P. Lienbacher Holzbauwerk

Sąlyga: geras (naudotas), Gamybos metai: 1991, maks. pjovimo ilgis 510 mm Iijdoxpi Ugspfx Acujh pjūklo disko skersmuo 450 mm 4 kW variklis ritininiai stalai su sustojimu abiejose pusėse, kiekvienas po 2 m ilgio

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Holtec paketavimo pjūklas su mobiliu HF 121 pjūklu. Puikios būklės. Vieta: Mešedė. Galime išardyti ir pakrauti mes patys. Iodpoxph Uxjfx Acuoih

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 1 300 mm, pjovimo plotis (maks.): 1 300 mm, bendras svoris: 9 000 kg, ruošinio svoris (maks.): 8 000 kg, pjūklo pavara: 11 000 W, The OBS1300 bundle-cutting saw has been developed to optimize production in terms of time and process efficiency when formatting material to the desired length. The presented machine is available immediately; we invite you to inspection. Technical specifications: • Maximum bundle size (width/height): 1300 x 1300 millimeters • Minimum bundle size (width/height): 800 x 800 millimeters (hydraulic clamp operation limit; it is permissible to cut bundles with smaller dimensions) • Additional equipment for cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 millimeters • Maximum input bundle length: 6000 mm • Maximum bundle weight: 8,000 kilograms • Cutting accuracy: +/- 2 millimeters • Dedicated guide bar lubrication unit • GB TITANIUM cutting guide (rigid and massive, milled from a single piece of steel. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • WEG 11 kW guide drive motor • Fast measuring system with absolute encoder (retains position even after power loss) and positioning accuracy of 0.2 millimeters • Innovative strapping (banding) system with an intelligent binding position determination system based on programmed cutting lengths • System of three sets of hydraulic clamps • Hydraulic system built with PONAR components • Transverse loading conveyor introducing bundles onto the machine • Intelligent unloading system, transverse chain conveyor • System with two pairs of tilting (hydraulic) rollers allowing large offcuts to drop freely onto the conveyor • TA DRIVE gearmotors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touch operator panel • SIEMENS PLC controller (with remote access system) • SICK safety system and sensors Isdpoxn Rt Uefx Acuoih Warranty: 12-month warranty. Service response time: 24 hours. Spare and consumable parts warehouse. With the machine, we provide: • User manual • Declarations of conformity • Warranty card • Electrical diagrams • Hydraulic diagrams

Sąlyga: naudotas, Gamybos metai: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CETRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned one above the other. The right saw unit is fixed; the left unit can be adjusted. The preset cutting length can be read on a digital measuring display. Both units feature supports that enable the simultaneous cutting of 2 glazing beads. To cut larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing aside to facilitate the loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital measuring display • Pressure switch • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool kit • Safety guards with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit stroke • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optional 4000 mm) Iiodpfexnlgcjx Acuoh • Min. cutting length: 158 mm • Weight: 217 kg • Space requirement (standard equipment): 3000 x 850 mm EXTENDED CUTTING CAPACITY 1 pc Maximum cutting length: 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for adjusting up to 4 intermediate angles Additional central support 1 pc Adaptations for rebated profiles 1 pc Adaptations for rebated profiles as per drawing: - Attachment on the clamping devices to compensate for the profile inclination - Spacers on the rear stops of the units and the central support In the sketch below (in green), a beveled pusher is shown, which follows the inclined profile and presses it against the (red) spacer on the stop. Location: Garbsen

Sąlyga: naudotas, Maximum cutting width: 250 mm Maximum cutting height: 80 mm Saw blade diameter: 400 mm Motor power: 3.0 kW Speed: 2800 rpm Compressed air connection: 6-8 bar Working height: 900 ±20 mm Dimensions (L/W/H): 530 x 869 x 1217 mm SALVAMAC Legend 400 Fast semi-automatic crosscut saw ----- Maximum cutting range: 220 x 80 / 250 x 50 mm. (When sawing stacked boards, please note: rear fence height 100 mm) The structure is entirely made from robust, thick-walled steel, fully painted and reinforced. A solid floor anchoring system is equipped with flanged steel feet to ensure secure fastening. Two-handed operation is ergonomically positioned to allow comfortable and efficient use. Saw motor power: 3.0 kW. The cutting speed can be adjusted via a pneumatic regulator, enabling precise controls. Furthermore, the system is equipped with a shock-absorbing mechanism to minimize vibrations and enhance workplace safety. TCT circular saw blade, diameter 400 mm, Z=96. The top pressure hood is controlled electro-pneumatically for precise operation. The hood movement system operates via innovative ball bearings with double dust protection and an automatic lubrication system, guaranteeing smooth performance. Additionally, the electrical installation is compliant with CE standards. CE models are supplied as standard with infeed and outfeed tables of at least 1 meter in length (either with idler rollers or a flat table) to optimize operation and meet safety requirements. Technical data: ----- Max. cutting cross-section: 220 x 80 / 250 x 50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: TCT Z=96 Blade rotational speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction socket: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400V / 50 Hz, 3-phase Working table height: 900 mm ± 20 mm Colour: RAL 7035 ----- Total price ex works: on request! ----- Iisdpjxmk Ddofx Acush Options such as: - Infeed/outfeed with idler rollers or flat table - Mechanical or pneumatic stops - Electronic length stop / Salvastop (Combo Series) - Movable front guard and more available on request! ----- (Technical data as per manufacturer – subject to change without notice!)

