Daedalean AG

Būklė: labai geros būklės (naudotas), BAT magnio vibracijos bandymo įrenginio kubas Gamintojas: BAT Įrangos tipas: vibracijos bandymo įrenginio kubas / tvirtinimo kubas Medžiaga: magnis Parduodamas aukštos kokybės naudotas magnio vibracijos bandymo įrenginio kubas, skirtas vibracijos ir svyravimų bandymo įrangai. Šis tvirtinimo kubas naudojamas kaip universalus adapteris ir tvirtinimo įtaisas, skirtas bandiniams, įtaisams ir matavimo sistemoms tvirtinti elektrodinaminėse vibracijos bandymo įrangose (vibratoriuose). Dėl tiksliai apdirbtų tvirtinimo paviršių su sriegiu visose pusėse galima lanksčiai įrengti įvairias bandymo sistemas. Dkedpfezkhxtex Aitsp Magnio konstrukcija užtikrina didelį standumą, kartu išlaikant mažą svorį, todėl ypač tinka dinaminėms svyravimų ir aplinkos sąlygų bandymams. Techniniai duomenys Gamintojas: BAT Tipas: vibracijos bandymo įrenginio kubas / tvirtinimo kubas Medžiaga: magnis Matmenys: apytiksliai 400 × 400 × 400 mm Sriegio dydis: M8 Sriegio tinklelis visose pusėse Tiksliai apdirbti tvirtinimo paviršiai Keli dideli kiauryminiai angos, skirti tvirtinti Įranga Patvari lengva magnio konstrukcija Tiksliai apdirbti tvirtinimo paviršiai Daugiašalis sriegio tinklelis Didelės kampinės kiauryminės angos Pramoninis variantas Naudojimo sritys Elektrodinaminės vibracijos bandymo įrangos Svyravimų bandymai Aplinkos sąlygų bandymo technika Automobilių pramonės bandymo technika Oro ir kosmoso pramonė Elektronikos bandymai Bandymų ir plėtros laboratorijos Kokybės užtikrinimas Transportavimo duomenys Matmenys: apytiksliai 400 × 400 × 400 mm Svoris: apytiksliai 35 kg Būklė Naudotas Vizualinė būklė, kaip matoma nuotraukose. Pastebimi normalūs, dėl amžiaus susidarantys dėvėjimosi požymiai. Komplektacija Magnio vibracijos bandymo įrenginio kubas Komplektacija, kaip matoma nuotraukose Siuntimas transporto įmone arba atsiėmimas vietoje. Pasiliekame teisę atlikti pakeitimus, klaidų nepašalinti ir prekės gali būti parduotos anksčiau.

Būklė: labai geros būklės (naudotas), BAT magnio vibruojančio įrenginio tvirtinimo kubas su adapterio plokšte Gamintojas: BAT Dksdpfxezkhv So Aitep Įrenginio tipas: Vibruojančio įrenginio tvirtinimo kubas / tvirtinimo kubas Medžiaga: magnis Konstrukcija: su šonine adapterio plokšte Parduodamas aukštos kokybės naudotas magnio tvirtinimo kubas, skirtas vibracijos ir svyravimo bandymų stendams. Šis tvirtinimo kubas naudojamas kaip universali tvirtinimo ir adapterio įranga, skirta tvirtinti bandomuosius objektus, įrenginius ir mazgus elektrodinaminiuose vibracijos bandymų stenduose (vibruojančiuose įrenginiuose). Tiksliai apdirbti tvirtinimo paviršiai, kuriuose yra daugybė sriegių skylių, leidžia lanksčiai sukonstruoti įvairiausius bandymų įrenginius. Šoninė adapterio plokštė papildomai išplečia panaudojimo galimybes. Techniniai duomenys Gamintojas: BAT Tipas: Vibruojančio įrenginio tvirtinimo kubas / tvirtinimo kubas Medžiaga: magnis Matmenys: apytiksliai 330 × 330 × 330 mm Tiksliai apdirbti tvirtinimo paviršiai Sriegių tinklelis keliose pusėse Didelės kiauryminės angos kampuose Šoninė adapterio plokštė iš aliuminio Įranga Lengva magnio konstrukcija Tiksliai apdirbti tvirtinimo paviršiai Daugiapus sriegių tinklelis Adapterio plokštė iš aliuminio Pramoninis variantas Naudojimo sritys Elektrodinaminių vibracijos bandymų stendai Svyravimo bandymai Aplinkos imitavimas Automobilių pramonės bandymų technika Oro ir kosmoso pramonė Elektronikos bandymai Bandymų ir tyrimų laboratorijos Kokybės kontrolė Transportavimo duomenys Matmenys: apytiksliai 330 × 330 × 330 mm Svoris: apytiksliai 30–40 kg Būklė Naudotas Vizualinė būklė atitinka nuotraukas. Pastebimi normalūs, su amžiumi susiję naudojimo ženklai. Komplektacija Magnio vibruojančio įrenginio tvirtinimo kubas Adapterio plokštė Komplektacija atitinka nuotraukas Siuntimas kurjeriu arba atsiėmimas vietoje galimas. Pasiliekame teisę atlikti pakeitimus, klaidų korekcijas ir prekės gali būti parduota per trumpą laiką.

