RS Oils

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System type: Temperature control unit for wash and elution solutions Year of manufacture: 2020 Serial number: 1003563 Device number: KK6752 Design: Stainless steel skid, pharmaceutical-grade construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control skid on a welded stainless steel frame (skid system) Materials: Product-contact surfaces: Stainless steel 1.4435 / 1.4404 Non-product-contact surfaces: Stainless steel 1.4301 Piping system: Orbital welding (pharmaceutical grade) Fully welded design As-built isometric drawings available Pressure data: Leak test with compressed air Test pressure: 3.37 bar Hold time: 1 hour Result: Leak-free Measurement and control technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit value) Flow monitoring Position feedbacks Motor control Hnedpfx Aoyl Ipcebvjl On/off pneumatic valves Pressure sensor measuring range: 0–10 bar Electrical connection: Control air: 6 bar Automation-ready (PLT points fully documented) Main components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling medium: Cooling brine (inlet/outlet interfaces available) ───── Dimensions / Weight Design: Compact skid unit Industrial-grade for cleanroom/technical areas (Transport and installation dimensions according to layout drawing) Application Area Temperature control for: Washing solutions Elution solutions Process media in biopharmaceutical environments Fields of application: Biotechnology Plasma fractionation GMP production facilities Construction / Configuration Welded stainless steel frame Low-vibration pump installation Hygienic piping layout Full implementation according to P&ID Clear separation of product and non-product areas Service and maintenance accessibility verified Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID (R&I) diagram review completed Layout drawing review completed Condition Year of manufacture 2020 Industrial and pharmaceutical grade Brand new, original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout review P&ID (R&I) review Leak test Sensor calibration Maintenance and accessibility review EN10204 factory certificate Material lists (LBM) As-built isometric drawings Component lists (equipment & PLT points) Special features Pharma GMP-compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant engineering by BRINOX High-end biopharma standard

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Manufacturer: BRINOX Type: LEP 2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag Number: MR-INH-VPR61-KK6751 Equipment Number: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Wash Solution Temperature Control Unit (Temperature Control Skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Completely insulated piping and components Pumps: Two circulation pumps with electric motor Stainless steel pump housing Inline configuration Heat Exchanger: Integrated stainless steel heat exchanger Shell-and-tube design Valves: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Measuring Technology: Pressure transmitter Pressure gauges Temperature measuring points Hedpfjyl Ib Eox Abvenl Integrated flow measurement Electrics: Integrated control cabinet/terminal box Wired ready for connection Industrial standard components Piping: Stainless steel process piping Fully insulated Flange and clamp connections Transport: Forklift and crane compatible Robust stainless steel base frame Application The temperature control unit is designed for controlled thermal management of a wash solution within pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical process plants as well as temperature-regulated media circuits. Construction Compact, modular skid design Pre-assembled and ready for connection High-quality stainless steel fabrication Industrial-grade components, including GEMÜ valves Service-friendly construction Condition New system Never commissioned Original packaging Directly from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documentation available Drawings available P&ID available Component lists available Operating manual available Key Features Completely insulated process piping High-quality stainless steel design Industrial brand components Ideal for new projects or as a replacement/redundancy unit Immediate integration possible

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Machine Designation BRINOX Process System / CIP Skid Type CS6700 (CS6723) GMP CIP Process Skid 1.4435 Manufacturer BRINOX Process Systems Year of Manufacture 2020 Technical Data - Stainless steel process skid in hygienic design. - Conductivity measurement: 1–500 µS/cm, analog signal (AI), hygienic connection DN 50. - Flow rate measurement: 0–18,000 kg/h, analog signal (AI), connection DN 25, sterile flange DIN 11864-2A. - Pressure measuring points: −1 to 9 bar and −1 to 15 bar, analog signal (AI), hygienic connections DN 50 and ½", incl. DIN EN ISO 228. - Temperature measuring points: −50°C to +200°C, analog signal (AI), connection DN 32, welded according to DIN 11866/A. - Level limit sensors, digital (DI), hygienic connection DN 50. - Multiple position feedbacks with IO-Link / digital. - Pneumatically actuated on/off valves (DO) in stainless steel hygienic design. - Product-contacting materials according to EN 1.4435 / 1.4404 (AISI 316L). - Documented surface roughness of product-contacting surfaces: Ra approx. 