Rainer Dulat

Būklė: labai geros būklės (naudotas), Brüel & Kjaer LDS Dactron Laser USB LAS 200 Type: LAS 200 LDS Dactron vibration testing and shaker control system incl. Acer laptop with installed software For sale is a used LDS Dactron LASER USB shaker control system, type LAS 200. The system was last used in an industrial vibration testing setup and is suitable for electrodynamic shaker systems, vibration testing, resonance tests, random tests, as well as shock tests. Manufacturer / Model Manufacturer: LDS Dactron / Brüel & Kjær Type: LASER USB Model: LAS 200 Made in U.S.A. Software / Functions Kljdjy T Iv Hspfx Amket Installed software: Shaker Control Version 8.1001 Library Version 6.3120 Activated modules as per software display: Random Sine on Random Random on Random Swept Sine Resonance Search, Track and Dwell Sine Oscillator Classical Shock Shock Response Spectrum Long Time History Other enabled options: Automatic Drive Notching / Limiting Real Time Data Exchange High Frequency Control Amplifier Controller Technical Data 8 active input channels 2 output channels Sampling rate: 96 kHz A/D resolution: 24 bit USB mode: 2.0 Input type: Volt / ICP / TEDS Suitable for electrodynamic vibration test systems and industrial shaker installations. Calibration Calibration data as displayed by system: Last calibration: 20.09.2023 Due date: 19.09.2024 Dimensions / Weight Controller approx.: 430 x 350 x 90 mm (W x D x H) Controller weight: approx. 6–8 kg Scope of delivery LDS Dactron LASER USB Controller Acer laptop with installed software Connection cables / accessories as seen in the pictures Condition Used device from industrial application. Visual condition as shown in photos. Normal signs of use and storage present. System powers on, software starts, and the hardware is recognized. No further testing has been performed. Additional Notes Sale exclusively to business customers. No guarantee or warranty. Subject to prior sale, errors, and changes. We are happy to answer further questions by phone or message.

Būklė: labai geros būklės (naudotas), Memmert Forced Air Drying Oven / Heating Cabinet Manufacturer: Memmert GmbH + Co. KG Model: UFP 800 For sale is a used Memmert UFP 800, previously used in an industrial setting. Technical Data Model: UFP 800 Protection class: IP20 Kedpey T Idwsfx Amkolt Standard: DIN 12880-KI 3.1 Temperature range: up to approx. 250 °C Connection: 3N~ 400 V / 50-60 Hz Power consumption: approx. 4800 W Current consumption: approx. 7 A External dimensions: approx. 1190 x 750 x 1620 mm Internal dimensions: approx. 1040 x 600 x 1200 mm Volume: approx. 749 liters Weight: approx. 170 kg Features Stainless steel chamber Forced air circulation Digital control Programmable operation possible Glass viewing doors Multiple shelf levels Mobile on castors Condition Used device from commercial use. Visual condition as shown in the photos. Normal signs of use and storage present. Scope of Delivery Memmert UFP 800 heating cabinet Shelves / accessories as shown in the images Delivery strictly as pictured. Notes Sale exclusively to commercial customers. Used item sold without warranty or guarantee. Subject to change, errors, and prior sale. If you have further questions, please feel free to contact us by phone or message.

Būklė: labai geros būklės (naudotas), Type: UF 450plus Air Circulation: Forced convection Temperature Temperature range: +20 °C to +300 °C Working range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Klodpsy T Ictofx Amkot Chamber and Capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Max. number of shelves: 8 Load per shelf: 30 kg Max. total load: 300 kg Chamber: stainless steel, all-round heating External Dimensions and Weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical Data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and Regulation Control system: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, 3-point temperature calibration Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Circulating air: adjustable in 10% increments Fresh air: electronically adjustable Exhaust: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), Protection class 1 Temperature monitor / limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear side: each with 2 lead-throughs of approx. 12 cm diameter Condition: used Scope of delivery: (See picture) (Subject to technical changes and errors, information is subject to change!) For further questions, you are welcome to contact us by phone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: neveikiantis, Ishida IX-G2-4027-H rentgeno aparatas su atmetimo sistema, pagaminimo metai 2014. Kedpfx Aey Tl Eremkelt

