BDF sistema

MERCEDES-BENZ ACTROS 2540 GIGASPACE 6X2

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SK-K-24001, 1 optimized cross-cutting line with scanner Manufacturer: Dimter Model: OptiCut 450 Year of manufacture: 2015 Item no.: SK-K-24001 DIMTER cross-cutting system with 1 x OptiCut 450 and feeding system F 100 Bsdpfx Ajwya Sysg Rjdk featuring LuxScan CombiScan+ C 200 with curvature measurement The system was operational until 2024, has been professionally dismantled, and can be inspected in this condition.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus,

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, For sale: Bsdpfx Agjw D Upuj Rodk 4 Weinmann butterfly tables with a length of 10.5 m and a width of 3.2 m. WMS150 multifunction bridge with 3 tool holders, saw, and milling cutter.

Sąlyga: paruoštas naudoti (naudotas), Technical characteristics: Bdsdjt T U E Sopfx Ag Rek Multifunctional bridge mechanization CNC machining Frame assembly line with 3 assembly tables, 50 meters long Nice unit, in very good condition, to be dismantled on site Power and Motors: Overall dimensions:

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, paskutinio kapitalinio remonto metai: 2022, Parduodama pilna BSH gamybos linija. Įrenginį sudaro System TM tiekimo sistemos, Keilzinken Technik NKT, HIT automatizacija (daugiapakopis sandėliavimas, transportas, lamelių tiekimo remonto stotis, obliavimas ir Kallesoe ir kt.). REX obliavimo staklės: priešoblius, lamelių oblius ir finišo oblius. Aukšto dažnio presas iš Kallesoe. 2 silosai. Bjdpfx Aewgccheg Rsdk

Sąlyga: labai geros būklės (naudotas), Rąstų žievinimo įrenginys VK450 2RE. Įrengtas dviem rotoriais. Vienas yra kelmo frezos rotorius. Kitas – žievės šalinimo rotorius. Min-max rąsto diametras 8–45 cm. Minimali rąsto ilgis 3 m. Komplekte su originaliu VK centrinančiu konvejeriu. Bus parduodamas po kapitalinio remonto. Bdsdpfx Agoulv Hzo Rek

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit Bdedpfxeu D Amgj Ag Rjk • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Sąlyga: naudotas, Gamybos metai: 2001, Wood dimensions to be processed: Incoming lengths min/max: 500 – 6500 mm; Full optimization up to max. 1500 mm. Incoming widths min/max: 40 – 300 mm. Incoming thicknesses min/max: 15 – 120 mm. Maximum wood cross-sections: 300 x 40 mm, max. 200 x 120 mm. Fixed lengths after saw: min. 510 – 2800 mm. Special application: Cutting of blocks, length min/max: 100 – 200 mm (Note: multiple block length during sorting, blocks are transported to the end of the sorting line and drop into customer-side mesh boxes). Cut/trimming tolerance: +/- 0.8 – 1.5 mm (for wood with minimum resin content and even surface. Tolerance up to 1 m fixed length, max. tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm. Curvature of wood in all directions: max. 10 mm per meter length. Types of wood: Softwood or hardwood. Machine performance: Feed speed continuously adjustable up to max. 230 m/min; cutting cycle 0.6 – 1 s. To determine the practical daily output, an effectiveness factor dependent on the customer’s production conditions must be considered. Infeed and saw working height: 900 mm (install required on customer-side platform, saw requires concrete base). Sorting working height: 2000 mm. Connection values: Total electrical connection load approx. 18 kW. Operating voltage: 380 Volt / 50 Hz. Voltage fluctuations max. 5 %. Air consumption approx. 1200 NL/min. Operating pressure approx. 8 bar. Extraction velocity approx. 30 m/s. Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B. POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge. Bdedpjw Sy T Hofx Ag Rok Pos. 2: Support roller without drive, at the end before steel table for easier feeding. Pos. 3: Length measuring station with built-in fluorescence camera for detecting defect markings. Pos. 4: Automatic non-contact width measurement. Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with built-in waste chute incl. equipment package for large wood cross-sections. Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and plant control. The following are available for processing: - max. 16 product groups - max. 8 qualities per product group - max. 200 fixed lengths per product group. Pos. 6: Discharge conveyor belt as sorting station with drive unit, length 7500 mm. Pos. 7: 2 ejectors mounted on discharge conveyor belt. Location: Nattheim

