė Viršus Apačia Universalus/stiklo juostelės pjūklei Velenų sukimosi greitis: 6000 aps./min. Pneumatiniai spaustuvai Padavimo greitis reguliuojamas dažnio keitikliu: 5-25 m/min Pavaros per kardaninį veleną CE sertifikatas

Būklė: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Surfacing table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Dimensions (L x W x H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Side Planer Profimat 23 Window Version with glazing bead separation or can be used as grooving spindle ATS control and program control system --- Summary of Technical Specifications (Please inquire for any additionally included accessories) --- General --- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 units > Surfacing table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle Arrangement --- > Spindle 1: Bottom > Spindle 2: Right, pneumatically controlled up/down > Spindle 3: Left > Spindle 4: Top > Spindle 5: Bottom > Spindle 6: Glazing bead saw, pneumatically controlled up/down Spindle Specifications --- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Further Features --- > Glazing bead separation or usable as grooving device > ATS control system with automatic 2-axis positioning for width and height (left and top spindle), program memory for 99 programs > Machine operation: Window package > Joint control of right spindle and glazing bead discharge via manual selector switch on control panel > Spindles with mechanical digital readout --- Price for the above-mentioned machine on request! --- Kledpfx Apjy Spvrj Eot Option: Used planing heads available --- (Technical data as provided by manufacturer – subject to confirmation!)

Būklė: naudotas, Gamybos metai: 2013, Number of spindles: 5 pcs. Working width: 20 - 230 mm Planing height: 8 - 120 mm Length of jointing table: 2500 mm Feed motor: 1.1 kW Feed speed: infinitely variable, 2-12 m/min Machine weight: approx. 2500 kg 1 WEINIG Planer & Moulder VARIOMAT Short summary: ----- - 5 spindles - Powerful motors - Synchronized jointing - MemoryPLus control system - Option: Stähle-Hess Saturn single piece wood sanding machine Technical Manufacturer Description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle, horizontal bottom ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool diameter: 125 - 145 mm Axial adjustment: 5 mm Rabbet device including rabbet cutter 2nd spindle, vertical right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool diameter: 93-232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence: 180 mm Maximum profiling depth: 45 mm Axial adjustment: 30 mm Insert segment, incl. additional fence lip 125 mm Insert segment, incl. additional fence lip 150 mm 3rd spindle, vertical left ----- Shared motor with 1st (right) spindle Diameter: 40 mm Shared speed with right spindle Tool diameter: 93-232 mm Maximum profiling depth: 45 mm Minimum profiling depth at tool diameter 200 mm: 20 mm Axial adjustment below table: 30 mm Insert segment 125 mm Insert segment 150 mm 4th spindle, horizontal top ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool diameter: 125-200 mm Maximum profiling depth: 30 mm Minimum profiling depth at tool diameter up to 200 mm: 20 mm Axial adjustment: 30 mm 5th spindle, horizontal bottom ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Kjdpfxsy Spvfo Ap Ejlt Tool diameter: 125-200 mm Maximum profiling depth: 15 mm Axial adjustment: 10 mm Table plates for wood inserts at lower spindle Additional discharge plate over the lower spindle for wood inserts Feed system ----- Feed with frequency control, 1.1 kW, infinitely adjustable 2-12 m/min Double pendulum opposite left spindle Axial travel of feed rollers opposite left spindle, 35 mm Durofer spray-tooth feed rollers Pneumatic pressure for feed rollers, including water separator Synchronized jointing to assist manual planing. The infeed roller releases after the second feed roller has engaged the workpiece. Once the workpiece leaves the second feed roller, the infeed roller is reset for the next workpiece. Other Features: ----- MemoryPLUS control Width and height controlled (spindles 3 and 4 with CNC-controlled radial axes) Price for the above-mentioned machine on request! OPTIONAL at extra charge Stähle-Hess Saturn #7008: Machine has been used together with Stähle-Hess Saturn Duo single piece wood sanding machine, stock no. #7008 (Technical data as per manufacturer's information - subject to change without notice!)

