Torsten Spin Neu- und Gebrauchtwagenhandel "Autopartner"

Sąlyga: naudotas, Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, bendras plotis: 360 mm, bendras ilgis: 820 mm, bendras aukštis: 500 mm, įvesties srovės tipas: Oro kondicionierius, ruošinio skersmuo (maks.): 25 mm, bendras svoris: 92 kg, įėjimo įtampa: 400 V, This LY300 Short & Length Grinding Machine is pre-owned but has only been used sporadically. The condition is very good; only paint damage and a scratched machine cover indicate the machine’s age. From a safety perspective, the machine is equipped with a cover switch that automatically shuts the machine off when the cover is opened. A restart protection feature prevents unintentional restart. For processing short workpieces, the clamping hand is included with this machine. We can also offer consumables such as cutting discs and cup wheels. Application: Rod-shaped workpieces can be cut to length and end-face ground in a single operation. Ideally suited for the production of ejector pins. The machine features two parallel grinding spindles—one for separating and one for face finishing to final dimension. The desired workpiece length can be precisely set on the scale to an accuracy of 0.01 mm. Workpiece length without clamping hand: 54 - 300 mm Workpiece diameter: Ø1-25 mm Workpiece length with clamping hand (included as accessory): 12.5 - 60 mm Workpiece diameter: Ø1-10 mm Ejector pins with cylindrical head: max. size 6 Max. workpiece stock size before machining: 195 mm Length tolerance: +/-0.01 mm Squareness: +/-0.01 mm Weight: 92 kg Dimensions without scale (W x D x H): 430 x 360 x 500 mm Codpfxjxwp A He Admshf Dimensions with scale (W x D x H): 820 x 360 x 500 mm Height with open cover: 950 mm Cut-off wheel, fibreless: SGA60P6BR1, Ø180x1xØ31.75 mm Cup wheel: PA46, Ø100x50x10xØ20 mm Location: Austria / Vienna Including the following accessories: • 1 pc. cut-off wheel SGA60P6BR1 with flange, mounted • 1 pc. cup wheel PA46 with flange, mounted • 1 pc. dressing diamond, mounted • 2 pcs. Y-face spanner • 1 pc. hex key 6 mm • 1 pc. scale 300 mm • 1 pc. micrometer screw with scale sleeve • 1 pc. lever • 1 pc. operating manual, German Operating procedure: Open prism clamp: move lever in the middle to the right and insert the workpiece Close prism clamp: move lever to the left Cutting: move lever up left Finishing: move lever down left Open prism clamp: move lever to the center and to the right; remove finished workpiece. The grinding wheel can be adjusted and dressed at any time without altering the set dimension.

Sąlyga: paruoštas naudoti (naudotas), Šlifavimo disko skersmuo: 125 mm Veleno apsukos: 4400 aps./min Detalės skersmuo: 0,8 - 25 mm Detalės ilgis: 300 / 600 mm Bendras galios poreikis: 1,1 kW Staklių svoris: apie 135 kg Užimamas plotas: apie 0,7 x 0,5 x 1,2 m Precizinė atpjovimo staklė TAM 25/600 skirta tiksliam matmenų pjovimui ir švelniam medžiagos atskyrimui bei galiniu šlifavimui, ekskuderio kaiščių, ekskuderio įvorių, skylamušių ar panašių ruošinių apdirbimui įrankių ir formų gamyboje. Įranga su greitaeige pjovimo velenu ir lėtaeigiu galinio šlifavimo velenu. Detalės ilgis be atmušos 300 mm, su atmuša 600 mm. Csdsxr Rapepfx Admehf Tai naudotos staklės, todėl parduodame be jokių garantijų. Sandėliuojantis prekybininkas su 1600 m² ekspozicijų sale.

Sąlyga: labai geros būklės (naudotas), Bendras aukštis: 1350 mm Plotis su valdymo spinta: 850 mm Gylis: 1420 mm Variklio galia: 1,5 / 3,0 kW Disko skersmuo: 200 mm Pjovimo diapazonas iki: 40 mm Chedpexp Sg Sjfx Admjf

Sąlyga: naudotas, Gamybos metai: 2018, Maximum diameter: ... mm Minimum diameter: ... mm Maximum cutting length: ... mm Left: Wire Right: Stone Price: €200 net Cedpowhqy Dsfx Admehf +++++ Please note that the machine is currently disassembled and ready for loading. For this reason, a demonstration under power or production of a video is not possible. Furthermore, our listing contains the most representative photos of the best possible quality. Unfortunately, it is not possible to send additional pictures. +++++

