Tischlerei Kluckner

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2024, bendras plotis: 3 600 mm, bendras aukštis: 2 500 mm, darbinis plotis: 1 300 mm, šlifavimo plotis: 1 300 mm, Platus juostinis šlifuoklis ir kalibravimo staklės Techniniai duomenys: Darbinis plotis: 1300 mm Ruoinio aukštis maks.: 150 - 4,0 mm Šlifavimo juostos matmenys: apytikriai mm Staklių matmenys (ilgis x plotis x aukštis): 4,8 x 2,7 x 2,35 m Variklio galia: 219 kW Metai: 1992/2004 Skirta medžio apdirbimui! Kiti ypatumai: - Pneumatinis juostos vedimas - Aukščio reguliavimas rankiniu ratuku Blsdpfx Asxllbbjdmer - Avarinio stabdymo jungiklis - Šlifavimo volų reguliavimas - Juostos įtempiklis - Ritininių takelių (pajungimas ir nuvedimas po 2800 x 1700 mm, kiekviename po 6 ritinius) varomasis - Valdymas per valdymo skydelį - Ruoinio storis min./maks.: 4,0/150 mm - Šlifavimo juostos plotis: 1300 mm (juostos ratas) - Šlifavimo juostos atramos ilgis x plotis: 1700/1350 mm Staklės atnaujintos ir patikrintos! Komplekte su visiškai ritininiu taku...

Sąlyga: naudotas, Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, Sander with a working width of 1300 mm. In good condition. Bsdpewptrrjfx Admelr

Sąlyga: geras (naudotas), Codice: 0424 Marca: DMC - ITALIA Modello: EUROPA 120 Calibratrice levigatrice automatica a 2 nastri per legno, mobili, arredamento, telai in legno, porte, pannelli, materiali compositi e vari. Dati tecnici: Struttura robusta Larghezza massima di lavoro mm 1200 Altezza massima di lavoro mm 170 Dimensioni nastro abrasivo mm 2200 x 1250 1° Gruppo: Rullo di calibrazione in gomma - Diametro mm 220 - Staffe pressapezzo regolabili - Motore Hp 20 2° Gruppo: Tampone di finitura con pressione regolabile - Motore Hp 10 Soffiatori per la pulizia del nastro abrasivo Variatore di velocità avanzamento nastro da 3,5 a 17,5 mt/min Tavola a vuoto - Motore Hp 7,5 Sollevamento tavola automatico Posizionamento tavola automatico N° 2 bocche di aspirazione diametro mm 200 Pressione di lavoro 7 bar Dimensioni di ingombro mm 1900 x 1800 x 2100 h Peso kg 2500 Blsdpfx Adjv A Ta Djmjr

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (LxWxH) 4630 x 3005 x 2334 mm Weight 12,160 kg Total power requirement 135.6 kW Sanding line SANDOMAT SFR-R-P1300+SUR-R1300 - Working width: 1300 mm - Min. workpiece length: 465 mm - Min./max. pass-through height: 3–100 mm - Total power: 71.8 kW - Stepless feed speed: 4–28 m/min - Motor power first sanding unit: 30 kW - Motor power second sanding unit: 22 kW - Motor power third sanding unit: 15 kW - Feed motor: 3.7 kW - Motor for height adjustment: 0.55 kW - Motor for cleaning brush: 0.55 kW - Hardness of first sanding roller: 80 sh - Hardness of second sanding roller: 50 sh - Hardness of third sanding roller: Sanding shoe - Diameter of first sanding roller: 255 mm - Diameter of second sanding roller: 255 mm - Diameter of third sanding roller: Sanding shoe - First sanding belt speed: 21 m/s - Second sanding belt speed: 14.5 m/s - Third sanding belt speed: 11 m/s - Sanding belt dimensions: 1320 × 2000 mm - Compressed air connection: 6 bar - Air consumption: 17 m³/h - Extraction capacity: 9200 m³/h - Voltage: 400 V / 50 Hz - Dimensions (LxWxH): 2100 x 3005 x 2334 mm - Weight: 6390 kg SANDOMAT SUR-R1300 Technical data: - Working width: 1300 mm - Min. workpiece length: 390 mm - Min./max. pass-through height: 10–100 mm - Total power: 63.8 kW - Stepless feed speed: 5–32 m/min - Motor power first sanding unit: 37 kW - Motor power second sanding unit: 22 kW - Feed motor: 3.7 kW - Motor for height adjustment: 0.55 kW - Motor for cleaning brush: 0.55 kW - Hardness of first sanding roller: 80 sh - Hardness of second sanding roller: 70 sh - Diameter of first sanding roller: 255 mm - Diameter of second sanding roller: 255 mm - First sanding belt speed: 21 m/s - Second sanding belt speed: 18 m/s - Sanding belt dimensions: 1320 × 2400 mm - Compressed air connection: 6 bar - Air consumption: 17 m³/h - Extraction capacity: 9500 m³/h - Voltage: 400 V / 50 Hz - Dimensions (LxWxH): 2530 x 2170 x 2290 mm - Weight: 5770 kg Blodpfxev A Hfts Admjr