Būklė: naudotas, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Joiner table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 500 with grooving table ----- Machine will arrive in stock, cleaned, and fully checked. Short summary: ----- - 5 spindles - 8,000 rpm - Grooving guide for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller on the outfeed table, hardened: 210 mm wide - Left and top spindles adjustable for width and height - Quick-release spindle nut Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st spindle - bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool cutting circle: 125 - 180 mm Cutting circle for rebate cutter: 130 - 160 mm Axial adjustment: 17 mm Rebate unit MarathonCoating for table insert before the first lower tool holder 2nd spindle - right Kodpfxsy Spu Ue Ap Eolt ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool cutting circle: 93 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Radial adjustment: Min. tool diameter at fence level: 93 mm Max. tool diameter behind fence level: 200 mm 3rd spindle - left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool cutting circle: 93 - 200 mm Cutting circle for straight knife heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 55 mm Pressure shoe before the left spindle incl. 2 lateral pressure rollers, spring-loaded Radial spindle movement CNC-controlled 4th spindle - top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool cutting circle: 93 - 200 mm Cutting circle for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Radial spindle movement CNC-controlled Split pressure shoe before the upper tool holder, adjustable to tool cutting circle and can be swung away from the tool, spring-loaded. 5th spindle - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool cutting circle: 93 - 225 mm Max. profiling depth: 15 mm Axial adjustment: 35 mm Radial adjustment: Min. tool diameter to table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, continuously adjustable with brake: 4 kW, 5 - 30 m/min Infeed roller before the first lower tool pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Axial adjustment of feed rollers relative to left tool holder, 35 mm Reduced roller distance to right tool Machine electrics ----- Operating voltage 400 V (voltage range 380 - 420 Volt), 50 Hz. Machine base, tables, and fences ----- Joiner table: 2500 mm length (including straightening guide)...

Būklė: labai geros būklės (naudotas), Catalogue number 7640 FEATURES – The best wide planer for both wet and dry wood – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured in Germany by KUPFERMUHLE – Used planer in very good condition TECHNICAL SPECIFICATIONS - Maximum planing width: 610 mm - Maximum planing height: 200 mm - Top section: - Powered infeed shaft, toothed - Pawls - Pressure unit - 2 driven shafts, toothed - Pressure unit - Planing shaft 610 mm, 6 knives, 15 kW - Pressure units - Outfeed shaft, smooth, powered - Bottom section: - Side pressure at infeed - Guide rail - Infeed table - Driven shaft, toothed - Planing shaft 610 mm, 6 knives, 7.5 kW - 2 driven shafts, smooth - Side pressure at outfeed - Rear section: 2 vertical spindles + pressure units: 1) Right vertical 200 mm, 15 kW 2) Left vertical 200 mm, 15 kW - Left vertical spindle electrically adjustable (right/left) - Spindle diameter: 40 mm - Alternately adjustable spindle position - Spindles adjustable up/down, right/left 3) Additional bottom horizontal spindle 160 mm, adjustable up/down + right/left, 5.5 kW - Spindle diameter: 35 mm - Outfeed: 2 upper metal slip rollers, 2 lower driven rubber rollers - Adjustable rollers in bottom table - Electric planing height adjustment - 6 feed speeds: 12.8/16.3/20/25.6/32.6/40 m/min - Feed drive motor: 8 kW - Extraction port diameters: 2×120, 2×160 mm - Dimensions (LxWxH): 2980x1980x1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (based on the rate of 4.2 EUR) (Prices may change with higher fluctuations) Ksdpfsy Sny Ajx Ap Eelt

Būklė: geras (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 250 mm, obliavimo aukštis: 125 mm, ašies skersmuo: 35 mm, Keturių pusių obliavimo staklės GUILLIET su 250 mm pločio stalu, sustiprinti varikliai, ilgas stalas Kedpfsy Sk Aysx Ap Ejlt

