Konvencinė apskritiminė šlifavimo staklė - Servogrind® RSM 1000 NC

Knuth Servogrind® RSM 1000 NC

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year 2007 – Fanuc 21i-TB 1 External Grinding Spindle Country of Manufacture: Switzerland Voltage: 380/50/3 Net Machine Weight: 4000 kg Pgsdpfx Afew T Sh Ejwew TECHNICAL SPECIFICATIONS Distance Between Centers: 600 mm Center Height: 175 mm Maximum Workpiece Weight: 80 kg Longitudinal Slide Z Maximum Travel: 800 – 1150 mm Speed: 0.001 to 10,000 mm/min (early 2000s model: 0.001–5,000 mm/min) Resolution: 0.0001 mm Transverse Slide X Maximum Travel: 285 mm Speed: 0.001 to 20,000 mm/min (early 2000s model: 0.001–10,000 mm/min) Resolution: 0.0001 mm Wheelhead (Universal Version) Swivel Range: -15 to 225° (early 2000s model: -15 to 195°) Swivel Axis: 2.5 / 1° Hirth Drive Power: 7.5 or 9 kW or 11 kW Grinding Wheel: 500x63 (80/110F5) x203 mm Workhead Speed: 1 – 1,500 min⁻¹ Taper: MT4 or MT5 / ISO 50 Drive Power: 1.6 or 3.0 or 4.0 kW Tailstock Taper: MT3 or MT4 Quill Stroke: 35 / 50 mm (early 2000s model: 35 mm) Quill Diameter: Ø 50 mm Fine Adjustment: +/- 40 µm Controller: Fanuc 21i-TB All technical data is provided without guarantee, subject to errors and omissions.

Sąlyga: geras (naudotas), Gamybos metai: 1990, CNC cylindrical grinding machine Manufacturer: TSCHUDIN Type: HTG 22 - 862, Year 1990 Equipped with MARPOSS E14 control system and E5 measurement-control system. Centre distance: 650 mm Centre height: 100 mm Grinding length: 620 mm Weight: approx. 4,500 kg. For further details, see: TECHNICAL DATA SHEET Includes numerous grinding wheels and holders. Podpfeid Aphox Afwsgw Complete machine documentation available. Machine in stock.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, veikimo valandos: 36 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: Pedpfxew T Sc No Afwegw MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Max. travel: 420 mm Minimum automatic travel: 1 mm Traverse speed: 100–3500 mm/min Reversal delay: 0–5 sec. Maximum table swivel 400/650 mm: 30°/15° TRANSVERSE SLIDE: Max. travel: 170 mm Rapid traverse: 30 mm Plunge depth in diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm GRINDING SPINDLE HEADSTOCK: Wheel: dia. x width x bore: 350x32x127 mm Drive power: 3 kW Peripheral speed vs: 30 m/s Spindle speed: 1600/1975/2200 rpm Manual traverse: 120 mm Swivel to the right: 15°/30° Optional guard for wheel pack, max. width: 50 mm WORKPIECE HEADSTOCK: Swivel range: 0°–90° Speeds nw: 80/175/380/800 rpm Internal taper: Morse 4 Clamping collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Load during external grinding: 12 Nm Continuous drive option, speed range I: 30–300 rpm Continuous drive option, speed range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill stroke: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centers: 400 mm Measured over 400 mm: 0.002 mm Between centers: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for external grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage fluctuations: –15% to +10% Permissible frequency fluctuations: +/- 3% Compressed air: 5 bar Unless otherwise stated, the technical data is provided without obligation and subject to errors or omissions.

