CBG Beteiligungs- und Verwaltungs GmbH

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, veikimo valandos: 3 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 860, Pjovimo staklės, kurių pajėgumas nuo 20x60 mm iki 300x450 mm, staklių ilgis – 18 m. Klodpfx Ajych Hijf Isl

Sąlyga: naujas, Gamybos metai: 2026, Industrial edgebanding machine The edgebander's design ensures perfect application of 35 mm edging tape, with a thickness range of 7.5–60 mm, covering edge-banding needs for a variety of cases, such as missing corners or void spaces. It is also designed for the special structure of door panels, so edging can be applied without additional processing. Total power: 34.5 kW Minimum workpiece length: ≥ 120 mm Minimum workpiece width: ≥ 35 mm Workpiece thickness: 7.7 – 60 mm Edgebanding tape thickness: 0.4 – 3 mm Feed speed: 18/22/26 m/min Minimum workpiece size: 300 x 35 mm Weight: 5,130 kg Kljdpfjyb Rxlox Af Ijl Dimensions: 10,000 x 1,050 x 1,930 mm 6-Sided CNC Drilling Machine - ND612DTL The ND612CTL is an upgraded model capable of six-sided drilling, front/rear grooving, front milling, side milling, and side grooving. It also processes special features such as cable channels, Lamello joints, LogiClip connectors, and upper/lower hinge mortises, meeting various process requirements and providing maximum flexibility for single batch production. The machine is equipped with an upper and lower drilling block, a main 5.5 kW ATC8 spindle, and a 2+8 tool changer magazine.

Sąlyga: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Schmidler S4 Joinery Line - 4-strand transverse infeed conveyor (inclined upwards) - Infeed roller conveyor - Edge turning device integrated into the infeed roller conveyor - Zero-point detection - Electronically controlled under-table swing cut-off saw Saw blade diameter: 710 mm Rotation: 360 degrees Tilt: 0–65 degrees - Scrap wood pusher - Marking pen horizontal (from below) and vertical (from behind) - Universal milling unit incl. finger-joint cutter and dovetail milling cutter head - Horizontal drilling unit – rafter nail drilling unit - Vertical drilling unit - Profiling spindle moulder, vertical below, for inner radii - Powered outfeed roller conveyor - Pneumatic push-off gauge - Transport and measuring system - Control unit incl. color display Maximum component dimensions: Height: 300 mm Width: 400 mm Length: approx. 12,000 mm 4-Side Planer – Schmidler Minimum component dimensions: Height: 30 mm Width: 50 mm Feed speed: 9/18 m/min Planer shaft diameter = 140 mm Four-sided chamfering unit Infeed roller conveyor Outfeed roller conveyor with push-off gauge and discharge rods Machine in good used condition, fully functional and operational. Kedpfsya Dc Isx Af Ijll The machine can be inspected by appointment. Available for sale immediately or by arrangement.

