Trenčeris

Ridder greppelfrees TK 45

Sąlyga: naudotas, Gamybos metai: 2024, veikimo valandos: 365 h, mašinos/transporto priemonės numeris: 36374, kuro tipas: dyzelinas, Tuščias svoris: 3.425 kg Kėlimo galia: 250 kg Darbo aukštis: 2.700 cm Priekinių padangų būklė: 0 Tedpfx Agevf T U To Rof Galinių padangų būklė: 0 Maksimali horizontali siekis: 1.700 m Transportavimo matmenys (Ilg. x Pl. x Auk.): 7,69x2,2x2,98 m Dėl daugiau informacijos kreipkitės į PFEIFER GROUP.

Sąlyga: naudotas, Gamybos metai: 2024,

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, veikimo valandos: 3 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 237042, galia: 25 kW (33,99 AG), bendras svoris: 1 575 kg, kuro tipas: elektrinis, spalva: geltonas, From personal experience: The battery easily lasts an entire working day even under continuous operation. Internal reference number: M1241 Manufacturer: Schliesing Vehicle type: Trailer chassis Drive type: Electric Maximum log diameter: Ø 20 cm Feed width (mm): 240 Motor power: 25 kW – Torque: 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Net weight (kg): 1575 Equipment: Power Control System – Whisper Cut Chipper System Schliesing’s mid-range is now also available as an electric chipper – the Schliesing 325MX-E. The powerful, brushless asynchronous motor delivers 25 kW and 120 Nm of torque, ensuring productive work with the typical pulling power you expect. The batteries are designed to allow a full day of operation without recharging. The 325MX-E enables emission-free chipping at low noise levels while delivering uncompromised productivity with trunk wood up to 20 cm diameter. Engine and Chassis: – Brushless asynchronous motor, 25 kW, 120 Nm torque – Fully galvanized, corrosion-resistant single-axle chassis certified for 80 km/h including EU homologation – Robust, fixed and widened steel mudguards – Heavy-duty front jockey wheel and rear support stand – Hitch with overrun brake and Soft-Dock ball coupling or DIN towing eye – LED lighting to StVZO specifications (impact-protected) – Pneumatic tyres 205/65 R15 C Battery: – LEP battery (lithium iron phosphate) with 300 Ah capacity at 96 V – Enables full-day operation without recharging; no recharging required during long idle periods – Energy recuperation via kinetic energy recovery from the flywheel during operation – Charging port: Schuko connector 220–240V/16A – Full charging time: 8 hours – Warranty for 1,000 charging cycles at 80% SOH (State of Health) Housing / Hopper / Discharge Chute: – Foldable infeed hopper, minimum 1,500 mm feed depth – Fully galvanized, corrosion-resistant hopper flap – Hopper dimensions (interior): width = 1,040 mm, height = 960 mm – Swiveling discharge chute with adjustable deflector flap – Discharge chute mounted on ball-bearing slewing ring – Key machine parts soundproofed (especially chipper hood and discharge chute) Tsdpfxsvmz N Uo Ag Rof – Two emergency stop buttons, one on top of the hopper, one on the side of the hopper flap Chipping Unit: – Chipping unit with safety interlock according to EN 13525 – Heavy-duty flywheel Ø 655 mm, 35 mm thick – Enclosed knife system for quick, safe, and precise knife changes – Continuously adjustable chipping knives – Knives can be re-sharpened multiple times for extended service life (approx. 10x) – Horizontal counter blade and vertical counter edge, both dual use for prolonged service life – Wrap protection on the main bearing of the flywheel Hydraulic Feed: – Feed control with independent hydraulic circuit – PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive, and even feed due to individual oil motors for each roller – Parallel-guided upper roller for regular and even material feed, preventing jamming or skewing – Hydraulically adjustable feed speed for variable chip size – Hydraulic oil tank level indicator OPTION OVERVIEW: Whisper Cut® V-shaped knives feed timber more evenly and with less vibration In combination with the centering PowerGrip roller, material is reliably guided with minimal jarring during chipping

