BELES d.o.o.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, galia: 50 kW (67,98 AG), įėjimo įtampa: 400 V, vidinis ilgis: 9 300 mm, vidinis plotis: 220 mm, vidinis aukštis: 220 mm, bendras svoris: 11 000 kg, valdymo tipas: NC valdymas, kuro tipas: elektrinis, Įranga: CE žymėjimas, dokumentacija / vadovas, SAGA aukšto dažnio vakuuminė džiovyklė Itedpfx Aasy Dr N Sjujf

Būklė: naudotas, WSAB Lignomat džiovinimo kamerų kompleksas Gamintojas: WSAB Lignomat GmbH Itsdpfoy Akgmjx Aauef Modelis: ODEN AF Kiekis: 3 kameros Kameros matmenys (vienos kameros): Ilgis: 8 200 mm Plotis: 13 000 mm Aukštis: 5 800 mm Durų dydis: 13 000 x 4 200 mm Talpa, priklausomai nuo medžiagos storio: 85 m³ (esant 25 mm) 121 m³ (esant 60 mm) 141 m³ (esant 120 mm) Džiovinimo sistema: Valdymo sistema: RIGI DR 4 Temperatūros jutikliai Drėgmės valdymo sistema (WMC) Automatinis klimato reguliavimas Ventiliacija: 7–10 ventiliatorių (priklausomai nuo komplektacijos) Galingumas: 7,5 kW kiekvienam ventiliatoriui Oro srautas: iki 400 000 m³/val. Reversinis oro srautas Šildymas: Šildymo galia: iki 850 kW Maks. temperatūra: 75°C Šilumos nešėjas: karštas vanduo (95/80°C) Papildomos sistemos: Drėkinimo sistema (20 bar, 80°C) Oro įtraukimo/ištraukimo sklendės Automatinis drėgmės reguliavimas Darbo parametrai: Medienos rūšis: eglė Pradinė drėgmė: iki 90% Galutinė drėgmė: apie 13–17% Produktyvumas: Iki 9 600 m³/metus (esant 25 mm) Iki 6 900 m³/metus (esant 60 mm)

Būklė: naudotas, Gamybos metai: 1995, mašinos/transporto priemonės numeris: 15809, Funkcionalumas: neveikiantis, Vacuum Dryer / Drying Chamber DWT / IWT MD 2600 x 15000 Used Compact System The machine is still connected to power and heating but has not been used for the past six months. *PLC control replaced in 2014* *Vacuum pump defective* Dryer diameter: 2600 mm Dryer length: 15000 mm Package length: 15000 mm Package width: 1200 mm Package height: 2100 mm Gross capacity: 38 m³ Ijdpfx Aasy Aawnsuetf Net capacity: 25 m³ of sawn timber or 18 m³ of solid wood Electrical connection: 50 kW Electrical consumption: 18 kWh Water drain: 50 mm Water connection: 25 mm Heat connection: 87 kW, 85 °C hot water at the dryer Heat consumption: 500 kcal per liter of moisture or 0.6 kW per liter of moisture Including heating boiler, oil-fired (out of operation for approx. 15-20 years) Hydraulic, fully automatic vessel closure Vessel material: solid stainless steel to DIN, x5 Cr Ni 189 150 mm insulation, clad with 1 mm galvanized steel sheet 1 rail bridge in front of the vessel 5 wagons for loading and unloading, each approx. 3000 mm long 15 fans with Siemens motors Heating register made of stainless steel finned tubes with aluminum fins, length approx. 180 m, surface area 280 m², diameter 25 mm Feed and return pipe diameter: 80 mm Heating medium: 85 °C hot water at the consumer Circulation pump capacity: 75 m³/h 3 fans for vapour condensation Rails in front of the dryer: 16000 x 600 mm The entire system is on a foundation and can be lifted and loaded in one piece by crane. Transport dimensions approx. 21000 mm long, 3050 mm high (without cooling system) Sale from location 52146 Würselen, without dismantling, without transport and assembly. Dismantling, loading, and transport by us available as an option. Specification and price subject to change. To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11165/1, darbinis plotis: 1 300 mm, ruošinio aukštis (maks.): 40 mm, Nėra pradinės kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! TECHNINIAI DUOMENYS Maks. darbinis plotis: 1 300 mm Maks. apdorojamas storis: 40 mm Itodpfx Aeyzpp Deaujf ĮRANGA Džiovinimo sistema su 3 UV lempomis Transportavimo sistema su motorizuotomis strypais Atskira valdymo spinta Išorinis nuorodos numeris: MGF025