Sąlyga: naudotas, Gamybos metai: 2009, Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision, both for standard and custom solutions. Equipment: - Full enclosure - Automatic feed (hydro-pneumatic) - Rapid traverse adjustable via touch panel - Automatic fire extinguishing system Kraft & Bauer FB 703 - Freely programmable length positioning - Siemens Simatic HMI control system - Prepared for connection to central coolant supply Workpiece diameter with bar loader: 3 - 20 mm Workpiece length without bar loader: 3 - 32 mm Workpiece length with bar loader: 3 - 310 mm Workpiece length without bar loader: 1 - 450 mm Grinding spindle speed: 2,000 rpm Weight: approx. 1,700 kg Dimensions (L x W x H): 1,900 x 1,200 x 2,400 mm Colour: grey Csdpewd Ha Sjfx Admshf

Sąlyga: naudotas, Gamybos metai: 2009, Suitable for the automatic cutting and surface grinding of carbide and HSS rods with high precision, for both standard and custom solutions. Equipment: - Full enclosure - Automatic feed (hydro-pneumatic) - Rapid traverse adjustable via touch panel - Automatic fire extinguishing system Kraft & Bauer FB 703 Cedpov Uw Uvefx Admohf - Freely programmable length positioning - Siemens Simatic HMI control system - Preparation for connection to a central coolant system Workpiece diameter with bar feeder: 3 - 20 mm Workpiece length without bar feeder: 3 - 32 mm Workpiece length: 3 - 150 mm Grinding spindle speed: 2000 rpm Weight: approx. 1,700 kg Dimensions (L x W x H): 1900 x 1500 x 2400 mm Colour: grey

Sąlyga: labai geros būklės (naudotas), Precision ejector pin cutting and end face grinding machine Machine features: A precision device enabling semi-automatic ejector pin cutting to length and end face grinding in a single fixture The grinder allows for adjustments during operation The belt tension can be adjusted and controlled automatically (the greater the resistance, the tighter the belt) Ejector pin cutting and end face grinding machine Ejector pin cutting and end face grinding machine, Manufacturer code: 100 Machine specifications: Motor power: 0.735 kW Max. speed: 3,600 rpm Diameter range: ⌀1–25 mm Cedpfx Aovyuw Sodmshf Maximum length: 300 mm (optionally 500 or 600 mm) Length tolerance for ⌀25x300 mm: ±0.01 mm Dimensions (LxWxH): 430x360x500 mm Weight: 109 kg YouTube video link:

Sąlyga: naudotas, Gamybos metai: 2008, Suitable for the automatic cutting and surface grinding of carbide and HSS rods with high precision, for both standard and custom solutions. Cedpfx Adeun Rlwsmjhf Equipment: - Full enclosure - Automatic feed (hydro-pneumatic) - Rapid traverse adjustable via touch panel - Automatic fire extinguishing system Kraft & Bauer FB 703 - Freely programmable length positioning - Siemens Simatic HMI control system - Preparation for connection to a central coolant system Workpiece diameter with bar feeder: 3 - 20 mm Workpiece length without bar feeder: 3 - 32 mm Workpiece length: 3 - 150 mm Grinding spindle speed: 2000 rpm Weight: approx. 1,700 kg Dimensions (L x W x H): 1900 x 1500 x 2400 mm Colour: grey

Sąlyga: naudotas, Gamybos metai: 1986, Grinding wheel diameter 300 mm Table length 0 mm Table width mm Total power requirement 11 kW Chodpfx Adot Hwzvomjf Machine weight approx. t Space requirements approx. m Cut-off machine for hard materials Cut-off machine, hand lever, coolant system, 11 kW