Būklė: labai geros būklės (naudotas), LDS Vibration Test System / Shaker System Type: V8-440 HBT750C Combo + SPA56K v3 Manufacturer: LDS Test & Measurement / IMV For sale is a complete electrodynamic vibration test system consisting of an LDS shaker system, SPA56K v3 power amplifier, matching transformer PT65.0/3E, hydraulic unit, and IMV K2+ vibration controller. Suitable for vibration testing, shock testing, endurance testing, environmental simulation, automotive, aerospace, electronics testing, research & development, and industrial quality assurance. Shaker / Vibrator Manufacturer: LDS Test & Measurement Type: V8-440 HBT 750 COMBO Serial Number: 1324-000010 Year of Manufacture: 2007 Air-cooled electrodynamic shaker. Sine Force Peak: 57.8 kN Random Force Peak: 60 kN Shock Force Peak: 264 kN Frequency Range: 5 – 2500 Hz Armature Diameter: approx. 440 mm Air-suspended and vibration-isolated heavy-duty system. Slip Table / Horizontal Table Type: HBT750C XX4 Clamping Surface: 750 x 750 mm 2 hydraulic bearings installed. Max. Pitch Moment: 32.17 kNm Max. Roll Moment: 34.00 kNm Max. Yaw Moment: 24.69 kNm Thread Pitch: 100 mm Thread Inserts: M10 Power Amplifier Manufacturer: LDS Test & Measurement Type: SPA56K v3 Serial Number: 1004913/1 Professional high-performance switching amplifier. Supply Voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current Setting: 415 V Max. Rated Power: 86.9 kVA Matching Transformer Manufacturer: LDS / Romarsh Ltd. Type: PT65.0/3E Serial Number: 07001 Power Rating: 56 kVA Input Voltage Range: 0 – 100V AC Frequency Range: 5 – 2500 Hz Controller IMV K2+ Vibration Control System Multi-channel vibration controller including software, data carrier, license dongle, and documentation. Supported functions according to documentation: - Sine - Resonance Search - Random - Shock - Sine-On-Random - Random-On-Random - Shock Response Spectrum - Notching / Limiting Equipment Complete vibration and shock test system HBT750C slip table included Hydraulic system included Matching transformer included Software package included Documentation included Dimensions / Weight Large industrial installation / heavy-duty system Shaker weight: approx. 2,000 – 2,500 kg Power amplifier weight: approx. 800 – 1,200 kg Matching transformer weight: approx. 500 kg Total system weight: approx. 4,000 – 6,000 kg Transport exclusively via suitable heavy-duty forwarder. Dimensions, weights, and technical data are partially estimated or not fully known. Condition Kodpfx Aoy S U Hiemkslt Used industrial equipment, from industrial operation. Visual condition as shown in pictures. Inspection and testing on-site by appointment possible. Scope of Delivery - LDS V8-440 HBT750C Combo Shaker - LDS SPA56K v3 Power Amplifier - Matching Transformer PT65.0/3E - Hydraulic Power Unit - HBT750C Slip Table - IMV K2+ Controller System - Software / Data Carrier / License Dongle - Documentation and accessories as shown Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors, and prior sale.

Būklė: geras (naudotas), UNHOLTZ-DICKIE / HS-Simulatoren Vibration Test System Type: TA117SA-560 + HS 520 K 60 V Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulatoren Horstmann GmbH For sale is a complete electrodynamic vibration test system including an UNHOLTZ-DICKIE shaker system, SALL50F power amplifier, VWIN II control system, and HS-Simulatoren climate test chamber. Ideally suited for combined vibration and climatic testing in industrial, automotive, aerospace, electronics testing as well as research and development applications. The overhead crane and other hall installations visible in the images are not included in the scope of delivery. Shaker / Vibrator Manufacturer: UNHOLTZ-DICKIE Corporation Type: 560 System: TA117SA-560 Serial number: 259 Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. acceleration (bare table): 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonance frequency: approx. 2200 Hz / approx. 2.2 kHz Armature effective weight: 45 lb / approx. 20.4 kg Driver Coil: 200 A Sine 140 A Random Air-cooled and vibration-isolated system. Power Amplifier Manufacturer: UNHOLTZ-DICKIE Corporation Type: SALL50F Power Amplifier Serial number: 4414 Power Module: PML-50-S Master Controller: MCLL50 Input voltage: 400 V / 3 phase / 50 Hz Power consumption: 41 kVA / 60 A Blower: 15 kVA / 22 A Maximum driver currents: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Forced air cooling / air-cooled. Control System UNHOLTZ-DICKIE VWIN II DSP Vibration Control System including industrial PC / monitor as shown in photos Control Console: MA117SA-560 Serial number: 1838 Charge Amplifier: Klodpfxoy S S Eio Amkjt Type 122P Serial number: 8963 Supported test types: Random Vibration Sine Vibration Resonance Dwell Classical Shock Pulse SRS Shock & Analysis Sine-on-Random Random-on-Random Gunfire Interfaces: TCP/IP RS232 Ethernet USB HS-Simulatoren Climate Test Chamber Manufacturer: HS-Simulatoren Horstmann GmbH Type: HS 520 K 60 V Temperature range: -60 °C to +180 °C Electrical data: 380 V 17 A 10 kW Refrigerants: R13 R502 Equipment Combined climatic and vibration testing Complete electrodynamic test system DSP-based real-time control Forced air cooling system Fully wired test system Original documentation available: Operating Manual Maintenance Manual System Specifications System Diagrams Performance Curves Dimensions / Weight Amplifier: approx. 1000 x 537 x 825 mm Climate test chamber: approx. 1200 x 1800 x 2000 mm Total weight estimated: approx. 2500 – 4000 kg Transport only by suitable heavy-duty freight forwarder. Some technical data are estimated. Specifications may vary. Condition Used system from industrial application. For cosmetic condition see images. Full functionality not completely tested. Inspection by appointment possible and encouraged. Scope of Delivery UNHOLTZ-DICKIE shaker model 560 SALL50F power amplifier Control console / control unit VWIN II controller system Charge amplifier HS-Simulatoren climate chamber HS 520 K 60 V Industrial PC / monitor as shown in images Documentation and accessories as shown in images Loading possible by arrangement. Commercial sale without warranty. Subject to errors and prior sale.