Sąlyga: geras (naudotas), Gamybos metai: 1988, Spindle Speeds: 170 - 18,000 rpm Machine Weight: approx. 7.5 t Space Requirements: approx. 5.00 x 4.00 x 2.20 m - Control system retrofit (2014) to Siemens Sinumerik 840D Solutionline - Overhaul of the new control system in 2016 Technical Specifications: Pedpfx Afjw Intaowjgw - Grinding diameter: 20 - 300 mm - Swing diameter: 350 (500) mm - Workpiece length: 300 (1300) mm - Recommended grinding depth up to: 300 mm - Grinding Table Travel Z-Axis (total): 650 (950) mm - Resolution: 0.001 mm - Rapid traverse: 12 m/min - Grinding stroke speed: 0 - 9.99 m/min - Feed rate: 0 - 99.99 m/min - Step feed value during reversal: 0 - 0.999 mm - Grinding Table Travel X-Axis (total): 150 mm - Resolution: 0.001 mm / Ø - Rapid traverse: 5 m/min / R - Grinding stroke speed: 0 - 5 m/min / R - Feed rate: 0 - 99.99 m/min / R - Step feed value during reversal: 0 - 0.999 mm / Ø - Swiveling range of the workpiece spindle head: - B-Axis: -32° (-23°) / +2° - Resolution: 0.0001° (0.36") - Travel U-Axis (total): 300 mm - Resolution: 0.001 mm / Ø - Travel speed: 5 m/min - Center height above workpiece table: 200 (300) mm - Center height above grinding table: 330 (430) mm - Workpiece spindle bore: 50 (70) mm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 029.0118, centro aukštis: 125 mm, atstumas tarp centrų: 400 mm, Used machine in full working condition. Functions and machine have been inspected by a Studer technician. Technical specifications according to separate PDF. Podpfxowqlgde Afwsgw

Sąlyga: naudotas, Gamybos metai: 2003, Grinding diameter: 450 mm Grinding length: 1500 mm Center height: 225 mm Photos show a nearly identical machine with 1000 mm capacity Also geometrically overhauled and partially repainted. Included accessories: - 1x Grinding wheel setup LEFT 500x80x203.2 mm - 1x Grinding wheel setup RIGHT 400x63x127 mm - 1x Internal grinding device Ø120 mm for 2 HF spindles (motor spindle and HF spindle) Pedsxflcrepfx Afwegw Center height: 225 mm Grinding head motor: drive power 9.2 kW B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35 m/s or 45 m/s, speed of grinding spindle adjustable via CNC control (standard) Semi-automatic balancing device, ELASO, type EB 500 MFV 1230: high-frequency internal grinding spindle with oil-air lubrication High-performance motor spindle M34-FAVY100.R620-20/4 with permanent grease lubrication Balancing arbor Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock Micro adjustment on the tailstock Pneumatic relief for the tailstock Tailstock park position Standard workpiece headstock MK5 CNC-controlled C-axis for standard workpiece headstock Sine bar for direct angle measurement using gauge blocks Wide adjustment, swivel-type base for the standard workpiece headstock Reinforced workpiece headstock MK5 CNC-controlled C-axis for reinforced workpiece headstock Fixed base for the reinforced workpiece headstock Coolant supply through the workpiece spindle Dressing device on lower table – with 2x 0053.05 and 2x 0053.20, located behind the workpiece headstock and tailstock Dressing device on upper table – with pos. 1x 0053.01, 1x 0053.03, 1x 0053.13 Preparation for later connection of the HF dressing unit for rotary dressing tools (RENAUD) Adapter plate for universal use of the HF dressing unit, internal and external KELPOS: active longitudinal positioning MOVOMATIC GAP: infeed sensor MOVOMATIC KELSET: tool measuring system KELSET, MARPOSS 1900 liters: endless belt filter with lift station, 100 l/min at 2.0 bar, designed for 2 machines Full enclosure Enclosure with service doors left and right Electrical interlock for the side door (grinding wheel change) Preparation for customer-side connection of a grinding mist extraction unit Chiller for cooling the H2O circuit (grinding head and HF spindle) Control cabinet lighting with door switch Data according to delivery note. All specifications subject to change without notice.

Sąlyga: naudotas, Gamybos metai: 2000, šlifavimo skersmuo: 340 mm, ruošinio svoris tarp centrų: 80 g, valdiklių gamintojas: GE FANUC, valdiklio modelis: 16IT, CONTROL SYSTEM .. CNC control: GE FANUC 16IT Podpfjxun E Usx Afwogw WORKING AREA - CYLINDRICAL GRINDING .. Max. swing diameter: 340 mm .. Max. workpiece weight between centers: 80 kg WORKING AREA - EXTERNAL GRINDING .. Max. grinding diameter: 340 mm .. Grinding length: 650 mm WORKPIECE SPINDLE STOCK .. C axis: yes TAILSTOCK .. Max. center distance: 650 mm GRINDING SPINDLE STOCK .. X-axis travel: 370 mm .. Z-axis travel: 800 mm .. Swivel range (B-axis) from: -30° .. B-axis rotary range up to: 225° .. Speed range from: 1 rpm .. Speed range up to: 1500 rpm GRINDING WHEEL .. Grinding wheel type: disc .. Max. diameter: 500 mm .. Bore diameter: 203 mm .. Width: 63 mm INTERNAL GRINDING SPINDLE STOCK .. Max. speed: 30,000 rpm ELECTRICAL CONNECTION DATA .. Connected load: 20 kVA .. Supply voltage: 400 V .. Mains frequency: 50 Hz DIMENSIONS / WEIGHT .. Required space (left/right): 5,000 mm .. Approx. total weight: 9,500 kg ADDITIONAL EQUIPMENT (GRINDING) .. Internal grinding spindle: yes Equipment: 2 external grinding spindles 1 internal grinding spindle Fischer MFV 1230, 30,000 rpm - C-axis for cam or polygon grinding (incl. HSM option) - Dressers: 1x fixed diamond at the wheelhead, 1x dressing spindle at the wheelhead, 1x swiveling dresser - Studer Quickset - Movomatic ES400 interface for measuring unit (without probe) - 1 tailstock - 1 swiveling dresser - Machine can be retrofitted for chuck operation - Without coolant management system, as it is connected to a central unit

