Suvirinimo savo ruožtu lentelė

3 Tonnen Protec KT 3000

Sąlyga: beveik kaip naujas (parodų įrenginys), Protec KT 3000 HV, hydraulically height-adjustable Load capacity: 3,000 kg Handheld remote control with digital display Dual foot pedal control Height approx. min. 700 mm tilted to center, max. height 1,400 mm Faceplate diameter: 1,400 mm Gjdpfx Abofxpggodoil Tilt angle: min. 135° Rotation speed: 0.05 to 0.9 rpm Motor power: 3 kW

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), Rubber Belt Continuous Shot Blasting Machine Manufacturer: Rösler Drum diameter: 400 mm Max. workpiece length: 700/1000 mm Max. single piece weight: 12 kg Loading capacity: 100 kg Blast wheels: 4 units, each 7.5 kW Installed power: 45 kW Gjdjn E Tubjpfx Abdsil Warranty: 6-month functional and performance warranty when commissioned by DECK Sarl. Spare parts supply guaranteed for the next 10 years OPTIONAL: Delivery to your facility Supervisor installation / commissioning / training

Sąlyga: naujas, Gamybos metai: 2024, 600 kg load capacity Height-adjustable welding turntable with 100 mm through-hole Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Height when tilted min. 0.45 m, max. 0.95 m Speed from 0.01 to 1.3 rpm Tilting angle up to 135° Gisdpfx Ajg Tdpgobdel Hand and foot remote control with speed display Very robust design

Sąlyga: naujas, Gamybos metai: 2025, keliamoji galia: 2 000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2,000 kg Handheld remote control with digital display Dual foot pedal control Height approx. min. 800 mm tilted to center, max. height 1,400 mm Min. height horizontal: 1,000 mm Faceplate diameter: 1,200 mm Minimum tilt angle: 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW Gedpfx Abencfvhedeil

Sąlyga: naujas, Pre-bending: 6.0 mm Sheet length: 3100 mm Sheet thickness: 8.0 mm Total power requirement: 11.0 kW Gjdpod Ab H Hofx Abdeil Weight approx.: 6.7 t Dimensions (LxWxH): 4.88 x 1.16 x 1.18 m Image similar Bending capacity: 8.0 mm » at 3x top roll diameter Pre-bending: 6.0 mm » at 1.5x top roll diameter Top roll diameter: 230 mm Bottom roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of top and bottom rolls via planetary gearbox • Digital readout for side roll positions • Hydraulic drop-end bearing • Device for conical bending • Hardened rolls • Hydraulic adjustment of side rolls synchronized via PLC • Hydraulic adjustment of bottom roll via torque shaft • Pressure-adjustable bottom roll • Electrical and hydraulic overload protection • Mobile control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment comply with CE regulations Catalog available at the following link: Important points for conical rolling: • The maximum sheet thickness is 50% of the nominal capacity • The cone length must be a maximum of 30% or more than 60% of the roll length • Hardened rolls are recommended

Sąlyga: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Space requirements: approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double mitre band saw K-tech DG 50/33 HA-I - 2-column mitre saw - Robust yet easy to operate - Material height sensor (Automatic cut start detection) - Smooth operation thanks to mitre cut, feed regulator, and cutting pressure regulator - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration through mitre cut - Ergonomically designed, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min - Hydraulic cutting pressure control valve - Hydraulic operation of saw frame and vice - LEDs for monitoring all safety functions - Large-diameter wheels (520 mm) - Clear mitre adjustment up to 60° Godjfg E Hlepfx Abdeil Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid lowering to the start of the material, or for series cuts, cut immediately 4. Saw blade off 5. Raise frame just above the material 6. Open vice

Sąlyga: naujas, Gamybos metai: 2023, Cutting diameter: 1100 mm Saw band length: 11000 x 67 mm Cutting width: 1.6 mm Cutting capacity at 90 degrees, square: 1100 x 1100 mm Cutting capacity at 90 degrees, flat: 1100 x 1300 mm Total power requirement: 7.5 kW / 3100 Nm Gsdpfxjtq Dw Eo Abdeil Machine weight: approx. 8,700 kg Space requirements: approx. 2800 x 1700 x 5200 mm The KSY 1100 x 1300 is a semi-automatic, column-guided horizontal bandsaw. This machine is available for immediate delivery. Chips are removed via a conveyor screw. A chip trolley approx. 60 x 50 x 40 cm is included in the scope of delivery. The roller tables can be controlled forward and backward via the control panel. On the outfeed side there is a roller table measuring 1.40 x 1.00 meters. On the infeed side there is a motorized roller table measuring 2 x 1.40 meters. Optional Specifications - Motorized system for roller table - Laser line - Additional double roller table - PLC screen - Anti-vibration system The images are for orientation purposes only and do not represent a true-to-scale depiction of the machine.

Gamybos metai: 2021, Sąlyga: labai geros būklės (naudotas), Complete set incl. single and dual foot remote control Gjdpfx Asm Ew Stebdoil Digital display for speed Hydraulic height adjustment Dimensions: - Tilted height min: 800 mm - Tilted height max: 1900 mm - Horizontal height min: 1050 mm - Horizontal height max: 2000 mm Clamping plate diameter: 1500 mm Length: 2900 mm, Width: 1400 mm Weight: 3200 kg Speed from 0.01 to approx. 0.7 rpm.

Sąlyga: naujas, Semi-automatic band saw for cutting solid bars and medium-sized profiles with high efficiency and excellent cutting precision. The robust structure provides the machine with the required rigidity and precision to the cutting group. The band drive is powered by a two-speed motor and a special gearbox with a bronze gear and a hardened, ground worm screw. Properly sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide (Widia) plates. Blade tension achieved via an electromechanical device with blade rotation microswitch control. Safety devices against accidents on the flywheel cover guard and the blade. Cutting thickness 1.5 mm. Cutting range 60° left / 60° right. Adjustable stop for repetitive cuts of the same length. Blade cleaning device with brush. Hydraulic power unit motor 0.37 kW. Electric pump 0.09 kW for band cooling. Vice jaw height 200 mm. Giedpfx Asfibd Tobdol Vice jaw length 185 mm. Working table height 760 mm. Machine weight 820 kg.

Sąlyga: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding positioner Protec KT 300 H, 170/400 special version Gisdpfx Ajrypmgebdsl Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor, infinitely adjustable from 0 to 90° Speed continuously adjustable from 0.01 to approx. 5 rpm Includes foot remote control Digital display with welding time limitation (optional)