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, Weinig H1000 obliavimo staklės su E3 padavimo ir A3 nuėmimo mechanizacija Weinig Hydromat 1000 su 5 velenais (2012 m.). Atskiras elektrinis valdymo skydas Atskiras nuotolinio valdymo pultas Automatinė lovų tepimo sistema Atminties sistema Pilnas garso izoliacinis gaubtas Weinig E3 obliavimo staklių padavimas + pakuotės žirklinis keltuvas (3000 kg). Weinig A3 lapo nuėmimo linija + pakuotės žirklinis keltuvas (3000 kg) + pakuotės nuėmimo grandininis konvejeris. Klsdpfx Aoy Sgzxsp Ejt WEINIG HYDROMAT 1000 Maksimalus ruošinio dydis – 230x160 mm Nr. 1: 7,5 kW – apatinis, 6000 aps./min., su papildomu guoliu ir tiesiu obliavimo peiliu Nr. 2: 7,5 kW – dešinys, 6000 aps./min., su profiliavimo peiliu Nr. 3: 7,5 kW – kairys, 6000 aps./min., su profiliavimo peiliu Nr. 4: 7,5 kW – viršutinis, 6000 aps./min., su papildomu guoliu ir tiesiu obliavimo peiliu Nr. 5: 7,5 kW – apatinis, 6000 aps./min., su papildomu guoliu ir tiesiu obliavimo peiliu 50 mm velenai Transportavimo sija – 0,55 kW Visi dokumentai pridedami. Ištraukimo kolektorius pridedamas. Yra galimybė įsigyti obliavimo stakles arba mechanizaciją atskirai pagal poreikį.

Būklė: geras (naudotas), Weinig Hydromat H23, 8 Spindeln 50 mm Spindeln, 6.000 U/min Unten: 7,5 kW Hobelaggregat, einsatzbereit Rechts: 7,5 kW Geradhobelaggregat, einsatzbereit Links: 15 kW Gerad- und Profilhobelaggregat, einsatzbereit Rechts: 11 kW Profilhobelaggregat, einsatzbereit Oben: 15 kW Hobelaggregat, einsatzbereit Unten: 18,5 kW Hobelaggregat, einsatzbereit Oben: 11 kW Gerad- und Profilhobelaggregat + Lagerbock Unten: 7,5 kW Gerad- und Profilhobelaggregat + Lagerbock 7,5 kW Vorschubmotor Automatisches Schmiersystem Vollständige, schallgedämmte Industriestahlhaube Zufuhr- und Abförderer für den Hobel auf Wunsch lieferbar. Werkzeugausstattung kann auf Anfrage angeboten werden. Kedpoy Sgy Uofx Ap Ejlt

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, ašies skersmuo: 40 mm, obliavimo plotis: 260 mm, darbinio aukščio: 160 mm, veleno greitis (min.): 7 000 aps./min, Wenig Powermat 700 6 velenai 260 mm pločio Kledpfx Aoy R U Sisp Est 160 mm aukščio Veleno skersmuo 40 mm 7 000 aps./min Padavimo greitis 5–40 m/min Apatinis variklis 11,0 kW Dešinysis + kairysis kombinuotas variklis 11,0 kW Viršutinis variklis 11,0 kW Viršutinis variklis 7,5 kW Apatinis variklis 7,5 kW Radialinis CNC valdomas kairiojo ir viršutinio velenų reguliavimas ir padėtis Marathon danga staklių stalams ir kreiptuvams (išskyrus padavimo stalą) Padavimo stalas 2,5 m Memory-Plus operacinė sistema