Sąlyga: naujas, - NEW - GENERAL FEATURES: Machine frame and work table * Steel structure with electric control cabinet at the front of the machine * Introduction of sanding belts from the left side of the machine * Motorized table height adjustment * Main motor integrated into the machine frame Electrical equipment * Electromechanical control panel on the left front side of the machine * Automatic star-delta starter for the main motor * Motor protection switches for the motors * Motors with protection class IP 54 Emergency and safety devices Bledpfx Aovwfrnsdmer * Safety microswitch for thickness overrun * Automatic brake for immediate stopping of the aggregates * Emergency stop bar at the workpiece infeed * Mushroom switch at the workpiece infeed and outfeed * Lockable main switch * Automatic emergency machine shutdown in cases of: - sanding belt breakage - sanding belt not tensioned - protection against lateral wandering of sanding belt - lack of compressed air - main motor overload Note: The standard version with 400 Volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400 Volt power supply is without a neutral conductor, a single-phase transformer from the price list must be ordered as well. The same transformer must also be ordered with a machine having a voltage higher than 400 Volts, regardless of whether a neutral conductor is present or not. Machines with 220 or 230 Volts (50 or 60 Hz) are available at an extra cost (see price list). BASE MACHINE STANDARD EQUIPMENT - R140/85 rubber-coated calibrating roller, diameter 140 mm 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm 45 Sh - 2nd position - Hard sanding pad with manual working height adjustment - Main motor 11 kW (15 HP) - Electronic ammeter for main motor to indicate current consumption - Electronic display of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at the infeed before the first aggregate - Rubber feed belt 60 Sh - Roller table with two rollers at infeed and outfeed of worktable - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering Working width mm: 1,100 Min./max. working height mm: 4 – 170 Sanding belt width mm: 1,115 Sanding belt length mm: 2,150 Main motor power kW (HP): 11 (15) Gear motor kW (HP): 0.45/0.8 (0.6/1.1) Feed speed m/min: 4.5/9 Comprises: 10.90.87 European safety regulations (mark C.E.) 93.07.31 Volt 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table at infeed and outfeed for long workpieces 62.44.50 10" operating panel with "eye-S" software integration 31.21.60 "RA" helical-grooved steel contact roller - 1st aggregate 97.50.71 Main motor 15 kW (20 HP)

Sąlyga: naudotas, Gamybos metai: 2000, Working width: .- mm Bedpfx Asvwfl Uedmolr Equipped with 1 sanding unit consisting of: - Combination unit with electronic pad for lacquer sanding - Lacquer sanding - Dust brush - Roller table at infeed, 270 mm - Electronic program control for 50 programs Machine overhauled with brand-new feed belt Valves and filter pressure regulators replaced Machine fully adjusted Test sanding performed Used Make: Bütfering Model: Classic 111 C Year of manufacture: 2000 Machine no.: 63608 Working width: 1,100 mm Pass-through height: 160 mm CE type-tested GS wood dust tested Belt dimensions: 1,120 mm x 1,900 mm Feed speed: 4 + 8 m/min 1 combination unit, 3.7/7.5+15 kW, 3 belt speeds with automatic adjustment via control panel Steel roller Diameter: 130 mm Belt speeds: approx. 4.5 + 9 + 18 m/s Electronic segmented shoe Segment pitch: 50 mm for lacquer sanding, workpiece controlled Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.