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 6 mėnesiai, bendras plotis: 360 mm, bendras ilgis: 1 020 mm, bendras aukštis: 500 mm, įvesties srovės tipas: Oro kondicionierius, ruošinio skersmuo (maks.): 25 mm, bendras svoris: 92 kg, įėjimo įtampa: 400 V, Clamping, separating, and face grinding in one operation The machine features two parallel grinding spindles: one for cutting-off and one for precision face grinding to final dimension. The desired workpiece length is set to an accuracy of 0.01 mm on the scale. To open the prism clamp: Move the center lever to the right and insert the workpiece. To close the prism clamp: Move the lever to the left. Cutting: Move the left lever upwards. Finishing: Move the left lever downwards. To open the prism clamp: Move the lever to the center and right; finished workpiece can be removed. The grinding wheel can be adjusted and dressed at any time without affecting the pre-set measurement. Equipped with motor protection, cover switch, and restart protection. Operation without clamping handle: The machine is supplied with two stop rulers (300 & 600 mm): Max. finished workpiece length: 300 mm or 600 mm Min. finished workpiece length: 54 mm Workpiece diameter: Ø1-25 mm Operation with clamping handle (not included in accessories): Max. finished workpiece length: 60 mm Min. finished workpiece length: 12.5 mm Workpiece diameter: Ø1-10 mm Ejector with cylindrical head: max. size 6 Max. workpiece oversize before machining: 195 mm Length tolerance: +/- 0.01 mm Chodjid Iymepfx Admof Squareness: +/- 0.01 mm Weight: 92 kg Dimensions without scale (W x D x H): 430 x 360 x 500 mm Dimensions with scale (W x D x H): 1020 x 360 x 500 mm Height with open cover: 950 mm Cutting disc (without fabric): SGA60P6BR1, Ø180x1xØ31.75 mm Cup wheel: PA46, Ø100x50x10xØ20 mm Location: Austria / Vienna Condition: New, in-stock machine, 6-month warranty. Includes the following accessories: • 1 pc. cutting disc SGA60P6BR1 with flange, pre-mounted • 1 pc. cup wheel PA46 with flange, pre-mounted • 1 pc. diamond dresser, pre-mounted • 1 pc. drive belt, pre-mounted • 2 pcs. Y-shape face hole spanner • 1 pc. each Allen key 3 mm, 5 mm, 3/16'' • 1 pc. pin spanner 6 mm • 1 pc. scale 300 mm • 1 pc. scale 600 mm • 1 pc. micrometer screw with scale sleeve • 1 pc. cleaning brush • 1 pc. lever • 1 pc. instruction manual (German) • 1 pc. wooden transport crate

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1992, Precision Cutting-to-Length Machine Make: DEGEN Chsdohfwfaepfx Admsf Model: TAM 25/600 Year of manufacture: 1992 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / Machine no.: 1017 with warranty Geometric acceptance with inspection protocol Accessories: - Coolant system - Operating manual - used, as seen -

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, The Function The TAM 25/600 cuts and sizes ejector pins, ejector sleeves, and punch pins quickly and precisely. Workpieces ranging from 0.5 to 25 mm in diameter, made of tool steel or carbide, can be processed. Simply place the workpiece into the quick-clamping prism, set the desired finished length, and cut and size in one step. An additional clamp is available on request for extremely thin, short, or stepped pins. Your advantages: • User-friendly quick-clamping system • Fast insertion and removal of workpieces • Cutting and sizing in a single operation Cedpfofig I Nsx Admohf • Additional clamp available for thin, short, and stepped pins After cutting, the worktable locks in the end position, the length is measured precisely, and the workpiece is finish-ground to size with integral micrometer feed. Wear on the cup wheel is compensated by adjusting the grinding spindle. Wheel dressing is performed automatically via the integrated diamond dresser. On request, CBN or diamond grinding wheels are available as optional equipment for the TAM 25/600. Your advantages: • Precise positioning of the workpiece via micrometer screw • Integrated diamond dresser for cup wheel • Integrated coolant lubrication system to prevent overheating of the workpiece • Adjustable grinding spindle to ensure the cutting edge of the cup wheel remains at zero position The Precision Drive motor: 1.1 kW Cut-off spindle speed: 11,000 rpm Grinding spindle speed: 4,400 rpm Workpiece diameter: 0.5 – 25 mm Workpiece length (with stop): max. 600 mm Cut-off disc: 125 x 1.0 x 20 mm Grinding wheel: 100 x 50 x 20 mm Footprint: 700 x 500 mm Weight (net): 135 kg The machine is in both technical and optical condition as new. Parts no longer in 100% condition are replaced by us. All bearings and screws have been replaced and all components newly painted or phosphated. Delivery time: 3 months.

Sąlyga: naujas, Short and longitudinal grinding machine Make: HERZOG Model: LY 600 400V version Cedod Idb Ijpfx Admehf Length tolerance: ± 0.01 mm Squareness: ± 0.01 mm Diameter range: 1 – 25 mm Dimensions: 430 x 360 x 500 mm Weight: 87 kg Accessories: - Measuring stop with micrometer screw - Cup grinding wheel and cutting disc - Operating manual

Sąlyga: naudotas, Double grinding pedestal, double bench grinder, pedestal grinder, pedestal grinding machine - Motor power: 0.5 kW Codpfob A Rctox Admshf - Speed: 3200/5200 rpm - Grinding wheels: max. diameter 180 mm - Operating voltage: 380 V - Dimensions: 500/500/H1550 mm - Weight: 170 kg