Būklė: labai geros būklės (naudotas), BAT magnio tvirtinimo įtaiso kubas Dkedpfx Aezkgqnjitop Gamintojas: BAT Įrenginio tipas: magnio tvirtinimo įtaiso kubas / tvirtinimo kubas Medžiaga: magnis Sriegio dydis: M8 Parduodamas aukštos kokybės naudotas magnio tvirtinimo kubas, skirtas vibracijos ir svyravimo bandymų įrenginiams. Šis tvirtinimo kubas naudojamas lanksčiai tvirtinti bandomuosius objektus, įrenginius ir adapterius prie elektrodinaminių vibratorių. Dėl daugybės M8 sriegių skylių keliose pusėse galima realizuoti įvairius bandymų konfigūracijas. Magnio konstrukcija užtikrina didelį standumą, kartu išlaikant mažą svorį, todėl puikiai tinka naudoti aplinkos, svyravimo ir vibracijos bandymuose. Techniniai duomenys Matmenys: apytiksliai 300 × 300 × 300 mm Medžiaga: magnis Sriegio dydis: M8 Sriegių skylės keliose pusėse 2 tvirtinimo kilpos transportavimui Vidinis, svoriu optimizuotas dizainas Naudojimo sritys Elektrodinaminiai vibracijos bandymų įrenginiai Svyravimo bandymų įrenginiai Aplinkos bandymo įranga Automobilių pramonė Oro ir kosmoso pramonė Elektronikos bandymai Kokybės užtikrinimas Tyrimai ir plėtra Bandymų laboratorijos Įranga Patvari magnio konstrukcija Tiksliai apdirbtos tvirtinimo paviršiai Sriegių išdėstymas keliose pusėse Transportavimo kilpos Pramoninė versija Transportavimo duomenys Matmenys: apytiksliai 300 × 300 × 300 mm Svoris: apytiksliai 30–40 kg Būklė Naudotas Paimtas iš pramoninės aplinkos. Yra normalūs, dėl naudojimo susidarantys dėvėjimosi ženklai. Vizualinė būklė, kaip nuotraukose. Komplektacija BAT magnio tvirtinimo įtaiso kubas Komplektacija, kaip nuotraukose Siuntimas per transporto įmonę arba galimybė atsiimti patiems. Pasiliekame teisę keisti, taisyti klaidas ir prekiauti iš anksto.

Gamybos metai: 2011, būklė: naudotas, „LECO TC-400“ – tai aukštos tikslumo laboratorinis prietaisas, skirtas deguonies ir azoto kiekiui nustatyti kietuose mėginiuose. Ši sistema dažniausiai naudojama metalurgijoje, medžiagų tyrimuose, moksliniuose tyrimuose ir kokybės kontrolėje, užtikrinant patikimą elementų analizę įvairioms neorganinėms medžiagoms. „TC-400“ veikia kaip inertinių dujų lydymo analizatorius (deguonies/azoto analizė) ir leidžia: • Nustatyti deguonies (O) ir azoto (N) kiekį kietuose mėginiuose. • Analizuoti metalus, lydinius, keramiką ir miltelius. • Atlikti itin tikslius matavimus lydant mėginius grafitiniame katile. • Automatiškai įkelti mėginius (priklausomai nuo konfigūracijos). • Apdoroti duomenis naudojant integruotą programinę įrangą. • Gauti pakartotinai tikslius rezultatus, skirtus kokybės ir proceso kontrolei. • Dokumentuoti ir valdyti duomenis naudojant „TCWin Analysis“ programinę įrangą (versija 4.24). Dkedpfx Aozkaa Ajitjp Dėl patikimos „LECO“ technologijos, „TC-400“ užtikrina stabilų veikimą, didelį matavimo tikslumą ir patikrintą analitinę platformą, skirtą sudėtingoms reikmėms, naudojamoms moksliniuose tyrimuose ir pramonėje.