Būklė: naudotas, Gamybos metai: 2005, vidinis ilgis: 14 000 mm, vidinis plotis: 1 250 mm, vidinis aukštis: 1 850 mm, bendras ilgis: 15 900 mm, bendras plotis: 2 500 mm, bendras aukštis: 3 000 mm, bendras svoris: 12 000 kg, Įranga: CE žymėjimas, No. 3262 Vacuum Dryer / Drying Chamber Kronseder KCT 2400 Used, year of manufacture 2005 The unit was in operation until 2024 and remains connected to power and hot water until July 2026. Capacity approx. 32 m³ Heating via hot water Tank made of stainless steel Tank diameter approx. 2000 mm Tank external length approx. 15000 mm Tank internal length approx. 14000 mm Width of wood stack 1250 mm Height of wood stack 1850 mm Transport dimensions approx. 15900 x 2500 x 3000 mm (LxWxH) Weight approx. 12,000 kg Sale on behalf of customer, ex site near 34125 Kassel, without dismantling, transport or installation. Dismantling, loading, and transport can be optionally provided by us. Errors in description and price excepted. To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is. Technical data, condition description, year of construction, and scope of delivery as per manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; sold as seen. Images and videos are for illustration purposes only and do not represent the actual scope of delivery. Itsdoyy R D Tjpfx Aauof Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch. Delivery terms: Ex site.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Demonstracinis modelis. Būklė kaip naujos. Isdpfx Aeyyb Nyoauotf Parduodame džiovinimo kamerą, kurią maitina aukšto efektyvumo dujų degiklis, su netiesiogine sistema (nėra atviros liepsnos) šilumos mainams. Tinka visų rūšių medienai – minkštai, kietai, taip pat paletėms ar malkoms. Naudota tik retsykiais demonstracijoms ir džiovinimo ciklų testavimui, 100% veikianti.

Būklė: labai geros būklės (naudotas), Italų gamintojo OS PANTO medienos džiovykla 4 kameros – kiekviena: - plotis: 16,9 m - ilgis: 13,5 m - vartų aukštis: 5,9 m Itodpfeyw H H Ejx Aauof Vienos kameros talpa apie 270 m3 Pilnai su visa dokumentacija, automatika, Valdymo programinė įranga ALENT

Būklė: naudotas, mašinos/transporto priemonės numeris: 007926, Didž. apdirbamas plotis: 1300 mm Džiovinimo sistemos: Karštas oras su karštu oru: taip vertikalios krepšiai: taip krepšių skaičius: 48 Ijdpfoyhbklex Aaujtf vertikalios durys/kameros: taip vertikalių durų/kamerų skaičius: 2

Būklė: naudotas, Funkcionalumas: nepatikrintas, Juostinis džiovintuvas pas mane nebuvo eksploatuojamas, buvo įsigytas naudotas. Parduodamas kaip naudotas, be garantijos ir be pretenzijų. Dešinės valdymo spintos durelės yra pažeistos (išplėštos vyriai). Ijdpfx Aasyf Uhlsuotf