Sąlyga: labai geros būklės (naudotas), Hundegger K2 Industry CNC Timber Framing Machine, 5-axis 5-axis machining capabilities – Maximum machining section: 300 x 620 mm Machining operations include: section probe and detector, section measurement – Cutting: all straight cuts and any angle, horizontal and vertical, birdsmouth, valley and hip cuts, notches, half-lap joints, chamfers, grooves, concealed birdsmouth groove (straight and angled), web slot – Milling with aggregate units (Bouffe-tout type) and other cutters, tenon milling, mortising, rebates, scarf joints, straight and angled dovetails, Gerber splices – Drilling straight and at any angle, long bit drilling – Equipped with 1 side and 1 underside drill. Ink marker – Wooden parts identification labels Control console and software: The control system allows importing data from CAD software and automates the programming of complex machining processes. The machine is currently operated with CADWORK software (not included in the sale). The machine features a built-in pit for efficient removal of wood offcuts and sawdust. This HUNDEGGER K2 CNC is fully refurbished and updated! Dimensions: • Machine: Length 22,900 mm x Width 5500 mm x Max Height 2550 mm (on floor) • Pit: approx. Length 12,000 mm x Width 2400 mm x Depth 950 mm • Timber infeed length: 13,000 mm • Maximum output timber length: 13,000 mm • Cross infeed conveyor: 5 chains, 2,200 mm • Extendable timber support table • AQF chain with arbor extension, 2,900 mm • Pivoting under-table crosscut saw • Right-side protective flap Waste ejection system – Control for waste disposal system – Universal 5-axis milling unit with profiling tool, dovetail cutter, multiple finger-joint cutter, combined vertical tool holder, drilling unit, finger-joint cutter, combined horizontal tool holder, rebate unit / Drilling units 1 and 2 – Marking device – Pneumatic beam turning station – 7-arm outfeed table. Kedpfx Afjx U Ti Ue Isll Year of manufacture: 2003; acquired by current owner in 2020. Fully reconditioned in 2020: electrical, mechanical, pneumatic systems, tooling and IT (disassembly of parts and motors, replacement of ball bearings, hoses, cables, guide rails, software update and EKP data export, cleaning, new tooling in 2020). The machine is in very good technical and visual condition.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, padavimo ilgis X ašis: 13 000 mm, pjūklo disko skersmuo: 800 mm, darbinis ilgis: 13 000 mm, Įranga: apsaugos šviesos užtvara, We are offering this very well-maintained Hundegger K2i-625 (UF5) CNC joinery machine, year of manufacture 2013. Fully automatic timber infeed with infeed roller conveyor and loading & supply conveyor Under-table crosscut saw 11 kW Universal milling unit, 4-axis (UF4) Combination support for vertically operating tools Drilling unit 2.2 kW – vertical drilling direction Combination support for horizontally operating tools Kodpfxjx Trllj Af Iell Drilling unit 2.2 kW – horizontal drilling direction Fully automatic hydraulic beam turning station Transport and positioning device "two-hand system" including machine frame Electronic controls with EKP software Refined machine surface Extension for cross infeed conveyor and roller conveyor for timber lengths up to 13 m 5-axis universal milling unit – UF5 (surcharge versus 4-axis) Drilling unit 2.2 kW – horizontal drilling direction Marking device in front (operator side) InkJet 4 System HP – stop side Remote maintenance (incl. portable video camera) Control unit for extraction system with operating buttons Extension for roller conveyor on the outfeed side Replacement saw blade 800 mm Dovetail cutter 60x35x16 mm (with reversible knives) If you have any questions or require further information, feel free to send us a message or give us a call.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 450 mm, Įranga: apsaugos šviesos užtvara, TECHNINĖS DETALĖS Darbinis plotis: 450 mm (ribotas apdirbimas galimas iki 520 mm) ĮRANGA - Saugos šviesos užuolaida - Pjūklas - Universalus frezavimo įrenginys su voleliu - Kregždėnų uodegos freza - Pirštų freza - Gręžimo agregatai 1x horizontaliai + 2x vertikaliai - Pjovimo įrenginys - Žymeklis atraminėje pusėje Klodpjx I A A Dofx Af Iol - Automatinė sijos apvertimo stotis - Medienos ilgis dabar apdorojamas įtraukiant iki 16 m - Valdymo kompiuteris su EKP programa įtrauktas

Sąlyga: geras (naudotas), Sls 280 pneumatinė konstrukcijų pjovimo staklė su besisukančiu stalu ir ritininiais takais Klsdsx Il Rwspfx Af Iel

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1779, K1 buvo perstatyta 2020 metais ir aprūpinta naujausiomis saugos priemonėmis. Šiuo metu ji išmontuota ir gali būti iš karto pakrauta. Kedpfx Ajx Ehmajf Ioll

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Hundegger K2 450 Joinery Machine (UF5) with Good Equipment, Well-Maintained and Reliable. For sale is a Hundegger K2 joinery machine in good, regularly serviced condition. The machine comes from a well-kept working environment and has always been professionally maintained and cleaned. Manufacturer: Hundegger Model: K2-450 (UF5) Year of manufacture: 2006 Equipment: - Machine length: 11.76 m - Infeed: 8.51 m - Maximum timber length, loading: 14.5 m - Maximum timber length, unloading: 13.0 m - Color: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m, with flat link chain - Infeed strand with shaft extension: 2.2 m - Extendable timber support - Under-table pivoting crosscut saw - Alternative chip/disposal box - Control for chip extraction/disposal unit Ksdpfx Asx Azrkof Isll - Universal 5-axis milling unit UF5 - Roller cutter - Finger milling cutter - Dovetail cutter - Combination support for vertically operated tools - Boring unit 2.2 kW - Boring unit 3.0 kW - Finger milling cutter - Combination support for horizontally operated tools - Boring unit 2.2 kW - Swiveling boring unit - Slotting unit 900 mm, double-sided guide - Longitudinal and cross-grooving cutter - Marking and labeling device integrated in the table - Hydraulic beam turning station - Roller conveyor with pusher, 5.30 m - Network connection Availability: Fall 2026 Location: Austria Price: On request All information is subject to confirmation; intermediate sale reserved. Sale ex location. No guarantee or warranty. Inspection and test run possible by arrangement. If interested, please contact us – we are happy to answer any further questions.