Būklė: labai geros būklės (naudotas), Parduodamas „Vötsch VT 7004“ klimatinis bandymo korpusas, skirtas tiksliems tyrimams ir bandymams kontroliuojamomis temperatūros sąlygomis. Ši įranga naudojama laboratorijose, kokybės kontrolės skyriuose, medžiagų tyrimuose, elektronikos ir automobilių pramonėje. Korpusas yra komplektuojamas su elektroniniu temperatūros valdikliu, efektyvia aušinimo sistema ir priverčiamo oro cirkuliacijos sistema, užtikrinančia vienodą temperatūros pasiskirstymą visame darbo kampe. Korpuso vidus pagamintas iš nerūdijančio plieno, todėl jį lengva valyti ir užtikrinamas didelis patvarumas. Techniniai duomenys: Gamintojas: „Vötsch Industrietechnik GmbH“ Modelis: VT 7004 Dkodpszi U Tnefx Aitjp Pagaminimo metai: 2000 Įrenginio numeris: 58566024350010 Maitinimas: 230 V AC, 50 Hz Vardinė galia: 2,0 kW Vardinė srovė: 10 A Šaltnešis: R404A – 0,7 kg R23 – 0,22 kg Maksimalus darbinis slėgis: 25 bar Vidus: nerūdijantis plienas Elektroninis temperatūros valdiklis Priverčiamo oro cirkuliacija Durys su silikoniniu sandarikliu Apšvietimas ir techninės priežiūros angos korpuse Kompaktiška konstrukcija Būklė: Naudota įranga. Vizualiai geros būklės. Korpusas švarus, pilnas. Parduodamas tokios būklės, kokia matoma nuotraukose.

Būklė: labai geros būklės (naudotas), Parduodama profesionali Vötsch VTL 7010 klimatinė kamera, skirta atlikti temperatūros testus ir modeliuoti aplinkos sąlygas. Šis įrenginys naudojamas laboratorijose, kokybės kontrolės skyriuose, mokslinių tyrimų ir plėtros centruose, taip pat testuojant elektronines, automobilių ir mechanines dalis. Kamera yra veikianti – jutiklinis ekranas tinkamai įsijungia, rodo pagrindinį meniu ir dabartinę darbinę temperatūrą, kaip matyti nuotraukose. Techniniai duomenys: Gamintojas: Vötsch Industrietechnik GmbH Modelis: VTL 7010 Pagaminimo metai: 2010 Temperatūros diapazonas: nuo -70 °C iki +180 °C Šildymo/aušinimo greitis: apie 3,5 K/min. Šaldymo skystis: R404A – 0,8 kg R23 – 0,2 kg Maitinimas: 230 V AC, 50 Hz Vardinė galia: 3,5 kW Vardinė srovė: 15,2 A Darbinis slėgis: 8 bar Dodpfxszi T Nhs Aitjkp Valdymas spalvotu jutikliniu ekranu Darbinė kamera pagaminta iš nerūdijančio plieno Durelės su apžvalgos langu Reguliuojami vidiniai lentynų aukščiai CE žymėjimas Paskirtis Įrenginys puikiai tinka: temperatūros testams, medžiagų tyrimams, elektronikos ir komponentų testavimui, patvarumo tyrimams, kokybės kontrolei, moksliniams tyrimams ir plėtrai. Būklė naudota, veikianti, valdymo skydelis veikia tinkamai, vidaus kamera yra švari ir prižiūrėta, normalūs naudojimo ženklai, parduodama tokios būklės, kokia matoma nuotraukose. Komplekte: Vötsch VTL 7010 klimatinė kamera, 2 perforuotos lentynos, įmontuotas valdymo skydelis.