Gamybos metai: 2005, būklė: naudotas, Subscribed, DDG INSOLVENCY I.P.U.R.L., headquartered in Cluj-Napoca, str. Septimiu Albini, no. 115, Cluj county, VAT RO27987796, registration number 2A0522, represented by the insolvency practitioner Godorogea Daniel-Lucian as judicial liquidator of the company ELEMENTO MOBILI S.R.L. – in bankruptcy, headquartered in Dej, str. Dumbrava Roșie, no. 6, ground floor, apt. 1, Cluj county, registered with the Trade Register attached to the Cluj Tribunal under no. J12/2389/2016, unique registration code 36225390, appointed under Civil Decision no. 1278 dated 03.07.2025 pronounced by the Specialized Cluj Tribunal in file no. 442/1285/2025, is organizing a public auction with ascending price, for the individual sale of the asset identified below: Conventional timber dryer (air/steam ventilation) Baschild Italia, equipped with 6 chambers and a useful drying capacity of 300 cubic meters, manufactured in 2005 – price 36,900 Euro + VAT. The first auction will take place on 08.04.2026 at 15:00, at the headquarters of DDG Insolvency I.P.U.R.L. in Cluj-Napoca, str. Septimiu Albini, no. 115, Cluj county. In case of non-award, the auction will be repeated on 15.04.2026, 22.04.2026, 29.04.2026, 06.05.2026, and 13.05.2026, under the same conditions and at the same time. For viewing the asset, the judicial liquidator will arrange a viewing day on 06.04.2026 between 09:00–12:00. Those interested in viewing are invited to contact the judicial liquidator at phone number 0763 478 619 and express their intention to participate, before the set date. During the organization of public auction sessions, the judicial liquidator will organize further viewing days, which will be communicated to interested parties. In case of an award, the judicial liquidator will issue the fiscal invoice for the value of the awarded goods. The price will be converted into RON at the exchange rate established by the National Bank of Romania on the invoice date. Itsdpfx Aaeyfhhfousf The bidding increment is 5% of the starting price. The tender book for auction participation will be prepared by the judicial liquidator according to standard practices, will contain the auction participation rules, and will be made available by the insolvency practitioner at the price of 5,000 RON + VAT. It can be purchased from the liquidator’s office or by phone, following which it will be sent by e-mail to the participant. The auction participation guarantee will amount to 10% of the starting price. This, together with the registration documentation, must be submitted at least 24 hours before the auction date at the liquidator’s office. The auction guarantee will be deducted from the price of the asset for the successful bidder and refunded to those who are not declared winners. In case of identical bids, the asset will be awarded to the person who undertakes to pay the full price in the shortest possible time. The payment term for the price is 5 working days from the award date. If the remaining balance is not paid, the successful bidder will forfeit the deposit paid as guarantee and will no longer be eligible to participate in subsequent auctions.

Gamybos metai: 2026, būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 559, Džiovykla optimizuota storai arba kietai medienai Naudojamas ilgis: 5000 mm Naudojamas aukštis: 1100 mm Naudojamas plotis: 1100 mm Nauja elektros spinta ir jutikliai Itedpfx Aasya Ik Aousf Kontroliuojama džiovinimo funkcija Trūksta išorinio bėgio ir vežimėlio (gali būti tiekiama arba padedame pirkėjui pasigaminti) Džiovykla galima apžiūrėti 74 departamente

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2008, LAMINUOTOS MEDIENOS DELAMINACIJOS BANDYMO ĮRENGINYS Iodpex S E S Aefx Aaujtf

Būklė: naudotas, Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bendras svoris: 4 850 kg, bendras aukštis: 2 900 mm, bendras ilgis: 10 000 mm, bendras plotis: 2 300 mm, Used thermal modification chamber for wood. Constructed from high-quality materials, it ensures efficient thermal treatment. An ideal solution for professionals in wood processing. Itjdpfx Aajx E Slvjujf The chamber was purchased new in 2021 from SUKHOVIY LLC, model KTMD 9. Very little used, it was disconnected in 2023. The chamber was used for modifying spruce and pine wood, but it is also suitable for other wood species. Very easy operation and thermal modification process, requiring only electrical power supply and water connection. The chamber features a retractable loading trolley and a foldable frame which enables the trolley to roll out. Key parameters: - Total volume: 28.5 m³ - Load capacity: up to 10 m³ per cycle - Power: 48 kW - Maximum power consumption: 260 kW/m³ - Minimum power consumption: 150 kW/m³ - Maximum achievable internal temperature: 235°C - Dimensions (L x W x H): 10.0 x 2.3 x 2.9 m - Weight: 4,850 kg The chamber comes with operating instructions in Polish and an EC Machinery Declaration of Incorporation. The listed price is net, VAT not included.

