QCT engineering LTD

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1990, Siūlome šią paruoštą naudojimui RAVNE DEE 630 transfero presą, pagamintą 1990 m. Gamintojas: RAVNE Knjdpfozbta Sjx Akysc Modelis: DEE 630 Pagaminimo metai: 1990 Būklė: paruošta naudojimui Kategorijos ID: 1122 Tipo ID: 1489 Staklių tipas: transfero presas Jei turite klausimų arba reikia daugiau informacijos, nedvejodami rašykite mums žinutę arba paskambinkite.

Būklė: naujas, Gamybos metai: 2025, Pressure: 1000 t Frame gap: 4250 mm Stroke: 400 mm Control: SIEMENS S7-1500F Table dimensions (longitudinal): 4000 mm Table dimensions (transverse): 1600 mm Total power requirement: 200 kW Machine weight approx.: 250 t Space requirement approx.: 7.5 x 4.8 x 7.4 m This new FAGOR TSE2-1000-4000-1600 transfer press is available immediately!! DESCRIPTION: New transfer press!! Stored, never installed. COMPLETE with electronic beam transfer 0 - 800 mm transfer pitch and 500-1300 mm distance between transfer beams. Lifting stroke = 0-150 mm. 2 x T-slot sliding tables, extendable. Max. tooling total weight: 20,000 kg; upper part max. 10,000 kg. Ram counterbalance by pneumatic cylinder. Automatic pressure adjustment with setpoint input via the die memory. Lubrication: main bearings and gears with continuous circulation lubrication. LED tool area lighting. 2 auxiliary operator panels, scrap guide plates, press force measuring system, KTI vibration insulators. Technical Data: Frame type: Transfer press Drive type: Mechanical Side column windows: Yes Through-hole in table: Yes Sliding table: Yes Number of tables: 2 Pressing forces Total nominal force: 1000 t Press table Clamping area (left-right): 4000 mm Clamping area (front-back): 1600 mm Height above floor: 600 mm automatic die clamping system: Yes Ram Stroke: 400 mm Knodsym D E Aopfx Akysc Ram (mechanical press) Ram adjustability: 300 mm Strokes per minute min.: 8 /min Strokes per minute max.: 50 /min Hydraulic overload protection: Yes Tool installation dimensions Tool installation height (stroke bottom, adjustment): 766 mm Distance between uprights (left-right): 4250 mm Clear side passage width: 1800 mm Max. tool weight: 20,000 kg Transfer system Gripper rail inner width closed max.: 500 mm Gripper rail inner width open max.: 1300 mm Electrical connection data Power consumption (total): 200 kW Connected load: 350 kVA Connection voltage: 400 V Mains frequency: 60 Hz Dimensions / Weights Space requirement length: 7500 mm Space requirement width: 4800 mm Height above floor: 7360 mm Height below floor: 4000 mm Total weight approx.: 250,000 kg Additional equipment for presses Light barrier: Yes Cut stroke damping: Yes automatic die clamping system: Yes Hydraulic overload protection: Yes Transfer device: Yes

Būklė: reikia remonto (naudotas), Gamybos metai: 1972,

Būklė: naudotas, Gamybos metai: 2014, Technical Details: Stamping force: 500 kN Shearing force: 9.0 t Control: Siemens Touch Panel S7 Ram adjustment: 80 mm Fixed stroke: 170 mm Strokes per minute: 20 - 120 spm Gap width: 1,140 mm Shut height: 350 - 430 mm Side frame opening: 315 mm Table surface (L x W): 1,100 x 400 mm Ram surface (L x W): 1,100 x 400 mm Throughhole in table: 950 x 100 mm Table height above floor: 1,100 mm Side frame passage: 315 mm Drive power AC: 230 VAC / 24 VDC kW Operating pressure: 6 bar Operating hours: Machine 1: 6,654 h Operating hours: Machine 2: 5,970 h Total connected load: approx. 30 kW per machine Machine weight: approx. 9.5 t per machine 2 mechanical transfer presses – TRANSFER PRESS LINE in automated operation. This transfer press line is currently set up for the production of vehicle sockets/electrical sockets. The system includes: 1. Uncoiler PM245 with loop control, Coil weight 2 t, coil width up to 450 mm 2. Servo-driven strip feeder (roller feeder) with 2 axes (cross and longitudinal) Knedpfx Asu Nfttekysc 3. Press 1: Deep drawing press with five pneumatic ejectors (individually adjustable and extendable) 4. Feeding system from Püschel Förderbahn, drum vibratory feeder, linear vibratory feeder, Output up to 100 parts/minute Swivel belt conveyor for transferring deep-drawn parts / onward transfer via inclined conveyor into the peat swivel conveyor / onward transfer into the feed of the stamping press via mechanical oscillating rails 5. Punch press 2 (prepared for ejectors) Multiple safety fences, protective devices, safety switches, monitoring systems (Pilz PLC) (compliant with machinery directives) Optional: 1 unused reserve flywheel gearbox Optional: Complete tooling set for the manufacture of vehicle sockets (e.g. for cigarette lighters or electric devices) including complete technology and technical drawings (DXF)

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Used hydraulic press SACK & KIESSELBACH TRP 200. Originally configured as an automatic transfer press, it was converted to manual operation in 2012, but can be retrofitted for automatic operation again. The press is still assembled, powered, and in very good condition. Pressing force (tons): 200 Oil volume (liters): 1100 Stroke (mm): 300 Table size (L x W, mm): 600 x 600 Installation space (mm): 1000 Upper ejector stroke (mm): 25 Knodpjhtaaqefx Akysc Upper ejector force (tons): 10 Total weight (kg): 12,000 Operating pressure (bar): 6 Rapid approach lowering speed (mm/sec): 375 Working speed (mm/sec): 18 - 40

Būklė: naujas, New transfer press line from min. 300 t up to max. 3500 t. We offer new mechanical and hydraulic presses for various applications, customized to your specific requirements. Let us know your needs and we will prepare an attractive offer including installation and service. ISGEC has supplied equipment to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and over 200 presses to 40 Japanese customers. We are proud to have been the official sales partner since 2020 and look forward to hearing from you. Knjdpjf Rt Ubefx Akyec