Būklė: labai geros būklės (naudotas), LDS / CTS Vibration Test System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system, consisting of an LDS shaker system, LDS SPA30KCE power amplifier, IMV K2+ vibration controller, and a CTS climate chamber. Ideal for combined vibration and climate testing in automotive, aerospace, electronics testing, research & development, material testing, as well as industrial quality assurance. The blue overhead/gantry crane visible in the pictures is not included in the scope of delivery. Shaker / Vibrator Klsdpfx Asy Sy Npsmkot Manufacturer: Ling Dynamic Systems Ltd. (LDS) Model: V850-440 LPT 750C Air-cooled electrodynamic shaker. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonance frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal payload capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Model: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. power consumption: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: - Sine - Resonance dwell - Limit control - Random - Sine-on-random - PSD limit control - Shock - Scheduler - System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Model: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% rH Nominal voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerants: R452A: 6.8 kg R23: 2.1 kg Equipment: - Combined climate and vibration testing - Slip table / mounting table included - Fully wired test system - Service and maintenance documentation available Slip Table: Clamping surface: approx. 760 x 850 mm Thread insert spacing: approx. 100 mm Dimensions / Weight Large industrial facility / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport only via suitable heavy-duty freight forwarder. Dimensions, weights, and technical data are partially estimated or not fully known. Condition Used industrial plant from previous industrial use. Cosmetic condition as shown in the photos. On-site inspection and testing possible by arrangement. Scope of delivery - LDS V850-440 LPT 750C shaker system - LDS SPA30KCE power amplifier - IMV K2+ vibration controller - Dell Precision PC system - CTS climate chamber CV-70/1100-5 - Slip table / mounting table - Accessories and documentation as shown in photos Not included: Blue overhead/gantry crane. Loading possible by arrangement. Commercial sale without warranty. Subject to change, error, and prior sale.

Gamybos metai: 2025, būklė: beveik kaip naujas (naudotas), Binder MKF 720 E5 climate chamber from 2025. Chamber unused, brand new, 3-year warranty on spare parts. The Binder MKF 720 E5 is a professional climate/environmental chamber designed for stability studies, as well as temperature and climate testing in accordance with DIN and IEC standards. The E5 series represents the latest generation of Binder units, featuring a touchscreen display and advanced programmable control. Key features: * Temperature range: -40°C to +180°C * Humidity range: 10–98% RH * Chamber capacity: approx. 734 liters * APT.line™ preheating chamber technology * Very rapid temperature change capabilities * Humidity control via capacitive sensor + steam humidification * Binder E5 touchscreen controller with segment and time programming * Built-in data logger + data export via USB * Ethernet interface * Heated inspection window with LED lighting * Automatic water supply and drainage management * Inner chamber made of stainless steel Kjdpey Sg Nvsfx Amkelt * Compressor cooling * Refrigerant: R-452A

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Device from 2025, like new. Two-year warranty on spare parts. The Binder KB 240 E6 is a professional refrigerated laboratory incubator with a compressor unit, designed for the cultivation of microorganisms, stability research, material testing, and sample storage at controlled temperatures. The E6 model with R-134a refrigerant belongs to the most highly regarded generations of the KB series thanks to its excellent cooling performance and wide temperature range. Key features: * Temperature range: -10°C to +100°C * Chamber capacity: approx. 247 liters * Compressor-based cooling * BINDER E6 controller with time programming * APT.line™ technology for uniform temperature distribution * Inner door made of tempered glass * Stainless steel chamber * 30 mm access port * RS422 interface / compatible with APT-COM™ Applications: * Incubation of microorganisms Klsdpfoy R Tz Ajx Amket * Biological and pharmaceutical research * Stability testing * Sample storage * Material testing * Temperature simulations Technical specifications: * Capacity: approx. 247 L * Maximum temperature: 100°C * Power supply: 200–230 V * Power: approx. 1.2 kW Advantages of the KB E6 series: * Excellent temperature stability * Effective cooling below ambient temperature * High reliability * More energy efficient than previous generations * Suitable for continuous laboratory operation * Popular model in pharmaceutical and microbiological laboratories