Sąlyga: naudotas, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideal for precise and efficient cross-cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Data • Maximum cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Compliance marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet by freight forwarder available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and errors excepted. Ijdpexiza Usfx Acujih

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 035-110235, pjūklo disko skersmuo: 650 mm, pjovimo aukštis (maks.): 245 mm, įvesties srovės tipas: trifazis, AVOLA - APOVALUS PJŪKLAS GAMA65K skersiniam ir kampiniam pjovimui - Modulinė GAMA sistema jūsų individualiems medžio apdirbimo poreikiams - Techninė įranga Isdpfx Aexhg Sgocueih Variklio galia 10 kW – tiesioginė pavara – Variklio greitis 3.000 aps./min / disko greitis 3.000 aps./min Pjūklo disko aukštis 90° – 245 mm; 45° – 164 mm; 30° – 113 mm Elektrinis pjūklo disko pakreipimas 90°–30° su skaitmeniniu rodmeniu Sukamasis stalas 30°–150° Automatinis veržimo gaubtas Pneumatinis skersinio pjovimo mechanizmas / Lazerinė linija skersiniam pjovimui TCT pjūklo diskas 650 / 30 mm

Sąlyga: beveik kaip naujas (naudotas), elektroninis disko pokrypio kampo reguliavimas 90 - 45 laipsnių maksimalus pjovimo plotis 650 mm Iijdpfx Ajxfr Etocuoh elektroninis pjūklo aukščio reguliavimas automatinis medžiagos padavimas valdymo jutiklinis ekranas lazeris sukamasis darbo stalas 0-345 laipsnių maksimalus disko skersmuo 800 mm variklio galia 15 KW gamybos metai 2016 CE žymėjimas 400 V

Sąlyga: naudotas, Gamybos metai: 1976, Sandėlio vieta: Nattheim Iijdsxc Ntcepfx Acujh

Sąlyga: naudotas, Gamybos metai: 1999, Pjovimo aukštis 90° kampu: 135 mm Pjovimo ilgis: mm Pjūklo diskas pasukamas ir pakreipiamas: taip Vertikalus kampas: -60° iki +60° Volelių takelis / atraminis stalas: ne Pjūklo disko skersmuo: Sūkių dažnis: 2800 aps./min Ijdpfx Aexc Hklscusih Variklio galia: 2 kW Variklio stabdis: taip Nusiurbimo jungtis: 100 mm Staklių ilgis: Staklių plotis: Svoris: 110 kg

Sąlyga: naudotas, Gamybos metai: 1997, Pjovimo aukštis prie 90°: 170 mm Pjovimo ilgis: 410 mm Horizontalaus kampo reguliavimas: 45°–90°–25° Vertikalaus kampo reguliavimas: -60° iki +60° Ritinėlių stalas / atraminis stalas: ne Prispaudėjas: taip Aušinimo įranga: taip Pjūklo disko skersmuo: 420 mm Sūkių dažnis: 2800 aps./min. Variklio galia: 2,2 kW Isdpfoxc Hkfex Acujih Variklio stabdis: taip Ištraukimo jungtis: 100 mm Staklių ilgis: 1,20 m Staklių plotis: 0,70 m Staklių aukštis: 1,50 m Svoris: 110 kg

Sąlyga: labai geros būklės (naudotas), Labai geros būklės. Iisdsxcll Uspfx Acush

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 80 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Stromag CT 600 F, pjūklo disko skersmuo: 600 mm, pjovimo aukštis (maks.): 410 mm, padavimo ilgis X ašis: 7 000 mm, X ašies padavimo greitis: 90 m/min, pjovimo plotis (maks.): 250 mm, bendras ilgis: 12 000 mm, bendras svoris: 2 700 kg, įvesties srovės tipas: trifazis, ruošinio svoris (maks.): 80 kg, pjovimo ilgis (maks.): 6 600 mm, oro poreikis: 350 m³/val, įėjimo įtampa: 400 V, ištraukimo jungties skersmuo: 110 mm, ašies variklio galia: 7 500 W, pagrindinis pjūklo diskas skersmuo: 600 mm, pjūklo disko greitis: 2 560 aps./min, darbinis slėgis: 6 juosta, Mažai naudotas. Yra ir frezavimo stotis. Iiodpfxoxcihgs Acuoh