Būklė: naudotas, WSA Lignomat vakuuminė džiovykla, Bollmann Tromatic 910GH valdymas, gylis apie 10 m. Iodpfxsxxpdts Aaustf

Būklė: naujas, Airplan — Kit modulari di essiccazione per legname e pallet Breve descrizione Airplan è il modo più semplice ed economico per essiccare il legno, in particolare il legname tenero. Si tratta di un kit pronto all’installazione, progettato per essere montato all’interno di una struttura realizzata dall’utente (secondo il nostro disegno fornito), fino a 25 metri cubi. Con Airplan si minimizza l’investimento e si ottiene al tempo stesso un’essiccazione precisa e professionale per tavole e pallet. Descrizione del prodotto Airplan è un kit completo che comprende tutto il necessario per trasformare un semplice ricovero in una camera di essiccazione professionale per legno. Forniamo il disegno strutturale, l’utente costruisce la struttura e installa il nostro kit: il sistema è subito pronto all’uso. Componenti principali - 3 ventilatori assiali industriali per una circolazione dell’aria controllata - Kit resistenze elettriche per un apporto di calore affidabile - 2 serrande automatiche per ottimizzare il ricambio e il controllo dell’umidità - Quadro elettrico di comando con software di gestione dell’essiccazione e tutte le connessioni necessarie - Tubazione di nebulizzazione acqua con ugelli Vantaggi principali - Minimo investimento iniziale: si acquistano solo gli elementi necessari, non un forno prefabbricato completo - Ridotti costi di trasporto grazie al formato compatto del kit - Installazione rapida, semplice e utilizzo intuitivo - Componenti professionali e materiali di alta qualità per una lunga durata operativa - Controllo preciso dell’essiccazione, idoneo sia per tavolame che per pallet Applicazioni Isdpfx Asxnbctoauetf - Segherie di piccole e medie dimensioni - Produttori di pallet - Essiccazione in loco quando un forno completo non è economicamente vantaggioso - Installazioni pilota in vista di ampliamenti futuri Cosa forniamo Kit Airplan completo (componenti elencati sopra) Disegno strutturale e linee guida d’installazione Supporto base all’avviamento e istruzioni di messa in funzione Prossimi passi / Contatti Per ricevere un preventivo, dati tecnici (potenza elettrica richiesta, assorbimenti), e il disegno strutturale, contattateci comunicando la capacità di essiccazione desiderata e le dimensioni previste della struttura. Adatteremo la configurazione alle vostre necessità e vi forniremo un’offerta dettagliata.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Vakuuminė džiovinimo kamera iš ISVE. ISVE valdymas 2024 m. atnaujintas, įranga patikrinta. Iedpfxjxgdrbs Aauetf

Būklė: labai geros būklės (naudotas), Parduodu medienos džiovyklas labai geros būklės. Iedsxf Nybjpfx Aaustf

