M-TECO, Sp.z o.o.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 19500484, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 50 000 h, Įrenginys vis dar veikia, parduodamas, nes atvyksta naujas įrenginys. Dcodpfx Afsy Nzbus Ajg Įrenginys parduodamas pigiai, nes mums skubiai reikia vietos, kaina yra skubi.

Būklė: naudotas, Gamybos metai: 2012, Nr. 3268 Cutting and Machining Centre Schirmer BAZ 1000-G6 / VU “Basic” Used, year of manufacture 2012 Comprising: - Cutting and machining centre Schirmer BAZ 1000-G6 / VU “Basic” - Steel cut-to-length machine Schirmer SZA 450 - Buffer screwing station Schirmer - Bar machining centre Schirmer SBZ I Cutting and Machining Centre Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length: 300 – 3900 mm - Automatic loading magazine for 9 profiles up to max. 6500 mm in length - Automatic transfer station - Infeed unit for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device including optimization software - Automatically adjustable profile guides - Machining station equipped as G-module “Ultra Speed” Dedpfoy Nnnnex Af Aocg Machining operations on the PVC profile: - Drainage and ventilation slots/holes in frame, sash, and mullion profiles, handle drilling for entrance doors, striker plate markings, lock case routing - Height measuring device for detecting profile tolerances - Gasket cutting device - VU saw unit with double saw aggregate 2x 45° - Saw unit in standard version with 1 sawing aggregate, swiveling +45° to -45° - Conveyor belt for scrap removal - NC controlled gripper for bar discharge, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Win XP Prof., software: TwinCAT NCI - Horizontal circulating buffer for transporting the profiles to the steel infeed station and screwing station for steel infeed with 8 infeed slots - Monitor for steel length display - Automatic label printer Steel Cut-to-Length Machine Schirmer SZA 450 - Automatic loading magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Infeed unit - Standard saw unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in steel loading magazine Buffer Screwing Station Schirmer - Infeed unit for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screwing station - Steel infeed fingers for reinforcement profiles up to 200 mm insertion depth Bar Machining Centre Schirmer SBZ I - Infeed unit for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Measuring probe for automatic determination of the datum point at the profile start - Drilling station with 4-axis CNC control, 2 axes vertical, 1 axis horizontal, and 1 axis for X-feed - NC controlled gripper for bar discharge - Belt conveyor in special version for cross-rejecting - Striker plate visualization software including monitor - Screwing station with screw feed - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed System capacity: Approx. 120 window units 1400 x 1500 mm / 8 hours If the machine is expanded with another screwing unit at the buffer screwing station, output increases to approx. 160 units / 8 hours Sale by customer order, ex location near 30625 Hannover, without dismantling, without transport or installation To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended For used machines, all warranties are excluded; sale is subject to: “as viewed”

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, STAKO APDIRBIMO CENTRAS Federhenn SBZ 150 G, tipas 81.25K150, skirtas apdirbti supjaustytus profilio strypus su įstatyta plienine armuote. Mašina iš esmės susideda iš: PAGRINDINĖS MAŠINOS BAZĖS, pagamintos iš tvirtos suvirintos plieninės konstrukcijos. 1 vnt. LINEARINIS MODULIS su griebtuvu tiksliam profilio strypų padėties nustatymui. VALDYMO SPINTA su visais elektroniniais ir pneumatiniais komponentais, aprūpinta gręžimo agregatais šioms operacijoms: - kaiščių angų gręžimas - skersinių angų gręžimas – tvirtinimo angų gręžimas. IŠTRANSPORTAVIMO ŽNYPLĖS, sumontuotos ant linearinės ašies, strypų padėjimui ant skersinio konvejerio modulio. IŠTRANSPORTAVIMO MODULIS profiliams iš SBZ apdirbimo įrenginio per juostinį konvejerį. Strypai paimami rankiniu būdu konvejerio gale, įskaitant užimtumo stebėjimą stalo gale. Standartinis modulio ilgis: apie 3 000 mm. APSAUGINĖS TVOROS, VARŽTŲ MAGAZINAS ir išorinis suktuvas. Dsdpfx Aey Dtg Eef Ascg

Būklė: reikia remonto (naudotas), Gamybos metai: 2000, Parduodamas Elumatec SBZ 610 pjovimo ir apdirbimo centras. Įrenginys buvo iš anksto paleistas. Reikalingas remontas. Dedpfx Afey Avylj Ajcg

Būklė: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 500 mm, Pilnai automatinis CNC pjovimo centras CAT500 Mašina veikianti, paruošta darbui diskinio pjūklo diametras: 500 mm pjovimo kampai: -45°/90°/+45° operatoriaus pultas su Windows Darbo kryptis iš dešinės į kairę Dcedpfx Afsx Ez Igj Aog Drožlių ištraukimas Atliekų transporteris Etikečių spausdintuvas

