Mormac Machinery GmbH & Co. KG

Sąlyga: naudotas, Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, obliavimo aukštis: 230 mm, obliavimo plotis: 320 mm, FEM9-32XC / RHINO 800XL Feeler-Serie 9 FEELER – Serie A. Leistungsdaten: (1) Arbeitsbreite: 18–320 mm (2) Arbeitshöhe: 6–160^230 mm (3) Min. Werkstücklänge: 240 mm (4) Vorschubgeschwindigkeit: 7–36 m/min B. Motoren: (1) 1. untere Horizontale-Spindel: 10^20 PS mit Außenlager (2) 2. rechte Vertikal-Spindel: 10^15 PS mit Außenlager (3) 3. linke Vertikal-Spindel: 10^20 PS mit Außenlager (4) 4. obere Horizontale-Spindel: 10^20 PS mit Außenlager (5) 5. untere Horizontale-Spindel: 10^20 PS mit Außenlager (6) 6. rechte Vertikalspindel: 10^15 PS mit Außenlager (7) 7. linke vertikal/horizontale Spindel: 10^15 PS mit Außenlager (8) 8. obere Horizontale-Spindel: 10^20 PS mit Außenlager (9) 9. untere Horizontale-Spindel: 10^20 PS mit Außenlager (10) Vorschubantrieb: 15 PS (mit Frequenzumrichter) (11) Höhenverstellung: 2 PS C. Spindel: (1) Spindeldurchmesser: 50 mm bei 1., 2., 3., 4. und 9. Spindel; 40 mm bei 5., 6., 7. und 8. Spindel (2) Spindeldrehzahl: 6200 U/min (3) Verstellbereich der Vertikalspindeln: 80 mm (4) Verstellbereich der Horizontalspindeln: 35 mm D. Schnittkreise: (1) 1. untere Horizontale-Spindel: 100–180 mm (2) rechte Vertikalspindel: 110–250 mm (3) linke Vertikalspindel: 110–250 mm (4) 1. obere Horizontale-Spindel: 110–250 mm (5) 2. untere Horizontale-Spindel: 110–250 mm (6) rechte Vertikalspindel: 110–250 mm (7) linke Vertikalspindel: 110–250 mm (8) obere Horizontale-Spindel: 110–250 mm (9) untere Horizontale-Spindel: 110–250 mm E. Sonstiges: (1) Absaugstutzendurchmesser: 160 mm (2) Vorschubtisch: 2^2,5 m (3) Vorschubwalzendurchmesser: 140 mm (4) *Mit 50 mm Messerkopf F. Standardausstattung: (1) Digitale Vorschubantrieb-Anzeige DPRLF-40K (2) Automatische Tischschmierung (3) Zentrale Punkt-zu-Punkt-Schmierung (4) Pneumatische Niederhalter an den oberen Spindeln (5) Pneumatische Anschlagleiste an den linken Spindeln (6) CE-Kennzeichnung (7) Motoren: Effizienzklasse IE3 Cajdpfx Asxrla Rjdmoa (8) Bearbeitungsreihenfolge: Unten, Rechts, Links, Oben, Unten, Rechts, Links, Oben, Unten Optionale Ausstattung / Zubehör: OP014-15: Stufenloser Vorschubregler, 15 PS Frequenzumrichter OP001: Pneumatische Steuerung 1. und 2. Vorschubwalze (Höhenverstellung) OP041: Außenlager für 2., 3., 6., 7. Spindel OP017: Digitale Positionsanzeige für 3., 4., 7., 8. Spindel OP042C: Schallschutzkabine, verbesserte Ausführung OP023AE3-15: FEED-Motor, 15 PS (E3) OP023BE3-10-15: Spindelmotor 10^15 PS (Y/A) (E3) OPO08-5: Verlängerungstisch 2,5 m mit Ständer und Anschlag OP023BE3-10-20: Spindelmotor 10^20 PS (YiA) (E3) OP002: Drei Betriebsarten Vorschubwalzen pneumatische Höhenverstellung OPO10-230: Erhöhte Arbeitsbreite 230 mm / 2., 3., 6., 7. Spindel OPO08A: Luftkissentisch 320–400 mm

Sąlyga: naudotas, Pjovimo agregatas Daugiaašmenis pjūklas Cedpsxq S Sdsfx Admeaa Darbinis plotis: 620 mm Pjovimo aukštis: 100 mm Pjūklo diskas: Ø 350 mm Variklio galia: 55 kW