Gamybos metai: 2018, veikimo valandos: 35 000 h, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Beschreibung eines vollautomatischen Trockners Hauptüberholung bis Mitte 2025 durchgeführt • Das Gehäuse des Trockners ist eine geschweißte Stahlkonstruktion. Der Innenboden besteht aus gelochtem Blech. Der Trockner verfügt über eine Außenverkleidung (Wände und Decke) aus Sandwichpaneelen. • Der Antrieb des Trockners erfolgt über ein hydraulisches Aggregat. • Der Trockner ist mit „Ziehl Abegg“ MAXvent Axialventilatoren ausgestattet. Die Propellerflügel bestehen aus leichtem Gussmaterial. Einer der energieeffizientesten Ventilatoren am Markt. • Der Heißlufterzeuger ist mit zwei „Geo Coil“-Wärmetauschern ausgestattet (voll funktionsfähig, jedoch mit verbogenen Lamellen). • Das Steuerungssystem ist mit einem Touch-Display zur Bedienung und Visualisierung des Trocknungsprozesses ausgestattet. Fernbedienung per PC möglich. Inkl. Webserver auf dem Bedienpanel zur Visualisierung der Trocknungsprozesse über Ethernet-Schnittstelle. • Betriebsmodus nach Luftaustrittstemperatur. Die Drehzahl der Ventilatoren wird über Frequenzumrichter automatisch so geregelt, dass das gewünschte Temperaturniveau gehalten wird. Inklusive Druckmessgeräte und Erweiterung des Steuersystems. • Betriebstemperatur des Wärmeträgers im Trockner ca. 85°C Vorlauf und ca. 65°C Rücklauf, Wärmeträger-Volumenstrom: 176 m³/h. • Trocknungsluftventilatoren mit Frequenzumrichtern ausgestattet. • Feuchtesensoren am Trocknerausgang: JA Iedpfx Asxc Eiteauetf • Höhenverstellung des Trocknungsbetts: JA • Vergrößerter Brennstoff-Aufnahmebehälter: JA Allgemeine Daten • Aufgabematerial: Holzhackschnitzel • Materialgröße: G100 • Wassergehalt Aufgabematerial max. 45% • Wassergehalt Auslaufmaterial 7–10% • Ausgelegt auf ca. 1.600 kg/h Auslaufleistung • Dichte (nass): 300 kg/m³ • Ausgelegte Trocknungsfläche: ca. 97 m² • Ausgelegte Klimabedingungen vor Ort: Umgebungstemperatur 0°C; relative Luftfeuchte 70%, Luftdruck 990 mbar • Schalldruckpegel: 75 dB (1 m Entfernung zum Lufteinlass) Ventilatoren Trockner, installierte Leistung: 74 kW Hydraulikaggregat Trockner: 15 kW

Būklė: naujas, XPLAN yra beveik 50 metų INCOPLAN patirties rezultatas, užtikrinantis ypač efektyvų ir energiją taupantį medienos džiovinimo būdą visame pasaulyje, bet kokiomis klimato sąlygomis. Palyginti su tradicine oro apykaitos sistema, kondensacinis džiovinimas su XPLAN reikalauja maždaug trečdalio elektros energijos. Tai švelnus džiovinimo metodas, ypač tinkamas lapuočių ir spygliuočių medienai, išsaugant jų savybes, tačiau retkarčiais gali būti naudojamas ir padėklų bei malkų džiovinimui. XPLAN PRO yra patobulinta versija, skirta iki 20 m³ medienos džiovinimui. Šios sistemos tinka tiek entuziastingiems mėgėjams, tiek profesionaliems dailidėms, užtikrinant geriausią kainos ir kokybės santykį medienos džiovinimui. Iedpfxjw Ug Ate Aaustf Pastatykite arba įsigykite savo patalpą, pastatykite ir prijunkite XPLAN arba XPLAN PRO ir pradėkite džiovinimo procesą. Pateikiame visą idealios kameros projekto sprendimą.

Gamybos metai: 2024, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Nr.50086, Naujas įrenginys parduodamas dėl aplinkybių: 6 prijungimo vietos su vėdinimo kanalu. Tik atsiėmimas! Kaina iš stoties 31637 Rodewald. Ijdpfx Aasw Uf S Houstf

Gamybos metai: 2023, būklė: labai geros būklės (naudotas), Talpa: 850 m³/min. Įrenginio matmenys (I x P x A): 350 x 493 x 450 mm. Svoris: 20 kg. Elektros galingumas: 0,19 kW. Tūrio srautas: 850 m³/min. Matmenys (A x P x G): 350 x 493 x 450 mm. - Slėgio kritimas: 0,25 bar. - Oro išėjimas: 3/4"a. - Galia: 0,19 kW. Šaltnešis: R513A. Įtampa: 230 V. Itodpfxjw I Hpae Aaujf