0.3–0.4 µm. Application Hygienic CIP and process system for pharmaceutical and biotechnological applications. Suitable for cleaning process lines and vessels under GMP conditions. Construction - Welded stainless steel skid with orbitally welded piping. - Hygienic clamp and sterile connections. - Fully equipped with flow, pressure, temperature, and conductivity measurement. - Pneumatic valve technology with digital feedback. - Components from renowned brands such as Endress+Hauser, Gemü, Samson, SICK, etc. - Clean, GMP-compliant design. Condition New. In original packaging. Unused. Never installed or commissioned. FAT / Documentation Status - Fully documented Factory Acceptance Test performed. - Layout drawing inspection documented. - Maintenance and calibration accessibility inspection documented. - Surface roughness inspection documented. - Leak testing documented. - Sensor calibration documented. - Welding documentation fully reviewed. Complete Documentation List - FAT plan and FAT report. - P&ID diagram. - Layout drawings. - Material lists (metals and polymers). - Material certificates 3.1. - WPQR, WPS, welder qualifications. - Welding logs and isometrics. - Calibration certificates for test equipment. - Surface roughness measurement protocols. - Leak test protocols. - EU declarations of conformity for installed components. - Operating documentation. Special Features - GMP-compliant, fully documented manufacturing. - High-quality instrumentation. - Very low documented roughness values. - Immediately available. - Ideal for pharmaceutical, biotech, or contract manufacturers with high documentation requirements. Hsdpfx Ajyl H Svebvjnl

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Manufacturer BRINOX Model LEP 12 – CIP System Precipitation PRE LEP 12 CS6721 Package 3 Hjdpfeyl H H Tsx Abvjnl Year of Manufacture 2020 Condition New, originally packaged, unused. The system was only tested at the factory as part of the FAT. No commissioning, no production, no media contact during operation. Description Modular CIP process system for pharmaceutical applications in hygienic stainless steel design. Compact skid-mounted unit with fully integrated measurement, pump, and valve technology. Dimensions Approx. 1520 x 970 x 1994 mm Materials Product-contact parts: Stainless steel 1.4435 Frame/Construction: 1.4301 Welding execution according to EN ISO 13920 Equipment – Shell-and-tube heat exchanger – Hygienic centrifugal pump – Magnetic inductive flow meter – Conductivity measurement – Pressure transmitter – Temperature measuring points – Pneumatic seat and diaphragm valves – Stainless steel frame construction – CIP supply / CIP return – Media connections for NaOH, acetic acid, steam, condensate, wastewater Testing Complete FAT performed, including: – Layout inspection – P&ID diagram check – Maintenance and calibration accessibility check – Documentation verification – Surface roughness inspection – Sensor calibration – Welding documentation check – Leak test with compressed air – passed Calibration certificates available. Material certificates 3.1 available. Complete welding documentation (WPS, WPQR, welding certificates, NDT reports). CE-compliant design. Scope of Supply Complete pre-assembled process module including documentation. FAT reports, welding records, material certificates, and calibration certificates fully included.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 3 500 l, Įranga: dokumentacija / vadovas, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product Type: Storage tank / process vessel Nominal volume: 3,500 liters Total volume: 4,082 liters Jacket volume: 226 liters Empty weight: approx. 1,760 kg Product contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: 1.4404 CE Marking: CE 0036 Permissible pressure PS vessel: -1 / +3 bar Permissible pressure PS jacket: -1 / +6 bar Test pressure PT vessel: 5.6 bar Test pressure PT jacket: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 code Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (identification number 0036) TÜV approval including design review, final inspection, and pressure test fully documented. FAT – Factory Acceptance Test The vessel has been fully tested and released ex works. Tests carried out include: • Pressure test according to PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive tests (RT, PT) • Dimensional and drawing verification (as-built) • Verification of material certificates • Calibration test of pressure gauges • Verification of marking • Documentation check according to inspection list Complete FAT and TÜV protocols available. EXECUTION • Cylindrical, horizontal storage vessel • Double jacket for heating/cooling • High-quality pharmaceutical design • Manway with round pressure closure • CIP pipe system • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty bearing blocks / trunnion design • Lifting lugs • Nameplate with full PED identification DOCUMENTATION – completely and systematically available • EU Declaration of Conformity • TÜV certificate with acceptance report (Module G) • TÜV design inspection and certification • Material certificates 3.1 • Welders’ lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Calibration reports for pressure gauges • Surface and manufacturing reports • Parts list • Detail drawings (body, lid, CIP, J-pipe, etc.) • Operating and maintenance documents Complete digital documentation file available. CONDITION • Never used in production • Warehouse item • Interior as new • No corrosion • No signs of use • Industrial new condition • Immediately available SUITABLE FOR Hsdpfx Asylnwyebvjnl • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production plants • Process and waste treatment plants SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank – this is certified project quality with comprehensive GMP-compliant documentation.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 3 500 l, Įranga: dokumentacija / vadovas, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial No.: 1003460 Year of manufacture: 2020 Condition: As new / unused Package: BH6770-BH1001 Package 28 TECHNICAL DATA Product type: Batch tank / Pressure vessel Working volume: 3,500 litres Total volume: 4,304 litres Jacket volume: 202 litres Empty weight: 1,958 kg Product contact material: 1.4435 Jacket: 1.4404 CE Marking: CE 0036 Design pressure vessel PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Design pressure jacket PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Design temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category III Module G – Individual Inspection Notified body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel underwent full FAT testing and approval at the manufacturer’s site. Inspections performed include: • Pressure test in accordance with PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per inspection plan) • Dimensional and drawing check (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration testing of manometers • Verification of markings • Complete documentation review Full FAT protocols available. DESIGN FEATURES • Cylindrical, horizontal tank • Double jacket with half-pipe coil system • Internally electropolished and passivated • Mirror-finish product surface • Pharmaceutical-grade welds • Manway DN 500 • Powder / product inlet DN 300 • CIP connections • Safety valve • Pressure and temperature ports • Agitator port • Heavy-duty trunnion mounts • Lifting lugs DOCUMENTATION – complete and structured Comprehensive, project-related quality and manufacturing documentation, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with inspection report (Module G) • TÜV design assessment and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing reports (RT, PT etc.) • Analysis certificates for welding consumables and shielding gases Hnodpeylng Usfx Abvol • Company qualification certificate • Surface roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates • Component conformity and documentation as per EU • Parts list assemblies • Component drawings • Operation and maintenance manuals Complete digital documentation folder available. CONDITION • Never used in production • Stock item • Interior surface absolutely as-new • No corrosion • No signs of use • Industry-new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications SPECIAL FEATURES Premium BRINOX pharmaceutical manufacture with full PED Module G individual approval by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank – this is certified project quality with comprehensive GMP-compliant documentation.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 1 500 l, Įranga: dokumentacija / vadovas, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6726-BH1001 Type: SVMBBI-1500 Year of Manufacture: 2020 Serial No.: 1003458 Equipment No.: 20051401 CE Marking: CE 0036 Condition: As new / unused Empty Weight: 866 kg Hnedpfx Aoykuhisbvel TECHNICAL DATA Product Type: Main Filling Vessel / Process Vessel Design: Cylindrical with dished ends Working Volume: 1,500 liters Total Volume: 1,785 liters Product-contact Material: 1.4435 Jacket Material: Stainless steel (double-jacketed design) Max. allowable pressure (PS) vessel: -1 / +3 bar Test pressure (PT): 5.4 bar Max. allowable temperature (TS): -10 °C / +150 °C Pressure vessel according to PED 2014/68/EU Module: G Fluid group: 1 SURFACES & SPECIFICATION Internal surface: Highly polished, pharmaceutical finish Product-contact areas in 1.4435 Weld seams finely ground Pharma CIP-capable design FITTING/FEATURES • Double jacket for heating/cooling • Large manway with quick-release clamps • Multiple instrument and process nozzles • Pressure sensor / temperature connections • Bottom outlet • CIP/sprayball connections • Various blank flanges • Insulated media connections on jacket • FDA-compliant seals CONDITION • Never used in production • Stored as warehouse stock • Interior absolutely as new • No corrosion • No signs of use • Immediately available DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV test and approval documents • PED Module G documentation • 3.1 Material certificates • Pressure test report (PT 5.4 bar) • Technical drawings • FAT documentation • Operating manual FEATURES Large-capacity BRINOX main filling vessel, 1,500 L in 1.4435, PED Category IV Module G, CE 0036, with complete documentation, pharmaceutical-grade internal finish and pressure tested to 5.4 bar. Project quality for sterile applications – immediately available.