Būklė: naudotas, Techninės specifikacijos: Traukos jėga: 250 kN Valdymo sistema: SCHENCK HYDROPULS PSB Servo hidraulinė lapinės spyruoklės bandymo mašina su skaitmenine elektronika, 65 serija, skirta lapinių spyruoklių, skirtų komerciniams transporto priemoniams, geležinkelio transporto priemonėms arba pramoniniam naudojimui, bandymams. Naudojant hidraulinį cilindrą, pritaikomos nustatytos apkrovos, o kartu matuojama jėga, poslinkis ir, prireikus, deformacija. Dedpfozi R R Asx Aitokp • Statinė spyruoklės charakteristika (jėga–poslinkis) • Atsparumo nuovargiui ir nuovargio bandymai • Apkrovos ciklų bandymai • Kokybės kontrolė gamybos metu Tipiniai bandymai: • Atsparumas cikliniam apkrovimui (milijonai apkrovos ciklų) • Jėgos ir poslinkio charakteristikos • Tarnavimo trukmės bandymai • Tempimo ir suspaudimo bandymai

Būklė: labai geros būklės (naudotas), Weiss Model: WK 5/55-120 Weiss Technik Climate Test Chamber WK 5/55-120 -55°C to +120°C / 5 m³ | Year: 2016 The unit is water-cooled, high-performance, and designed for professional continuous operation. For sale is a professional climate test chamber from Weiss Technik, model WK 5/55-120, manufactured in 2016. This system is ideally suited for temperature, climate, and material testing in industrial, research, and development environments. With a temperature range from -55°C to +120°C and a humidity range of 10–95% RH, the test chamber covers a wide range of applications. The spacious test area of approx. 5 m³ enables testing of larger components or assemblies. Technical Highlights: - Temperature range: -55°C to +120°C - Climate range: 10–95% RH - Heating/cooling rate: approx. 1.5 K/min - Water cooling required Technical Data: - Manufacturer: Weiss Technik GmbH - Model: WK 5/55-120 - Year of manufacture: 2016 Dimensions / Volume - Test chamber volume: approx. 5 m³ - External dimensions (W×D×H): approx. 1900 × 4410 × 2621 mm - Internal dimensions (W×D×H): approx. 1600 × 1700 × 2000 mm Temperature range -55°C to +120°C Heating/cooling rate: approx. 1.5 K/min Climate range: 10–95% RH Dew point range: +4°C to +85°C Electrical Data: - Power supply: 3/N/PE AC 400V ±10% 50Hz - Rated power: approx. 47 kW (depending on configuration) - Rated current: 71 A - Customer-side fuse protection: 63 A Cooling Water - Water cooling required - Maximum cooling water consumption: approx. 7 m³/h - Inlet temperature: approx. 20°C - Noise level: approx. 76 dB(A) - Weight: approx. 4,600 kg Scope of delivery: - Weiss Technik WK 5/55-120 climate test chamber - Control unit Dkedpoziztujfx Aitep - Operating manual (German) - Nameplate & documentation Condition: used Scope of delivery: (see picture) (Technical data subject to change and possible errors. All information subject to confirmation!)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests on lithium-ion energy storage systems. Special Added Value: The unit is constructed to safely detect, monitor, and securely contain critical battery events up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) - Conduct aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Temperature endurance and temperature cycling tests - Testing unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test laboratories & safety testing - Automotive / e-mobility / energy storage The P Plus package transforms the KB 720 into a genuine battery safety test chamber: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Fire detector with visual & audible alarm - Mechanical double-door locking (safe containment) - Spark protection in the interior - Exhaust vent with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual activation of the suppression system - Access ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, without explosion or uncontrolled spread. Not an abuse or destruction test device, but a reliable, standard-compliant test chamber for actual operating and fault scenarios. Technical key data: - Temperature range: –10 °C to +100 °C - Chamber volume: approx. 698 liters - Trays: 4 × stainless steel - Max. load per tray: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm Dsdpfx Aiezizr Rjtokp - Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? - True battery safety test chamber - Suitable for EUCAR hazard level 5 - Integrated CO₂ fire suppression system - Large chamber (≈700 l) - High market & resale attractiveness - Weight: approx. 285–300 kg - Condition: used - Scope of delivery: (see image) (Subject to technical modifications and errors in data!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional materials testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been properly maintained. Dksdpfozizrkjx Aitjp General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated force: 10 kN Test type: Tensile and compression testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of nominal value Travel resolution: 0.038 µm Positioning repeatability:

