Keturpusės obliavimo staklės

WEINIG UNIMAT 23E na 7 głowic

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), Darbinis plotis: 230 mm, darbinis aukštis: 160 mm, velenų skaičius: 5, veleno diametras: 50 mm, veleno galia: 4x 5,5 kW / 2x 11 kW, padavimas: 24 m/min, padavimo stalo ilgis: 3000 mm, vertikalaus veleno ašinė eiga: 80 mm, horizontalaus veleno ašinė eiga: 45 mm. Bendras pajungimo galingumas: 126 kW, oro poreikis: 8400–9600 m³/val., staklių matmenys (X/Y/Z): apie 3500 mm / 2000 mm / 1800 mm, svoris: apie 3500 kg. Į komplektą įeina Weinig EM-11 įstūmimo įrenginys ir tinkamas ištraukimo paskirstytuvas. Dokumentacija yra. Galima apžiūrėti vietoje. Ledpfxeu Damde Ah Ushg

Būklė: geras (naudotas), Gamybos metai: 2006, mašinos/transporto priemonės numeris: 108111, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 240 mm, obliavimo aukštis: 160 mm, darbinio aukščio: 180 mm, Four-sided planer after maintenance, machine weight 3,900 kg. Lhodpfx Aovrq U Djh Ueg

Būklė: labai geros būklės (naudotas), WEINIG Hydromat H23 Line, S/N 87321, Year of manufacture 1999, Ref. No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed: 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/brake combos • Pneumatically supported pressure rollers from above • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1, 6, 7, 8, 9 with counter bearings • Spindles 8 & 9 with straight jointer • Spindles 8 & 9 with profile jointer • Spindles 6 & 8 with pneumatic pressure • Reduced roller pitch on feed system • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported lateral pressure rollers • Automatic table lubrication • Central lubrication points • Freestanding operating panel • Total connected load approx. 145 kW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without planer heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors fitted with NEW bearings NEW electronic motor soft start / braking devices NEW hard-chromed table plates NEW hard-chromed fences Many additional NEW PARTS fitted in the machine Condition: See attached photos – technically in first-class condition Lhjdpfx Ahowvqklo Usg Infeed mechanisation unrefurbished – all parts complete and functional Payment: Net cash prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Subject to prior sale and errors excepted.

Būklė: labai geros būklės (naudotas), Four-side planing machine Weinig Profimat 23 Fortec Lhjdoumxqrepfx Ah Usg Working width: 230 mm Working height: 140 mm Number of spindles: 6 Spindle configuration: Bottom: 7.5 kW Right Left: 11 kW Top: 7.5 kW Top: 5.5 kW Bottom: 5.5 kW Pneumatic pressure rollers Feed speed adjustable via variator Drive via cardan shafts CE certificate

Būklė: naudotas, No. 3205 Copy Milling Machine Reichenbacher RMF Used For copying, enlarging, or reducing a model (wooden figure). Produces a wooden blank (wooden figure) in the desired size. Maximum clamping length: 1000 mm The machine requires a floor space of approx. 2500 x 2500 mm (LxW). Ljdpfx Asv Hdg Nsh Ujhg Sale on behalf of customer, ex location near 95485 Warmensteinach, without dismantling, transport, or installation. Dismantling, loading, and transport by us possible for an additional charge. Subject to errors in description and price. To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale as is. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; sold as seen. Photos and videos are examples only and do not represent the actual scope of delivery. Payment terms: Prices plus statutory VAT, payment before collection or shipping. Delivery terms: ex location.