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 050189, for slot width: 13 - 30 mm for slot depth: 22 - 35 mm Cutter speed approx.: 1200 rpm Tjdpfjb Amlhox Ag Rof Drive motor: AC 220 V, 1020 W Weight: approx. 6 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 3 h, Funkcionalumas: visiškai funkcionalus, galia: 33 kW (44,87 AG), bendras svoris: 1 570 kg, kuro tipas: dyzelinas, spalva: originalus, ašių konfigūracija: 1 ašis, kuras: dyzelinas, Schliesing 325EX-D Chipper: The Compact Model with Rotatable Chipping Unit The Schliesing 325EX-D chipper is a powerful wood chipper, featuring a robust engine, flexible feed options, and a durable design, making it ideal for demanding wood processing applications. With a swiveling infeed chute and a range of safety features, it meets the highest standards and offers an efficient solution for processing logs up to Ø 20 cm in diameter. Technical Data: Type: Schliesing 325 EX Log Diameter: Up to Ø 20 cm Infeed Width: 24 cm Engine Output: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Engine and Chassis: • Water-cooled, Stage V Kubota 4-cylinder common-rail turbo diesel engine with DPF, delivering 33 kW / 44.9 HP. • Industrial overrunning clutch between engine and chipping disc to protect the engine, bearings, and shaft. • Fully galvanized, corrosion-resistant single-axle chassis rated up to 80 km/h with EU type approval. • Robust, fixed steel mudguards. • Front jockey wheel and rear support stand. • Road lighting according to StVZO with impact-protected components. • Pneumatic tyres 205/65 R15C with EU type approval. Body/Chute/Discharge Spout: • Folding infeed chute with a minimum feeding depth of 1,500 mm. • Fully galvanized chute flap for longevity. • Chute dimensions (internal): Width = 1,040 mm, Height = 960 mm. • Swiveling discharge spout with adjustable deflector flap. • Discharge spout mounted on a ball bearing slewing ring for flexible orientation. • Sound insulation on critical machine components such as the chipping hood and discharge spout. • Emergency stop button both on top of the feed chute and on the side of the chute flap. Chipping System: • Rotatable chipper housing with adjustable feeding angle up to 270°. • Safety circuit compliant with EN 13525. • Chipping disc with a diameter of Ø 655 mm and a thickness of 35 mm. • Enclosed knife system for quick and safe knife changes. Todpfov Ev E Uox Ag Ref • Steplessly adjustable chipper knives, each regrindable multiple times for long service life. • Horizontal counterblade and vertical countershear, each double-sided for extended durability. • Anti-wrap protection on the main bearing of the chipping disc. Hydraulic Infeed: • Infeed control with independent hydraulic circuit. • PowerGrip feed roller (240 mm wide) with hydraulic infeed for strong and consistent material feed. • Parallel guidance of the upper feed roller for even feeding without skewing. • Hydraulically adjustable feed speed to control chip size. • Level indicator for the hydraulic oil tank.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, galia: 55,4 kW (75,32 AG), bendras svoris: 2 050 kg, kuro tipas: dyzelinas, spalva: originalus, ašių konfigūracija: 1 ašis, darbinė masė: 2 050 kg, tuščias svoris: 2 050 kg, kuras: dyzelinas, Technical Data: Round timber up to 24 cm Feed width 300 mm Base weight approx. 2050 kg Year of manufacture: 2022 4-cylinder Hatz turbo diesel engine Tjdpfx Agjv Evx Us Rjf With common-rail technology and diesel particulate filter Complies with EURO 5 emissions standard. Mounted on a single-axle chassis for 80 km/h Power Control System Water-cooled 4‑cyl. Hatz turbo diesel engine, 55 kW (74.8 HP), with common-rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Tow bar with overrun brake Front jockey wheel Rear support stand Lighting according to German StVZO (impact protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of feed speed and thus chip size Chopping knives resharpenable multiple times for long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic infeed Particularly grippy, aggressive, and uniform feed, each roller powered by its own hydraulic motor Discharge chute with adjustable spreader flap, swivel-mounted Discharge chute on ball bearing turntable Relevant machine parts with sound insulation Features: Engine and Chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, produces 55.4 kW (75.3 HP). Automatic industrial freewheel clutch between engine and chipping disc protects the engine, bearings, and shaft. Fully galvanized, corrosion-resistant single-axle chassis, approved by TÜV, for speeds up to 80 km/h. Sturdy, fixed steel mudguards. Provisions for front jockey wheel and rear support stand. Height-adjustable tow coupling with overrun brake and soft dock ball hitch or DIN towing eye. Lighting as per StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/Hopper/Discharge Chute: Rotatable chipper housing with adjustable feed angle up to 270°. Foldable feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (internal): width = 1,160 mm, height = 1,040 mm. Swiveling discharge chute with adjustable spreader flap. Discharge chute on ball bearing turntable for flexible orientation. Sound insulation on relevant machine components, such as the chipper hood and discharge chute. Emergency stop button located on top of the hopper and on the side of the hopper flap. Chipping System: Safety circuit compliant with EN 13525. Chipping disc with a diameter of Ø 800 mm and a thickness of 40 mm. Closed knife system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable multiple times for long service life. Horizontal counter blade can be used 4 times; vertical counter blade can be used 2 times, for extended service life. Wrap protection at the main bearing of the chipping disc. Hydraulic Feed: Infeed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic infeed for reliable and consistent material transport. Parallel guide for the upper roller ensuring even feeding without skewing. Hydraulically adjustable feed speed for controlling chip size. Level indicator for the hydraulic oil tank.