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package "P Plus". This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety tests on lithium-ion energy storage systems. Special Added Value: The unit is constructed to safely detect, monitor, and securely contain critical battery events up to EUCAR hazard level 5 (fire/flames, no explosion). What can the device do specifically? (Point 2 – Performance & Application) - Conduct aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Temperature endurance and temperature cycling tests - Testing unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe execution of tests under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test laboratories & safety testing - Automotive / e-mobility / energy storage The P Plus package transforms the KB 720 into a genuine battery safety test chamber: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Fire detector with visual & audible alarm - Mechanical double-door locking (safe containment) - Spark protection in the interior - Exhaust vent with reversible overpressure flap - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual activation of the suppression system - Access ports for charging and measuring cables Result: The unit is designed for testing lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, without explosion or uncontrolled spread. Not an abuse or destruction test device, but a reliable, standard-compliant test chamber for actual operating and fault scenarios. Technical key data: - Temperature range: –10 °C to +100 °C - Chamber volume: approx. 698 liters - Trays: 4 × stainless steel - Max. load per tray: 45 kg - Max. total load: 100 kg Electrical data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A Dedoziznfepfx Aitekp - Refrigerant: R134a - Protection class: IP 20 Dimensions & weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In short – why is this device special? - True battery safety test chamber - Suitable for EUCAR hazard level 5 - Integrated CO₂ fire suppression system - Large chamber (≈700 l) - High market & resale attractiveness - Weight: approx. 285–300 kg - Condition: used - Scope of delivery: (see image) (Subject to technical modifications and errors in data!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), CTS Type: C-40/350 Climate Test Chamber, Air-Cooled For sale is a professional CTS climate test chamber, model C-40/350. This unit is engineered for demanding environmental simulation in industrial applications, making it ideal for material testing, electronics, automotive, aerospace, and research purposes. Temperature Testing: Temperature range: -40°C to +180°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 3.5 K/min Cooling: 4 K/min Heat compensation: Approx. 3500 W at +20°C Approx. 2000 W at -20°C Climate Testing: Temperature range: +10°C to +90°C Humidity range: 10% to 95% relative humidity Dew point range: +5°C to 78°C Temperature deviation: ≤ 1.0 K over time Humidity deviation: ≤ ±3.0% rel. humidity over time These technical specifications refer to an ambient temperature of +25°C, rated voltage 400V, without test load, without heat compensation, and without additional equipment. Options may affect performance. Technical design: Refrigeration unit: Air-cooled, low-noise, fully hermetic, continuously variable capacity control by electronic monitoring and control system, environmentally friendly refrigerant R404A Test chamber: Floor load capacity 150 kg/m² Grid shelf: Stainless steel, support surface 620 x 600 mm Maximum load per shelf: 35 kg Maximum total load (full shelf configuration): 100 kg Control system: Dksdpjzizmzjfx Aitop 32-bit controller LCD control panel Digital display of set and actual values Numeric input of set values Error messages in plain text RS 232 interface Ethernet interface Free switching channels for external test item control Dimensions: Test volume: 350 liters Internal dimensions: height 750 mm × width 650 mm × depth 720 mm External dimensions: height 1800 mm × width 920 mm × depth 1670 mm Operating data: Electrical connection: 400V 3/N, 50 Hz Rated power: 7.1 kW Rated current: 11.5 A Protection class: IP 54 Sound pressure level: -

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climate test chamber allows functionality or material properties of a test item to be evaluated under varying temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the specimen. The air handling section is located at the rear of the chamber interior. The aggregates are housed in a separate frame at the back of the device and are easily accessible. The control system is located in a separate switchgear cabinet, with the control panel mounted on the cabinet door. For dehumidification, the chamber is equipped with a self-regenerating compressed air dryer. The test space can also be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3% r.H. over time Technical data based on an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Interior (test space/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Interior dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm Exterior dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power consumption: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Execution: - Cooling unit: water-cooled, low noise, semi-hermetic - Infinitely variable power adjustment via electronic monitoring and control system - Uses environmentally-friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping via freight forwarding available – cost & arrangements on request - Scope of delivery: (see picture) Dedpfozizmuex Aitekp (Subject to modifications and errors in technical data and information!) For further questions, feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) Dkjdpszizmnofx Aitep - Rated current: 86.0 A - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: labai geros būklės (naudotas), CTS CW-60/5.5 – Climate Test Chamber, Water-Cooled The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables the functional or material properties of a test object to be tested under the influence of temperature and humidity. Efficient air circulation with a high recirculation volume ensures effective climatic transfer to the specimens. The air handling unit is located at the rear of the chamber interior. The refrigeration units are positioned behind the machine in a separate frame and are easily accessible. The controller is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test space can be purged with fresh air via a blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Linear temperature change rate with test specimen and radiant heat, measured in the supply air - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ± 0.5 K over time - Humidity deviation: ±1 – ±3% r.H. over time The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, no radiant heat, and without additional accessories. Dimensions: Internal Dimensions (Test / Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2300 mm; Width: 1600 mm; Depth: 1550 mm External Dimensions: - Height: 2800 mm; Width: 2250 mm; Depth: 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 outlets) - Rated current: 86.0 A Dkjdpfszizmbsx Aitsp - Protection class IP 54 Technical Features: Refrigeration Unit - Water-cooled, low noise, semi-hermetic design - Infinitely variable power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Notes Viewing by appointment possible (46325 Borken) Shipping via forwarding agent possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to changes and errors in the technical data, specifications subject to confirmation!) Please feel free to contact us by phone for further questions.