Būklė: naujas, Capacità: da 3 a 20 m³ — il sistema ideale “tascabile” per piccoli e medi produttori Isdpew Hf Adjfx Aaujtf Descrizione del prodotto: Il Mobileplan è un forno di essiccazione di alta qualità, completamente mobile, progettato per la massima versatilità. Ideato per un impiego rapido e una gestione semplificata, accoglie qualsiasi specie legnosa e rende semplice sia l’essiccazione del legno sia il trattamento ISPM‑15 per pallet, senza i vincoli di una struttura fissa. Installazione plug-and-play: nessun ancoraggio permanente—il forno è facilmente movimentabile con carrello elevatore o gru. Installazione ultra-rapida: fornito preassemblato e collaudato in fabbrica; operativo in meno di una giornata. Processo completamente automatico: gestisce cicli di essiccazione autonomamente; massima comodità con impostazione e avvio automatico. Opzioni di riscaldamento: - Elettrica - Acqua calda / vapore - Gas Vantaggi principali: - Design compatto e trasportabile per operatività realmente mobile - Installazione in meno di 24 ore—riduce tempi e costi di avviamento - Struttura preassemblata per diminuire le spese di trasporto e montaggio - Ideale per essiccazione di conifere e latifoglie e trattamento pallet conforme ISPM‑15 - Costi aggiuntivi ridotti grazie al sistema modulare plug-and-play - Affidabilità industriale nonostante il formato compatto Mobileplan è la soluzione ideale per operatori che cercano un sistema di essiccazione premium con mobilità, rapidità di installazione e bassi costi ausiliari—perfetto per falegnamerie, piccole segherie o attività in campo.

Būklė: naujas, Volumi: disponibili versioni da 10 m³ o 20 m³ Descrizione prodotto: Easyplan è un sistema di essiccazione compatto ma potente, progettato per l’essiccazione di legno tenero e duro, oltre che per il trattamento di pallet e imballaggi in legno conforme alla normativa ISPM‑15. Garantisce la piena conformità fitosanitaria e offre risultati di essiccazione costanti e di alta qualità per un’ampia gamma di specie legnose. L’installazione richiede meno di una giornata, rendendolo ideale per una rapida messa in servizio presso siti produttivi di piccole e medie dimensioni. Il processo è completamente automatico: basta caricare la cella e il sistema gestisce automaticamente l’intero ciclo di essiccazione o trattamento termico. Opzioni di riscaldamento disponibili: - Elettrico - Gas - Acqua calda / vapore Vantaggi principali: Itodpfxsw Hfzae Aauof - Capacità di 10 m³ o 20 m³ per soddisfare diverse esigenze produttive - Adatto a legname tenero e duro - Trattamento pallet e imballaggi in legno conforme ISPM‑15 - Processo di essiccazione completamente automatico - Installazione rapida in meno di 24 ore - Opzioni di riscaldamento flessibili per adattarsi alle fonti energetiche disponibili Easyplan è la soluzione ideale per aziende che cercano un sistema compatto e veloce da installare per l’essiccazione del legno e il trattamento pallet ISPM‑15, senza compromessi in termini di prestazioni o qualità.

Būklė: labai geros būklės (naudotas), CTS 3G C 400* – Hot Water Boiler for Superheated Water, Manually Fed with Wood Waste Thermal capacity: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Fitted with control thermostat, safety thermostat, and thermometer. Isdpfow Ev Twjx Aaustf Fuel type: wood waste. Exhaust system: cyclone separator, forced draft fan, connection ductwork. Steaming Chamber Net Capacity: 100 m³/batch. Type DVK-I 100 m³ – 1 pc, dimensions: 8.5 x 9 m, height 4.3 m. Control unit: Baschild Italy. Sliding door. Oxyvent overpressure system. Stainless steel tanks and radiators on three sides. Includes turnkey connections between boiler and steamer, and complete boiler room equipped with distributor, manifold, pumps, expansion tank, etc.

Būklė: naudotas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Due to a change in our drying system, we are selling our walking floor dryer. Drying container, dryer Like-new condition due to minimal use 40" Container Drying container TC40ft WISSMATEC Used and new parts - 40ft shipping container - Drying floor with slotted bridge plates - Hydraulic walking floor with cylinder and external quick-connect coupling - Discharge with trough screw conveyor, 0.75 kW - Rotary airlock, 0.75 kW External dimensions: Length ≈ 12,200 mm Width ≈ 2,440 mm Height ≈ 2,655 mm Weight ≈ 6,500 kg Year of manufacture: 11/2023 Ijdpfx Aajwzycbeuetf