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Pjūklo įvorės DK14 Pjūklo įvorės DK16 Caedpfx Aexq R Rxodmsa

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 860 mm, obliavimo aukštis: 230 mm, Penkiaašė Kupfermuhle Obliavimo aukštis: 2 pusės iki 230 mm, 4 pusės iki 200 mm su papildomu ištraukimo gaubtu ir ašimi. Su standartiniu ištraukimo gaubtu ir ašimi – iki 125 mm aukščio. Apatinė ašis: 15 kW Viršutinė ašis: 22 kW Papildoma apatinė ašis: 11 kW Kairioji ašis: 11 kW Dešinioji ašis: 11 kW Padavimo variklis: 18 kW Apatinė ir viršutinė ašys aprūpintos falcuojančiu įrenginiu (jointer). Pavaros greitis: 20–130 metrų per minutę Caodpfx Adexliccemsa Ankstesnis savininkas mašiną visiškai atnaujino, po to mes ją dvejus metus naudodavome tik retkarčiais.

Sąlyga: paruoštas naudoti (naudotas), obliavimo plotis: 1 350 mm, obliavimo aukštis: 200 mm, Storis obliavimo staklės Gamintojas: REX Tipas: 1350 Storis obliavimo staklės su pastoviu stalu – viršutinė dalis su obliavimo velenu yra reguliuojamo aukščio Obliavimo plotis: 1350 mm Obliavimo aukštis: 10 mm – 200 mm 4 peilių velenas, variklio galia 22 kW Pavaros tiekimas per transportinį kilimą Pavaros variklis 2,2 kW, pavaros greitis apie 2–9 m/min. Storio padėties valdymas per valdymo pultą su skaitmeniniu ekranu Codpfx Aoxguf Sedmoaa su reguliavimo liniuote su hidrauline rankine presa peilių fiksavimui su atsarginiais peiliais Bendras prijungimo galingumas apie 29 kW Svoris apie 3500 kg Matmenys apie 2300 x 1400 x 2000 mm (ilgis x plotis x aukštis) + valdymo pultas apie 1000 x 480 x 1200 mm (ilgis x plotis x aukštis) Transporto matmenys apie 3200 x 2100 x 2300 mm (ilgis x plotis x aukštis)

Sąlyga: geras (naudotas), Gamybos metai: 1975, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 860 mm, obliavimo aukštis: 310 mm, darbinis plotis: 860 mm, darbinio aukščio: 750 mm, drožlių pašalinimas: 20 mm, sukimosi greitis (maks.): 4 200 aps./min, obliavimo peilių skaičius: 4, sunki storio obliavimo staklės, labai tinka statybinei medienai ir pan., pastovi stalo aukštis, stabilus ritininis konvejeris su pavara įvado zonoje, stabilus ritininis konvejeris be pavaros išvado zonoje Caedpfsxfl A Sox Admea

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Staklinis oblius su pastoviu stalu Darbo plotis 1350 mm Padavimas per transportinę juostą 4 peilių velenas su įstrižai stovinčiais peiliais traukiančiam pjūviui Csdpfx Adexfb N Usmjaa Storio reguliavimas per pozicionavimo valdymą su skaitmeniniu ekranu

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Two-Sided Wide Planer Maximum planing width: 400 mm Maximum planing height: 200 mm Heavy-duty cardan feed Feed belt with spike profile ensures precision feed accuracy, especially with warped or bent timber. Electronic height adjustment Spiral cutter heads (top and bottom) Cajdpfxexc D Tdo Admja Latest IE-3 motors Braked motors and feed CE certified

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Double-sided wide planing machine Cjdpfxexc D S He Admsaa Maximum planing width: 610 mm Maximum planing height: 200 mm Heavy-duty cardan feed Feed belt with spike profile enables precision feeding accuracy, especially with warped or bent wood. Electronic height adjustment Spiral cutterheads top and bottom Latest IE-3 energy-efficient motors Braked motors and feed unit CE compliant

Sąlyga: naudotas, Savaiminis svoris: 6 000 kg Matmenys (I x P x A): 340 x 210 x 190 cm Kaina: pagal užklausą Cedpfx Asxbf Iajdmoaa - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Maks. darbinis plotis: 860 - Transportavimo matmenys: 3400 mm x 2100 mm x 1900 mm (i x p x a) - Transportavimo svoris [kg]: 6000 kg - Transportavimo pakuotės [vnt.]: 3 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir keitimas galimi bet kuriuo metu visiems pramonės sektoriaus įrenginiams Yorick Diebels