Būklė: naudotas, Espec Model: TSD-100 100-liter usable chamber for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Temperature range cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hours counter Mobile design Dkjdpfx Aiezizl Rstop 2 stainless steel specimen baskets Cable entry Ø 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. Power consumption: 32A Condition: used Weight: 1100 kg Important information for your peace of mind as a buyer! The following points are carried out in advance on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New filling with legally compliant refrigerants if required 3. Leak test with certificate 4. After successful inspection, each chamber undergoes a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to alterations and errors!) For further questions, please do not hesitate to contact us by phone.

Būklė: labai geros būklės (naudotas), Type: VCS 7034-5 Climatic Test Chamber, Water-Cooled Test chamber volume: 335 litres Performance Data for Temperature Testing: Djdozizl Dopfx Aitokp Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Rate of change: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climatic Testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm 1 port, Ø approx. 50 mm, left side 2 ports, Ø approx. 125 mm, left side 1 port, Ø approx. 125 mm, right side Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R404A / R-23 For your safety as a buyer, please note the following: The following steps are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Būklė: naudotas, Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K with MAYTEC High Temperature Furnace HTO-09/2 1200°C-SG and Load Cell TC-LC100KN.G02 (100 kN) The testXpert III 1.6 software serves as the control and evaluation software for ZwickRoell materials testing machines. It enables standards-compliant testing procedures, logs measurement data, and supports traceability, etc. Windows 11 Compatibility: The ZwickRoell testing software (particularly testXpert III) supports current Windows platforms, making its use with Windows 11 possible and intended. Item Description: For sale is a high-quality materials testing system, consisting of: - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) This system comes from a laboratory setting and was used for mechanical material testing at ambient and high temperatures. All units are pre-owned, well maintained, and fully functional. Technical Highlights – Zwick/Roell Testing Machine Type: BTC-FR100SW.A4K Max. Test Force: 100 kN AC Drive 4 kW, widened floor-standing version (W) Supply: 400 V / 50–60 Hz / 3Ph+N+PE, Current draw 9 A Working Area: Height 1,765 mm, Width 1,030 mm Crosshead Speed: 0.0005 – 1000 mm/min Positioning Accuracy: < 2 µm Noise Level: ≤ 70 dB(A) Max. Test Force (Fnom): 100 kN Drive: AC Drive 4 kW (widened floor-standing version, W) Test Force Range: 0.4–100% (Class 1) / 2–100% (Class 0.5) according to ISO 7500/1 Supply Voltage: 400 V / 50–60 Hz / 3Ph+N+PE Current Draw: 9 A Power Consumption: 5.0 kVA Dkodpfx Aiezizlqetep Load Frame Height: approx. 2.32 m Working Area Height: 1,765 mm Working Area Width: 1,030 mm Machine Weight: approx. 1,820 kg Crosshead Speed: 0.0005 – 1000 mm/min Positioning Accuracy: < 2 µm Noise Level: ≤ 70 dB(A) Load Cell: TC-LC100KN.G02 (IP67, GTM, 100 kN, 20 kg) Technical Highlights – MAYTEC High Temperature Furnace Max. Temperature: 1200°C 2 separately controllable heating zones Power: 0.66 kW / 22 A per zone Supply: 30 V / 50 Hz per zone Ideal for high-temperature testing in combination with the Zwick testing machine Load Cell TC-LC100KN.G02 Nominal Force: 100 kN Protection Class: IP67 Precise force measurement according to ISO 7500/1 Weight: 20 kg, GTM design Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (see photos) - Zwick/Roell Materials Testing Machine BTC-FR100SW.A4K - MAYTEC High Temperature Furnace HTO-09/2 1200°C-SG - Load Cell TC-LC100KN.G02 (100 kN) - Connecting cables and mounting materials (as available) (Technical specifications subject to change and errors excepted!) Should you have any further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), RS-Simulatoren Tipas: KKM 110/45 Gamintojas: RS-Simulatoren, vandeniu aušinama Klimatinė kamera 110 m³, įskaitant kondensatorių Tipas KKM 110/45 priklauso RS‑Simulatoren TKM/KKM modulinei konstrukcijai – tai modulinė klimatinė kamera, kuri surenkama kliento vietoje. Ši konstrukcija siūlo: Moduliškumą: atskiri segmentai yra iš anksto surenkami ir montuojami pas klientą. Todėl paprasta vėliau pridėti papildomų modulių arba išplėsti gylį, taip pat nesudėtingas perkėlimas į kitą vietą. Techniniai klimatinės kameros duomenys: Gamintojas: RS-Simulatoren Prüf- und Messtechnik GmbH Tipas: KKM 110/45 Išoriniai matmenys: 6200 x 9400 x 3400 (P x G x A mm), įskaitant techninius priedus Vidiniai matmenys: 5900 x 7000 x 2960 (P x G x A mm) Kameros durys (dvivėrės): 3600 x 2930 (P x A mm) Asmeninė durys (vienvėrė), šoninėje sienoje: 1880 x 900 (A x P mm) Praėjimai: 8 x Ø120mm (4x kairėje ir 4x dešinėje) Langai: 1x (460 x 550 mm) šildomas, priekinėse kamerų duryse 1x (1260 x 1000 mm) šildomas, kairėje šoninėje sienoje Temperatūros diapazonas: nuo -40°C iki +120°C Laiko nuokrypis: ± 0,8K – 1,5K pagal DIN 50011 esant tuščiai bandymų erdvei Drėgmės diapazonas: 10% iki 95% Drėgmės tolerancija: +/- 5,0% Šaltnešis: 2x R404A 52kg, 2x R23 17kg Temperatūros pokyčio greitis: Šildymas: 1,0 K/min Aušinimas: 1,0 K/min Maksimali apkrova 500 kg/m² Elektros duomenys: Įtampa: 3x400V/N/PE, srovė: 340A Svoris: apie 2 000 kg Dkjdpfszizldox Aitjp Saugumo sumetimais, pirkėjams pateikiame šią informaciją: Iš anksto pasiūlytoms kameroms atliekami šie darbai: 1. Funkcionalumo patikra ir reikiamų komponentų keitimas 2. Jei reikia, užpildomas nauju, teisės aktus atitinkančiu šaltnešiu 3. Sandarumo patikra su sertifikatu 4. Po sėkmingos patikros atliekamas dokumentuotas bandomasis veikimas. Būklė: naudotas Pristatymo apimtis: (žr. nuotrauką) (Techniniai duomenys gali būti koreguojami ar netikslūs, informacija nėra galutinė!) Dėl papildomų klausimų mielai atsakysime telefonu.