Sąlyga: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, CNC-Produktionseinrichtung für Blockhausbau FORMA MBL Die CNC-Linie FORMA MBL ist für die schnelle und hochpräzise Bearbeitung von Wandelementen für sowohl Brettschichtholz- als auch Massivholzblockhäuser konzipiert. Das System arbeitet mit Cadwork-Software (IFC-basiert). Materialkapazität • Balkendicke: 120–240 mm • Balkenhöhe: 120–240 mm • Maximale Werkstücklänge: 7,5 m Die Linie ist mit einem hydraulischen Hubtisch und einer automatischen Zufuhr ausgestattet, was eine effiziente und kontinuierliche Materialhandhabung gewährleistet. Bearbeitungsmöglichkeiten Bohrarbeiten • Vertikalbohrung für Elektroinstallationskanäle, Dübel und Gewindestangen • Horizontalbohrung für Elektroverkabelung, Schalterdosen und Steckdosenaussparungen Eckverbindungsmodule • Schwalbenschwanz-Eckverbindung • Kreuz-Eckverbindung Sägemodule • Horizontale Sägevorrichtung zum Ablängen und Bearbeiten von Fenster- und Türöffnungen Kjdpexyf Evsfx Af Ijll • Vertikale Kappsägeeinheit zum Zuschnitt und Ablängen von Bauteilen Fräsarbeiten • Elektrokanalfräsen (Kabelnuten) • Längsträgerfräsen für Fensteröffnungen Weitere Bearbeitungsfunktionen sind in der beigefügten Grafik und Fotodokumentation dargestellt.

Sąlyga: naudotas, Gamybos metai: 2015, Eine sehr hochwertige, in Deutschland entwickelte und gefertigte Tischfräse vom renommierten Hersteller Martin. Trotz ihrer kompakten Bauweise verfügt die Maschine serienmäßig über zahlreiche Premiumausstattungen, darunter ein schwerer Verbundrahmen für maximale Stabilität sowie eine 5,7" große TFT-Farbtouchscreen-Steuerung. Diese ist ergonomisch auf Augenhöhe angebracht und trägt dazu bei, die Rüstzeiten erheblich zu verkürzen. Über das Steuerpult kann der Bediener bequem die gewünschte Spindelhöhe einstellen. Darüber hinaus ermöglicht der Werkzeugdatenspeicher das Ablegen von bis zu 500 verschiedenen Werkzeugen, wobei für jedes Werkzeug automatisch die Spindelhöhe, Drehzahl und weitere Programmdaten abgerufen werden können. Weitere Standardmerkmale sind ein Präzisionsanschlag mit Feineinstellung über Handrad und digitaler Anzeige in der Steuerung, eine elektronische Softbremse für den Spindelmotor sowie das 'Dornfix'-Schnellwechsel-System für die Spindel. Technische Daten: - Schweres Maschinenuntergestell für maximale Stabilität und präzise Bearbeitung - Präzisionsgeschliffener Graugusstisch - Benutzerfreundliche, über Kopf montierte grafische Farbtouchscreen-Steuerung - Hochwertige Parallelanschlageinrichtung mit Feinstverstellung über Handrad - 1 Stück 1 1/4"-Spindelwelle (Arbeitslänge: 140 mm) – SK40 'Dornfix'-Schnellwechselsystem - 7,5 kW Motor – Spindeldrehzahlen 3.000, 4.500, 6.000, 8.000 und 10.000 U/min - Zentrale Schmierstelle Inklusive folgender Optionen: - Tischverbreiterungen beidseitig, Gesamtlänge 2.200 mm, mit ausziehbarer Werkstückauflage (Gesamtlänge 3.000 mm) - Integrierte Anschlagbacken - Digitale Anzeige der Anschlagbackenposition direkt am Steuerbildschirm, Verstellung über Handrad (anstelle herkömmlicher Skala) - Grauguss-Konsole zur Vorschubunterstützung - Komfort-Vorschubarm mit schneller Höhenverstellung per Handrad und mechanischer Höhenanzeige; robuste Graugusskonsolen und große Stahlklemmhebel sichern den Vorschub in der gewünschten Position - Variomatic 3-Rollen-Vorschubapparat mit mechanisch stufenlos regelbarer Vorschubgeschwindigkeit von 3 bis 17 m/min; Ein/Aus-Schalter für den Vorschub im Steuerpult integriert Ksdpfxoxx Upnj Af Ioll - Centrex-Schutzhaube anstelle der Standard CPS-Schutzvorrichtung