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 1 500 l, Įranga: dokumentacija / vadovas, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6722-BH1001 Year of manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Product type: Main/process vessel Design: cylindrical with dished ends Working volume: 94 – 1,500 litres Empty weight: 866 kg Product-contact material: 1.4435 Jacket material: 1.4307 Insulation: fitted Operating pressure (vessel): -1 / +3 barg Design pressure (PS): -1 / +3 barg Test pressure (PT): 5.4 bar Permissible temperature (TS): -10 °C / +150 °C Hydrostatic test date: 2020/04 Pressure vessel according to PED 2014/68/EU Category IV Assessment procedure: Module G Notified body: TÜV SÜD Industrie Service GmbH Design code: AD 2000 SURFACES & WELDS Internal surface: Electropolished and passivated Pharma specification External surface: Industrial ground finish NDT / Tests: RT (radiographic testing) PT (dye penetrant test) Pressure test documented 2020 EQUIPMENT • Double jacket for heating/cooling • Large front manway • Multiple process nozzles • CIP connections • Temperature and pressure ports • Safety fittings • Agitator mounting • FDA-compliant seals • Complete piping module CONDITION • Never in productive use • In stock • Internal surface absolutely as new • No corrosion • No signs of wear • Immediately available DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificates and acceptance reports • PED Module G documentation • Material certificates 3.1 (EN 10204) • Welding protocols • NDT reports (RT / PT) • Pressure test record 2020 • Surface protocols • Detail and assembly drawings • FAT documentation • Operating and maintenance manuals Hodpjykuc Tjfx Abvjnl HIGHLIGHT BRINOX pharma process vessel in 1.4435 with electropolished internal surface, AD2000 design, PED Category IV Module G, complete TÜV acceptance 2020, and full technical documentation. Project quality for sterile applications – immediately available.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: BH6723-BH1001, bakelio talpa: 1 000 l, Įranga: dokumentacija / vadovas, BRINOX 1,000 L Pre-Charging Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial Number: 1003454 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-charging / Process vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: approx. 610–762 kg Product contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Hnsdpfx Aeykqmzsbvol Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel according to PED 2014/68/EU Category IV Module G – Single unit inspection Notified body: TÜV SÜD ID number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate no.: Z-EU-SI-LJU-20-05-2702107-19125214 Inspection report no.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection carried out according to PED Annex I No. 3.2 Pressure test carried out according to Annex I No. 3.2.2 Acceptance without deviations Permissible number of load cycles: 10,000 (1.3 bar) Acceptance date: 20.05.2020 FAT – Factory Acceptance Test Full FAT performed in the factory: • Pressure test • Visual weld seam inspection • NDT inspections (RT/PT) • Dimensional check • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation review FAT completely documented. EXECUTION • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internal surface electropolished • Pharmaceutical grade weld execution • Manway DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and instrumentation nozzles • Suitable for pressure and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G approved • Industrial mint condition • No signs of use • Immediately available DOCUMENTATION Complete, structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design review • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welder lists • NDT reports • Surface roughness reports • Internal pressure test • Dimensional protocols • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation portfolio available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP plants • Biotechnology High-quality BRINOX pharmaceutical execution with PED Cat. IV Module G single unit test by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – verified project quality. Immediately available.