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 6679 TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Lower horizontal spindle, 250 mm, 5.5 kW 2) Right vertical spindle, 170 mm, 5.5 kW 3) Left vertical spindle, 170 mm, 5.5 kW 4) Upper horizontal spindle, 250 mm, 7.5 kW 5) Lower horizontal spindle, 250 mm, 7.5 kW 6) Universal spindle, 250 mm, 360° adjustable, 5.5 kW - 6th spindle electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - 6 upper infeed traction rollers, toothed, including 2 double rollers - 6 upper outfeed traction rollers, rubber, smooth, including 2 double rollers - 2 upper pressure shoes - Lower infeed toothed traction roller, swiveling table, positioned before the first spindle - 2 lower outfeed traction rollers, metal, smooth - 4 lower side pressure shoes - Feed via Cardan shafts - Rollers pneumatically loaded - Infinitely variable feed speed via inverter, 6-30 m/min - Feed motor: 4 kW - Working pressure: 8-10 bar Kodpfey Rzkfox Ap Ejlt - Electric planing thickness adjustment - Table lifting motor: 1.1 kW - Central table lubrication - Infeed table length: 2180 mm - Extraction port diameter: 6 x 150 mm - Dimensions (L/W/H): 5000 x 1800 x 1900 mm - Weight: approx. 4600 kg ADVANTAGES – Italian manufacturing – 6-head configuration – Operating manual & CE documentation – Ideal for wet and dry wood – Universal spindle – Excellent condition / like new Net price: 134,900 PLN Net price: 32,100 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price subject to change in the event of significant exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Catalogue number 6765 TECHNICAL DATA: - Maximum workpiece width: 230 mm - Maximum workpiece height: 160 mm Number of spindles: 4: 1) Bottom horizontal 230 mm, 5.5 kW 2) Right vertical 160 mm, 5.5 kW 3) Left vertical 160 mm – electric adjustment left/right from the control panel, 5.5 kW 4) Top horizontal 230 mm – electric adjustment up/down from the control panel, 7.5 kW - All spindles adjustable up/down, left/right Kledpfx Aoy Rzgyep Ejt - Spindle diameter: 40 mm From above: - Feed roll-in shafts, toothed, 6 pieces including 2 double - Roll-out shafts, pulling, rubber-coated, 2 pieces From below: - Roll-in shaft, metal, toothed pulling, swivelling in the lower table + - Roll-out shaft, metal, smooth pulling - Pneumatically adjustable rollers - Infeed table length (with pneumatic infeed unit): 3390 mm - Possibility of operation without engaging the pneumatic infeed unit, table height adjustable up/down - Central lubrication - Electric planing thickness adjustment - Stepless feed speed adjustment - Feed drive on Kardan shafts - Feed motor: 4 kW - Enclosed in cabin - Extraction port diameters: 4 x 120 mm - Dimensions (L x W x H): 7000 x 1950 x 1700 mm - Weight: approx. 3000 kg – For wet and dry wood – Pneumatic infeed unit on infeed table – Used planer, in very good condition Net price: 83,900 PLN Net price: 19,980 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7556 Technical Specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal 240 mm, 5.5 kW 2) Right vertical 160 mm, 5.5 kW 3) Left vertical 160 mm, 5.5 kW 4) Top horizontal 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm Top side: Kljdpfxey Rzf No Ap Est - 6 powered infeed rollers, toothed, including 2 double rollers - 2 powered outfeed rollers, smooth rubber Bottom side: - Side pressure before and after the roller in the bottom table - Powered, toothed, swivel infeed roller in lower table before the first spindle - 2 pneumatic side pressure units - Powered metal outfeed roller, smooth - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table height adjustable - Central lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Variable feed speed via inverter: 6-30 m/min - Feed motor: 3 kW - Feed via Cardan shafts - Fully enclosed cabin - Extraction port diameters: 4x150 mm - Dimensions (LxWxH): 3750x1750x1800 mm - Weight: 3300 kg ADVANTAGES - Equipped with 4 heads - Ideal for wet and dry wood - Used machine, in perfect condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)