Būklė: naudotas, Number of spindles: 6 units Working width: 230 mm Planing height: 120 mm Jointer table length: 2000 mm Feed motor: 4 kW Feed speed: 5-24 m/min 1 WEINIG Planer and Moulder Unimat 23 E ----- 6 spindles (2 of which are right-hand), reinforced motors, 8,000 rpm, ATS control system Machine will be cleaned and function-tested prior to delivery Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle, bottom, 5.5 kW (motor replaced) ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 125 - 180 mm Rabbetting unit incl. tooling Hardened table insert in front of 1st bottom spindle 2nd spindle, right, 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle, left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left spindle, incl. spring-loaded side roller pressure 4th spindle, right, 8.3 kW (motor replaced) ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 250 mm Max. tool diameter behind fence line: 203 mm Max. profiling depth: 35 mm Ledpexz Hh Uofx Ah Ujhg Axial adjustment: 80 mm 5th spindle, top, 7.5 kW ----- Diameter: 40 mm Speed: 8,000 rpm Tool swing diameter: 112 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable to tool swing diameter and swivelling away from tool, spring-loaded 6th spindle, bottom, 4.0 kW ----- Diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 112 - 250 mm Max. profiling depth: 15 mm Axial adjustment: 45 mm Spindles - General ----- All profiling spindles with high concentricity. Lubrication points for axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed steplessly adjustable 5–24 m/min Infeed roller in front of 1st bottom tool, pneumatically controlled high/low Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Feed roller adjustment relative to left spindle, axial 35 mm Machine electrics ----- Operating voltage: 440 V (voltage range 380 - 420 Volt), 50 Hz Machine base, tables, and fences ----- Jointer table 2.0 m long (incl. straight edge) Manual Waxilit pump for table de-resining One powered rubber roller (spring-loaded in outfeed table) Two powered rollers in machine table, hardened Machine operation ----- Pressure shoe in front of top spindle with mechanical digital indicator Ejection after top spindle with mechanical digital indicator ATS/system, automatic 2-axis positioning for spindles no. 3 and 5 Min. working height: 12 mm Electric height adjustment for top spindles and feed Centralized lubrication points located at machine front Electronic digital displays at spindle 3 and 5 (axial), spindle 6 (radial), and spindle 4 (axial and radial) Safety and sound insulation ----- Full safety enclosure Easily high...

Būklė: naudotas, Velenų skaičius: 6 vnt. Darbinis plotis: 230 mm Lhjdpfx Ajv Ec Ntsh Uog Obliavimo aukštis: 160 mm Lyginimo stalo ilgis: 2 500 mm Padavimo variklis: 5,5 kW Weinig Unimat 23E obliavimo ir profiliavimo automatas keturpusiam obliavimui ir profiliavimui medienai, su griovelio lova trumpiems ir lenktiems ruošiniams, mobiliu velenu ir ilgu lyginimo stalu. Horizontalių velenų ašinė eiga: 45 mm Vertikalių velenų ašinė eiga: 80 mm Trumpų detalių paketas: taip Griovelio lova: taip Griovelio lovos freza: įtraukta Velenas 1: apatinis / 5,5 kW / 50 mm Velenas 2: dešinysis / 11 kW / 50 mm Velenas 3: kairysis / 11 kW / 50 mm Velenas 4: viršutinis / 5,5 kW / 50 mm Velenas 5: viršutinis / 5,5 kW / 50 mm Velenas 6: apatinis / 5,5 kW / 50 mm Valdymas: mobilus velenas

Būklė: naudotas, Gamybos metai: 2004, Planer and moulding machine Weinig Powermat 2000 PowerLock Technical specifications Working width: 30 - 300 mm Working height: 19 - 200 mm First bottom spindle: Motor with brake: 18.5 kW Speed: 8000 rpm Tool diameter: 125 - 180 mm Second spindle: First right spindle: Motor with brake: 15 kW Lsdpfeunbrbjx Ah Ujhg Tool diameter: 93 - 200 mm Third spindle: First left spindle: Motor with brake: 15 kW Tool diameter: 93 - 200 mm Fourth spindle: First top spindle: Motor with brake: 37 kW Tool diameter: 93 - 200 mm Fifth spindle: Second bottom spindle: Motor with brake: 22 kW PowerLock tool holder Speed: 8000 rpm Tool diameter: 93 - 225 mm Feed system: Frequency-controlled feed, infinitely variable 6 - 36 m/min.

Būklė: paruoštas naudoti (naudotas), Weima WLK 12 Techninės specifikacijos Variklio galia: 100 AG (75 kW) Lhodjw U Txuspfx Ah Uog Pateikimo anga: apie 1 920 × 1 800 mm (6,2′ × 5,9′) Rotoriaus skersmuo: ~368 mm (14,4″) Rotoriaus plotis / ilgis: ~1 200 mm (47,2″)

Būklė: labai geros būklės (naudotas), Four-Sided Planer Weinig H30N Working width: 300 mm Lhjdsumtlqjpfx Ah Uog Working height: 200 mm Number of spindles: 5 Spindle arrangement: Bottom spindle: 11 kW Right spindle: 11 kW Left spindle: 11 kW (spindle angle adjustable up to 90°) Right spindle: 7.5 kW (spindle angle adjustable up to 45°) Top spindle: 11 kW Feed speed adjustable via variator up to 22 m/min Feed motor power: 9 kW Work table drive system: - 3 rows of knurled feed rollers before the first cutter head - 5 rows of smooth feed rollers Top drive: - 9 rows of feed rollers Machine weight: 6100 kg Machine dimensions: 470 x 190 x 160 cm (H)