Sąlyga: naujas,

Gamybos metai: 1997, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 540897, Maximum pipe diameter: 1,500 mm Minimum pipe diameter: 200 mm Maximum tool diameter: 200 mm Feed rate: 40 mm/min Sawing of steel and grey cast iron pipes up to 22 mm wall thickness Tsdpfx Ajghy Azjg Rjf Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed: 35 m/min Compressed air requirement: 6 bar – 2 m³/min Weight: approx. 90 kg

Sąlyga: naujas, High-quality wood chipper for professional use – No problem with heavily branched material! Thanks to its road approval, the HX16 Pro can be transported quickly and easily to any location. The HX16 Pro wood chipper is specifically designed for professional applications, offering a robust construction and powerful drive system to effortlessly process even heavily branched material. This chipper easily handles logs with an impressive diameter of up to 16 cm. It is powered by a robust 35 HP Rato petrol engine and features a no-stress automatic feed system that prevents engine stalling under overload and ensures smooth operation. The HX16 Pro comes equipped with an "AL-KO" chassis and a lighting system to meet all your requirements. Here are the outstanding features of the HX16 Pro wood chipper: - Maximum log diameter: 16 cm - Feed opening: 16.5 cm x 30 cm - 35 HP Rato petrol engine - No-stress automatic feed system - Hydraulic feed - Weight: 730 kg Experience the performance and reliability of a professional wood chipper with the HX16 Pro. Tjdpetr Azgjfx Ag Rsf Contact us for a customised offer!

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 55 kW (74,78 AG), kuro tipas: dyzelinas, darbinė masė: 3 500 kg, Gamybos metai: 2020, veikimo valandos: 110 h, Rubber track dimensions: 250 x 52 x 72 mm Engine manufacturer: Kubota V3307 CR TE4BE Operating weight: 3,500 kg Tsdpfjwvt S Sex Ag Rsf Dimensions: 4,266 x 1,100 x 1,950 mm (LxWxH) Control: Radio remote control Trenching width: 50 to 120 mm Travel speed: 0 to 4 km/h Trenching depth: 200 to 540 mm Engine power: 55.4 kW