Būklė: geras (naudotas), Binder FED 400 Heating Oven Heating Cabinet / Drying Oven / Laboratory Furnace Industrial-grade unit with forced air circulation Manufacturer: Binder GmbH Model: FED 400 Design: Heating oven with forced air circulation For sale is a used Binder FED 400 heating oven from an industrial site closure. The heating oven is suitable for laboratory, research, development, quality assurance, material testing, and industrial applications. The unit features electronic temperature control, forced air circulation, and a robust industrial-grade stainless steel chamber. Technical Data according to rating plate / manufacturer: Manufacturer: Binder GmbH Model: FED 400 Version: E2 Serial No.: 15-21306 Made in Germany Electrical Data: Operating voltage: 400 V Frequency: 50 / 60 Hz Current type: 3 N~ Rated power: 3.40 kW Current consumption: 7.4 A Protection class: IP20 Temperature Data: Temperature range: up to 300 °C Forced air circulation Safety device according to DIN 12880 Class 2.0 Approximate external dimensions: Width: 1235 mm Height: 1025 mm Depth: 765 mm Chamber dimensions (approx.): Width: 1000 mm Height: 800 mm Depth: 500 mm Internal volume: approx. 400 liters Weight according to manufacturer: approx. 145 kg Features: - Binder FED 400 Heating Oven - Forced air circulation - Digital temperature control - Electronic control system - Stainless steel chamber Kljdpfxsy R Axqe Amkjt - Double-wing doors - Removable shelves - Rear air exhaust port - Industrial and laboratory design Condition: Used equipment with standard signs of age and use. See photos for visual condition. The unit comes from active operation. Scope of Delivery: - Binder FED 400 Heating Oven - Removable shelves - Delivery as shown Notes: Inspection possible by prior appointment. Actual technical data, dimensions, weights, and features may vary. Specifications without guarantee. Subject to prior sale. Commercial sale – sold without warranty.

Būklė: naudotas, Funkcionalumas: nepatikrintas, Complete Metal Testing and Materials Testing Laboratory Industrial QC/Test Laboratory as a Turnkey Package Complete professional metal testing and materials testing laboratory from an industrial quality control environment for sale. Included are, among others: OES metal analysis, universal testing machine, technical cleanliness analysis according to VDA 19 / ISO 16232, metallography equipment, hardness testing, coating thickness measurement, laboratory balances, water analysis, laboratory devices, extensive Köttermann laboratory furnishings, and consumables. Manufacturers include: AMETEK/SPECTRO, GALDABINI, JOMESA, Struers, Fischer, List, Ernst, Zeiss, KERN, Mettler, IKA, Memmert, Macherey-Nagel, Hanna, WTW, and Köttermann. Key Features at a Glance AMETEK / SPECTRO SPECTROTEST TXC02 UV mobile OES metal analyzer GALDABINI QUASAR 100 universal testing machine / tensile tester 100 kN JOMESA filter analysis system for technical cleanliness according to VDA 19 / ISO 16232 Struers TransPol-5 mobile metallographic grinding and polishing system Struers Rotopol-2 metallographic grinding and polishing machine Fischer DELTASCOPE FMP30 coating thickness measurement system List-Magnetik MEGA-CHECK Master coating thickness gauge Ernst Computest SC mobile hardness testing system Klsdpey Rglnjfx Amkst Carl Zeiss Jena Neophot metallographic reflected light microscope Köttermann laboratory fume hoods, laboratory benches, hazardous material cabinets, and chemical cabinets Extensive laboratory consumables, lab glassware, and accessories Complete object description available in the documentation.

Būklė: geras (naudotas), KÖHLER Corrosion Test Chamber HK-400 Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Identification: SSK_Köhler_0400-01 PN: 1356 Offered for sale is a KÖHLER corrosion test chamber suitable for salt spray, condensation, and corrosion testing in industrial, research, development, and quality assurance applications. The system is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the equipment corresponds to a KÖHLER HK-400 model configured for salt spray and condensation testing. Technical data: Test chamber volume: approx. 400 litres Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: Ambient +10 °C up to approx. +55 °C Voltage: 220 V / 50 Hz Features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test racks / trays Integrated pressure gauges Media supply connections Industrial design Possible test methods: Salt spray (fog) testing Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial tests Condition: Used equipment with age- and usage-related signs of wear. Visual condition as shown in the pictures. Important note: The original manufacturer’s nameplate is not present on the equipment. Technical specifications have been compiled on the basis of visible markings, images, and comparable KÖHLER HK-400 manufacturer specifications. Scope of delivery: Equipment as pictured Scope of delivery as shown in images Klsdsy N R Taepfx Amkst Other: Inspection by appointment possible. Loading can be organized. Commercial sale – Sold without warranty. (Subject to change and errors excepted)