Būklė: labai geros būklės (naudotas), TIRA Type: TCZ 4022 S -2K Description: Air-cooled Climate Simulation Chamber System Composition: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air treatment compartment - Humidification system - Machinery compartment - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ± 0.5°C (without thermal test chamber load, in accordance with DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ± 1.0°C (without thermal test chamber load, in accordance with DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) Performance range for climate testing: - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% rh (without thermal chamber load) - Dew point temperature range: +5...+89°C (without thermal chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% rh (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% rh (without thermal chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design Features: - Air guidance: Dkjdpfjzizk Hox Aitjp * Supply air: Perforated sheet at the rear wall, in the ceiling area * Exhaust air: Perforated sheet at the rear wall, in the floor area - Temperature control: * Direct cooling via evaporation of refrigerant in a finned heat exchanger * Heating via electric resistance heater - Dehumidification: * Direct dehumidification by evaporating refrigerant in a heat exchanger - Interior cladding: Stainless steel - Exterior cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel, floor load 15,000 N/m² - Wheel load (bearing surface ≥4 cm²): 1,500 N/wheel - Door: Double-wing door, stainless steel, lacquered exterior with viewing window (W x H) 1,000 x 1,000 mm - Chamber lighting: 4 spotlights at 500 W each - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Blitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL 9010, white - Door: RAL 9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidifying unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Būklė: labai geros būklės (naudotas), Weiss Type: WK 27'/50-150 Climatic Test Chamber Water-cooled Technical Data: Test chamber designation: WK 27'/50-150 External dimensions: Dsdpfjzizhfex Aitokp Height: 3500 mm, Width: 3400 mm, Depth: 6000 mm Control cabinet dimensions: Height: 2000 mm, Width: 2400 mm, Depth: 400 mm Internal dimensions: Height: 3000 mm, Width: 3000 mm, Depth: 3000 mm Floor load: 30,000 N/m² (surface load) Test chamber volume: approx. 27,000 litres Specimen mass: 1,000 kg Cooling / Heating operation: -50°C to +150°C Heating rate: 1.0 K/min Cooling rate: 1.0 K/min Temperature constancy: ± 0.3 to 1.0 K (over time) Temperature stability: ± 0.1 to 0.5 K (over time) Climatic operation: 10 – 90°C Humidity: 10...98 % r.h. Temperature constancy: ± 0.1 to 0.5 K (over time) Dew point range: +4 to +84°C 3/N / PE AC 400 V ±10% 50 Hz Weight: 7,000 kg Refrigerants: R23 and R404A Supplied with additional floor plates to increase load capacity Important information for your safety as a buyer! The following measures are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful testing, the chambers are subjected to a trial run, monitored with calibrated instruments. Condition: used Scope of delivery: (see image) (Subject to technical changes and errors! All information is non-binding!) Should you have any further questions, we will be happy to answer them by phone.