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: BH6721-BH1001, bakelio talpa: 1 000 l, Įranga: dokumentacija / vadovas, BRINOX 1,000 L Pre-Filling Vessel – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag No.: BH6721-BH1001 Serial Number: 1003453 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling vessel / process vessel Nominal volume: 1,000 litres Total volume: 1,400 litres Empty weight: 762 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) CE marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design in accordance with AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – individual inspection Notified body: TÜV SÜD Industrie Service GmbH (identification no. 0036) TÜV approval including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel was fully FAT-tested and released at the factory. Tests performed include: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive tests (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of manometers • Verification of labelling • Complete documentation audit FAT protocols fully available. DESIGN • Cylindrical, horizontal vessel • Double jacket for heating/cooling • Internally electropolished and passivated • High-gloss polished product surface • Pharmaceutical-grade weld seams • DN 500 manhole • CIP connections • Safety valve • Manometer • Bottom diaphragm valve • Agitator connection (DN 200) • Multiple spare connections • Heavy-duty trunnion / journal bearings • Transport and lifting equipment DOCUMENTATION – comprehensive and well-structured Extensive project-related quality and manufacturing documentation available, including: • EU declaration of conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • 3.1 Material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (RT, PT etc.) • Analysis certificates for welding filler materials and shielding gas • Company qualification certificate • Surface roughness protocol • Surface treatment report • Dimensional accuracy inspection report • Internal pressure test report • Calibration certificates for manometers • Reports and EU conformity for installed components • Compilation with parts list • Component drawings • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never in productive use • Stock item • Internal surface absolutely as new • No corrosion • No signs of use • Factory-new condition Hnsdpfxeykpqro Abvsl • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotechnological applications FEATURES Premium BRINOX pharmaceutical-grade manufacturing with complete PED Module G individual inspection by TÜV SÜD, CE 0036 marking, and fully documented FAT testing. Not a standard tank – but project-quality, fully certified to GMP standards with comprehensive documentation. Available immediately.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 30 000 l, Įranga: dokumentacija / vadovas, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – incl. Saddle Support – 2020 – Mint Condition Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial No.: 1003464 Year of Manufacture: 2020 Condition: As new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / solution tank / pharmaceutical process vessel Working volume: 30,000 litres Total volume: 33,213 litres Product-contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated and cleaned Surface roughness: Ra < 1.6 µm Standards and regulations: • PED 2014/68/EU compliant • CE marking present • Pharmaceutical design compliant with GMP Pressure data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20 °C to +50 °C Hydrostatic pressure test performed. FAT – Factory Acceptance Test Comprehensively documented FAT conducted, including: • Dimensional, visual, and identification check • Weld seam and NDT inspections • Pressure test in accordance with PED • Inspection of all connections • Documentation and quality check FAT fully passed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process tank • Stainless steel 316L, pharmaceutical grade • Internal surfaces pickled and passivated • Hygienic, GMP-compliant construction Connections include: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measurement, safety, and process ports Mechanical features: • Original BRINOX stainless steel saddle support included • Heavy-duty design • Lifting points for crane handling available CONDITION • Absolutely as new • Never installed or put into operation • Never filled with product • No corrosion or signs of use • Original industrial packaging present • Immediately available Saddle support also as new and included in the scope of supply. DOCUMENTATION – fully available (GMP-compliant) Extensive manufacturer and project documentation, incl.: • EU Declaration of Conformity and CE documentation • PED documents • Material certificates EN 10204 – 3.1 • Welding documentation (WPS / WPQR, welder lists) • NDT inspection reports • FAT protocol and pressure test report • Roughness and surface reports • Calibration certificates • Part drawings and parts lists • Operating and maintenance manuals Documentation fully available in digital format. TRANSPORT AND PACKAGING Hnsdpfjykngfjx Abvjl • Professional export packaging available • Original industrial packaging • Crane handling possible without issues • Worldwide shipping possible SUITABLE FOR • Pharmaceutical industry • Biotechnology • WWAS, WFI and PW systems • Sterile process solutions • GMP production facilities SPECIAL FEATURE Project surplus from an international pharmaceutical greenfield project with comprehensive FAT, PED compliance and GMP documentation. Large-volume BRINOX 30,000 L pharma process tank in new plant quality incl. saddle support – immediately available.