Būklė: geras (naudotas), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Model: PL-3KPH Version: Air-cooled temperature and climate test chamber For sale is a pre-owned ESPEC climate test chamber for temperature and environmental testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Kedpfx Amjy N Awqekelt Electrical connection: AC 400 V / 3~ / 50 Hz Max. current consumption: approx. 11 A Weight: approx. 350 kg Cooling: air-cooled No external water connection required Refrigerant (as per label): R452A – approx. 1.2 kg Equipment: Touchscreen control Programmable and constant operation modes Temperature and humidity control Observation window in the door Stainless steel test chamber interior Interior illumination / chamber lamp Lateral cable/pipe port, Ø approx. 100 mm Overheat protector Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connector Condition: Used device with age- and use-related signs of wear. Some rust and corrosion visible at the lower housing area. Signs of use present inside the chamber. See photos for cosmetic condition. Scope of Delivery: ESPEC climate test chamber PL-3KPH One shelf included Scope of delivery as shown Service: Function check and replacement of necessary components Recharging with compliant refrigerant as required Leak test with certification Documented test run Notes: Inspection possible by appointment. Loading can be arranged. Commercial sale – sold without warranty. Subject to change and errors.

Būklė: geras (naudotas), Feutron temperature test chamber -40 to +100°C The Feutron TPK 3403/125 is a workhorse for standardized temperature testing due to its robust construction. The main areas of application for this model are: 1. Electronics and component testing This is the most common application. It focuses on how components react to extreme temperatures: - Functional testing: Does the circuit board still work flawlessly at -40°C or +150°C? - Burn-in tests: Artificial aging of components by continuous operation at high temperature to provoke early failures. 2. Material testing Examining physical changes in materials: - Brittleness: Do plastics or rubber seals become brittle in the cold? - Deformation: Do composites warp when exposed to heat? - Storage tests: How stable are chemicals or adhesives over long periods at constant temperature? 3. Quality assurance (QA) Kedpfjy Nynaex Amkolt - Spot checks: Series-accompanying tests to ensure that production stays within the specified temperature ranges. - Compliance testing: Tests according to common industrial standards (e.g., DIN EN 60068) that prescribe specific temperature profiles. 4. Research & Development - Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power supply: 220/280V-3-50Hz Fusing: 25 A Degree of protection: IP 20 Weight: 480 kg "All from a single source: We are happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Būklė: labai geros būklės (naudotas), Binder Temperature Test Chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber designed for professional thermal and cold testing in industry, research, development, and quality assurance. The temperature test chambers of the Binder MK series are particularly suitable for cyclic temperature tests and repeatable testing under defined environmental conditions. This test chamber enables temperature tests in the range from -40 °C to +180 °C and presents an efficient alternative to custom-tailored solutions. Technical data: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K (depending on setpoint) Temporal temperature deviation: 0.1 to 0.5 ± K (depending on setpoint) Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Equipment: 2 x access ports Ø 70 mm 1 door 2 standard shelves / max. 6 shelves possible Electrical data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: approx. 320 kg Buyer safety guarantee: Kjdpfx Aey Nic Hsmkslt The following steps are performed on all offered chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is performed. Condition: Used Scope of delivery: Scope of delivery as seen in pictures Inspection possible by appointment. Loading can be arranged. Sale without warranty. (Specifications are subject to change and errors excepted)

Būklė: labai geros būklės (naudotas), Binder Temperature Test Chamber Model: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber, designed for professional heat and cold testing in industrial, research, development, and quality assurance applications. The temperature test chambers from the Binder MK series are particularly suitable for cyclical temperature testing and reproducible tests under defined environmental conditions. This chamber enables temperature testing within a range of -40 °C to +180 °C and represents an efficient alternative to custom-built solutions. Technical Data: Temperature Range: -40 °C to +180 °C Test Chamber Volume: approx. 228 liters Temperature Performance Data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test Chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load Capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x access ports Ø 70 mm 1 door 2 standard shelves / up to 6 shelves possible Electrical Data: Rated voltage: 400 V Mains frequency: 50 Hz Rated power: approx. 4.0 kW Fuse protection: 16 A Phases: 3~ Weight: approx. 320 kg Condition: Used Scope of delivery: Scope of delivery as per images Inspection by appointment possible. Klodpfsy Nicmsx Amkot Loading can be organized. Sale without warranty. (Specifications subject to change and errors excepted)

Būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber Model: WT3-600/70/5 Manufacturer: Weiss Umwelttechnik For sale is a high-quality Weiss temperature test chamber WT3-600/70/5, suitable for professional temperature testing in industry, research, development, and quality assurance. The unit features a modern S!MCON / 32 controller with touch panel for convenient operation and programming of testing procedures. This test chamber is water-cooled and designed for demanding temperature tests in the range of -70 °C to +180 °C. Features: - S!MCON / 32 controller - Control unit with touch panel - Adjustable feet - Access ports on left and right - R1 access port NW 125 mm - L1 access port NW 50 mm - Chamber illumination - Water-cooled version Technical Data: - Temperature range: -70 °C to +180 °C - Test chamber volume: approx. 600 liters - Interior dimensions: approx. 800 x 950 x 800 mm (W x H x D) Temperature Performance Data: - Temporal temperature deviation: ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 1.5 K - Heating rate: approx. 7.5 K/min - Cooling rate: approx. 7.5 K/min - Heat compensation: max. 2500 W Electrical Data: - Mains connection: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: approx. 23 A - Rated power: approx. 13 kW - Fuse protection: 16 A slow-blow Refrigerants: - R404A / R23 Dimensions: With hinges and door lock: approx. 1090 x 1995 x 1660 mm (W x H x D) Without hinges and door lock: approx. 1000 x 1995 x 1660 mm (W x H x D) Weight: - approx. 620 kg Sound Pressure Level: - approx. 58 dB(A) Condition: - Used Scope of Supply: - Scope of delivery as per pictures Inspection available by appointment. Loading can be organized. Sale without warranty. Kodpsy Nibpofx Amkolt (Subject to change and errors)

Būklė: labai geros būklės (naudotas), CTS Climate Test Chamber C-70/600 Type: C-70/600 Manufacturer: CTS Klima Temperatur Systeme Version: Water-cooled For sale: CTS climate test chamber for temperature and climatic testing in industry, research, development, and quality assurance. Condition / Display: Used unit, visual condition as shown in pictures. Display in manual mode / stop. Actual temperature value: 16.59 °C Set temperature value: 5.00 °C Actual humidity value: 39.7% r.h. Water reservoir: 11.0 l Special feature: Extended temperature range up to +210 °C (most standard models only up to +180 °C) Technical data: Temperature range: -70 °C to +210 °C Humidity range: 10% to 98% r.h. Dew point range: -10 °C to +94 °C Temperature change rate: approx. 2.5 K/min (heating/cooling) Test chamber volume: approx. 600 liters Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.0 kW Rated current: approx. 14.6 A Protection class: IP 22 Refrigeration system: Refrigerant: R452A / R23 Cascade refrigeration system for low temperatures down to -70 °C Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Test chamber: Internal dimensions: approx. 850 x 850 x 830 mm Dimensions: approx. 1900 x 1115 x 1850 mm Weight: approx. 800 kg (depending on configuration) Equipment: Observation window Stainless steel test chamber Digital setpoint/actual value display Test specimen protection / temperature limiter DI water connection Condensate drain Cable feedthroughs RS232 interface Digital outputs for test item control Scope of delivery: CTS climate test chamber C-70/600 Scope of delivery as shown Service / Preparation: Function check and replacement of necessary components Refilling with legally compliant refrigerant (if required) Leakage test with certificate Documented test run Ksdpjy I Tdxofx Amkelt Miscellaneous: Inspection possible by appointment Loading can be organized Commercial sale – sold without warranty. (Subject to change and errors excepted)

Būklė: labai geros būklės (naudotas), CTS Temperature Shock Test Chamber Model: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Configuration: Air-cooled For sale is a CTS temperature shock test chamber suitable for rapid temperature change and thermal shock testing in industrial, research, and development applications. Technical Specifications: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Performance Data: - Heating rate: approx. 6 K/min - Cooling rate: approx. 6 K/min - Temperature change rate: up to approx. 100 K/min - Changeover time: < 10 seconds - Temperature deviation: ±1 K / ±2 K Electrical Data: - Connection: 400 V / 3/N / 50 Hz - Rated power: approx. 9.7 kW - Rated current: approx. 15.4 A - Fuse protection: 16 A slow-blow - Protection class: IP 22 Refrigerants: - R404A: 2.3 kg - R23: 0.90 kg Pressure Data: - Operating overpressure: 25 bar - Test pressure: 27.5 bar Dimensions: - Approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: - Approx. 650 kg Additional Data: - Sound pressure level: < 58 dB(A) - Compressed air connection: 1/4" male thread Equipment: - Two-chamber system (hot / cold chamber) - Digital CTS control unit - Display / control panel - Programmable operation - Operating hour counter - Viewing window - Interior lighting - Temperature limiter - Specimen protection Klodpfx Amey I Ntcoket - RS232 interface Documentation: - Declaration of conformity included - Test certificates included - Operating manual included - Circuit diagram included - Piping diagram included - Quick start instruction included - Safety data sheets included Note: The table shown in the photos is not included in the sale. Condition: - Used - Visual condition as shown in the photos - Scope of delivery as pictured Inspection available by appointment. Loading can be arranged. Commercial sale. Sold without warranty. (Subject to change and error)