Būklė: naudotas, mytron Model: T2240 Water-cooled temperature chamber Technical data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 liters Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature stability: +/- 0.5 °K Spatial temperature stability: +/- 1.0 °K Cooling: Water cooling, Inlet and outlet: 1'' female thread Cooling water shut-off via solenoid valve when device is OFF Fault display for chiller malfunction Cooling water consumption: inlet temp. approx. 15 °C, approx. 15 l/min, outlet temp. approx. 22 °C (continuous cooling approx. 27 °C) Mains connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Dedpjzizg Usfx Aitjkp Protection: 3 x 20.0 A time-lag, 3 x 10.0 A time-lag Lighting: 25 watt each, left and right sides of test chamber Exhaust connection: DN 100 mm push-fit system Safety device: Electronic overtemperature protection, fixed setting Smoke gas monitoring with audible alarm Viewing window: triple-glazed 130 x 360 mm Refrigerant: R404A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and errors excepted!) Further questions can be answered by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C Dodjzizghepfx Aitekp - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Model: TW-60/9 Water-cooled Temperature Test Chamber CTS Temperature Test Chamber, Model TW-60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specification: Dedszizdyopfx Aitjkp Cooling unit: - Water-cooled, low-noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerant R23 / R404 A Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-side test item control Technical performance data: Temperature testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K over time - Average temperature change rate, measured with test item and heat input, at air supply: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% loaded - Heat input: 3000 watts continuous Technical data based on ambient temperature +25 °C, rated voltage 400 V, without test item, without heat input, and without additional equipment. Dimensions: - Test volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber inner dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 48.9 kW - Rated current: 74.9 A - Protection class: IP54 - Cooling water connections: cooling water supply/return R1 ¼” internal thread - Condensate drain: non-pressurized, R1” internal thread - Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) We are happy to answer further questions by phone.

Būklė: naudotas, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 24.07.2020 Full analysis with the stationary spark spectrometer SpectroMaxX: With the spark spectrometer, alloy compositions and trace elements in macroscopic solid samples can be measured with high precision down to the ppm range. System Description: Open spark stand for high sample throughput Compatible with a wide range of sample geometries The following base elements are available: Magnesium The elements and concentration ranges that can be analyzed depend on the methods available for each base element. Usable wavelength range: 170-670 nm Output of measured values in concentrations or intensities Selectable output units (%, ppm) Display of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD Optics: High-resolution CCD multi-detectors Dksdpszizdtjfx Aitjp Temperature-stabilized Effective wavelength range: 140-670 nm (configured according to customer’s requirements) Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements On-site expansion with additional modules possible Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption with argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate is easily replaceable Temperature-absorbing design, requires no water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digital plasma generator with digital discharge definition, digital pulse generation and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power: 4 kW Display system: Dedicated microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitor Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in background Automatic checking and identification of alloy/grade Result manager Online maintenance scheduler Ambient conditions: Room temperature: 10–30°C Conditions: (10–30°C) Relative humidity: 80%, non-condensing Atmosphere: free of corrosive vapours and excessive dust Spectrometer: 90–253 V, 50/60 Hz Max. data 400 VA when sparking Fuse: 16 A slow-blow Version: Benchtop Depth: 750 mm Width: 625 mm Height: 450 mm Weight: 77 kg Condition: used Scope of delivery: (see photo) (Subject to modifications and possible errors in technical data!) If you have further questions, we are happy to answer them by phone.