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, darbinis plotis: 850 mm, Four-sided planer Manufacturer: Kupfermühle Model: VUIN Max. working width: approx. 850 mm Max. planing height: approx. 200 mm Cutterblock with 4 knives With electronic height adjustment 1 horizontal spindle from above, 7.5 kW Caedpow Hr Nksfx Admja 1 horizontal spindle from below, 7.5 kW 1 vertical spindle from the left, 4 kW 1 vertical spindle from the right, 4 kW Feed motor: 3 kW

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Front-mounted aggregate Cedewum Nnopfx Admjaa upper right and left suitable for various planing machines

Sąlyga: naudotas, Svoris be krovinio: 1.500 kg Matmenys (I x P x A): 150 x 140 x 150 cm Dvipusis obliavimo staklės MIC AM2 Maksimalus darbinis plotis: 510 mm Voleliai aukštyn ir žemyn 2 peiliai kiekvienai obliavimo galvai - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: 1652.75 - Transportavimo matmenys: 1500 mm x 1400 mm x 1500 mm (i x p x a) - Transportavimo svoris [kg]: 1500 kg - Transporto paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir senos technikos priėmimas galimi bet kuriuo metu iš pramonės sektoriaus Csdpfewnhhxex Admjaa Yorick Diebels

Sąlyga: naudotas, Dvipusis obliavimo staklės Fischer HMB-85 Didžiausias darbinis plotis: 850 mm Didžiausias darbinis aukštis: 240 mm Cajdpfx Aownhhrodmea Viršuje ir apačioje padavimo volai 1 ašis; apačioje; grioveliuotas velenas, 5,5 kW variklis 2 ašis; apačioje; lygus velenas, 15 kW 3 ašis; viršuje; lygus velenas, 15 kW Su grioveliuotu stalu! - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Variklis su stabdžiu: Ne Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir keitimas visada galimi visoms pramonės sritims skirtoms prekėms. Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 1972, Tuščiasvoris: 3 000 kg Matmenys (I x P x A): 180 x 170 x 200 cm Keturių pusių obliavimo staklės Küpfermühle 600 Obliavimo plotis: 600 mm Casdpswnhbxofx Admoa Obliavimo aukštis: 190 mm Kampinis apatinis peilių velenas 9 kW Viršutinis nuožulnus peilių velenas 11 kW Dešinė vertikali ašis 4 kW Kairė vertikali ašis 5,5 kW Matmenys apie 1800 x 2000 x 1700 mm (I x P x A), svoris 3000 kg - Gamybos metai: 1972 - Dokumentacija: nėra - CE sertifikatas: nėra - Serijos numeris: 9552 - Transportavimo matmenys: 1800 mm x 1700 mm x 2000 mm (I x P x A) - Transportavimo svoris [kg]: 3000 kg Finansinė informacija PVM: nurodyta kaina be PVM PVM/Skirtuminis apmokestinimas: PVM atskaitomas verslui Pristatymas ir išpirkimas galimi bet kuriuo metu visam pramonės sektoriui Yorick Diebels

Sąlyga: naudotas, Gamybos metai: 1996, Kaina: pagal užklausimą Dvipusis oblius REX HOMS 630 Serijos numeris: 16831 380 V, 102,6 A, 67,5 AG Cjdpfx Aswng Ikodmsaa Įrengta su 3 obliavimo velenais 1. apatinis 15 kW 2. apatinis 11 kW 3. viršutinis daugiau nei 18,5 kW Maksimali obliavimo plotis: 630 mm Min.-maks. obliavimo aukštis: 10–310 mm Maks. drožlių pašalinimas viršutiniu velenu: 15 mm Maks. drožlių pašalinimas apatiniu velenu: 10 mm - Pagaminimo metai: 1996 - Dokumentacija prieinama: Ne - CE sertifikatas: Ne Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir keitimas galimi bet kuriuo metu dėl bet kokios pramoninės įrangos Yorick Diebels