Gamybos metai: 2019, veikimo valandos: 3 577 h, būklė: labai geros būklės (naudotas), Weiss Climate Test Chamber ClimeEvent C/1000/70/5 Model: C/1000/70/5 Manufacturer: Weiss Technik GmbH Year of manufacture: 2019 Design: water-cooled Operating hours: approx. 3,577 h For sale is a Weiss ClimeEvent climate chamber with a 1,000-liter test volume. Suitable for temperature and climate testing in industrial, automotive, electronics, as well as research and development applications. Temperature and Climate Data: Temperature range: approx. -70 °C to +180 °C Temperature change rate: up to approx. 5 K/min Humidity range: approx. 10% to 98% RH Test Chamber: Volume: approx. 1,000 liters Internal dimensions: approx. 950 x 1100 x 950 mm Dimensions: Kjdey Iyx Aopfx Amkslt External dimensions: approx. 2000 x 1415 x 2030 mm Electrical Data: Power supply: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 21 kW Rated current: approx. 34 A Refrigerants: R449A R23 Weight: approx. 1,300 kg Applications: Temperature testing Climatic testing with humidity Thermal cycling tests Endurance testing Condition: Used Unit was last in operation Scope of delivery: Weiss ClimeEvent C/1000/70/5 Accessories as shown in photos Inspection available by appointment. Loading can be arranged. Sale without warranty. (Specifications subject to change)

Būklė: labai geros būklės (naudotas), Vötsch Temperature Shock Test Chamber Model: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Version: Water-cooled For sale is a Vötsch temperature shock test chamber in a two-zone design for rapid temperature change testing. Suitable for industrial applications, automotive industry, aerospace as well as research and development. Temperature Ranges: Hot chamber: +50 °C to +220 °C Cold chamber: -80 °C to +70 °C Kledpfx Aey Iyuwjmkot Temperature Data: Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Heating rate hot chamber: approx. 11 K/min Heating rate cold chamber: approx. 2 K/min Cooling rate: approx. 3 K/min Test Chamber: Volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable port: Ø 67 mm Electrical Data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerants: R404A: 2.9 kg R23: 1.27 kg Pressure Data: Low pressure max.: 22.5 bar High pressure max.: 25 bar Dimensions: Approx. 930 x 2115 x 1970 mm Weight: Approx. 1000 kg Features: Two-chamber shock test system Digital control Program operation Observation window Cable port Condition: Used Control system overhauled and newly wired Operator panel replaced Spindle and spindle motor replaced Plate heat exchanger insulated Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Accessories as shown in the pictures Viewing possible by appointment. Loading can be organized. Sale without warranty. (Subject to change)

Būklė: labai geros būklės (naudotas), LDS / CTS Vibration Test System Model: V895-440 HBT SP + CTS CV-70/1700-10 Manufacturer: Ling Dynamic Systems (LDS) / CTS For sale is a complete electrodynamic vibration test system consisting of LDS shaker, SPA56K power amplifier, K2+ control system, and CTS climatic chamber. Ideal for combined vibration and climate testing in industrial, automotive, aerospace sectors, as well as research and development. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (UK) Model: V895-440 HBT SP Air-cooled vibrator Armature diameter: 440 mm Frequency range: DC – 2100 Hz Sine force: 55.6 kN Shock force: 166.8 kN Max acceleration: 981 m/s² Max velocity: 1.6 m/s Displacement: 63.5 mm pk-pk Payload: approx. 700 kg Air-bearing and vibration-isolated system. Compressed air supply required. Power Amplifier Manufacturer: LDS Model: SPA56K v3 V890/5 Class-D high-power switching amplifier Industrial air-cooled design Supply voltage: 415 V Max power requirement: 86.9 kVA Efficiency: >90% Controller display: Amplifier: SPA8/16K_v3 Vibrator: V830_185 Control System IMV K2+ Vibration Control System Multi-channel control system incl. Dell Precision PC system, monitor, keyboard, and mouse CTS Climatic Chamber Manufacturer: CTS Clima Temperatur Systeme Model: CV-70/1700-10 Year of manufacture: 03/2020 Temperature range: -70 °C to +180 °C Humidity range: 10% to 95% RH Klodsy Iwp Sjpfx Amket Volume: approx. 1,700 liters Rated voltage: 400 V / 3/N / 50 Hz Power: 21.9 kW Rated current: 37.1 A Refrigerants: R452A: 9.5 kg R23: 3.7 kg Features Combined climate and vibration testing Slip table / mounting table included Vibration-isolated installation Programmable operation possible Slip Table 760 mm x 850 mm Threaded insert spacing: 100 mm Activated Licenses: Excitation types Sine, resonant dwelling, limit control, amplitude dwelling Multi sweep Sine, noise soft clipping, sine-on-random PSD limit control, shock Extensions Scheduler, multi-language, launcher, system monitor Weight Shaker: approx. 3.0 – 3.2 t Total weight: approx. 6,000 – 7,000 kg Condition Used system Unit was last in operation System starts / control active Power-on inspection possible Scope of Delivery LDS V895-440 HBT SP shaker LDS SPA56K amplifier IMV K2+ system Complete PC system CTS climatic chamber Accessories as shown in the images Loading possible. Sale without warranty. Subject to prior sale and modifications.