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, IN-STOCK MACHINE: Working direction from left to right - Subject to prior sale - HECHT Exenso Profi Saw Cutting Center ESA-9 Comprising: Infeed: - Robust aluminum construction in proven profile design - Ergonomically adjustable working height from 985 to 1055 mm - Raw bar length from min. 400 mm to max. 6,000 mm (optional extension kit up to 6,500 mm available) - Material feed via chain conveyor for automatic allocation of 9 compartments - Working direction from left to right Professional Cut-Off Saw: - Bandsaw automatic system with pneumatic clamping system consisting of 3 clamping elements - Continuously adjustable feed rate via hydraulic unit - Workflow controlled via Exenso control system - The sawing area is safeguarded from the front by a light curtain - Saw blade drive: 1.5 kW, frequency-controlled - Saw blade dimensions: HBS 250 G 3320 x 27 x 0.9 mm, long service life - Cutting speed: in standard operation 15-110 m/min - Cutting range: width 10-120 mm, height 10-80 mm Outfeed: - Robust aluminum construction in proven profile design - Ergonomic removal height from 760 to 820 mm (Note: not independently adjustable from working height) - Part outfeed via powered roller conveyor with steel roller design - Roller-guided ejection unit over three levels onto an inclined removal table - Maximum part length via automatic outfeed: 3,500 mm (optionally available extension kit for up to 4,500 mm working length) - Waste disposal via ejector unit – max. length 600 mm - Waste falls via chute into customer-provided waste container (Note: waste container not included) - Remnant identification marked at storage position for manual placement by the operator Software / Data Interface: - HECHT Software Exenso ESA (version specified after joint acceptance) Operating Procedure: - Reinforcement bars are placed by the operator according to specifications/display onto the loading magazine in the infeed - Data transmission via integrated data interface from customer-side window construction software for the required lengths of the PVC cutting center - Steel is automatically loaded and fed in - Optimized cutting to specified length - Transfer of steel to removal position in the outfeed - Optional double-cutting possible after inspection Scope of Delivery: - Bandsaw - Infeed - Outfeed - Light curtain - Control unit with Win 10 and 15" touch screen - Data interface REST API can be adapted to an existing cutting center after inspection - The unit is dismantled into several packages for transport Includes: 540.1082 1 pc. safety fence wall connection set with door switch ESA/SSA, usable right and left 723.5011 1 pc. saw blade M42 3320x27x0.9 12-16 TPI, fine 942.5541 1 pc. minimum quantity lubrication for ESA & SSA saw systems, noticeably increases saw blade service life Includes: minimum quantity lubrication nozzle, 1 l lubricant, lubricant holder, filter for protection against contamination 829.0201 1 pc. buffer monitor for ESA/SSA steel terminal, additional display Dedpfsxft I Ajx Af Aocg

Būklė: naudotas, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 25019, Funkcionalumas: visiškai funkcionalus, Schneid- und Bearbeitungszentrum STUERTZ STBAZ-IPT 40000-S-V Gebraucht, Baujahr 2000 Vollautomatisches CNC-Säge- und Bearbeitungszentrum für PVC-Kunststoffprofile, mechanisch für dieses Alter in sehr gutem Zustand. Sägen, Bearbeiten, Verschrauben der Verstärkung, Durchbohren der Stahlverstärkung, Etikettendruck. Datenbank mit Profilen von Gealan, Rehau und Aluplast Dedsw Edyfjpfx Af Aocg Dokumentation sowie zusätzliche Fotos und Videos verfügbar. Montage und Inbetriebnahme können von uns durchgeführt werden.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Maximum profile width: 140 mm Maximum profile height: 190 mm Maximum bar length: 6,500 mm Drilling units: 2 Number of milling spindles: 3 Suitable for aluminium Number of clamps: 4 Dcodem H Ud Ujpfx Af Aeg Maximum feed rate: 65 m/min Stepless feed adjustment Automatic loading: Yes CE mark CE Declaration of Conformity

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and corner-processing operations within the technical capabilities specified in the manual for parts made of plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastics, composites, and aluminium. The vertical work table ensures easy loading and unloading of workpieces, while also limiting the machine's maximum dimensions to the necessary minimum. Tool changes are performed using a 10-position tool magazine located on the side of the machine, allowing for various operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speeds (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): up to 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): up to 2,800 Djdemzbr Sspfx Af Ascg

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: 2026, AUTOMATIC STEEL CUTTING MACHINE with ONLINE PC CONTROL 350 Fully automatic steel cutting machine for reinforcement steel cutting in single or double cuts depending on requirements. Optimized cutting with leftover length utilization. Dcodscmqkmepfx Af Aeg The system consists of an automatic loading magazine with 12 slots, a steel saw, and a belt conveyor for transporting the cut steel profiles. Remaining lengths are sorted by size into a leftover bin, outfeed, or waste bin. The processing of the steel profiles takes place via continuous feed; here, the steel rod is precisely positioned by a transport gripper equipped with a linear motor and rotary encoder. Saw cutting is performed from above, and a micro-dosing coolant/lubrication system ensures optimal saw blade cooling. Profile clamping is pneumatic and independent of profile cross-section. Free-standing system with PC control, or can be combined with a cutting machine, plastic machining center (BAZ), or fabrication center (SBZ). When combined, the cycle synchronizes with the cutting machine, BAZ, or SBZ. Profile lists for storage in the loading magazine are displayed to the operator on a TFT screen. The finished, processed steel profiles are removed from the belt conveyor, confirmed, and sorted into trolleys or manually inserted into PVC profiles at the steel insertion station. New machine. Delivery time: 10 weeks.