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 550 mm, pjovimo aukštis (maks.): 210 mm, bendras svoris: 220 kg, Radialinė pjovimo staklė Harwi 625 - H - 2K Pjovimo aukštis: 210 mm Pjūklo radialinis ilgis: 1250 mm Variklio galia: 5 kW (stiprus stabdis) Pjūklo diskas: 550 mm Ištraukimo jungtis: 1x 120 mm + 1x 80 mm Iodpfxjxcat Ts Acuoih Staklė mažai naudota, techniškai ir vizualiai tobuloje būklėje Staklė gali būti pademonstruota Iki lapkričio ji dar bus naudojama vienam projektui Abu stalai (priekinis ir galinis) taip pat parduodami. Stalai su rutuliniais voleliais ir yra judinami.

Sąlyga: naudotas, Gamybos metai: 2025, New display machine! Partnership Edition, incl.: - 1 meter roller conveyor to the right of the saw, with galvanized rollers. - 1 meter roller conveyor to the left of the saw, with galvanized rollers. - 1 piece pneumatically swiveling stop, 200 mm length, with operator switch mounted on the saw frame. SAFE – SOLID – FAST The compact, simple, robust, and innovative machine guarantees maximum safety, flexibility, and reliability. Standard accessories: - Automatic guard and pressure device - Ergonomically positioned two-hand control - Fixed protective shield Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 350 mm. Including rear 100 mm high stop ruler. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 350 mm. Including rear 100 mm high stop ruler with scale. - 1 piece HM saw blade 500 mm, Z = 108 Technical specifications: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm Compressed air: max. 8 bar Ijdjw Tfzlepfx Acujih Air consumption per cycle: 5 Nl Extraction ports: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop and saw blade: 70 mm Minimum distance between 2 stops: 60 mm

Sąlyga: naudotas, Gamybos metai: 2022, Sunkiasvorė stumiamoji krumpliaračio ir kreipiančioji sistema Įvesties talpa 6000 mm Ø600 pjūklo diskas 10 AG pjūklo variklis Automatinis kampo nustatymas (+70 - 70 laipsnių) Vertikalus spaudimas Isdpfx Ajw Tar Eocusih Horizontalus spaudimas Elektriškai užrakinamas apsauginis gaubtas Jutiklinis ekrano valdiklis 12" spalvotas ekranas Pilna optimizacija 1000 mm išvesties stalas

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 054530, galia: 10 kW (13,60 AG), For sale is a fully operational Reinhardt cross-cut saw Slim Line SL 170 (year of manufacture: 2005). The machine will remain in use at our facility until calendar week 41/2025 and can be inspected on site at any time by appointment. Dismantling is scheduled for week 41/2025. The machine was used in our wood packaging department. Technical data / equipment: - Model: Slim Line SL170 (Reinhardt) - Year: 2005 - Power supply: 10 kW (saw unit 7.5 kW) - Max. cutting width: 290 mm (specification: 50*380 mm) - Max. cutting height: 170 mm - Saw blade diameter: 600 mm - Saw blade bore: 30 mm - Feed speed: 90 m/min - Weight: approx. 2 t - Dimensions: approx. 12,610 mm x 1,908 mm - Extraction port diameter: 2 x 125 mm - Cutting length: up to 5 m possible - Maintenance: Ejectors were renewed in December (cost approx. €6,000 net) - Documentation: Operating manual and spare parts list available Condition: Well-maintained and fully functional, currently in operation. Detailed photos and further information available upon request. Iisdpow S Tvnofx Acuoh Location / Inspection: Location: 83549 Eiselfing – inspection possible at any time by arrangement. Dismantling in week 41/2025. Contact: If you are interested or would like to arrange a viewing appointment, please contact: 08071 919 267. All information provided without guarantee. Subject to prior sale and errors.