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 9 000 l, Įranga: dokumentacija / vadovas, BRINOX 9000 L GMP Washing and Elution Solution Vessel Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The vessel was used in a pharmaceutical production facility. Suitable for the preparation, storage, and supply of process solutions in GMP environments. Design and Equipment Cylindrical stainless steel vessel in horizontal design Process connections on the end plates Large manway with pressure locking device Integrated CIP system with spray ball High-gloss polished internal surface Hygienic, product-contact fittings Hjdpfjykkk Hox Abvenl Multiple measurement and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel support legs included Condition Visually and technically in very good condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and mounted parts as shown in the photo documentation are present. FAT and Documentation Status According to FAT documentation “IT-11.1 Welding Documentation Inspection,” the welding documentation was reviewed during factory acceptance testing (FAT 01, 23.10.2020). Confirmed, among others: Designation of welders and welding inspectors Welder qualifications per EN ISO 9606-1 WPS and WPQR documentation Proofs for shielding gas suitability Documented test welds Visual spot checks without complaints Traceability according to 3.1 material certificates The complete welding documentation is included in the Turn-Over Package. Documentation – fully available FAT plan and FAT report Layout and design drawings P&ID diagrams Calibration protocols Surface and roughness tests Leak test Welding plan WPQR WPS Welder qualifications Borescopy report Incoming goods inspection reports Sensor calibrations The complete technical documentation is available in digital form. Special Features Fully documented GMP version with verified welding documentation and comprehensive quality package. Highly suitable for reinstatement in pharmaceutical production facilities or for validation-required applications.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 9 000 l, Įranga: dokumentacija / vadovas, BRINOX 9,000 L Wash Solution Tank – 316L – Double Jacket – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6751-BH1001 Package 31 Year of Manufacture: 2020 Condition: As new / unused Technical Specifications Product Type: Wash Solution Tank Nominal Capacity: approx. 9,000 liters Product-contacting Material: 1.4404 (AISI 316L) Design: Horizontal configuration CE Marking: Present Pressure Vessel according to PED 2014/68/EU TÜV inspected with acceptance report Hnjdpfx Abeykkivsvsl Double jacket available for heating/cooling Designed for pharmaceutical applications Internal Surface: • High-gloss polished • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Heavy-duty, project-specific fabrication in 316L stainless steel • Large-diameter manway with pressure lock • Integrated CIP spray lances / cleaning pipes • Multiple clamp and flange connections • Instrument connections (pressure, temperature, sensing) • Robust lifting and handling lugs • Industrial-grade heavy-duty construction • Externally pre-installed piping and process connections • Excellent accessibility for maintenance and inspection The images clearly show the high-quality workmanship, clean welding, and mirror-polished product-contacting internal surfaces. Condition • Never used in production • Stock item from project surplus • Absolutely clean interior • No corrosion • No signs of use • In as-new industrial condition • Immediately available Suitable for • Wash solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production facilities • Sterile liquid processes Documentation – complete and structured A comprehensive project-related quality and fabrication documentation is available for the tank, including: • EU Declaration of Conformity and warranty certificates • Reports and EU component documentation • Assembly documents • Partial drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design validation and certification • Welder lists, welding procedure qualifications, work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gas • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy inspection • Roughness protocol • Surface treatment report • Operating and maintenance manuals (device) • Operating and maintenance manuals (components) • FAT documents (Factory Acceptance Test) Complete documentation portfolio available digitally. Special Features This is not a standard tank, but a high-end project-specific fabrication in genuine pharmaceutical quality with certified pressure design, documented manufacturing, and full PED compliance with TÜV approval. Heavy, robust construction, large-dimensioned connections, and CIP integration make this tank ideal for demanding GMP applications.