Sąlyga: paruoštas naudoti (naudotas), Plati obliavimo staklės pastovus stalas Maks. obliavimo plotis: 605 mm Obliavimo aukštis dviem pusėm: 200 mm Obliavimo aukštis keturiomis pusėm: 170 mm Obliavimo velenai su 6 peiliais Cajdpfx Aowg S Tvedmja Iki 24 m/min padavimo greičiu pakanka 3 peilių 3 peiliai dirba, 3 aštrūs peiliai yra atsargoje Papildomas agregatas: 5-asis horizontalus darbo velenas, 11 kW Ištraukimo agregatas, veleno plotis 350 mm Papildomai: Priešobliavimas prie staklių įėjimo

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 7503 TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (two-sided): 200 mm - Max planing height (four-sided): 100 mm Top side: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed drive shaft - Pawls - Pressure unit - 2 toothed drive shafts - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW Casdpfx Adevah S Nomea - Pressure unit - Smooth metal feed roller - Pressure unit - Profiling shaft, 7.5 kW - Pressure unit - Rubber feed roller Bottom side: - Planing shaft, spindle diameter 35 mm, shaft length 130 mm, 2.2 kW - 2 guide bars - Infeed table - Smooth drive shaft - 610 mm planing shaft, 4-knife (currently equipped with 2 knives), 7.5 kW - 2 smooth drive shafts - Split metal sliding roller - Side pressure Rear side: - Side spindles with 2 pressure units - 1) Right vertical spindle 95 mm, 4 kW - 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Extraction ports diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight approx. 3500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing logs, flooring, etc. – Additional profiling shaft and planing shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition Net price: 66,900 PLN Net price: 15,930 EUR (based on 4.2 EUR exchange rate) (Prices may vary with exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), Catalog number 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - toothed feed roller - return pawls - 2 pressure rollers - toothed feed roller - pressure roller - planing shaft 610 mm, 4-knife, 7.5 kW - pressure rollers - smooth feed roller From below: - guide rail - adjustable infeed table with smooth, split sliding roller - planing shaft 610 mm, 4-knife, 5.5 kW - 2 smooth sliding feed rollers - side pressure roller From the rear: - side spindles + 2 pressure rollers: 1) right vertical 5.5 kW 2) left vertical 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) additional horizontal spindle 160 mm, adjustable up/down, left/right, and angle, approx. 4 kW - Option to plane with the additional spindle from above/below/side - Spindle diameter 35 mm - Adjustable rollers in the lower table - 2 feed speed levels - Feed motor 2.2 kW - Extraction port diameter 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Weight approx. 3000 kg ADVANTAGES Cjdpfx Aerq Db Djdmsaa - Wide planer for wet and dry wood - Ideal for processing beams, flooring, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Cutter heads included - Manufactured by German brand KUPFERMUHLE - Used planer, very good condition Original photos Net price: 58,900 PLN Net price: 14,020 EUR (exchange rate: 4.2 EUR) (Prices are subject to change due to exchange rate fluctuations)

Sąlyga: paruoštas naudoti (naudotas), Special power unit 18.5 kW Up-down controlled sawing milling grooving additional accessories and spare parts available in the jöma shop Cedpfx Aoqwdwwedmsaa

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Cajdeqlck Njpfx Admea Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Caedpfx Adoqlckpsmsa Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Gamybos metai: 1994, Sąlyga: labai geros būklės (naudotas), Four-sided planer, 8-head HARBS. Long infeed table: 3 meters. Machine weight: 5,500 kg. Cardan drive. Head configuration: bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal, top horizontal. Motors: 5.5 kW and 7.5 kW. Planing width: 230 mm. Planing height: 160 mm. Casdpfel Dw Nxsx Admja

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Steton four-side planer with 5 heads. Cajdpfx Aei Apuhodmsa Steton four-side planer with 5 heads. The machine has been serviced and requires no additional investment. Technical data: - Maximum width of workpiece: 23 cm - Maximum height: 13 cm - Spindle diameter: 40 mm - 1 – Bottom horizontal: 23 cm - 2 – Right vertical: 13 cm - 3 – Left vertical: 13 cm - 4 – Top horizontal: 23 cm - 5 – Universal noise-insulated enclosure, 360 degrees - Electrically adjustable planing thickness - Two feed speeds

Sąlyga: naudotas, Transversal shifting subframe for planing machine Cjdpfjimz Egsx Admoaa Enables the planing machine to be moved laterally so that the cutter heads can be used across their entire length while maintaining the zero line. REX planing machine transverse adjustment Dimensions: Length 2850 mm / Width 2600 mm / Height 250 mm + support 215 mm