Sąlyga: labai geros būklės (naudotas), veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, Automatic Finger Jointing Line Grecon Dimter Ultra Machine after comprehensive overhaul. Specification: Tenoner: Saw Spindle: - Spindle speed: 3,000 rpm - Saw motor power: 6 kW - Chip extraction: Ø100 mm Milling Spindle: - Arbor diameter: Ø50 mm - Usable arbor length: 210 mm - Max. tool diameter: Ø250 mm–Ø150 mm - Spindle speed: 6,000 rpm - Milling motor: 15 kW / 3,000 rpm - Chip extraction: Ø150 mm Feed Table: - Minimum board length: 150 mm - Maximum board length: 700 mm - Working feed: Infinitely adjustable Dust Extraction: Chipper extraction duct diameter: Ø100 mm Milling head extraction duct diameter: Ø150 mm Dust extraction capacity (flow rate): ~2,400 m³/h Pneumatic System: Operating pressure: 6 bar Air consumption: ~2.5 m³/h at 6 bar (15 Nm³/h) Longitudinal Finger Jointing Press CONTI M 6/6000: Press: - Loaded strip width: 25 – 160 mm - Finished strip length: approx. 6,000 +15-50 mm - Pressing force: 3 – 7.5 T (3,000 – 7,500 daN) Circular Saw: - Saw blade diameter: Ø400 mm - Spindle diameter: Ø30 mm - Motor: 4 kW / 3,000 rpm Bdodpfsuddvaox Ag Rjk Extraction: - Saw extraction duct diameter: Ø100 mm - Extraction capacity (flow): ~400 m³/h Pneumatic System: - Operating pressure: 6 bar - Air consumption: ~2.5 m³/h at 6 bar (15 Nm³/h) Scope of Overhaul Works: 1. Cleaning machine bodies and application of new paint 2. Replacement of bearings with new ones: main spindle of the tenoner; saw unit spindle of the press; linear bearings on the carriage table guide of the tenoner; bearings on the working conveyor belts. 3. Installation of a new glue nozzle with 3.8 mm spacing on the tenoner body, assembly of a glue tank with a safety valve. 4. New conveyor belts 5. Replacement of wiring on machine bodies 6. Replacement of pneumatic tubes for actuators, solenoid valves and other pneumatic components 7. Replacement of gears and duplex chain on the press’s chain/belt feeder 8. Overhaul of electromagnetic brakes on the tenoner 9. Replacement of seals and O-rings (repair kits) in pneumatic actuators; replacement of worn solenoid valves with new ones 10. Replacement of graphic operator panels on the tenoner control cabinet, on the press control cabinet, and on the small press panel 11. Replacement of buttons, indicator lights, and switches on operator panels and control boxes; replacement of terminal boxes 12. Replacement of controllers overseeing the operation of the tenoner and press with new ones and adaptation of the machine’s control program to user requirements 13. Installation of new frequency inverters on the press rollers and on the push bar of the outfeed table 14. Servicing of electrical installations in control cabinets, modernization and preparation of updated wiring diagram 15. Installation of guards, meshes, and necessary descriptions, labels, safety signs, manufacturer logo, and nameplates 16. Replacement of V-belts with new ones, inspection of pulleys, geared motors, and electric motors 17. Replacement of limit switches, inductive and optical sensors (photo sensors) We specialize in finger jointing machines. Installation, commissioning and operator training within Poland included in price; in other countries, for an additional fee. Service and spare parts support provided.

Gamybos metai: 2000, Sąlyga: geras (naudotas), EWD Combimes apkantavimo linija. Pagaminimo metai 2000, tipas DK90-TL. Medžio padavimas iš kairės. Didžiausias apkantavimo plotis 500 mm, didžiausias storis 120 mm. 90 kW variklis. Takto dažnis su 4,0 m ilgio medžiu apie 18 vnt./min. Komplektuota su originalia EWD valdymo sistema. Pristatymas nuo kaupiklio konvejerio prieš atskyrimą iki skutelių separatoriaus įskaičiuotas. Įrenginys pilnas, geros būklės. Bjdjxcwvxopfx Ag Rjdk