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 3 200 l, Įranga: dokumentacija / vadovas, BRINOX 3,200 L Solution Tank – 316L Stainless Steel – Double Jacket – TÜV / PED Module G – FAT – 2020 – Like New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of Manufacture: 2020 Condition: Like new / unused TECHNICAL DATA Type: ELUTION / Solution Tank Capacity: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: Present (CE 0036) Tank Pressure: Operating pressure: -1 / +3 bar Test pressure: According to TÜV inspection Jacket Pressure (Heating/Cooling Jacket): Operating pressure: -1 / +6 bar Test pressure: According to TÜV inspection Temperature range: -20 °C to +150 °C Pressure vessel in accordance with PED 2014/68/EU Module G – Individual inspection Acceptance by notified body (number 0036) FAT – Factory Acceptance Test The tank was tested as part of a documented FAT. The inspections included, among others: • Welding documentation review • Visual inspection of weld seams • Leak testing • Pressure testing • Surface roughness measurement • Calibration test of sensors • Layout and dimensional check • Documentation review Comprehensive FAT report including test records available in full. DESIGN FEATURES • Double jacket for heating/cooling • Completely made from 316L stainless steel • Mirror-polished interior surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / inspection ports • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensors) • Heavy-duty project execution • Lifting lugs for crane handling CONDITION • Never used in production • Warehouse surplus from project stock • Interior absolutely clean • No corrosion • No signs of use • Industrial as-new condition • Immediately available DOCUMENTATION – complete and structured A comprehensive, project-specific quality and manufacturing documentation is available for the tank, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design review and certification • Material certificates (3.1) • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive testing (NDT) reports • Analysis certificates for welding consumables and shielding gas • Surface roughness report • Surface treatment report • Dimensional accuracy inspection • Internal pressure test • Calibration certificates • Assembly documentation • Part drawings • Operating and maintenance manuals Complete documentation folder available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media SPECIAL FEATURE This is not a standard tank but a high-specification, BRINOX project-built vessel in true pharmaceutical quality, featuring validated pressure design, full PED compliance (Module G), documented FAT inspection, and comprehensive quality documentation. Project-grade equipment for sterile applications – immediately available. Hnedpeykkhrefx Abvsl

Būklė: naujas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 3 200 l, Įranga: dokumentacija / vadovas, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag-No.: BH6761-BH1001 Serial Number: 1003446 Year of Manufacture: 2020 Condition: As new / unused Technical Data Product type: ELUTION / Solution Tank Volume: 3,200 litres Empty weight: 1,815 kg Material: 1.4404 (AISI 316L) CE marking: CE 0036 Tank Pressure Operating pressure: -1 / +3 bar Test pressure: 4.6 bar Jacket Pressure (heating/cooling jacket) Operating pressure: -1 / +6 bar Test pressure: 10.8 bar Temperature range: -20 °C to +150 °C Pressure vessel according to PED 2014/68/EU Module G – Individual assessment Notified body: TÜV SÜD (registration number 0036) Permitted number of load cycles: 7300 / 5475 at pressure fluctuation range 3.3 / 4.5 bar TÜV / PED / FAT • EU certificate of conformity according to 2014/68/EU • Certificate Number: Z-EU-SI-LJU-20-08-2350154-14124056 • Test report available Hnodoykkbxspfx Abvsl • Pressure test with water successfully completed • Final inspection by TÜV SÜD Industrie Service GmbH • Factory Acceptance Test (FAT) performed • Module G individual approval • Complete Turn-Over-Package (TOP) included Full documentation available The complete technical documentation package is available, including: • EU Declaration of Conformity and Warranty Certificates • TÜV certificate with inspection report • TÜV design review and certification • Nameplate documentation • Assembly drawings • Part drawings • Welder lists and welding procedure qualifications • Work samples • Analysis certificates of welding consumables • Analysis certificates of welding gases • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy inspection • Surface roughness protocol • Surface treatment report • Operating and maintenance manuals (equipment and components) Scope of documentation meets project standard for pharmaceutical systems. Design • Double jacket for heating and cooling • Fully made of stainless steel 316L (1.4404) • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manholes / inspection ports • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensors) • Heavy-duty project construction • Lifting lugs for crane handling • PED-compliant pressure design Condition • Never used in production • Stock item from project surplus • Interior absolutely clean • No corrosion • No signs of use • Industrial as-new condition • Immediately available Suitable for • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media Special feature This is not a standard tank, but a premium BRINOX project fabrication in genuine pharmaceutical quality, featuring: • PED Module G individual assessment • TÜV SÜD acceptance • FAT performed • Complete welding, material, and inspection documentation • Documented surface treatment • 316L execution for sterile applications Project-grade quality for demanding GMP applications – immediately available.