Sąlyga: naudotas, Gamybos metai: 2021, Blokų matmenys: Ilgis: nuo 114 mm [4,5 in] iki 914 mm [36 in] Plotis: nuo 38 mm [1 1/2 in] iki 203 mm [8 in] Storis: nuo 16 mm [5/8 in] iki 63 mm [2 1/2 in] Kledpoxxw U Hofx Af Isl Gamyba Įvestis: iki 200 ruošinių per minutę Išvestis: iki 15 presavimo ciklų per minutę

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Log House Milling Machine BL100A, fully overhauled with factory warranty For log thickness up to 140mm, construction height up to 200mm, and processing length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Log house milling machine BL100A – four-spindle milling unit with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-sections approx. 140x220mm Kedpfsxxhwlex Af Isll • HM reversible insert tools included for wall thickness approx. 40–100mm • End groove milling unit 3.0kW with cutter B = 21–40mm • Drilling device with drill guide and drill bit D = 20mm • Integrated under-table cross-cut saw 4.0kW, saw blade D = 500mm • Pneumatic workpiece clamping with horizontal clamping jaws • Outfeed table 9m with push-off device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO Control Software • Label printer for component identification, laser printer for printing production lists • Excellent condition, factory-refurbished & general serviced, with parts warranty, in ready-to-operate condition • Price & delivery time upon request. Subject to prior sale and all rights reserved

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 12762, pjovimo aukštis (maks.): 300 mm, Fully automatic wood infeed Infeed roller conveyor Infeed and feed cross conveyor Under-table mitre saw 11 kW 5-axis universal milling unit - UF5 Combination support for vertically operating tools Drilling unit 2.2 kW - vertical drilling direction Ksdpfx Afoxxa Dwo Ijll Combination support for horizontally operating tools Reinforced drilling unit (3.0 kW) horizontal drilling direction Slotting unit 7.5 kW Marking unit at the rear (stop side) Fully automatic beam turning station, hydraulic Transport and positioning device "two-hand system" Electronic control with Hundegger production software Roller conveyor for wood outfeed with ejector 5-arm wood stacking rack Safety devices and guards Refined machine surface Extension for infeed cross conveyor Infeed roller conveyor for wood length 13 m 5-axis universal milling unit - UF5 Turret milling unit, vertical from above Remote maintenance possible Control cabinet special installation Control unit for disposal with operating buttons Extension roller conveyor 7.10 m without drive Height-adjustable safety baffle

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Parduodama CORALI linija plonų sienelių dėžių dugnams gaminti Siūloma pilna CORALI linija, kurią sudaro: - Žievinimo mašina - Faneros gamybos mašina Kledsxv St Sopfx Af Iel - Transporteris automatizuotam plonų sienelių dėžių dugnų surinkimui Techninės charakteristikos: Žievinimo aparato našumas: 🔹 3–6 m³ rąstų, kurių ilgis 850 mm 🔹 26–30 m³ rąstų, kurių ilgis 550–650 mm (per pamainą — 8 val.) Linijos našumas: 🔹 6 300–10 500 dugnų (faneros storis 4 mm) 🔹 8 100–15 500 dugnų (faneros storis 1,4 mm)

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, Construction project SRB - Vranje gamina visą granuliavimo įrangą, kurios našumas nuo 500 kg/1 val. iki 6 t/1 val. Gaminame šią įrangą: - Katilai - Džiovyklos - Silo - Maišytuvas su kondicionieriumi - Malūnas - Granulių aušintuvas - Presai - Transportavimo juostos - Maišytuvai - Dulkių šalinimo sistemos Klsdpexqd T Hjfx Af Iol - Smulkintuvai Visai mūsų įrangai taikoma 1 metų garantija ir teikiama 24 val. techninė pagalba. Teikiame šias paslaugas: - Įrangos montavimas - Diagnostika - Servisas - Linijų priežiūra - Darbuotojų mokymai - Paleidimas Užklausas ir užsakymus galite siųsti el. paštu arba telefonu darbo dienomis nuo 9 iki 17 val.