Sąlyga: naujas, Gamybos metai: 2024, pjūklo disko skersmuo: 500 mm, pjovimo aukštis (maks.): 175 mm, Aliuminio svirtis. Agregatas juda tiesinėse kreipiančiose. Pastovi nulinė padėtis net keičiant pjovimo kampą. Automatinis pjūklo apsaugos gaubto atidarymas – pneumatiniu būdu. Grąžinimo spyruoklė agregato grąžinimui į pradinę padėtį. Darbo stalas su keičiama MDF aukojamąja plokšte. Visiškai prieinama valdymo pusė – iš priekio. Variklis: 400/3/50, 5,5 AG (4 kW). Bendras svoris: 320 kg. Komplektacija: - HM pjūklo diskas Ø500 mm, F=30 - Variklio apsisukimų dažnis: 2800 aps./min. - Horizontalus švytavimas: +60° / 0° / -45° - Vertikalus švytavimas: 0° / +45° - Horizontalus švytavimas pneumatiniu būdu užfiksuotas Dulkių siurbimo mova: 150 mm Pjovimo plotis horiz. švytavimo metu: - prie 90°: 600 mm - prie 60° pasukimo: 300 mm - prie 45° pasukimo: 420 mm Pjovimo aukštis vertikalaus švytavimo metu: - prie 0°: 175 mm - prie 15°: 130 mm - prie 45° nuožulnumas: 100 mm. Iiedpfxjw S Ddcj Acuoh

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Iisdpfxew Sy T Ho Acueh Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, Holtec pakuočių atpjovimo pjūklas Vario Cut su Holtec mechanizacija. Jörg Elektronik. Visiškas atliekų pašalinimas po pjovimo linija. Iedpjw Smz Defx Acueih

Sąlyga: dilaminuotas dirbtuvėje (naudotas), - Paul skersavimo pjūklas 15 AO - hidraulinis pjūklo kėlimas Isdpfxew Slgfs Acuoih - 150 mm pjovimo aukštis - 500 mm maks. pjovimo plotis - 1 nevaromas ritininis konvejeris, apie 1 600 mm ilgio

Sąlyga: naudotas, Gamybos metai: 1994, Pjovimo ilgio skalė iki 5000 mm, pjūklo diskas 420 mm, ritininis konvejeris 1500 mm Iedpsw Sadrsfx Acueih Sandėlio vieta: klientas

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Semi-automatic under-table crosscut saw, including: 2 meter roller conveyor on the left side of the saw with 1 manual flip stop and 1 pneumatic flip stop 2 meter roller conveyor on the right side of the saw General Technical Data: Maximum cutting range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction ports: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph Working height: 900 mm +/- 20 mm Standard accessories: Iodpfxew Rcibs Acusih Automatic safety and pressure device Two-hand control and protective shield Carbide-tipped (HM) saw blade SAFE The ergonomically positioned two-hand control and the blade guard ensure absolutely safe operation. Safe, protected, and reliable! SOLID The LEGEND saws are designed and built to work even under demanding conditions and with hard woods. The structure is made from thick-walled, fully-coated reinforced steel. Solid, compact, and resilient. FAST Compared to a pull or radial arm saw, the LEGEND guides the saw blade pneumatically and extremely quickly through the workpiece. As a result, the physical strain on the operator is significantly reduced.

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7722 TECHNINIAI DUOMENYS - maks. disko skersmuo 450 mm - veleno skersmuo 30 mm - hidraulinis spaudimas atlieka disko apsaugos funkciją - disko hidraulinis eiga - maks. pjovimo plotis 400 mm - maks. pjovimo aukštis 130 mm - pagrindinis variklis 3,7 kW - ištraukimo antgalių skersmuo 100 mm, 120 mm - stalo matmenys 670x705 mm - stalo aukštis nuo pagrindo 800 mm - ritininiai stalai 2 vnt. - ritinio dydis 300 mm Stalų matmenys: - išvedimo stalas ilgis/plotis (fiksatorius, matuoklis) 2910x300 mm - padavimo stalas ilgis/plotis 2250x300 mm - įrenginio matmenys ilg./plot./aukšt. 1000x950x1210 mm - bendras svoris 430 kg PRIVALUMAI – 2 ritininiai stalai – hidrauliškai reguliuojama pjūklo galvutė – naudota pjūklas, labai geros būklės Iisdow Rb Rwopfx Acush Kaina be PVM: 18900 PLN Kaina be PVM: 4450 EUR Kaina apskaičiuota pagal 4,25 PLN/EUR kursą (esant reikšmingiems kurso svyravimams kaina gali keistis)

Sąlyga: naudotas, Siūloma: Požeminė atpjovimo pjūklas „Jely“. Pagaminimo metai apie 1996. Požeminė atpjovimo pjūklas veikė puikiai iki gamybos pabaigos. Daugiausiai buvo pjaunama rąstinė mediena, 65 mm, 52 mm storio, be problemų. Įrenginys buvo išdėstytas eilėje su šoniniu diskinio pjūklo staklėmis, kad būtų galima efektyviai atlikti kirtimą ir apipjovimą. Iisdpfx Acew Nyxksush Valdymas suprojektuotas kaip dviejų rankų valdymas. Nuotraukose dangteliai nuimti, kad būtų geriau matomas įrenginio vidus. Įrenginys naudotas pagal savo amžių. Daugiau informacijos – pageidaujant.