Sąlyga: dilaminuotas dirbtuvėje (naudotas), KELLENBERGER KEL-VISTA UR 175X600 yra CNC apvalaus šlifavimo staklės, skirtos dideliam tikslumui, precizikai ir patikimumui. Galimybės: centrų aukštis – 175 mm; centrų atstumas – 800 mm; šlifavimo ilgis – 600 mm; maks. skersmuo – 349 mm; didžiausias ruošinio svoris – 100 kg. Pagrindiniai duomenys: Z – 750 mm; X – 320 mm; diskai: L – Ø400×80×127, R – Ø300×40×127; šlifavimo disko greitis – 875–1900 min⁻¹ (be pakopų); šlifavimo variklis – 5 kW; ruošinio velenas – 8–800 min⁻¹; greitasis eiga – 12 m/min; 3×400 V, 50 Hz; svoris – apie 3000 kg; matmenys – 3200×1700×2000 mm. Priedai: aušinimas, aukšto slėgio aušinimo sistema, popierinis filtras, MARPOSS jutiklis, MOVOMATIC matavimo valdiklis, vidinio šlifavimo įranga, balansavimo įrenginys, RS-232 jungtis. Tinka automobilių, laikrodininkystės, aviacijos, medicinos technologijų sritims, kur reikalingos itin tikslios tolerancijos. Psdpfx Ajxx U Tasfwjgw

Sąlyga: naudotas, The STUDER S41 is a CNC cylindrical grinding machine engineered for precision, high accuracy, and reliability. Capacities: centre height 275 mm, centre distance 1000 mm, maximum workpiece diameter 550 mm, workpiece length 1000 mm, Z-axis travel 1150 mm, X-axis travel 350 mm, maximum workpiece weight 250 kg. Technical specifications: grinding wheel Ø500×100 mm, circumferential speed 50/80 m/s, spindle speed 0–4500 rpm, grinding spindle swivel -45/+225°, workpiece spindle drive 15 kW, 3x400 V 50 Hz, compressed air 5 bar, quill stroke 60 mm (Ø 60 mm), machine weight approx. 9000 kg. Equipment: high-resolution C-axis, axes B1+B2, coolant system, internal grinding device, 2 spindles, lighting, status indicator, PC system, electronic hand control, foot pedal. Achieves tight tolerances; suitable for automotive, aerospace, toolmaking, medical technology, and watchmaking industries. Psdpfx Afjxx U Dfewsgw

Sąlyga: naudotas, The STUDER CT 960 is an internal cylindrical grinding machine that offers precision, high accuracy, and reliability. Machining data: center height 150 mm, grinding length 150 mm, X/Z axis travels 400 mm, grinding wheel diameter 250 mm, spindle bore 35 mm; B-axis +61/-91°, rotatable -5/+275°, turret with 4 spindles. Technical specifications: spindle speeds 6,000 / 45,000 / 60,000 / 90,000 rpm; X/Z feeds 12 m/min; compressed air 6–10 bar; 3x 400 V 50 Hz; total power consumption 34 kVA; weight approx. 4,050 kg; dimensions L 3,218 × W 2,256 × H 2,300 mm. Accessories: cooling system, measuring probe, diamond dressing unit, spindle cooling, flange sets, tool holders, 3-jaw chucks Ø100/125/160, magnetic chucks Ø125/300, tool cabinet, lighting, fire extinguishing system, and much more. Enables tight tolerances; suitable for the automotive industry, watchmaking, toolmaking, aerospace, and medical technology. Pgedpfx Afexx U Auowsw