Sąlyga: labai geros būklės (naudotas), NAUDOTAS ĮRENGINYS - V380/50 - "CE" Kodas: CAL-052 _ _ _ Darbo plotis: 1100 mm Kjdpfx Aexp Ecysf Ioll 1-a grupė: plieninis volelis 2-a grupė: gumos volelis 3-ia kombinuota grupė: volelis/padas Variklių galia: 2 x 15 kW

Sąlyga: naudotas, Siurbimo filtras su 60 rankovių ir 5 maišais, komplektuojamas su 9 kW siurbliu ir valdymo skydeliu, naudotas. Surinkto aukštis: 3,65 metro Kljdjxlb Sijpfx Af Ijl

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, Hundegger Speed Cut SC1 CNC 2005 metų, geros techninės būklės, ieško naujo savininko. Puikiai tinka gaminti vinių plokščių stogams. Vaizdo įrašai rodo įrenginį veikime. Kjdpfexftalox Af Iell

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Automatinė hidraulinė GANG-NAILS presas gegnių jungtims Hidraulinis presas jungčių presavimui bei gegnių ir kitų elementų gamybai Kodjxdiucopfx Af Ijll Įrenginio matmenys: 5,0 x 1,30 m – Volelinis stalas kairėje: 12,95 x 3,9 m – Plokščias stalas dešinėje: 12,00 x 3,90 m – Spaudimo zona: 400 x 130 x aukštis 20 cm – Bendras ilgis: 26,30 m x gylis 3,90 m (stalai) ir 5,0 m (presas) Daugybė GANG-NAILS jungčių dėžių komplekte. Dešinysis stalas skirtas gegnių surinkimui bei GN plokščių paskirstymui. Tada vyksta elementų eiga ir laipsniškas spaudimas per presą. Elemento paėmimas kairiajame volelių stale. Detalės nuėmimas. Gera techninė būklė.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 90450080, padavimo ilgis Z ašis: 1 550 mm, ruošinio svoris (maks.): 12 500 kg, pjovimo aukštis (maks.): 400 mm, Y ašies padavimo greitis: 2 700 m/min, bendras ilgis: 27 500 mm, bendras aukštis: 4 500 mm, pjovimo plotis (maks.): 800 mm, pjūklo disko skersmuo: 520 mm, bendras svoris: 12 500 kg, galia: 40 kW (54,38 AG), darbinis ilgis: 12 000 mm, darbinis plotis: 800 mm, įvesties srovės tipas: trifazis, 5-axis CNC timber processing center ESSETRE Techno One 1TG–5A 5-axis timber frame machining center (X Y Z B C) with fixed gantry Suitable for processing all types of roof elements: straight and angled dovetail joints, tenon and mortise, hip and valley rafters, drilling with helical bits and milling tools, all types of cuts, grooves, and rebates. Automated beam feeding. Equipped with three tool magazines offering 9, 2, and 5 tool positions each. Control panel with Essetre Travi graphical software. Available tools: saw blade, helical cutter, tenoning cutter, roughing and straight cutters, dovetail cutters, 45° cutters, and chain notching aggregate. Machining dimensions: max length 12,000 mm; max section 800×400 mm. Overall dimensions: length 27.5 m x width 390 cm x height 450 cm. Total machine weight: 12,000 kg. Total installed power: 40 kW, 400 Volts, 60A. Air consumption: 400 Nl/min, 6 bars compressed air. Complete with a set of cutters, drill bits, and various accessories. In good technical and visual condition. Kodpfx Afsxdik Rs Isll Ref. M26 / y12–pp410k

Sąlyga: geras (naudotas), Gamybos metai: 1994, Namelių pjovimo mašina su 10 metrų Tiger stop stūmikliu, įrengta: 1 viršutiniu horizontaliu frezavimo bloku, 1 apatiniu horizontaliu frezavimo bloku, 1 priekiniu/galiniu frezavimo bloku, 1 horizontaliu gręžimo bloku, 16 mm skersmens, 1 automatine 10 m Tiger stop atstumo riba, metai: 2001, naudingo darbo ilgis: 9,20 m. Kljdpfx Afsxbn N To Isl