Būklė: labai geros būklės (naudotas), CTS Climate Test Chamber C-70/1000-S Device Data Manufacturer: CTS GmbH Model: C-70/1000-S Year of manufacture: 08/2011 Serial number: 113054 Version: Climate test chamber / Environmental simulation chamber Cooling: water-cooled Description Used CTS climate test chamber for precise temperature and climate testing. Suitable for material, component, and reliability testing. Applications in industry, research, development, and quality assurance. Temperature & Climate Specifications Temperature range: -70 °C to +180 °C Temperature change rate: approx. 2.5 K/min heating Temperature change rate: approx. 2.5 K/min cooling Humidity range: 10% to 98% r.H. Dew point range I: +7 °C to +94 °C Dew point range II: -10 °C to +7 °C Electrical Data 400 V / 3/N / 50 Hz Power: 9.7 kW Current: 17.9 A Protection class: IP 22 Refrigeration System Refrigerant: R404A / R23 Pre-cooling stage: R404A, 2.3 kg Cooling stage: R23, 0.86 kg / 15 bar Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features CTS control panel with LCD display Programmable operation Digital setpoint/actual value display Viewing window in the door Stainless steel test chamber Sample protection / Temperature limiter Interior lighting Side cable ports Feedthroughs approx. 50 mm and approx. 125 mm RS232 interface according to documentation Digital outputs for sample control Mobile design on castors Dimensions Test chamber volume: approx. 1000 liters External (W x D x H): approx. 2245 x 1270 x 1950 mm Access dimensions (W x D x H): approx. 2350 x 1290 x 2000 mm Weight Test chamber: approx. 1000 kg Recooler: approx. 120 kg Documentation Declaration of conformity Test certificates Operating instructions Messages and digital channels Installation plan Quick start guide Humidity diagram Scope of Delivery CTS climate test chamber C-70/1000-S Available documentation Scope of delivery as shown Optional Pre-shipment Service Functional test Refrigerant service Leak tightness test Test run with report Condition Used. For condition please see pictures. Note Kjdpfjy Iam Hsx Amkolt Used device, sale without warranty. Inspection by prior arrangement possible. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, please do not hesitate to contact us.

Būklė: labai geros būklės (naudotas), RS Simulators Thermal Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was taken out of operation. Device Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Version: Thermal shock chamber Cooling: water-cooled Description Used thermal shock chamber for standard-compliant thermoshock testing. Suitable for material, component and reliability testing. Applications in industry, automotive, research, and quality assurance. System Description 2 separate temperature chambers (hot / cold) Automatic horizontal test basket transfer Fast changeover mode for thermal shock tests Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Temporal deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Interior (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water requirement: max. 3.2 m³/h Cooling water return: non-pressurized Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight approx. 2800 kg Equipment Horizontal basket movement C-rails in test chamber Large test basket (>1000 mm) Observation window Internal lighting SE-604 control unit Program operation and data recording RS232 interface Cooling System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs. Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25% to 75% r.h. Scope of Delivery RS Simulators thermal shock chamber ST2K 1000 / 55 Scope of delivery as pictured Klodpjy H Igfofx Amkot Service prior to delivery (optional): - Functional check - Refrigerant service - Leak test - Test run with protocol Condition Used. Condition as shown in pictures. Notice Used machine, sale without warranty. Viewing by appointment possible. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Būklė: labai geros būklės (naudotas), RS-Simulatoren Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KSS 600/75-10K Design: Climate Test Chamber / Environmental Simulation Chamber Cooling: Water-cooled Description Pre-owned climate chamber from RS-Simulatoren. Suitable for temperature testing, climate tests, and material/aging tests. Intended for use in industrial testing and measurement applications. Technical Specifications Temperature range: -75 °C to +180 °C Temperature change rate (heating/cooling): approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerants: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight Approx. 1,400 kg Equipment RS-Simulatoren control / operating panel Program operation Observation window Test chamber temperature monitoring Operating hours counter Side cable ports Heavy-duty industrial construction Scope of Delivery RS-Simulatoren Climate Chamber KSS 600/75-10K Delivery as shown Optional Pre-Delivery Service Functional check Refrigerant service Leakage test Trial run with test report Condition Used item. Condition as shown in the pictures. Note Kljdpjy H Ib Asfx Amket Used equipment, sold without warranty. Inspection by appointment possible. Loading and transport can be organized upon request. Subject to prior sale and technical modifications. If you have any questions, feel free to contact us.