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, A complete production line for processing round timber, based on frame saw technology. The line is capable of processing logs from a minimum small-end diameter of 15 cm to a maximum butt diameter of 55 cm, with lengths ranging from 2.5 to 9.5 meters. The technology consists of: 1) A log handling cascade up to 10 meters in length with dosing system 2) Frame saw G710 by Královopolské strojírny - The frame saw is equipped with a dosing carriage mounted on rails, featuring hydraulic centering of the piece - Separating wedges at the saw’s exit separate center and side timber - The saw is powered by a 55 kW electric motor - Detailed description in a separate file - Roller conveyors extend from the frame saw - Center timber is returned via conveyors and directed to the second frame saw - Side timber is continuously transported to the cascade, which conveys it to the edging center 3) Frame saw G560 by Královopolské strojírny - The frame saw is equipped with a dosing carriage on rails, including hydraulic centering - Separating wedges at the saw’s exit separate center and side timber Kljdpfx Afexa Ette Isl - The saw is powered by a 45 kW electric motor - Detailed description in a separate file - Side timber is directed via a roller conveyor to the edging center cascade - Center timber is collected immediately after sawing, loaded onto a rail-mounted carriage, and after the batch is complete, extracted from the sawmill using a winch 4) Edging center by Strojírny Loučná n. Desnou - Max cutting height 26 mm, cutting width 70 to 370 mm, total installed power 29.2 kW - Detailed description in a separate file - Side timber is fed vertically by the cascade into the edging center - If required, the timber is first cut to the desired production length. The length can be set as fixed or optimized for yield maximization - After trimming, the timber is edged to fixed widths to achieve maximum timber yield. After edging, the timber is automatically conveyed to storage boxes according to the trimmed lengths. The final product is unsorted side timber by width, usually 80 mm and above.

Sąlyga: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 350 mm, darbinis ilgis: 3 200 mm, darbinis plotis: 3 200 mm, pjūklo disko greitis: 4 600 aps./min, pjūklo pavara: 7 500 W, darbinio aukščio: 60 mm, Įranga: dokumentacija / vadovas, Homag Optimat CH04/32/32 pjovimo staklės – pilnai sukomplektuotos Kjdpfxjw S Tqlj Af Iell Iki šiol vis dar naudojamos, 1–2 dienas per savaitę, tačiau parduodamos dėl veiklos nutraukimo Slovakijoje. Visada gerai prižiūrėtos. ✅ Galingas našumas Pjūklo variklis (7,5 kW) – priešpjūklis (1,1 kW) Pagrindinio pjūklo apsisukimai – 4600 aps./min., priešpjūklo – 5100 aps./min. ✅ Patogus naudojimas Pūtimo agregatas lengvam pjaunamų plokščių padėjimui Paruošta naudojimui, pilnai sukomplektuota 📍 Staklės yra Slovakijoje, patiems reikia išardyti ir išsivežti vietoje.

Sąlyga: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MJY 142S-35, MJF 143-1535, Production Line MJY-MJF from the Chinese manufacturer China SHENGONG. The equipment was commissioned in 11/2022 and is designed for processing logs with a maximum diameter of 340 mm and length of 5 m. The technology consists of: Klsdsw Rg Emspfx Af Iel - Log infeed deck (cascade) for logs up to 5 m, with dosing and centering - Infeed conveyor to the machine - Double-shaft profiling saw MJY 142S-35 - Outfeed pressure rollers - Outfeed sorting conveyor for cant and side boards - Side board conveyor - Cant conveyor with side transfer and flipping - Cant conveyor to multi-rip saw - Centering before multi-rip saw - Double-shaft multi-rip saw MJF 143-1535 - Lumber conveyor after the saw - Side chains + lumber conveyor - Edging saw MJ 141-0440 + 5x laser for saw blade positioning - Roller conveyor before and after the edging saw - Belt conveyor under the Multipris for offcut removal - Connecting belt conveyor - Belt conveyor under the multi-rip saw for offcut removal to chipping - Belt conveyor for removal from the hall - Chutes and conveyor interconnections - Accessories: hydraulics + electrics + control system The price of the technology is quoted ex works (FCA Nepomuk), without dismantling.